Revision level changes in PO

Hi ,
This is regarding the " PO output that is sent to vendor which is deviated from print preview copy"
The material mentioned in line item of  a PO  shows Revision as " Rev. 02"  in the PO .In System Print preview output, the line item shows revision  as "Rev. 02" while the vendor is receiving a PO copy of  "Rev 01".  Can any one help me to how to change revision level in output also to "Rev 02".
Thanks in advance,
Rajeev.

Hi,
I have took the Print out of the PO from my system and the Revision level of the material is " Rev 02" . I also collected the PO from customer which was trigerred to him directly after i  create a PO. The material is shown as " Rev 01" in the customer PO. Can any one clarify me how to show "Rev 02" for the material in the customer PO also?.
Thanks
Rajeev

Similar Messages

  • Revision Level not coming

    While creating a Material using T-Code MM01 in Basic data 1 there is
    one button Create Material Revision Level : change Number
    My requirement is ,While creating PO , when u give part number,
    Revision Level is given A,B.
    Print out of the PO is showing Matrerial number and Revision Level.
    Ex M1234 B
    But when u create a schedule Monthwise in that case it is not showing
    Revision Level.
    Ex M1234  ( in this case B is missing )
    How to get the Revision Level in schedule.

    Hi,
    When u press the F1 key on Create Revision Level / display Revision Level
    The technical information (F1)  is    :
    Function data
    Program         SAPLMGMM
    Function        RLVA
    Where  is SAPLMGMM FunctionPool (System-defined Include-files.)
    and when u double click on RLVA the it dispaly
    User interface                 SAPLMGMM                       Active
    Menu bar                         Main Screens (Except Long Text Screens) (Without "Goto")
    Application toolbar          Main Screens (Except Long Text Screens) (Without "Goto")
    Function keys                 Data Screens Except Long Text Screens
    not getting the point. My problem is while creating Purchase Order Revision Level is coming with Material like ( M100  B)
    while creating Scheduling agrrement Revision Level is not coming ( M100    )

  • DIR - Change Revision Level

    Hello Friends,
    How can I change the revision level of a DIR without creating a new version?
    Per config, when I create a DIR it is assigned a rev level "-". Then I want to change it to an higher level "A" or "B" or whatever.
    I am using BAPI_DOCUMENT_CREATE2 and BAPI_DOCUMENT_CHANGE2 for my process. Eventhough I pass a different rev level, SAP creates the DIR always with the first revision level per the config, which in our case is "-".
    Any input/advise on this issue will be greatly appreciated!
    Thanks,
    Sam

    Revision level has to be changed using a separated function call - REVISION_LEVEL_UPDATE

  • Manual Change Revision Level in Production Order

    Dear guru ,
    The revision level in the production order (for material to be produced and for the component)  isn't manual changeable.
    Does exist a chance for a manual change of revision level ?
    Thanks in advance.

    Dear Suresh ,
    i know the link with ECM. In production order i can change the component revision level if i work with bom explosion date in read PP master data. But this solution isn't flexible. Imagine that i want to read PP master data with different explosion date for different component ...
    Why in the purchase order the system allow a manual change of revision level and this chance doesn't exist in production order ?
    Thanks in advance.

  • Manual change of revision level

    Dear.
    Can I manual change the revision level for a specific component of the production order ?
    I donu2019t want an automatic adjustment of the revision level for all the po components using the header read pp master data.
    Thanks

    Dear Cris,
    It is not possible to change the revision level for a specific component of the production order manually.
    Check and revert
    Regards
    S Mangalraj

  • What are the Uses of Revision Level

    Dear All,
    I have been searching for articles pertaining to "Revision Level" in the Material Master Record and found out that revision level is used purposely in Engineering Change Management and Document Management System. Is this true?
    I want to know if activating revision level can purposely be used also in tracking MRP Tab Changes in material master record. There are some cases that user change MRP Type and reorder levels (minimum/maximum) in the material master record and i want to record this changes and who made this changes. Can this revision level help me on this purpose?
    Can anybody please enlighten me on this revision level usage?
    Thank you.
    Regards,
    Bernardo Soledad

    Please check these answered links:
    Revision Level
    Revision Level
    Edited by: Afshad Irani on Apr 20, 2010 7:04 PM

  • Open PR Material Master Revision Level

    Hi,
    I am working on upgrade from 4.5b to ecc6.0.In this Project Material Revision Level and Change Number is assigned with Z Program.
    The Requirement is the Program has to check the Open PR 's and that particular Material  needs to be updated with Change Number and Revision Level.
    Now the Functional Specification to be prepared for the Technical Team -Based on the Open PR condition  -Now what are the fields to be specified in EBAN table in order to fullfill the open PR.
    As per my understanding Open PR means PO is not created and PO is created means that PR is closed.
    Or any other fields are to taken into consideration for preparing Functional Specification
    Please reply me ..
    Thanks for the reply.

    It is very much possible. You can try this use case. It's pretty simple. But Vice-versa is not possible.
    ~ Guru

  • Cannot find the Revision Level field in the item details

    Hi All,
    1) I have created a PR with 2 items in the R/3 Backend using the me51n transaction in which for one of the items i have updated the Revision Level field.
    2) To transfer the purchase requisitions created in the above step to the SRM system(sourcing cockpit) i executed  the report BBP_EXTREQ_TRANSFER with transaction SE38.
    3) Now when i go to the SRM portal and navigate to find the external requirement in the sourcing cockpit, I am not able to find the Revision Level field entered in the backend.
    Can some one help.
    Regards
    Sam

    Hi
    Please go through this ->
    Version Management in R/3
    http://help.sap.com/saphelp_47x200/helpdata/en/8a/60b43bb7492147e10000000a114084/frameset.htm
    Versioning in SRM
    http://help.sap.com/saphelp_srm50/helpdata/en/42/c92d6e3ed16babe10000000a1553f6/frameset.htm
    Prerequisites for Version Control in SRM
    I)        You have activated the version control so that the system creates historical versions.
    See the path in the IMG: SRM Server  ®  Cross-Application Basic Settings  ®  Switch On Version Control for Purchasing Documents
    II) You have set up and activated the workflow for the approval of changes to active purchasing documents. See also: Approval Workflows for Documents and Objects
    ( Related link -> http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5efc85d011d2b42d006094b92d37/frameset.htm )
    Some related SAP OSS Notes ->
    Note 1030548 - Revision level in SRM 6.0 connected to ERP 2005
    Note 1026021 - EXTREQ interface: Data transfer structures
    Note 122105 - ME51, RM06BBI0: Revision level is not filled
    Hope this will definitely help.
    Regards
    - Atul

  • Problem with Revision level for a Material

    Hi All,
    I have a problem with Revision Levels for a Material.
    I want to know the Revision Level for a particular Material for BOM Creation.
    Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
    <REMOVED BY MODERATOR>
    Thanks and Regards,
    Harish Kalla
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

    HI,
    You can use table AEOI.
    Hope this helps.
    <REMOVED BY MODERATOR>
    Regards,
    Sipra
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

  • BOM explosion in subcontracting order according to revision level

    Hello experts
    I have different revision levels available for a subcontracted material, e.g. the BOM of this material has different versions depending on the validity date.
    When a BOM explosion is carried out in the subcontracting order (either in the purchase request or in the purchase order) the selected version of the BOM is done accordingly to the delivery date. It does NOT take into account the revision level even when I change it manually.
    Do you have any idea if it is possible to force SAP to consider the revision level instead of the delivery date for the BOM explosion ? (custo, user exit, BAdI, ...)
    Many thanks
    Amaury

    Hi
    BOM explosion in Subcon PO will be carried out automatically when you select the item category L.
    If you want to control the BOM selection based on the Alternative then you can go with Production version option and get the help from PP consultant to create the production version.
    Assign the production version in Subcontracting Inforecord.
    Click the BOM explosion button the switch to alternative BOM during the PO creation.
    Hope it helps
    Thanks/Karthik

  • Revision level not appearing in material tab of purchase order

    hi
    I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
    regards
    Badari

    Hi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
    In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
    Refer below link also for more information,
    [Revision level in purchase order|Revision level in purchase order]

  • Inspection Plan/Revision level

    Hi PP Gurus,
    I have a Problem in Inspection Lot.The system is not reading the new Inspection Plan.
    The material is assigned to a Revision level with valid from date 10.12.2007 and the earlier Inspection Plan(Group 21) was also created on 10.12.2007.Now this inspection Plan( Group 21) is deleted and New Inspection Plan(Group 100) is created with the Valid from date 10.04.2008.
    I have created an Inspection Lot dated 12.04.2008, Now the system is not reading the new Inspection Plan(Group 100).And the system is giving error "No Insection Plan found" while recording result on the inspection lot.
    We cant change the material ECO revision date as this would contravene our traceability record and  since, the Revision Level is maintained at Global level so cant afford this to change for other Plants.
    Kindly help me to assign the new Inspection Plan to the Inspection Lot.
    Thx in Advance
    Regards,
    Rakesh wade

    Hi,
    I do not know the impact of rev&#305;s&#305;on level on &#304;nspaction lot.
    But, with reference to the Rev&#305;s&#305;on Level only the Conf&#305;rmation w&#305;ll work both in Descrete and aswell as in REM.
    Say &#305;f yor Reves&#305;on Level &#305;s AB, and the date &#305;s 01.03.2008, then during confirmat&#305;on the sytem will explode the BOM with referenec to this Date.
    It may be poss&#305;ble that there may not be any BOM available on that date then there w&#305;ll not be any Components suggested for GI or backflush.
    Probably you can corelate the same th&#305;ng to your &#305;nspect&#305;on lot... ( inspect&#305;on lot not available etc..)
    Hope th&#305;s helps..
    Regards,
    Siva

  • BOM Revision Level

    Hi,
    We are uploading the BOMs into server. While manual creation of BOM I am able to update the revision level of the BOM. But we are unable to update it while uploading through LSMW. Please suggest me in this regard.
    Thanks
    Ramakanth

    We have ECM in our project. 
    We have to take all the BOMs from the previous version of SAP and upload to the new all of them to the new version.
    All the BOMs have revision levels w.r.t. to a change number.
    While manually changing the BOM the revision level can be updated by entering the BOM w.r.t. a change number and then in the menu --> extras --> new revision level.
    Now we have to upload the BOMs through LSMW. It is not picking up the revision level while uploading.
    Please give your suggestions.

  • Revision level in CS61

    Hi PP Gurus,
                     I have brought revision level in t-code CS01, CS02 initial screen by setting IMG. but same does not getting incoporated in order BOm t-code CS61, CS62. What shall have to do with IMG setting.
    Can I add or change column inside BOM in t-code CS61, CS62. (I want to bring revision level column beside change number column).
    Could you please guide me to come out of this problem.
    Regards,
    Maddy

    If u have created proper change no in cc01with assigned object material with proper validity period-> u can give revision level to material...
    Once rev. level is there in material...
    Creat PO..-> check in item detailsmaterial data tab  for revision field..

  • Multiple Revision Levels for a Material

    Today, Tyco Electronics has many manufacturing sites located around the world.  A given material may be manufactured in multiple locations.  When Engineering determines that a given material must change revision level, they determine a date that this new revision level becomes effective.  Unfortunately, not all manufacturing sites can be ready to manufacture to that new revision level.  In fact, based on tooling, one manufacturing site may manufacture to both the old and new revision level for a period of time until all of their tools/dies have been switched over.  In addition, customers may require that only the latest revision be sold to them.  Does anyone else have this requirement/issue today?  If so, how are you handling this within the SAP R/3 system since material revision is at a global level and there is no component revision level field on the bill of material.  Requirements are to sell at a material/revision level, plan to a particular material/revision level, stock at a material/revision level.  Any input you have would be greatly appreciated.

    Which strategy shall I use for picking?
    Can you please guide me what material master data fields are required for these strategies.
    regards,
    VS
    Edited by: vs on Jan 12, 2008 7:01 PM

Maybe you are looking for

  • ERROR: Invoking BPEL PROCESS FROM ADF APP

    hi guys , I have made a simple bpel process with invokes a webservice (This service only gets a string and returns the string). I have tested this bpel process and web service it works fine. when tested with bpel console. I copied the wsdl of bpel an

  • Create a Revenue Order with Reference to a Sales Order

    Hi Gurus,   I have specific requirement of creating a Revenue Order ( ZCAR ) with Reference to a Sales Order. The Issue is when I create a Revenue Order from Sales Order by using the BAPI to Copy the data from Original Sales Order it will create copy

  • Opera Mini Video Quality

    Hi All, I use a BB 9360 Curve 3G and at times I use Opera Mini which is an amazing browser however when I watch youtube videos on it the quality of the video is pathetic as compared to the video quality when I stream videos on the BIS browser?? Pleas

  • GR reversal acccounting document not created

    Hi, PP Gurus.. We have one material which is having co-product as SFG.For some reason we have reverse the GR  for process order n for coproduct also.In material document list we are not bale to view the accounting doucment and also cost incurred on t

  • Scalability in Tomcat 4.0????

    How many concurrent users does Tomcat 4.0 standalone support. Is it necessary to use Tomcat with Apache or IIS or any other web server. If yes, Why?????