Revoking trusted host

When experimenting with different Exchange and HTTP server settings (for calendar subscription) I had to accept a certificate I don't want to trust forever.
Although I deleted the account under Mail, Contacts & Calendar settings, the iPhone still seems to trust the certificate: When I re-enter the account information, I am not asked if I want to trust, the connection is simply established.
Which options do I have to delete that host from the list of trusted hosts? Will resetting the network settings suffice? Or resetting all settings? Or do I have to backup / restore the iPhone completely?
Thanks for input on this!

I've also ended up with this problem - there is a firewall in one location where I use connect my iPhonew over wifi which, before I had done the http based login, must have responded to the exchange connections SSL request instead of the gmail exchange server.
I don't really want to trust this server, and I've been searching for a way to revoke trusted hosts with no luck so far.
As a side note, this has caused my iPhone to think the firewall is a valid gmail exchange server, and after re-requesting the password a few times times will give up until the phone is restarted if I leave the wifi on and have to reject the prompt (in order to http login).
Would be great to hear if anybody knows how to achieve the revocation.
Thanks, Alex J Burke.

Similar Messages

Trusted Host Check Failed for RFC SAPLSOVLROOM

Hi,
We are using SAP Enterprise Learning 7.5.
In RFC SAPLSOVLROOM, got a below error in response body.
Trusted host check : failed
The host that you are calling from is not configured as trusted. See
the configuration guide for information about how configure a host as
trusted.
Added hostname in the trusted hosts of the sap_servlet_config.xml.
Also followed Note 1471989 - SAP Enterprise Learning 7.5 - Trusted host check:failed
Still the trusted host check alone getting failed. Other Checks for the RFC is sucessful.
Regards,
Raja. G

Raja, did you figure out what was going on here? We have similar situation. Hosta are listed in trusted hosts section, but we get error when doing connection check in sm59 if we use a https connection, but not if we use http connection. There are no ssl errors anywhere, but it fails the same as yours.
If you have any update. Please reply.

Trusted hosts

In trusted hosts,when i am doing rlogin to another host gives error "connection time out" what could be problem.Give solution

Users attempting to use rlogin must be validated. Validation can be performed by the remote computer (the one you are logging into) or by the network environment. If the remote computer is to validate you, one of three conditions must exist.
1     First, the user account you are using must be located on the remote machine, and you must provide a correct password when prompted.
2     Second, the remote machine must have an /etc/hosts.equiv file set up.
3     Third, the remote machine must have an .rhosts file configured.

Ips 4510 error adding trusted host.

Hello.
I'm trying to get event logs from my ips 4510 into splunk.
When I add the host on which splunk is running as a "trusted host" I get the error:
Cannot add #.#.#.# as a trusted host. errTransport-socket connect failed [4,111]
There are no firewalls enabled on the splunk host.
On the splunk side, I've installed Cisco Security Suite and Cisco IPS applications.
The splunk logs show it's able to connect to the host, but then throws the following error:
URLError: <urlopen error Tunnel connection failed: 503 Service Unavailable>.
Not sure at this point if I need to configure something else before being able to add the splunk host as a trusted host?
Any info appreciated.
Thanks.

Hi Jamoser,
Could you try to ping the IPS from client? If it works, can you check there is no device in traffic path blocking TCP 443 to IPS? Can you do a capture on IPS to see if request on TCP 443 is indeed reaching the IPS?
Sourav

My Site Trusted Host Location (still 2010)

Can My Site site collection still be the 2010 flavor using SharePoint 2013 My Site Host.
A group of My Sites does not want to be upgraded, and remain SharePoint 2010. Is it supported to setup a Trusted Host Location which points to the SharePoint 2010 Farm?
Is it supported for a SharePoint 2013 User Profile Service Application to use a SharePoint 2010 My Host Site Template? I would think many things would break?
So the comprise would be to keep some My Site Site Collections in a SharePoint 2010 Farm as a Trusted Location.
Any thoughts...
Thanks in advance.

A SharePoint 2010 Farm can consume services from a SharePoint 2013 farm, but not the other way around. Normally any service farm is upgraded first. So no, to the best of my knowledge you can not use a SharePoint 2010 My Site Host as a Trusted
Host location in the 2013 farm.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Trusted host on SPA2102

Product Name: SPA-2102
Software Version: 5.2.5
Can I write trusted host (remote admin server) on SPA2102?

If you are just talking stand alone with the SPA2102, I think the only option is really via remote management. Unfortunately, this is not a trusted connection as what you wanted to be. As long as the other party knows the WAN IP address being received by the SPA-2102 and the port being used, the PC can access the unit unless you set up both the user and admin view for a password.
I suggest contacting Cisco Tech support to further look into your concern. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support:
http://www.cisco.com/web/products/linksys/index.html

IDSMC 2.0 TLS trusted host

I just upgraded to IDSMC 2.0 today. When I try to do signatures updates to a 4.1 sensor, the job fails with this error below. I already added the VMS server as a trusted TLS host on the sensor. Rebooted.
Any ideas? Do I need to add the sensors cert to the VMS server somehow?
Status Messages
Sensor bbimainsae01: Signature Update Process
TLS Trusted Host Certificate difference found, updating sensor certificate for the MC.
The trusted certificates on the sensor 172.16.1.153 have been updated.
An error occurred while running the update script on the sensor named bbimainsae01. Detail = An error occurred at the sensor during the update, sensor message = The host is not trusted. Add the host to the system's trusted TLS certificates.

We've seen a few of these cases, but have not been able to gather enough information to understand where the breakage is occurring.
The first thing to do is to log into the IDS unit as an administrative user (i.e., "cisco"). Make sure the time on the sensor is accurate. Then take a look at the list of trusted certificates. Next, remove the certificate for the VMS server and re-trust it manually. Finally, attempt the upgrade command manually from the IDS CLI.
Here are the commands to enter into the IDS CLI to perform these actions. The example uses "10.1.2.3" for the IP address of the VMS host, and "IDS-sig-4.1-4-S128.rpm.pkg" as the name of the package you want to apply to the sensor:
sensor# show clock
*03:27:22 UTC Wed Dec 01 2004
sensor# configure terminal
sensor(config)# service trustedCertificates
sensor(config-TrustedCertificates)# show settings
trustedCertificates (min: 0, max: 500, current: 0)
sensor(config-TrustedCertificates)# exit
sensor(config)# tls trusted-host ip-address 10.1.2.3 port 443
Certificate MD5 fingerprint is 0A:CB:6F:B5:F8:F8:85:05:5B:5D:7D:0B:73:E1:14:A6
Certificate SHA1 fingerprint is CF:9D:85:60:CA:31:99:26:64:26:39:23:AE:66:E8:3C:BC:68:12:02
Would you like to add this to the trusted certificate table for this host?[yes]:
Certificate ID: 10.1.2.3 succesfully added to the TLS trusted host table.
sensor(config)# upgrade https://10.1.2.3/ids-config/vms/sensorupdate/IDS-sig-4.1-4-S128.rpm.pkg
Warning: Executing this command will apply a signature update to the application partition.
Continue with upgrade? : yes
If the tls trusted-host command does not succeed, we will need to obtain a packet capture to diagnose why. I've provided instructions for doing this elsewhere in this forum. (Search for recent articles by me.)
If you can get the tls trusted-host command to succeed, but the upgrade command fails, then we need to see what might be wrong with the certificate on the VMS server.
If both commands succeed manually, you can re-import the sensor in VMS so it will detect it is running the new version. We will then need to wait until the next signature update to see what happens when you use VMS to upgrade the sensor.

TLS trusted-host

Certificate on IDSM Console expired. Created new certificate, then deleted and add IDS Sensor using discovery. Login to IDS sensor verified clock on matched IDSM Console, then removed trusted-host and re-add to generate new certificate. Cert on sensor doesn't match IDSM Console cert. Still getting TLS trusted host errors when trying to do signature updates. Am I missing a step? Any suggestions? Thanks,

If it is the IDSM-2 certificate that expired, then the steps are correct.
My assumption, however, is that the error you are receiving is not because the IDSM-2 certificate has expired, but instead it is the VMS certificate that has expired.
You would need to create a new certificate for the VMS itself. Then go to the sensor and remove the sensor's knowledge of the VMS old certificate and tell it to grab the new VMS certificate.
Here is how you tell the sensor to grab VMS's new certificate:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/clitasks.htm#wp1036631
I am not sure what the steps are to create a new certificate on the VMS itself.

Setting up a trusted host for email

Our email is being filtered by MailWise before hitting our GroupWise
system. However, the unscrupulous out there are bypassing the filtering
by using the IP address. I need to configure my BorderManager firewall to
set up the MailWise IP network range as a "trusted host." How do I do
that? (Am I asking the question correctly?) I can't find anything in the
Novell Support knowledgebase or in any of my Novell Press BorderManager
handbooks, guides and course manual!

well, you're reading the wrong manuals. Craig Johnson's books are the
de facto standards in Border docs. :-)
This is the wrong group for your question, however. Go ask in the
bordermanager.access-rules group for an answer from soneone who knows
what they're talking about. :-)
Cheers!
Richard Beels
http://www.dsi-consulting.com
Collaboration without complication

Number of Trusted Hosts Limit on Cisco IDM

Hello,
I got a common feature question.
Do you know what is the number of trusted hosts I can include under Cisco IDM monitoring? Is there any limit?
My versions of IPS are:
7.1(4)E4 @ Cisco 4345 and 4360
7.0(8)E4 @ Cisco 4240
Thank you.
Kamil

From CCO, found two different conflicting information though for same release 3.7.2. confusing..
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/qos/command/reference/b_qos_cr42asr9k_chapter_011.html#wp966352593
"The maximum number of policy maps supported is 2000."
http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.0/qos/command/reference/qr40asr9k_chapter1.html#wp915159151
"The maximum number of policy maps supported is 1000."
Thanks for your reply!

Customization Wizard 9 and Reader 9.2: not saving trusted hosts

I', using "Adobe Customization Wizard 9" and "Adobe Reader 9.2". As part of the Enhanced Security Settings , I want to define two trusted hosts. ie: http://www.whatever.com . The problem is that the Wizard is not saving the trusted hosts that I enter. I generate the MST file and perform a test installation with the .msi calling the .mst file. All the other customizations I have made using the Customization Wizard 9 tool are there EXCEPT the settings I designated for the trusted hosts. The entries are blank.
Is this a known bug with the Customization Wizard 9 or am I doing something wrong?
TIA !

I came across your post because I am looking for an answer to the same corruption. Installation completes, but installed configuration does not match my settings. I have similar but separate packages hosted on 2 different servers from which I pushed installation to 2 different LANs. All evidence so far is that all installations are corrupt, all of which defeats the purpose of using the Adobe Customization Wizard.
I suspect I will have to revisit all systems.
I have no answers to offer, but will monitor this site in case you do get good advice to fix.

Adobe reader - trusted host

I'm trying to automatically print a pdf from a website using javascript embedded in the pdf. This works fine but I get a message saying "This document is trying to print. Do you want to allow this?" from adobe reader. To get rid of the message, I'm trying to add a host to preferences > Security (Enhanced) > Add Host. I've tried many combinations of my host name with and without wildcards. But I still get the message. My pdf is just written to the browser using Response.BinaryWrite. I'm not sure what's wrong at this point? Can anyone help? Thank you.

http://www.adobe.com/devnet-docs/acrobatetk/tools/AppSec/trust.html
https://blogs.adobe.com/pdfitmatters/2008/06/enhanced_security_privileged_l.html
It actually specifically mentions silent printing in the host section...
Host — A privileged PDF site is appropriate for PDFs that can be opened in a browser from a Web server. A privileged PDF host can only be specified at the host name level; for example, www.adobe.com can be specified, but not www.adobe.com/products/. The specified host must be complete with no wild cards (unlike for crossdomain.xml files). The user will have the option to only specify that the host connection must be secure, for example, that it must be an https: connection. All
PDFs on the specified host will all have the same privileged PDF settings.
Using privileged locations, the user can bypass the security restrictions on the following, which would otherwise be in effect:
•Cross-domain data access
•Silent printing
•External streams access
•Document JavaScript sending data to a remote server
•FDF data injection
•FDF script injection
•Data taint: when data is downloaded from multiple hosts and then sent to another host

How to revoke "Trust this Computer"?

Apple gives instructions on how to trust a computer on your iPhone here:
http://support.apple.com/kb/HT5868
But how can I revoke that trust if I no longer want my iPhone to share data with a particular computer?

No.
Take your iPhone into an Apple Store or Authorized Apple Service Center for advice how to proceed.

Authentication Trusted for a new Host

Whats the use of creating a Trusted Host vs non trusted (which is the default behavior)
Thanks
SV

Hello,
The default Behavior is trusted.
the main point to consider is that if you are going to talk to external systems and trading partners via Web Services, AS2 etc...from your BizTalk, the hosts have to be trusted.
Secondly, once you do decide to create Trusted Hosts, you should keep the same configuration in all environments even if you are not communication externally. This will ensure smoother code migration from one environment to the other via bindings and msi installs.
Thanks
Abhishek

Alert beeps and lots of "trust"

I have already noticed that many users complain here about alert beeps that can't be stopped. That's my complaint, also, but I don't have any of the 10 or 12 reasons that others have found that could cause the beeps. I can't see any pattern for the beeps. They happen with no Safari launched, no iOS device connected and when I am signed out of iCloud. I do not ever use any of the following:
Nimbuzz
FaceTime or other messenger app
Messages
Email notification
Notifications for Safari
Twitter
FaceBook
To avert the occasional reader who loves to reply here with "So what's your question", my question is how to kill the alert beeps other than never use sound.
After the last incidence of an alert sound, I checked Console and noticed 123 entries that contain the word "trust" in less than 30 minutes. Is that about iPhone or just a coincidence (I do also have the perpetual "Trust" nag from connecting iPhone, even when I choose "Trust", but that just puts me in the huge crowd of iPhone users with that annoyance. Here is the System Log for a 28 minute period that had at least one alert sound around 3:50 p.m. (I'm not in your time zone)….
8/30/14 3:25:21.000 PM kernel[0]: process 58813 set trusted
8/30/14 3:25:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58813)
8/30/14 3:25:21.000 PM kernel[0]: process 58814 set trusted
8/30/14 3:25:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58814)
8/30/14 3:26:21.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58814)
8/30/14 3:26:21.000 PM kernel[0]: revoking trust for process 58814
8/30/14 3:26:26.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58813)
8/30/14 3:26:26.000 PM kernel[0]: revoking trust for process 58813
8/30/14 3:27:08.000 PM kernel[0]: process 58835 set trusted
8/30/14 3:27:08.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58835)
8/30/14 3:28:47.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on
(pid 58835)
8/30/14 3:28:47.000 PM kernel[0]: revoking trust for process 58835
8/30/14 3:28:54.000 PM kernel[0]: process 58858 set trusted
8/30/14 3:28:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58858)
8/30/14 3:30:06.000 PM kernel[0]: process 58879 set trusted
8/30/14 3:30:06.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58879)
8/30/14 3:30:49.992 PM avguard.bin[52015]: "/Users/jm/Library/Safari/Extensions/YouTube Downloader.safariextz" was not completely scanned (maximum recursion exceeded)
8/30/14 3:30:50.000 PM kernel[0]: process 58904 set trusted
8/30/14 3:30:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on syncdefaultsd (pid 58904)
8/30/14 3:30:50.903 PM com.apple.qtkitserver[58905]: Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacOS/LiveType, 262): Library not loaded: /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
Referenced from: /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
Reason: image not found
8/30/14 3:30:50.000 PM kernel[0]: process 58905 set trusted
8/30/14 3:30:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on com.apple.qtkits (pid 58905)
8/30/14 3:30:54.000 PM kernel[0]: process 58907 set trusted
8/30/14 3:30:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ocspd (pid 58907)
8/30/14 3:31:03.000 PM kernel[0]: process 58910 set trusted
8/30/14 3:31:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 58910)
8/30/14 3:31:05.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �5]"�� T ��7 (pid 58910)
8/30/14 3:31:05.000 PM kernel[0]: revoking trust for process 58910
8/30/14 3:31:52.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 58879)
8/30/14 3:31:52.000 PM kernel[0]: revoking trust for process 58879
8/30/14 3:32:53.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 58904)
8/30/14 3:32:53.000 PM kernel[0]: revoking trust for process 58904
8/30/14 3:37:32.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ��\"�� T ��c�@ (pid 58858)
8/30/14 3:37:32.000 PM kernel[0]: revoking trust for process 58858
8/30/14 3:37:36.000 PM kernel[0]: process 58990 set trusted
8/30/14 3:37:36.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 58990)
8/30/14 3:38:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ��c �� T ��O�= (pid 58990)
8/30/14 3:38:46.000 PM kernel[0]: revoking trust for process 58990
8/30/14 3:39:54.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on
(pid 58907)
8/30/14 3:39:54.000 PM kernel[0]: revoking trust for process 58907
8/30/14 3:41:03.000 PM kernel[0]: process 59033 set trusted
8/30/14 3:41:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 59033)
8/30/14 3:41:04.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �[--�� (pid 59033)
8/30/14 3:41:04.000 PM kernel[0]: revoking trust for process 59033
8/30/14 3:41:05.000 PM kernel[0]: process 59034 set trusted
8/30/14 3:41:05.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59034)
8/30/14 3:44:17.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59034)
8/30/14 3:44:17.000 PM kernel[0]: revoking trust for process 59034
8/30/14 3:44:48.000 PM kernel[0]: process 59079 set trusted
8/30/14 3:44:48.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59079)
8/30/14 3:45:00.445 PM coreaudiod[162]: Disabled automatic stack shots because audio IO is active
8/30/14 3:45:01.816 PM coreaudiod[162]: Enabled automatic stack shots because audio IO is inactive
8/30/14 3:45:46.000 PM kernel[0]: process 59093 set trusted
8/30/14 3:45:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on ocspd (pid 59093)
8/30/14 3:45:48.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59079)
8/30/14 3:45:48.000 PM kernel[0]: revoking trust for process 59079
8/30/14 3:45:50.000 PM kernel[0]: process 59096 set trusted
8/30/14 3:45:50.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59096)
8/30/14 3:48:14.661 PM com.apple.qtkitserver[59126]: Error loading /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType: dlopen(/Library/QuickTime/LiveType.component/Contents/MacOS/LiveType, 262): Library not loaded: /System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
Referenced from: /Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
Reason: image not found
8/30/14 3:48:14.000 PM kernel[0]: process 59126 set trusted
8/30/14 3:48:14.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on com.apple.qtkits (pid 59126)
8/30/14 3:49:28.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59096)
8/30/14 3:49:28.000 PM kernel[0]: revoking trust for process 59096
8/30/14 3:50:00.448 PM coreaudiod[162]: Disabled automatic stack shots because audio IO is active
8/30/14 3:50:01.000 PM kernel[0]: process 59151 set trusted
8/30/14 3:50:01.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59151)
8/30/14 3:50:01.818 PM coreaudiod[162]: Enabled automatic stack shots because audio IO is inactive
8/30/14 3:50:59.987 PM uxipm_loader[59165]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Users/_avipm is unavailable. User domains will be volatile.
8/30/14 3:50:59.000 PM kernel[0]: process 59165 set trusted
8/30/14 3:50:59.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_loader (pid 59165)
8/30/14 3:51:00.028 PM lsregister[59166]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Users/_avipm is unavailable. User domains will be volatile.
8/30/14 3:51:00.000 PM kernel[0]: process 59167 set trusted
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <59167>):Change trust on avbackendproxy (pid 59167)
8/30/14 3:51:00.000 PM kernel[0]: process 59168 set trusted
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on launchd (pid 59168)
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on �?
8/30/14 3:51:00.000 PM kernel[0]: �� (pid 59165)
8/30/14 3:51:00.000 PM kernel[0]: revoking trust for process 59165
8/30/14 3:51:00.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <59167>):Change trust on дV݁�� (pid 59167)
8/30/14 3:51:00.000 PM kernel[0]: revoking trust for process 59167
8/30/14 3:51:03.000 PM kernel[0]: process 59171 set trusted
8/30/14 3:51:03.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on uxipm_ui (pid 59171)
8/30/14 3:51:04.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on (pid 59171)
8/30/14 3:51:04.000 PM kernel[0]: revoking trust for process 59171
8/30/14 3:51:10.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59168)
8/30/14 3:51:10.000 PM kernel[0]: revoking trust for process 59168
8/30/14 3:53:45.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59093)
8/30/14 3:53:45.000 PM kernel[0]: revoking trust for process 59093
8/30/14 3:53:46.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on   (pid 59151)
8/30/14 3:53:46.000 PM kernel[0]: revoking trust for process 59151
8/30/14 3:53:58.000 PM kernel[0]: process 59211 set trusted
8/30/14 3:53:58.000 PM kernel[0]: debug_info_on_trust 27 (ERROR <247>):Change trust on mdworker (pid 59211)
Please no reply from "Meg St._Clair" who will probably tell me to read the manual for Mac mini and OS 10.8.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

Revoking trusted host

Similar Messages

Maybe you are looking for