Revolve 810 and behavior of the arrow keys with Ctrl + Alt

The behavior the left and right arrow key, in combination with Ctrl and Alt, is to modify the screen orientation. (Which can be help because the Revolve is easily confused.) However, I want to disable this behavior because I use those key combinations for other uses.
How can I disable this behavior?

I understand you want to disable the rotate shortcut keys.  
It looks like it is using Intel, so I will provide the steps my Windows 7 system uses to disable these functions.  They should be similar to Windows 8 as well.  
Right-click the desktop and select screen resolution.
Select advanced settings.
Select Intel Graphics Media Accelerator Driver for Mobile (wording may be different).  
Click the Graphics Properties button.
Select Options and Support of the graphics control panel.
Disable Hot Key functionality and click apply then ok.  
This should disable the hotkeys to rotate the screen.  
Since the Revolve 810 is using an Intel graphics card similar to mine, the steps should be the same or similar.
Let me know what happens.  
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Is There a List of Keyboard Shortcuts for Adobe Digital Editions, I Found Two By Accident the "Arrow" Keys and the "Enter Key" for Turning Pages in an eBook...

    Hi  ??  :       Does Anyone Know If There is a List of Keyboard Shortcuts for Adobe Digital Editions, I Found/Discovered Two By Accident the “Arrow” Keys and the “Enter Key” for Turning Pages in an eBook...   Thanks
    I Did Look for this Keyboard Shortcuts in Adobe Digital Editions Help & FAQ Areas and Got the Run Around, Very Hard to Find How Use Adobe Products !!
    Microsoft Windows Vista & Win 7 Operating Systems
    Message was edited by: Al Adams

    Nope, I doubt it.  As I said:
    I disabled Aero theme, checked font scaling was 100% and rebooted Windows in between all of the steps to no avail.
    I've been reading a lot around this and it seems the arrow key problem is a red herring; I think it's just some kind of terminal preferences corruption.

  • When I close firefox with ctrl-alt-delete, I want to start over on Firefox, I usually do this when too many tabs and windows are open. However, Firefox always restores the tabs and windows I previously had. How can I stop that from happening?

    This happens when FireFox is not responding, and I want to close firefox with ctrl-alt-delete. Too many tabs can make Firefox crash. That is why I want to use ctrl-alt-delete to close FireFox. I tried finding a way to disable this, but I found no option to.

    Ending the Firefox program or process with the Windows Task Manager "looks like" a crash. The proper way to exit Firefox is click Firefox button > Exit (or File > Exit, if using the Menu Bar).
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

    Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

    Sounds that you have switched on caret browsing.
    * http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • When adding bookmarks and trying to changing its name, Firefox won't allow using the mouse; Firefox will only allow using the arrow keys (MAC OS 10.5, Firefox 3.6.8)

    When adding a bookmark sometimes the web page name is too long. I used to be able to use my mouse, highlight the letters/words that I don't want, then use delete to truncate the desired bookmark name. Since the latest update/upgrade, Firefox won't let me use the mouse to click anywhere in the popup box. I can only use the arrow keys and the delete key.
    Nothing other than updates (using Mac Software Update and Firefox Update) has been done to this computer (it's a 2002 Power Mac G4-Dual 1.25GHz).

    When adding a bookmark sometimes the web page name is too long. I used to be able to use my mouse, highlight the letters/words that I don't want, then use delete to truncate the desired bookmark name. Since the latest update/upgrade, Firefox won't let me use the mouse to click anywhere in the popup box. I can only use the arrow keys and the delete key.
    Nothing other than updates (using Mac Software Update and Firefox Update) has been done to this computer (it's a 2002 Power Mac G4-Dual 1.25GHz).

  • When i try and open a tab that is the same as the page im currently on i closes it self. not when i type the full address, but when i use the arrow keys to select the url and press enter

    when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.

    Hi
    AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
    CCT

  • No major shortcomings keyboard arrow key. even if the text part of the message you clicked the arrow keys to update the screen would be great. with an update on my idea, and so it would be more useful

    no major shortcomings keyboard arrow key. even if the text part of the message you clicked the arrow keys to update the screen would be great. with an update on my idea, and so it would be more useful

    greghcrash wrote:
    It Would be great to have keys on the onscreen keyboard.
    Such as a computer keyboard.
    With BACKSPACE, TAB WITH SETTINGS, DELETE, TYPE OF TYPE, BOLD TYPE, UNDERLINE ETC....
    I HAVE A KEYBOARD COVER AND IF I NEED TO USE CERTAIN KEYS I HAVE TO SWITCH TO MY KEYBOARD CASE AND THAT IS VERY INCONVENIENT.
    IT IS ALSO A TIME WASTER.
    When you installed iOS 8 did you read about the new features? Applications can create custom keyboards…
    http://www.imore.com/custom-keyboards-ios-8-explained
    You need to look for an app that has a custom keyboard with the features you require, I suggest you find one without CAPSLOCK
    greghcrash wrote:
    IT IS ALSO AGGRAVATING WHEN TYPING AND IT AUTOMATICALLY CHANGES THE WORDS THAT YOU WANT TO USE.
    THANK YOU FOR YOUR TIME
    Again you need to look at how to manage the device - these settings can be turned off already & you can edit the 'suggestions' too.
    Settings > General > Keyboards > turn Auto-Correction Off.
    Sadly you cannot disable autocorrect temporarily, so it's all or nothing.

  • When I use the arrow keys in firefox to go forward and back, the cursor erases tiny bits of the letters.

    Even within this text field as I type, all is normal, but backspacing using the arrow keys (and then also forward spacing using the arrow keys as I return to typing) erases bits of the text. Once I begin typing again in this field, the erased components restore to normal. This effect can be captured in a screenshot. Upon closer inspection, there appears to be a second invisible cursor, one full character to the right of the visible cursor. So when arrow backspacing, the invisible cursor trails the visible one, wrecking the text behind. When forward spacing using the arrow keys the text gets wrecked in front of the visible cursor.

    I am guilty of not following up. The above solution "appeared" to work for me until I realized that now, the text does not erase bits on the same line as my cursor but erases any text on the line below my cursor... so if I am typing above other text, these semi-invisible marks chop up the text below where I am backspacing. Yes, I know - put this in David Letterman's, "Museum of the hard to believe".

  • Satellite - randomly the arrow keys, question mark key and z key will not work

    Sometime the arrow keys, question mark and z key work fine (like now) and sometimes they just don't work at all (like a minute ago).  I will just be typing and they will work and then just stop working, then work again.  They either all work or all do not work. This has been happening since about a week after I got the computer.  It is so annoying.  Can you please help me fix this problem?  I have a Satellite T135-S1309.
    Many thanks.

    Hi, 
    I've posted recently about keyboard problem, and have tried everything as everybody else, finally and oddly :-) the solution for my problem was to reconnect little flat cable that connects keyboard and MB :-D shown in step 10 on the following link:
    http://www.irisvista.com/tech/laptops/Toshiba-Satellite-X205/take-apart-laptop-2.htm
    ..so maybe your keyboard somehow strangely detached itself from mother-board just a bit and started creating all sorts of strange problems as mine... one cable line was without contact because flat cable was not attached properly anymore and mentioned keys stop working... I have also downloaded keyboard tester software that helped me find all keys and combination of keys that stop working ... so guys, try that and good luck!    

  • How do I get the arrow keys to move one character at a time in the address bar or search box?

    I can no longer get the arrow keys to advance or retard "one character at a time" in the address bar, the search box, or on any form in Firefox. This feature works in other browsers without a problem. The "Home" and "End" keys do not work either. How do I fix this behavior?

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • Key Bindings using the arrow keys

    Following is some code that allows you to move a component around the screen using the arrow keys. I've noticed a problem and I'm just wondering if its Java or my keyboard.
    Lets start with an example that works:
    Press the down and right keys. Then press either the up or left key. The image moves proving that it supports 3 keys.
    Now for the problem:
    Press the up and left keys. Then press either the down or right key. Three things to notice:
    a) the direction doesn't change when the third key is pressed
    b) no output is displayed, so the ActionListener is not being invoked
    c) after a short time, the program starts beeping
    Now try rerunning the code after removing the comments that assign the key bindings to the "a, s, d, f" keys. Redo the above test and it works even if all four keys are pressed.
    I don't remember this problem when I wrote the code a while ago, but I did recently get a cheap new keyboard so I'm just wondering if the problem is my keyboard or whether its a quirk with Java.
    You can download Duke from here:
    http://java.sun.com/docs/books/tutorial/uiswing/examples/components/LayeredPaneDemoProject/src/components/images/dukeWaveRed.gif
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class KeyboardNavigationProblem implements ActionListener
         private JComponent component;
         private int deltaX;
         private int deltaY;
         private Timer timer;
         private int keysPressed;
         private InputMap inputMap;
         public KeyboardNavigationProblem(JComponent component, int delay)
              this.component = component;
              this.deltaX = deltaX;
              this.deltaY = deltaY;
              timer = new Timer(delay, this);
              timer.setInitialDelay( 0 );
              inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
         public void addAction(int keyCode, String description, int deltaX, int deltaY)
              new NavigationAction(keyCode, description, deltaX, deltaY);
         public void updateDeltaX(int delta)
              deltaX += delta;
         public void updateDeltaY(int delta)
              deltaY += delta;
         public void actionPerformed(ActionEvent e)
              int componentWidth = component.getSize().width;
              int componentHeight = component.getSize().height;
              Dimension parentSize = component.getParent().getSize();
              int parentWidth  = parentSize.width;
              int parentHeight = parentSize.height;
              //  Determine next X position
              int nextX = Math.max(component.getLocation().x + deltaX, 0);
              if ( nextX + componentWidth > parentWidth)
                   nextX = parentWidth - componentWidth;
              //  Determine next Y position
              int nextY = Math.max(component.getLocation().y + deltaY, 0);
              if ( nextY + componentHeight > parentHeight)
                   nextY = parentHeight - componentHeight;
              //  Move the component
              component.setLocation(nextX, nextY);
         class NavigationAction extends AbstractAction implements ActionListener
              private int deltaX;
              private int deltaY;
              private KeyStroke pressedKeyStroke;
              private boolean listeningForKeyPressed;
              public NavigationAction(int keyCode, String description, int deltaX, int deltaY)
                   super(description);
                   this.deltaX = deltaX;
                   this.deltaY = deltaY;
                   pressedKeyStroke = KeyStroke.getKeyStroke(keyCode, 0, false);
                   KeyStroke releasedKeyStroke = KeyStroke.getKeyStroke(keyCode, 0, true);
                   inputMap.put(pressedKeyStroke, getValue(Action.NAME));
                   inputMap.put(releasedKeyStroke, getValue(Action.NAME));
                   component.getActionMap().put(getValue(Action.NAME), this);
                   listeningForKeyPressed = true;
              public void actionPerformed(ActionEvent e)
                   if (listeningForKeyPressed)
                        updateDeltaX( deltaX );
                        updateDeltaY( deltaY );
                        inputMap.remove(pressedKeyStroke);
                        listeningForKeyPressed = false;
                           if (keysPressed == 0)
                                timer.start();
                     keysPressed++;
                   else // listening for key released
                        updateDeltaX( -deltaX );
                        updateDeltaY( -deltaY );
                        inputMap.put(pressedKeyStroke, getValue(Action.NAME));
                        listeningForKeyPressed = true;
                        keysPressed--;
                           if (keysPressed == 0)
                                timer.stop();
                   System.out.println(KeyboardNavigationProblem.this.deltaX + " : "
                   + KeyboardNavigationProblem.this.deltaY);
         public static void main(String[] args)
              JPanel contentPane = new JPanel();
              contentPane.setLayout( null );
              JLabel duke = new JLabel( new ImageIcon("dukewavered.gif") );
              duke.setSize( duke.getPreferredSize() );
              duke.setLocation(100, 100);
              contentPane.add( duke );
              KeyboardNavigationProblem navigation = new KeyboardNavigationProblem(duke, 100);
              navigation.addAction(KeyEvent.VK_LEFT, "zLeft", -5, 0);
              navigation.addAction(KeyEvent.VK_RIGHT, "zRight", 5, 0);
              navigation.addAction(KeyEvent.VK_UP, "zUp", 0, -5);
              navigation.addAction(KeyEvent.VK_DOWN, "zDown", 0, 5);
    //          navigation.addAction(KeyEvent.VK_A, "zLeft", -5, 0);
    //          navigation.addAction(KeyEvent.VK_S, "zRight", 5, 0);
    //          navigation.addAction(KeyEvent.VK_D, "zUp", 0, -5);
    //          navigation.addAction(KeyEvent.VK_F, "zDown", 0, 5);
              JFrame frame = new JFrame();
              frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
              frame.setContentPane( contentPane);
              frame.setSize(800, 600);
              frame.setLocationRelativeTo( null );
              frame.setVisible(true);
    }

    if you hold down left and right (so it doesn't move), down works, but not up.
    hold up/down, right works but not left.Yes, the problem only seems to be when the up and left in combination with the right or down key is pressed.
    num lock off - use the number pad arrow keys and all works OK Thats interesting, I didn't notice that. Although it just confuses the issue as to what the problem is.
    So it appears to me that:
    a) left + up + down, and
    b) left + up + right
    are special key combinations that are intercepted by either the OS or the JVM. Do these key combinations ring a bell to anybody?
    I'm use JDK1.4.2 on XP. I wonder if other OS will have the same problem?
    Again, this isn't a real, problem, just more of a curiosity. Thanks,

  • Firefox is placing a cursor in the html window of pages that cannot be edited messing up the scroll option using the arrow keys

    Whenever I click in a window pane to scroll using my arrow keys it is placing a cursor in the window and scrolling off of it, instead of scrolling the entire page by using the arrow key it is scrolling by the cursor location inside of the window like a word document.

    Hit '''F7''' to turn off caret browsing.
    http://kb.mozillazine.org/Accessibility.browsewithcaret

  • I have a Belkin bluetooth keyboard attached to my Ipad 3. I would like to know if there is any way to have the arrow keys scroll down when browsing web pages?

    I just got my Ipad 3rd generation a few days ago and for my case I got the bulky BELKIN Bluetooth keyboard. I notice that when I press down the arrow keys it does not seem to scroll down when searching a web browser or looking up web pages. However it works fine when scrolling down on office apps such as Pages. I'm wondering if is there a way to make the arrow keys on the keyboard scroll down when on an internet web page like my Mac does.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

    I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

    Hi,
    Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
    This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
    Thank you in advance for your answer.

  • In latest Nightly, arrow keys don't move the cursor but instead exit the text box. How can I fix this so that the arrow keys move the cursor?

    Using Nightly 28.0a1, I'm having a problem with the text box fields when typing. I use Hacker's Keyboard which has onscreen arrow keys and I find it more convenient than fiddling with a tiny cursor thumb when editing text. On the Play Store Firefox it works just fine but on Nightly, any time I try to move the cursor with the arrow keys it jumps out of the text box and highlights other elements on the page. This is annoying beyond belief as it means having to resort to that imprecise thumb cursor that takes forever to get where you want it. Is this a known issue with the latest nightly builds?

    Thanks for the report. I have filed bug https://bugzilla.mozilla.org/show_bug.cgi?id=939959. It would be helpful to know and if you can comment into the bug to indicate which input field you are testing on.

Maybe you are looking for