Rewire latency with reason

Hi....
i am trying to play the reason instruments trhu my Logic pro 7 but after i setup everything,rewire chanel and rewire audio output i confirm that reason has and hard latency....its imposible to play....i change the bufer in logic but,nothing hapen...the problem its in reason....someone can helpme?

Turn the "rewire behavior" to "Live mode"

Similar Messages

  • How I ReWire Logic with Reason 3

    Getting Logic Express 7 and Reason 3 ReWired and working well together took me a few days. Thanks to some very helpful posts here (mostly by users "clangwork" and "mlehmann") and a few other sources I have everything working well. Mostly so I can remember, I wrote down the steps. Hope it helps someone!
    ReWire Logic Express 7 with Reason 3
    1. Start Logic
    2. Start Reason
    3. Reason: create a mixer, Subtractor, and NN-XT (any device is fine, these are for example) and select some patches.
    4. Reason: DELETE the tracks for the devices you made in the sequencer, but KEEP the devices when asked. IMPORTANT!
    5. Logic: open Environment window, set it on MIDI Instr. (on left), and click New -> Internal -> Rewire. Do it for as many devices as you have in Reason. In this example I have two (for Subtractor and NN-XT). Click on a Rewire object and set Device (on left) to Reason and Channel to SubTractor. Click on the other and set Device to Reason and Channel to NN-XT. Bus should be 6 for both. Close the Environment window.
    6. Logic: Click on any track icon and hold the button down. In the pop up menu, select MIDI Instr. and then the first ReWire listed. It should show up on the left as SubTractor 1. Click another track and do the same for the other Reason device.
    7. Logic: Select an Audio track and set the Channel to ReWire -> RW:Mix L. Pan the track all the way to the left. Select another Audio track and set it to ReWire -> RW:Mix R and pan to the right.
    8. Logic: I have no idea why, but for any Reason devices to play I need to set up a Logic instrument (any, such as ES1, etc.) and load a patch. Play one note, then select one of the yellow ReWire tracks and you should hear your Reason device!
    9. Logic: Record to the ReWire tracks like any other MIDI instrument!
    NOTES:
    You can add effects to the Reason rack and don't need to change anything in Logic.
    Set levels, pans, etc. in Reason.
    You can delete a device and replace it with something else in Reason and don't need to change anything in Logic. Reselect the channel for the ReWire track to update the name.
    Mac OS X (10.4.3)

    http://thelocalhost.googlepages.com/settingupreasonwithlogic
    http://thelocalhost.googlepages.com/reasontips

  • Garageband2 with reason 2.5 software

    I am ready to upgrade to either an iBook 14" or powerbook 15" - would definitely like the iBook since it is about $600 cheaper.
    anyway, i have been using reason 2.5 to do all my tracks and read somewhere that you can transfer the final mix to garageband2 and then lay the vocals over it.
    has anyone done this and does the final mix with vocals sound great?
    thanks.

    Reason has some processors that are good for running vocals or final mix through. I'd like to record something in garageband, and send it to Reason for some after effects.
    Also, Reason has some great keyboard/synth samplers. What's the easiest way to run my midi keyboard into reason to get a certain voice, then to garageband? You said that GB supports Rewire. Does rewire come with Reason, and is this the easiest way to accomplish what I described above, using Reason and GB?
    Thanks for all your help,
    Jon

  • Logic with Reason rewire lagging during recording...

    Hey everyone,
    I've been working with Logic 8 rewired with reason 4, and have been having issues with logic whilst trying to record MIDI data through my controller. It will pick up uncomplicated, exactly on the beat things fine, but anything more complex that gets absolutely mangled on playback. I don't think it's the computer because I'm working off a brand new iMac in my school's music lab. Is there anything I can do?
    The program really doesn't seem to be lagging "per se" because nothing actually slows down during input; it just seems like it's not catching the notes properly. The stuff I end up with after recording is absolute trash, no semblance of what I was playing whatsoever, and quite unusable. I'll send you a fruitbasket if you can help me.

    This applies to Live users on intel as well.
    http://www.propellerheads.se/
    quote:
    The ReWire 1.7 update brings dramatically improved sample loading times and compatibility with Intel Macs. If you use a PC, this update is for you. If you use a mac, you only need this update if you are not using Reason. For instance, if you use ReWire to hook up Ableton Live and Logic on an Intel Mac you should download this update.
    Note: If you are using Reason 3.0.5, you do not need this update at all.
    Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 RME FF800   Mac OS X (10.4.6)   Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1 DFH 1.5.3

  • Logic rewired with Reason midi controller issue.

    I use Logic 7.2.3 rewired with Reason and for some "reason" I can't get Reason to recognize my controller which is connected via MIDI to the Digi 003. Any ideas?

    Interesting question.. Usually, variation in velocity is a desirable thing, to be able to play an instrument expressively. However, if you want to make your notes all equal velocity, an easy way to do this is with the inspector. Make sure that no regions are selected in the arrange window (so that the inspector says 'midi through'). Then adjust the 'dynamics' setting to 'off' (or whatever the actual terminology is), from that point on, anything you play on any instrument will have the velocity ignored. You can also set this kind of thing up for individual instruments, using the instrument parameter box just below the inspector.

  • Using Logic Pro with Reason 3.0

    I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
    When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
    From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
    I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
    Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
    Thanks in Advance.
    amerretz

    Common problem. LP doesn't rewire 'out of the box'.
    There are two ways to do this (well, more, but I'll tell you 2)
    1 (Easy Way):
    Restart Mac (Just to be sure things are sorted, not everytime)
    Launch Logic
    Launch Reason
    Arrange Window
    Choose a Channel> Pan Left
    Go to the Middle section of the Parameters on the Left
    With the Channel pop up menu, select Rewire> RWMix L
    Repeat for the Right and away you go.
    2 (More Advanced)
    Environment Window
    In the Middle section of the parameters on the Left select Create
    Name it Rewire
    Under that windows "New" pull down (Top Left), pull down to Audio Object
    In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
    Double Click the Audio Object to expand it
    Pan Left or right, or whatever you need.
    Rename if you wish
    Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
    Go to the Mixer window
    Double click the Bus you assigned, this puts it in the arrange window
    Arrange window
    Name the Bus "Rewire" or "ReDrum" or something great like that.
    Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

  • Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store    and now my account stoped with reason owe ..

    Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store    and now my account stoped with reason owe ..

    You can ONLY use the itunes store of your country of residence ( proven by the billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
    You would have to live in the U.S and physically be located in the U.S in order ot use the U.S tunes store.  The same is true for each countrys itunes store.

  • Limiting or control for Residual payment with reason codes

    Hi FI Gurus,
    When we are received or making payment to customer or vendor, sometimes we need to clear the invoice by receiving or making payments with small differences through residual payment. Is there any control for limiting residual payment.
    Lets have an example
    invoice posted for 1000
    customer dr 1000
    sales       cr  1000
    Partial payment recd 500
    cash/bank dr 500
    customer cr   500
    final payment received 350 and balanace amount adjusted with residual payment by defining reason code like rounding off difference. So in this case accounting entry will be
    customer cr 350  
    rounding off diff 150
    cash/bank 500
    being final payment agaisnt invoice
    My question:   Is there any way to restrict the residual payment like 10% or 20% of total invoice i.e. 100 or 200 and not more than 20% ?  other wise sometime user may adjust any amount may be 100000 through this way by putting the same reason code, which is not fair.
    I checked SPRO setting but i did not get anyt setting relating to above case.
    If any body know, please let me know? Thanks in advance
    Regards,
    Prakash

    Hi Lawerance,
    Thanks for reply.
    But I am looking for amount adjusted through residual with reason code. I dont think there is any limitation or control in the SPRO standard setting. Tolerance is preventing user to post document for more than a specific amount. But my question is something different.
    I want to control the user for adjusting amount from residual tab with selecting reason code. In other words user should not adjust more than some limit with residual payment by selecting reason codes. Thanks.
    Regards,
    Prakash

  • Tcode to view the list of orders with reason for rejection

    Hi friends,
    Can any one tell the T.code or report to view the  list of sales orders or Scheduling agreements with Reason for Rejection updated.
    Kindly help.
    Regards,
    K.Vivek

    Hi Vivek,
    Use Tcode VA05 i.e. List of Sales Order. In this Tcode you can enter sales document type, sales area and other related data. After execution, from layout you can select Reason for Rejection from the list.
    This way you can filter all the sales documents including Scheduling agreements by using sales document types.
    Hope this will help you.
    regards,
    Sagar Wagh

  • Rejection of PO item with reason 06 - IDoc failure

    Hi,
    There is an IDoc failure with message: Rejection of PO item with reason 06.
    The user(supplier) wants to reject first line item of the Subcontracting PO and add a new line item instead with the right data.
    Please suggest.
    Regards,
    Akash Prekar

    Hi Dirk,
    You can actually use the BADI BBP_CREATE_PO_BACK to change the flag value before filling the PO Craetion BAPI interface parameters
    Sangeeta

  • Off-Cycle Payroll Run with reason Absence.

    Hello
    We are trying to execute Off-Cycle Payroll Run with reason Absence, however the /559 and /560 are showing Zero amount.
    We are running it via Offcycle workbench. Would it really make a difference?
    Here are the main configurations I have done:
    1. We have executed the regular payroll run for past one month (Jan 2010).
    2. We have maintained a 10 days absence for next month (Feb 2010)
    3. The Absence valuation is configured to generate WT 3000, in which I am able to pull the number of absence hours.
    My question is how to I get the per hour rate multipled by number of absence hours AUTOMATICALLY. I am looking to do it with configuration instead of PCR. Any thoughts?
    Scenario: Current month (Jan) regular payroll is over, and employee applied for half month leave in next month(Feb). Now, employee wants to take salary for those 15 leave days before going for leaves.
    Thanks
    Yash

    Hi Yash,
    I am not sure, if this functionality can be achieved without a PCR.
    I guess you need to write a PCR for this....
    Still you can try this using constants dependent on wage types path is IMG ->Payroll->Time Wage Type Valuation->Valuation Bases->Constant Valuation Bases->Constants Dependent on wage types.
    I have a question here, if you are paying the employee for the half month of absence before he took the leave, how will the system know when you run the regular payroll for him at the end of the month that employee already got paid for the half month absence?
    You should make sure that system doesnt pay him twice......
    Thanks,
    Janga K.

  • Calls Getting disconnected with reason code 26

    Hi,
    Few of my calls are getting disconnected with reason code 26. on agent screen it just flash and disconnect.as per RCD its showing Error code 0( fine) and finally its ending at Skill Group Node. talk time is 1 or 2 seconds. agents having auto answer setting as well as IP Phone set auto ans with headset.
    my setup is IPIVR based UCCE setup.
    Please help
    Regards-
    PK

    Hi PK,
    CD 26 normally indicates Resource Not available in CUCM side. please check the Jtapi gateway process logs for the failed calls. you should be able to see something similar to below
    19:08:37:896 PG1A-jgw1 Trace: ConnFailedEv CID: 27224748 Addr: 80002985 CiscoCause: CAUSE_RESOURCESNAVAIL Cause: CAUSE_RESOURCES_NOT_AVAILABLE.
    if that is the case , please check from CUCM perspective as well.
    Regards,
    Sasikumar.

  • Activate a user status when confirm with Reason for Variance

    Dear SAPper,
    I have a requirement to set a user status block order for good movement and confirmation
    when user confirm the order with reason for variance Z999 (machine broke down)
    In the order header, I have attach status profile ZBLOCK contain 2 user status
    a. UNR = Unrest ---> initial user status
    b. LCK = lock for good movement and confirmation
    In the reason for variance Z999 (machine broke) i have attach to status profile ZBLOCK user status LCK
    But when i tried confirm worh reason for variance Z999, why the order not updated to LCK for its status?
    Did i miss something?
    Kindly help?
    Best regards,
    Freddy Ha
    Edited by: Freddy Halim on Dec 4, 2008 8:49 AM

    solved.
    it is only works for operation
    and not order header

  • How to rewire ableton with main stage

    Need to rewire ableton with mainstage with mainstage as the master.
    help

    Hi
    Start Mainstage first, then Live (Mainstage can only be Rewire Master).
    Depending on you needs, you will want an audio return from Live.
    Create a Stereo Aux channel at Patch/Set/Concert level, set it's Input to "Ableton Live:Mix L/R.
    Now, when you press Play in MainStage, Live will play and any audio will appear at the Aux you have just created.
    That should get you started?
    CCT

  • Audio out of with reason

    Hi , I recently converted to Logic from cubase sx.
    however all my audio takes seem to be slightly out of sync with reason?
    I use a tascam us122 soundcard and I have an iMAC WITH 4 GB OF RAM.
    any ideas would be really welcome.
    thanks,
    Ali

    Hi William - first make sure that your extracted audio is locked to the clip exactly where you want it. Then uncheck the video track's tick box at the extreme right of the track (shouldn't actually be necessary - when audio is extracted, original audio is muted).
    Now select the clip and go File>Share>QT (full quality), with the Selected Clips Only tick box checked. Save to the desktop, then drag that new file into the Clips Pane.
    Test it, then delete the original.
    Message was edited by: catspaw

Maybe you are looking for