Rewire troubles with Max MSP

hello
In cant get rewire to work with Logic Express 7.2 and Max MSP 4.6.2. Max MSP works fine with logic gold 6.3.1, and Abelton Live, but I cant figure out how to get it going with Logic Express 7.2.
the MSP's ad_rewire driver tries to start, but can't see Express as a rewire host. MSP then crashes, and i have to restart OS X.
any ideas what could cause this? I don't know if its a problem with logic, or Max MSP or what...

Of course, you can set up MAX to receive midi input from anywhere, you don't have to "send" the input to MAX. What you want to do is block the input from the external device in MS via restricting what devices your kdb icon hears in Layout view, and make sure it's listening to the IAC Bus, which is the easiest place to send the MAX output to to get it to MS. Max also has it's own midi bus that materializes when max appears, but if you try to set MS to listen to that, your mappings may fly away if you ever open MS without MAX open first.
this is all off the top of my head, so some of the details may be close but not exact
Warren Sirota
http://www.ubetoo.com/Artist.taf?_ArtistId=6679

Similar Messages

Rewiring Max/MSP into Logic Pro 7

Hi-
Ok. My anticipated workflow at the moment is to generate "sketches" in Reason using the Combinator structure and some "seemingly" advanced re-routing / modulation ideas. From there, I like to go to Max and rebuild on these ideas, making the timing engine more mature, while triggering simple FM sounds in MSP, until I get a basic idea of what I want the sound, rhythm, etc. to be like...
Now here's the next (and unacheived part) I want to take this "engine" and rewire it into Logic so I can have the same timing, but control better sounding instruments / kits. Has anyone had any success with rewiring Max into Logic and controlling say, Ultrabeat, Battery, or other larger AU synths. If so, how is it done?
With this Max "engine" I'm looking to blur the lines between process and composition, but want to def. make more beat oriented / organic / generative tracks ala Autechre (and their infamous max-patch but with better sounds), Syndrone, or say someone like Aoki Takamasa and what he did in "Silicom Two"
Thanks in advance

Michael,
I sent this message to the Max list first.
Do you wish to send MIDI notes from Max=>Logic or audio signals?
One way to get MIDI notes from Max to Logic, is to do the following:
1) from [noteout] select "from Max/MSP 1" by double clicking the [noteout] object
2) in Logic's Environment, select "Click and Ports" (on the top left hand side)
3) in your Physical Input object disconnect the "Sum" output
4) on the output labeled "from Max/MSP 1", cable to the Audio instrument of your choice. Likely this object will not be visible from the "Click and Ports" layer of the Environment so OPTION+CLICK the Physical Input spot labeled "from Max/MSP 1" A drop down menu will appear in which you select your Audio Instrument. (this looks like the menu seen when assigning tracks to instruments in the Arrange) See Logic 7 Reference p. 208 for more on this.
5) Start sending MIDI notes from Max and they should be received in Logic
I can send you a Logic file that shows the Physical Input stretched out so you can see the MIDI input devices. Email me if you want to see the file. Hope this is helpful in some way.
Mitch

I am having trouble with plug-ins. How do I cure this? The last time I believe I had to update my operating system. My current operating sytstem is MAX OSx , Version 10.6.8

I am having trouble with plug-ins being blocked. I have an I-Mac, 2.4 Ghz processor, 2 GB memory, and using Safari as my browser. My operating system is MAC OSX Version 10.6.8

Any particular plugin or all of them? If Adobe Flash Player, try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

Rewire troubles

hello
In cant get rewire to work with Logic Express 7.2 and Max MSP 4.6.2. Max MSP works fine with logic gold 6.3.1, and Abelton Live, but I cant figure out how to get it going with Logic Express 7.2.
the MSP's ad_rewire driver tries to start, but can't see Express as a rewire host. MSP then crashes, and i have to restart OS X.
any ideas what could cause this? I don't know if its a problem with logic, or Max MSP or what...

bin,
(This same response is on the Max forum as well.)
I was having the same problem as you descirbe. Here's what I did to fix the problem. After restarting the computer on last Max/MSP hangup, I
1) Deleted all files called "MaxMSP Rewire Device"
2) went to http://www.propellerheads.se/download/ and got the most recent version of Rewire (ver. 1.7)
3) Repaired disk permissions (not sure this was needed but did it anyway)
4) started Logic then started Max/MSP
5) then I open the patches from my site called "MaxLogicRewire".
http://home.lagrange.edu/mturner/
click the "logic help file" link at the top. On the logic help files page, there is a Max Patch, a Logic file, and a text file describing how to Rewire the two applications together. Doubt you need these but they are there if you want to give them a go.
I am using PowerBook (1.5) PPC, OS 10.4.8, Max/MSP 4.6.2 LogicPro 7.2.3
All worked as expected. Hope this helps you,
Mitch

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

Trouble with Mac Unexpectedly Quitting

I have a iMac with the following hardware overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version: 1.20f4
I have trouble with programs unexpectedly quitting and am having trouble finding out what's wrong. The most problems occur when using Photoshop Elements 4.0.1 (which happens multiple times daily, usually if not always when I'm trying to save), but I've also had Safari quit unexpectedly. I've been working with both Apple Care and the Adobe technical support and have found no solutions as of yet. Here are all of the things I've tried to date (and none have yet solved the problem):
- Emptied Cache and Cookies folders
- Run Repair Disk Permissions & Verify Disk
- Re-installed Adobe Photoshop Elements
- Created a new user account and tried running the program from within there
- Booted up the computer in safe mode and run the program (still quit unexpectedly)
Was being helped by Apple Care once again and they were going to have me re-install Max OS X, but the guy suggested I post here first for advice.
I do have the option of upgrading to Max OS X Leopard, but didn't want to complicate things (although maybe they'd improve).
Any advice would be greatly appreciated. Definitely not a tech wiz, but do understand a bit.
Thanks for reading this...

Welcome to the Forums
Did you run Repair Disk from your Install Disc? Boot holding down the C Key
From the Installer Menu select Utilities>Disk Utility>Repair Disk..Reboot
Then..Applications>Utilities>Disk Utility>Repair Disk Permissions.

HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
Hi all,
When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated. However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
Thank you!
HN

Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG? Show the same area of the photo and zoom to 100%.
It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
The amount of grain depends on the ISO sensitivity setting on the camera.

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
I am having trouble making outgoing call or answering incoming call.
When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
For incoming call, it rings but when I pick up the call nothing happens,
Put the receiver back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue line. Any help will
be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
Thank you for your help.
hostname Test-CME
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
voice-card 0
no dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
control-plane
voice-port 0/3/0
connection plar opx 202
caller-id enable
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name admin secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3

Hi
Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
Thank you for your help.
Vitthal

I was having troubles with Firefox, so I tried to re-download it and I can't find a place to download Firefox for MAC OS X 10.4.11

There really are no no more details. The only version of Firefox that I can find that is available for downloading is not compatible with MAX OS X 10.4.11
This means I am really in trouble. I sent the version I was using to the trash because I was having so many troubles with it not connecting to various sites.
Where can I find a Firefox version that I can download?

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Trouble with SQL Expressions

Hello everyone,
I'm having trouble with this SQL expression that works in 8.5, and XI R2 runtime and designer, but I cannot edit the expression. As soon as I open the SQL Expression and click the X-2 check button, the error following
SQL Expression I'm trying to run:
(Select Distinct b1.CandEmploymentType
    from ceistaffing a1
    inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where a1.Staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID"
    and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
The Errror I Receive After Clicking the X-2 button:
Crystal Reports
Error in compiling SQL Expression :
Failed to retrieve data from the database.
Details: ADO Error Code: 0x
Source: SalesLogix OLE DB Provider
Description: The multi-part identifier "CEIHRPROJECTEDACTUAL.STAFFINGCHAINID" could not be bound.
Native Error: [Database Vendor Code: 181797304 ].
OK
This is the SQL statement passed to the database:
SELECT (Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where a1.Staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID"
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
If I reverse the order of the where clause as follows, I do not get the error
(Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where CEIHRPROJECTEDACTUAL."STAFFINGCHAINID" = a1.Staffingchainid
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
This is the working SQL statement passed to the database.
SELECT (Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where CEIHRPROJECTEDACTUAL."STAFFINGCHAINID" = a1.Staffingchainid
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
FROM   "sysdba"."CEIHRPROJECTEDACTUAL" "CEIHRPROJECTEDACTUAL"
I figured I would just reverse the where clause statements, but then I came to this one that I couldn't get to work:
(Select case when tmp.restartcount = 0 then 'F' else 'T' end from
(Select Count(b.restart) as restartcount from ceistaffing a inner join ceihrprojectedactual b on a.staffingchainid = b.staffingchainid
where a.candcontactid = (Select distinct candcontactid from ceistaffing a2 where a2.staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID")
and b.restart = 'T'
and a.createdate = (Select min(a1.createdate) from ceistaffing a1
               where a1.createdate > (Select max(a3.createdate)
                              from ceistaffing a3
                              where a3.staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID")
               and a1.candcontactid = a.candcontactid)) as tmp )
I've burned an entire day trying to find some solution. Are there any patches out there that will fix this?
I'm running Crystal Report XI Release 2 SP2 - Version 11.5.8.826
Thank you, ...Rob

Okay, to simplify the illustration of the problem Iu2019m facing, Iu2019ve created a bare bones example as described below:
I've created a report that returns all contacts from our "CONTACT" table. On the report, I've created a SQL expression to return a count of all contacts with the similar last name, as shown below:
(Select count(a1.ContactID) from CONTACT a1 where a1.LASTNAME = "CONTACT"."LASTNAME")
When I try to save the SQL expression, I get this error:
Crystal Reports
Error in compiling SQL Expression :
Failed to retrieve data from the database.
Details: ADO Error Code: 0x
Source: SalesLogix OLE DB Provider
Description: The multi-part identifier "CONTACT.LASTNAME" could not be bound.
Native Error: [Database Vendor Code: 205193720 ].
OK
This SQL expression works fine in CRW 8.5, but no luck in XI R2 SP4 - As mentioned above in the thread, this seems to be an issue solely with how XI R2 is parsing the SQL Expression. If I remove the "A1" alias from my expression all is good, but that will not work for some of the more advanced SQL expressions I have that are using joins and sub queries.
What will it take to get this recognized as an issue worthy of a hot fix? I'm at a stand-still here, facing the unfortunate possibility of having to re-architect many of my reports. Please help.
Thank you, ...Rob
Edited by: Rob Bartram on Aug 6, 2008 3:45 PM

Trouble with Playing Video Files

I have a new macbook pro and I am having trouble playing video files. It seems like it is having trouble with the size of the file. I need to get this figured out because I will be doing a lot of work with video including using final cut to edit. Any suggestions for me to speed up video play?

Any suggestions for me to speed up video play?
Max out your ram.
It seems like it is having trouble with the size of the file.
Please clarify.
Are the videos home made, downloaded from the net, browser videos, streaming videos, etc.

Having alot of trouble with a query

Hey, I'm having trouble with a query for an assignment. The questions states
Find the name of the highest earning employee in each location, excluding managers, salespeople and the president
The problem I'm having is that my query returns the highest earning employee from each location perfectly, but one of those returned is a salesperson, so the next highest earning person in that location should be returned.
We are also not allowed to create a temporary table
Here's my code so far
select
e.first_name,
e.last_name,
e.salary,
l.regional_group
from employee e
inner join department d
on d.department_id = e.department_id
inner join location l
on l.location_id = d.location_id
where e.salary = (select max(e2.salary) from employee e2
inner join department d2
on d2.department_id = e2.department_id
inner join location l2
on l2.location_id = d2.location_id
where l2.location_id = l.location_id
and e.job_id !=672;
the job_id refers to what job title they have
and here's the schema below
Schema
Any help you could give me on this would be fantastic as I have been pulling my hair out over this for the last day.
Edited by: 837562 on 17-Feb-2011 02:14

Maybe you can try the below:
with job_location as
select 1 location_id, 'loc1' regional_group from dual
union
select 2 location_id, 'loc2' regional_group from dual
department as
select 1 department_id, 'dept1' dept_name, 1 location_id from dual
union
select 2 department_id, 'dept2' dept_name, 2 location_id from dual
job_FUNCTION as
select 1 job_id, 'MANAGER' job_function from dual
UNION
select 2 job_id, 'SALES' job_function from dual
UNION
select 3 job_id, 'PRESIDENT' job_function from dual
UNION
select 4 job_id, 'REST_1' job_function from dual
UNION
select 5 job_id, 'REST_2' job_function from dual
employee as
select 1 employee_id, 'a' last_name, 100 salary, 1 department_id, 4 JOB_ID from dual union
select 2 employee_id, 'b' last_name, 200 salary,1, 5 from dual union
select 3 employee_id, 'c' last_name, 300 salary,1, 2 from dual union
select 4 employee_id, 'd' last_name, 400 salary,1, 2 from dual union
select 5 employee_id, 'e' last_name, 500 salary,2, 3 from dual union
select 6 employee_id, 'f' last_name, 600 salary,2, 3 from dual union
select 7 employee_id, 'g' last_name, 700 salary,2, 4 from dual union
select 8 employee_id, 'h' last_name, 800 salary,2, 4 from dual
select
regional_group, employee_id, max_salary
from
select e.regional_group, b.department_id, employee_id, salary, max(b.salary) over (partition by b.department_id order by b.department_id) max_salary
from
employee b,
job_function c,
department d,
job_location e
where
b.job_id = c.job_id and
b.department_id = d.department_id and
e.location_id = d.location_id and
c.job_id not in (1,2,3)
) where salary = max_salary;
"REGIONAL_GROUP"     "EMPLOYEE_ID"     "MAX_SALARY"
"loc1"     "2"     "200"
"loc2"     "8"     "800"

Trouble with Feedburner.

I'm having trouble with Feedburner.
I know this is not strictly connected to any Apple product, and it is not a iTunes problem... but I tryed to fix this since 4 days... without any result!
I'm the responsible for the website of my church, and I'm using Blogger for the blog, and Feedburner to produce the podcast link for iTunes. For the last 10 years I used it to produce a podcast for our church (in Italy). Had no trouble at all. Some days ago I tried to upload as usual our sunday podcast, but no media was created on the feed.
Looking at the XML source on Feedburner ther is no enclosure, while on the original post I put a media file storede on MediaFire (this one: http://www.mediafire.com/download/hgbgff4qptw2fy8/testimoniareanatale.mp3)
PodMedic says this: "Content Type reported: text/html; charset=UTF-8 Media enclosure not created because: The content type returned from your host server was a text type, not a binary media type. Podcast content should always return a binary media type, such as audio/mpeg for audio, or video/mpeg for video."
I tried all I could: stored file on a different storages (I normally use MediaFire), took all the other elements on the page connected to the feed that could interfere, checked several times if the media enclosure is mp3 (yes, and it works smootly on the blog), put the link straight on the blog page instead of on the title), piged and resync hundred of times... everything. But no solution at all. No media enclosure, they say.
I also tried to post an old media file which is working on a different post to see how Feedburner react: no media enclosure has been created even for this one.
There is anybody who struggled with the same issue?
My feed is:http://feeds.feedburner.com/blogspot/Allenatiallunit
The blog connected is: http://laveravite.blogspot.com
http://laveravite.blogspot.com/feeds/posts/default?max-results=36
Thanks to anyone who can help. Have a blessed Christmas!
Marco

None of your episodes work when subscribing. The media file URLs in the feed are Feedproxy ones, which lead to URLs in the same form as the one you quote above. These bring up a web page with links to download or play, not an .mp3 file.
Since the previous episodes appear in the feed it suggests that you originally had Mediafire set to provide a direct link to the feed but that you've somehow changed it to providing the page with the links, which won't work: then subsequently trying to add a new episode in Blogger has failed as it can't now see an mp3 file.
So you need to look into MediaFire. When you enter the URL for you media file into Safari it must play directly in Safari, not bring up a web page.

OpenGL trouble with nvidia-270.30-1

Hello everyone,
I'm experiencing some trouble after upgrading to nvidia-270.30-1. When I'm using my usual three screen/two card xinerama setup, starting the "Second Life" viewer will crash the X server (1.9.4.901-1) with a segfault in libnvidia-glcore.so. When using only one monitor, SL starts but everything that is not part of the UI will stay pitch black. However, glxgears and "Amnesia - The Dark Descent" work just fine, accelerated and everything.
So is anyone else experiencing trouble with this nvidia driver and OpenGL?
P.S.: Downgrading to nvidia-260.19.44-1 helps.
Last edited by Ochi (2011-03-26 15:51:29)

It seems related to what I've encountered today whilst starting a game in wine after a system upgrade, including nvidia.
$ wine .wine/drive_c/Program\ Files/Rockstar\ Games/Max\ Payne\ 2/MaxPayne2.exe
fixme:win:EnumDisplayDevicesW ((null),0,0x33f428,0x00000000), stub!
err:winediag:X11DRV_WineGL_InitOpenglInfo Direct rendering is disabled, most likely your OpenGL drivers haven't been installed correctly
It happens to all games I tried, resulting in a crash before they can actually start.
Last edited by Firestone (2011-03-26 17:44:33)

Rewire troubles with Max MSP

Similar Messages

Maybe you are looking for