Rewire won't work with Logic + Reason

I started a project with Logic + Reason and everything was working fine. But then one day it stopped working.
1. It'll work without Rewire (just a mixer in Reason)
2. The Aux channels on the Logic mixer don't indicate any levels.
3. The level indicators on the Hardware Device in Reason aren't indicating any signal
4. Rewire DID work one day after it wasn't working but now it isn't again.
5. I've tried restarting my computer and even changing my audio device to "Built-In Audio"
Why won't rewire work?
Message was edited by: RyConn M.D.

I have been having this same problem. One time Rewire will work and the next try it won't. I found that Logic will not see the Rewire channels when you go to add an Aux channel in the mixer screen. If you see the Rewire channels in this section, then Rewire will work. If not then Rewire will not see Reason and it will not function. It just started happening for me this last week or so. I wonder if Apple made some sort of change that is causing this problem. I never had a problem with Reason before this last week or so. It was always a really solid program interface before this. I am getting frustrated. I have reloaded Reason and Logic with no change. AI deleted the rewire files in the library. It may then function once and then it goes bad again. Can anyone Help Us?

Similar Messages

  • Apple Remote won't work with Logic

    I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

    jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
    I've searched the Internet and am finding little on this topic.

  • Waves 9 won't work with logic pro x

    I downloaded waves v9 but it still won't show up on my Logic Pro.  It is a 64 bit polgin

    If... you have updated to the latest version of Waves 9
    and...
    You have correctly installed/activated/validated them using the Waves License Center and the Waves AU Reg Utility (That you must run after installing the updates..)  then they work pretty good with Logic.  I know.. I use them on a daily basis... No magic... no special tricks...
    The Waves plugins themselves still have a few bugs in them which is why Waves keeps updating them..(There have been several updates to Waves 9 since release across all platforms and not just OS X...)  but it isn't anything to do with Logic... Its programming bugs in the Waves plugins themselves that cause the remaining issues..
    So.. if you cannot get them to work properly, contact Waves support for assistance...
    https://www.waves.com/login?ReturnUrl=%2fcontact-support
    There is little if anything,  anyone here.. or at Apple.. that can do to help you.. and to think its a Logic Pro problem... is just misleading yourself and wasting your own time...

  • Recording Interfaces that work with Logic Studio

    Hey there! I'm pretty much a noob to Logic Studio. I've been using garageband and reason 4 before that. I've had an M-Audio Fast Track that worked alright with Garageband, but it won't work with Logic, at least for me. I did some research and found out that this happened for most people.
    So I was wondering, what's a good recording interface that would work well with Logic (which should then work with garageband) that works very well and worth the money that's paid for it?
    Specs:
    Macbook Pro
    version 10.5.2
    2.4 GHz Intel Core 2 Duo
    2 GB 667 MHz DDR2 SDRAM
    Thanks alot.

    Welcome to the forum jareddddddd, i do believe the problem your having with the M-Audio is the the drivers for intel, at the moment are Beta drivers.
    Beta meaning they are going thought testing and isn't official drivers, therefore it might work or it might not.
    As flood123 said the Duet will be much better, compare to low end M-Audio interface, which will sound far better and integrates well with Logic.
    Also Fire-Face by R.M.E is a good interface, almost forget to mention Lavry interface which sounds way better than the two already mention that's only my opinion though.
    Personally i have found it to be my preferred choice compare to Apogee low end interface that hasn't got the C77 clock work that Apogee flag-ship interface has, such as the Rossette 800 and AD/DA 16 carries.
    Try and find a local music store and try out a few interface that is hook-up to L.P. by Fire wire and maybe you'll have a better choice in choosing.
    Fr.BlayZay.

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • I would like to update to Firefox 5.0.1, but I can't due to, too many things won't work with the version & will be disabled.

    I have wanted to update from 3.6.22, to 5.0.1, but can't do to the following reasons: I can't due to, too many things won't work with the version & will be disabled. They are: Microsoft. NET Framework Assistant 1.2.1, Iconix 3.90.1, HP Detect 1.0.5.1, Yahoo! Toolbar 2.3.5.201101200332202 (I don't care about Yahoo! Toolbar, because I don't use it!). As soon as these issues are fixed, I will be able to update, to the latest versions. These issues should be fixed & ready to work, before a new version is available. Thank you!

    Try using this extension to force compatibility.
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Check and tell if its working.

  • My new shuffle won't work with my operating system

    I was really pleased to be given a new shuffle for my birthday, but it won't work with my operating system. I feel disgusted and cheated; I have been using macs for years and don't see why I should have to buy a new one in order to use a piece of Apple technology. It's not good enough to say that the operating system requirements are clearly stated, as the person who bought me the shuffle didn't know that. I am so furious that I am thinking of going back to pcs next time I buy. Apple really should get their act together, because various forums I have consulted suggest that a lot of other people feel the same.

    Feel better now?
    We are all users here just like yourself so we cannot do anything for you besides making some logical suggestions to you. So if the person had bought you some 3rd party software that only worked with Leopard and/or Snow Leopard would by be just as furious? Just curious.
    You don't have to buy a "new one" to use your new Shuffle, just upgrade your OS. Are you using a PowerPC or Intel Mac Mini? If the latter just go buy a copy of Snow Leopard, install it on your computer and download the latest iTunes. Problem solved. If it is a PowerPC look around and find and install a copy of Leopard.

  • Satellite A300 - inbuilt Chicony webcam won't work with Win Live Messenger

    Hello
    I just bought a *Satellite A300-1MC* (runs on Vista Home Premium), and downloaded Windows Live Mail And Live Messenger.
    The inbuilt webcam won't work with Live Messenger ; and when selecting Tool, Audi + Vieo Setup in Messenger I get thye following message : "We are unable to run Audi Video setup".
    The webcam works fine with the Camera Assisant Software.
    I have tried : 1) killing the C.A. Software and starting Messenger ; 2) dowanloading a webcam driver from Toshiba website ; 3) Updating Windows Vista
    None of the above work.
    Any suggestion gladly received.....
    Thomas

    Hi,
    Many thanks for the advice.
    I have downloaded and installed ManyCam 2.3, then rebooted.
    The ManyCam software works fine, and picks up signal from the inbuild webcam.
    But Windows Live Messenger still doesn't pick up the camera. I can not start a Video call or go to" Video Audio setup".
    I have Windows Live Messenger version 14.0.8064 (installed on Tuesday).
    Funny enough, yahoo messenger works fine : it gets a signal from the webcam.
    Conclusion : i think it is Windows Live Messenger that doesn't work properly for some reason.
    I have ordered a new external webcam, in the meantime.
    Thomas

  • Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint.  I could do this yesterday and today it won't work for some reason.  The error says "an unexpected error occurred.  PDFMaker was unable to produce the Adobe PDF.  How do

    Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint.  I could do this yesterday and today it won't work for some reason.  The error says "an unexpected error occurred.  PDFMaker was unable to produce the Adobe PDF.  How do I fix this?

    Is there a log file in the document folder indicating what the problem was. There are a number of reasons that PDF creation may fail. You can try to print to the Adobe PDF printer to see if there is any indication in that process. The processing is different, but the same problems may show up with both processes.

  • Airport assistant in 10.8 won't work with airport express

    I updated to OS 10.8 from 10.6 and now the airpot utility says that it sees my airport express (about 4 yrs old)  but
    "This version of AirPort Utility doesn’t support this base station"  I tried an earlier version of airport utility but it won't work with system 10.8. Does anyone have a work around?

    Your Express is most likely over five years old.
    You need AirPort Utility 5.6 to configure an older Express. The problem with that version is that Mountain Lion will refuse to let you install it.
    This dilemma is easily solved. You simply need to extract the app from the installer package using a package extractor like Pacifist or unpkg. Pacifist is shareware, unpkg is free.
    Download Pacifist here: http://www.charlessoft.com/
    Download unpkg here: http://www.timdoug.com/unpkg/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
    Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
    Open Pacifist and from its File menu, navigate to the package and open it.
    Click the "reveal triangles" until you see AirPort Utility 5.6.app:
    Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
    The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
    Keep in mind that Apple's decision to abandon support for your original AirPort Express was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

  • HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

    I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
    Thanks

    it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
    Best
    Steve

  • My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

    My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

    Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

Maybe you are looking for

  • Count using a Key Figure

    Hi All, I have an issue using COUNT in a query. The issue is that I have to count the no. of material based on a certain KF, say sales. If the sales amount or value is non-zero then the material has a count of 1. If the sales amount is zero then the

  • Assign contract in BAPI_SALESORDER_CHANGE

    Dear Gurus,            I'm working on changing the sales order through 'BAPI_SALESORDER_CHANGE', my requirement is to assign the contract item pricing to specific item in sales order.           Assign contract is possible when you go thru va42  trans

  • Why do we use Setup tables in LO

    Hi All, Can any body tell me that Why do we use Setup tables in LO. Plz reply back me on [email protected] Regards, Kiran

  • Actionable link not display in email

    Hi all, I tried to achieve actionable link for (approve,reject) in the email but the email displays only the link for worklist application, it doesnt contain link for approve or reject. my config file looks wf_config: <actionableEmailAccountName>Defa

  • Macbook geht nicht in ruhezustand

    hallo, habe ein macbook pro was seit ein paar tagen nicht mehr in den ruhezustand geht wenn ich den deckel schließe. das weise licht rechts leuchtet dauern und 'atmet' nicht mehr wie bisher, die festplatte scheint zu laufen (leise geräusche).