Rewired Reason with Logic

Hey guys,
I am new here. I successfully rewired reason so I can hear it in Logic, but the only problem is that I hear both programs playing the sound. There might be a quick and easy solution that I do not know of since I am quite new to logic.
Anyways hope you guys can help me out!

I had the same problem.... contacted Reason Support and they said the following :
"You have to go to Reason Menu > Preferences > keyboards and control surfaces and un-tick the 'Use with Reason' box next to your keyboard."
Trouble is that when you use Reason in Stand alone then you need to check the boxes back again.
Hope this works
Fingers...

Similar Messages

Help with rewiring Reason into Logic?

IM trying to rewire Reason into logic. When i insert a midi file into a channel and hit play reason will NOT play the midi and make sound.
Is there anything im missing?

All midi needs to be routed through Logic. Don't use the preferences in Reason to get midi to it by 'sidetracking' Logic.
All midi goes into the Master (Logic) and then goes to to the rewire slave.
Make sure you understand the signal path.
"SIDENOTE on Reason's 'BUS' system for internal rewire objects
Bus1: addresses the currently selected device in Reason (i.e., the little keyboard icon in Reason's sequencer is not grayed out)
Bus2-5: Uses Reason midi Bus A-D
Bus6 (and up): starting at the first device and goes till the 16th device in Reason's Rack. So in your Reason rack Bus6 can access device # (1-16), Bus7 can access device # (17-32), etc...
Bus6 is sometimes the most useful, but realize that you can run out of devices and then you need to go to Bus7 to access more devices in your Reason rack. "
That tells you everything you need to know. If you understand how the Environment in Logic works, you shouldn't have any issues setting up Reason as a Rewire Slave.
MBP 2.16 LP7.2.3 RME FF800 Mac OS X (10.4.9) RMX Reaktor 5.1.2 Reason 3.0.5 Live 5.2 Battery 3.0.1 Recycle 2.1 DFH

How to rewire reason to logic?

I have reason 4 and logic 8, I watched the 101 tutorials but no explanation on how to rewire. Can someone please explain to me how to rewire reason to logic?

Try this awesome video tutorial:
http://www.youtube.com/watch?v=RBGVZZu9Mto

Running reason with logic

I've followed the steps at this website
http://audio.tutsplus.com/mixing-mastering/how-to-rewire-individual-reason-instr uments-into-logic-pro/
to rewire reason 4 to logic. in other words, to record with reason's midi sounds directly into the logic arrange window. Everything worked, I can hear and record whichever reason software instrument i choose in logic.
However, whenever I playback the tracks altogether that are already recorded in the logic project, everything is jumbled. The drums and guitar and vocals are all out of sync, playing wherever they want and it sounds like chaos. Does anyone know how to fix this problem? It only happens when reason in running at the same time as logic...

Hi,
Yes the Scarlett 2i2 will work with Logic Pro or Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
Hope this information helps.
Best regards.

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Cant rewire reason 5 to Logic 9 after Mavericks update

Hi there,
I am using Logic Pro 9.1.8 and Reason 5 and was having no trouble rewiring Reason to Logic untill I updated to Mavericks OS, after which Reason simply doesn't rewire to Logic anymore. I tried running Logic in 32 bit as well as 64 bit mode but it has't made any difference - I start Logic and then Reason (normal rewiring proceedure), but Reason is running independent and not rewiring.
Any ideas what I could do to fix this?

I'm the editor of the macProVideo.com Hub - where you can find loads of free useful tips and tutorials on Logic, Reason, After Effects, Pro Tools, etc.
Here's the link to the current Reason tutorials (loads more on the way):
http://www.macprovideo.com/hub/category/propellerhead-reason
Here's a link to couple of articles that are tagged with rewire too that may be helpful:
http://www.macprovideo.com/hub/search?query=rewire
If you need a more structured approach then I'd highly recommend the Reason video tutorials here:
http://www.macprovideo.com/tutorials/reason-application
Cheers
Rounik

How do i sync reason to logic x?

how do i rewire reason to logic x?

This little video tutorial will tell you all you need to know. I ReWired Reason for the first time to L.E. using this last week, works a treat.
http://www.youtube.com/watch?v=IxVzDwQipzw&search=logic%20reason%20rewire

Rewire won't work with Logic + Reason

I started a project with Logic + Reason and everything was working fine. But then one day it stopped working.
1. It'll work without Rewire (just a mixer in Reason)
2. The Aux channels on the Logic mixer don't indicate any levels.
3. The level indicators on the Hardware Device in Reason aren't indicating any signal
4. Rewire DID work one day after it wasn't working but now it isn't again.
5. I've tried restarting my computer and even changing my audio device to "Built-In Audio"
Why won't rewire work?
Message was edited by: RyConn M.D.

I have been having this same problem. One time Rewire will work and the next try it won't. I found that Logic will not see the Rewire channels when you go to add an Aux channel in the mixer screen. If you see the Rewire channels in this section, then Rewire will work. If not then Rewire will not see Reason and it will not function. It just started happening for me this last week or so. I wonder if Apple made some sort of change that is causing this problem. I never had a problem with Reason before this last week or so. It was always a really solid program interface before this. I am getting frustrated. I have reloaded Reason and Logic with no change. AI deleted the rewire files in the library. It may then function once and then it goes bad again. Can anyone Help Us?

Rewire Reason 2.5 with Logic 7.2.3

Hi does anyone know how to rewire Reason 2.5 into the latest version of Logic 7 (7.2.3) I am running on an Intel iMac does this make any difference with the universal code or doesn't it make any difference?...
Please advise.
Richard Ginns.
Intel iMac Mac OS X (10.4.9)

Good Morning.
Straight from the horsies' mouth,as it were:
"Will I be able to run Reason on an Intel-based Mac?
Yes, you will, but you need to run Reason 3.0.5, which can be downloaded by all registered Reason 3.0 users from the download section of this website."
I guess it's easier to go to the WRONG forum to ask these questions,and have one of us 'ole guys slam dunk a quote from Propellerheads' website,than for you to research properly.
As you were...

Reason Rewire with Logic Pro 7.2!

Hey guys,
I had no problem rewiring Reason in 7.1 on my PowerPC Mac Mini, but on my Intel Macs, with 7.2, Rewire is not an option in the Channel List on an Audio Object or Aux. I notice there is still rewire layers in the Env, but I'm confused about the one slave, two slave thing, (A and B). Am I doing something wrong? Or do I need to update Reason from 2.5 to 3.0? Help! Please!

For Rewire to correctly work on Intel Macs, Both apps need to be running under Rosetta. Since Logic is a Universial Binary, there isn't a way to run Reason as a rewire slave from Logic.
You'll have to wait till a Universial Binary of Reason is released.
more info http://www.propellerheads.se/
"Early testing using the Apple Developer Transition Kit shows that:
-Reason will continue to run in Rosetta, but the performance loss is similar to running Reason on a G3.
-ReCycle runs fine in Rosetta, with no measurable performance issues.
-ReWire works, as long as all applications in the session are PowerPC-based."
Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 Motu 896 Mac OS X (10.4.5) Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1

Reason beat tempo not syncing with Logic Tempo???

Hi,
Made a beat in Reason 5
Exported loop at 137 bpm and saved to external hard drive.
Imported loop into Logic with Logic tempo set at 137 bpm.
Set the metronome on for recording. Pressed record and and beat & metronome are out of sync.
I used beat detection to try find the tempo (said it was 137.1672 or something) yet still the metronome & beat go out of sync...
Any ideas?
I'm going to try saving the beat to the internal harddrive and see if that is the problem.
The external hard drive is USB not firewire.
Hope you can help me...

to bring your reason audio into logic in perfect sync, open reason as a rewire slave to logic and set up a logic aux track input to reason L&R. Set your locators in logic to the loop length and bounce (with "add to audio bin" enabled so its easy to drag it into your song). This locks the 2 clocks together. Which drive your audio is on is irrelevant.

Propellerhead's Reason 4 with Logic Express 8

Hi, I cannot figure out how to open Propellerhead Reason 4 inside Logic Express 8. I need the instruments with Reason, so I can record in Logic Express 8. Reason works fine as a standalone, and I have been using Logic Express 8 since it came out. Thanks

Here is a quick guide how to use Reason in ReWire mode in Logic.
Start Logic first and only after it boots start Reason (otherwise ReWire mode won't work).
In Logic, load up a project or create a new one. Go to Mixer -> Options -> Create New Auxiliary Channel Strips. This creates a new Aux channel in mixer. Go to its input slot and select Reason - > RW:MixL/R. Adjust the Aux channel volume so you can hear what's being played back.
Open up the project in Reason.
At this point you should be able to hear Reason input through Aux channel in Logic when you start playback.
With a bit of additional messing around in Logic's Environment, you can use Reason as an virtual external sound module. For that you have to create a ReWire object (or a number of objects, each representing different devices in Reason). To configure any object in Environment you have to click on it and select necessary options on the left side of the Environment window. You should also cable ReWire object(s) to Physical Input Device, so that note information reaches Reason devices.
After that is done, create External MIDI track(s) to record MIDI parts for your ReWire sound module.
You can also use Logic's effects on Reason's instruments used as sound modules in Logic (see above). For that you have to connect instruments in Reason directly to Hardware Interface (for that press Tab, Reason's GUI swaps to cable/connections mode where you can make all necessary adjustments). When it is done (note what instrument goes to which output), go to Logic and create as many Aux channel strips as there are instruments in Reason that you want to use. Assign Aux channels to individual ReWire outputs: click-hold Aux's Input slot and select Reason -> RW:Cha3/4 or RW:Cha7/8, as an example (it depends what hardware interface channels you assigned Reason's devices to).
After that is all done, just click on insert slot of Aux channel and select an effect plugin you want to use.

Help Needed with Rewire - Reason

Hi guys
really need help with this 1.
I have been trying to route reason to logic for the past few days using Logic 7.2 and Reason Intel update.
I must add firstly that I have had this running but now there seeems to be something wrong.
I am doing all the usual like creating a Rewire oject that is routed to an arrange track.
I have everytinng ready in Reason and everyting seems to be working ok with even the output levels / note on etc etc showing there is activity.
Also Logic Rewire seems to be set right with reason selected and the rewire program and i can select the seperate devices within reason under the channel selector.
I just cant get any audio to com e through to logic when I program in notes, or do basically anything.
Routing the Rewire L + R channel to a audio track is ok this is why it is really blaggin my head.
Please please help some1
Many thanks
Fearny

>
That's way too much code. Next time please post an SSCCE
when I run the testClearTable() method i get the following exception
Exception
occured at clearTable: java.sql.SQLException: No suitable driver found
for jdbc:mysql://127.0.0.1/onlineExamTable cleared!
You're trying to call DriverManager.createConnection(...) when the connection URL you're passing in is not valid for any driver you've loaded. So either your Class.forName to load the driver failed, or you loaded the wrong driver, or you messed up the syntax of the connection URL--each driver has its own syntax.
but evenso the test is returned as successful and the table does get cleared.. but why do i get the exception?Don't know. Not gonna read that much code.

Rewire Reason & Logic ?

I heard there was a way to use a midi file in Logic and have Reason play it.
Is this true ?
If so. How ?
I've only been able to use Reason with Rewire to mix the sounds from Reason within Logic.
It's a pain exporting midi files from Logic to use within Reason.
Thanks
Greg

Well I tried it a few times.
Some of steps in the tutorial don't happen the way it says.
I can't rename each individual rewire object like in step 5.
with one object selected I can change that name but when I select another object it has the same name as the first one.
When I change that name, then it changes the first one as well.

Reason 8.1 will not ReWire slave to Logic Pro X? Anyone else experiencing this?

Hi folks,
I'm running the latest version of Logic Pro X (10.1.1) and the latest version of Reason (8.1) on a brand-new Retina iMac running Yosemite (10.10.1).
Prior to this, I was running Reason 6.5.3 and I also have a copy of Ableton Live 9.1.7. (On the same brand-new iMac, to be clear.)
Here's the problem:
Old Reason (6.5.3) would enter ReWire Slave Mode with Logic Pro X with zero issue. Same goes for Live 9.1.7. But once I upgraded to Reason 8.1, it won't do it anymore. I'm doing the obvious things:
-I open Logic first, before Reason
-I've made sure that CoreAudio and ReWire are turned on in Logic's Audio Preferences pane (I've also tried toggling both on/off)
-I've made sure that both programs are running 64-bit (although I did try running Reason in 32 as an experiment)
-I've downloaded and reinstalled the latest version of ReWire (1.7, I believe -- might be remembering that version number incorrectly)
-I've tried all of this with and without my Reason Ignition Key in a USB slot
No matter what I try, though, Reason never slaves itself.
It WILL slave itself to Ableton Live, though. So, to be clear:
-Live will slave to Logic
-Reason will slave to Live
-Reason will NOT slave to Logic
Am I overlooking something really silly here? I'd love to find an answer to this question so I can get back to my usual workflow ASAP!
Thanks very much for your help. I really appreciate it.
Cheers,
Adam

Hey Adam,
I am also having rewire problems with Reason 8.1 into Logic 10.1.1 and as you experience it's not with Reason into Ableton or Ableton into Logic (although Ableton has crashed a few times this way). Everything worked fine for me up until I downloaded the latest Logic download last week.
Is your Reason loading up as normal in stand alone mode? For me, Rewire either works perfectly (10% of the time) or I get the error message 'Engine not responding. Please check your Rewire host'. I have tried reinstalling Logic and have checked lots of forums but cannot find any concrete answers.
It's kinda driving me crazy as I'm in the middle of a project so would like to get it sorted asap! Let me know if you find anything! M

Rewired Reason with Logic

Similar Messages

Maybe you are looking for