Rewrite rules and channel enquiry

Hi,
I need to setup all mail that is coming frm inbound mta, perform a check up on ldap whether it is a antivirus subscriber, though will route subscribed user to antivirus server(ims with 3rd party antivirus software installed), and non-subscribed user to be routed to mailstore.
Any idea how to achieve that? I am not asking the detail step but overall idea to do this. I have read docs but the more i read, the more confusing I am. Any example docs beside
http://www.sun.com/bigadmin/features/hub_techtips/route_email.jsp
Totally newbie here, FYI, this is ims6.3
thanks
Message was edited by:
haw_9368

Hi,
the antivirus software is trendmicro, installed in
ims6.3. What mechanism is being used currently to scan emails (e.g. conversion channel) and why can't the trend-micro software also be run on this system?
I dont think they have plugin or milter.Supposedly they do. Trend Micro InterScan Antivirus for Sendmail uses a milter API interface according to:
http://de.trendmicro-europe.com/global/products/collaterals/datasheets/DS08ISAV041014US.pdf
The other option would be to use another milter program such as MIMEDefang which can use Trend Micro to scan emails for viruses (plus much more). http://www.mimedefang.org/
Will
you or other gurus come out a tech tips writing
article regarding this kind of scenario?Well this particular scenario has already been considered as I mentioned earlier and the filter plugin mechanism was developed.
Routing emails to another email server for scanning as mentioned previously is very inefficient so not something I plan to document - better for your customer to be pushing Trend Micro for an efficient mechanism to integrate with MS6.3. If Trend Micro are willing to work with Sun I'm sure we can work out a good integration method (as we have with other AV providers).
Regards,
Shane.

Similar Messages

Rewrite rule and dinamic group

I have put the rewrite rule
domain.com $A$E$F$[email protected]
In Java Enterprise System.
This way, mails send to or from [email protected] are routed to mailhost and that is ok, but when I send a mail to a dinamic group, the message is not sent.
the command imsimta test -rewrite [email protected] reports this at the end:
Address list error -- 5.1.1 unknown or illegal alias: [email protected]
What could be happening?
Thanks,

Your original rule is not the best way to go about routing to "domain.com"
I would start by removing that rule.
Then I would look at what you're really trying to do, here.
If you're trying to route mails to users that are in your ldap server, then they should be automatically routed, based on the value of "mailhost" you're put in for them.
If you're trying to route users that are not in your ldap, then you need to create a
domain smarthost
documentation in our provisioning guide, here:
http://docs.sun.com/source/816-6018-10/domains.htm#29147
Using rewrite rules for routing outside the MTA is a Bad Idea, as you've found.

Rewrite rules: how to forward all mails to the specific channel?

I have written an anti-virus plugin using the MTA SDK. Now I want to forward all the incoming messages to the channel, which is 'guarded' by my program (so my program is the channel's master).
I've added following to the end of imta.cnf, according to MTA SDK example:
! kav
x-kav master_debug logging
x-kav-daemon
And at the beginning of imta.cnf:
avp.ru $U%avp.ru@x-kav-daemon$Nx-kav
avp.ru $[email protected]
In this configuration, any incoming mail just miss my channel completely.
I changed it to this one:
$* $U%avp.ru@x-kav-daemon$Nx-kav
<2nd line removed>
in this case, mail is sent to our channel, but has host part '$*', and the message is failed to enqueue.
Also, it seems like this reqrite entry conflicts with ours:
! Rules to select local users
$* $A$E$F$U%$H$V$[email protected]
ultra5.avp.ru $U%$[email protected]
avp.ru $U%$[email protected]
As I understand, according to these rules, everything goes to @avp.ru or @ultra5.avp.ru goes to the local delivery channel ultra5.avp.ru. This is not what I want.
So, the questions are:
1. How to move all the messages (or just messages. which matched the specific domain) into my channel?
2. How to configure rewrite rules, so the message can leave the channel after processing, and continue the routing?

Still doesn't work.
We've downloaded and installed patch 116568-52, and configured the channels:
tcp_local aliasdetourhost tcp_scan smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0
tcp-daemon
! tcp_intranet
tcp_intranet aliasdetourhost tcp_scan smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4 tcp_intranet-daemon
tcp_scan smtp mx single_sys subdirs 20 noreverse maxjobs 7 pool SMTP_POOL dequeue_removeroute
tcp_scan
After sending the message, it silently goes to tcp_scan channel, and handled by channel master program. After that the message stays in tcp_scan queue forever, with HELD extension.
Our channel master enqueues the processed message into the channel where it dequeues it, so the message seems to be looped. Here is the message:
t;1093881341
p;3
*;4
u;mailsrv
c;tcp_scan
s;tcp_scan.ultra5.avp.ru
n;f
h;<[email protected]>
m;[email protected]
d;20
j;rfc822
f;[email protected]
@tcp_scan:[email protected]
..Boundary_(ID_+ko348xG8vRKcadifuDhJg)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from localhost.localdomain ([172.16.0.35])
by ultra5.avp.ru (Sun Java System Messaging Server 6.1 HotFix 0.01 (bu
24 2004)) with ESMTP id <[email protected]> for test@avp.
(ORCPT [email protected]); Mon, 30 Aug 2004 19:55:39 +0400 (MSD)
Content-return: allowed
Date: Mon, 30 Aug 2004 19:55:39 +0400 (MSD)
Date-warning: Date header was inserted by ultra5.avp.ru
From: [email protected]
Subject: sent on Mon Aug 30 19:58:29 2004
To: Undisclosed recipients: ;
Message-id: <[email protected]>
..Boundary_(ID_+ko348xG8vRKcadifuDhJg)
How to avoid this loop? Should our master enqueue the processed messages into another channel? If yes, what channel should we enqueue to? If no, how to avoid this loop?

IAS 6.0 and Rewrite rules

Hi,
I have worked with Apache JServ in which you have the concept of Rewrite
rules in one of the property files.
How does the same concept work with iAS 6.0?
Thanks
Uzma

Based on my (limited) understanding of JServ rewrite rules, rewrite rules
are essentially a regex tool for URL modification that takes place at the
webserver tier before the servlet engine sees the request.
So, you should be able to implement something similar in an NSAPI plug-in at
the webserver tier. Or by using an ISAPI plug-in if you are using IIS, or
mod_rewrite if you are using Apache. (I don't know if anyone has already
implemented such a plug-in in NSAPI or ISAPI). Just make sure that the
re-write plug-in is before the iAS plug-in.
You could try to do something similar with servlet mapping at the iAS tier,
but that route is much more limited. Wildcards as opposed to regular
expresssions. And you ability to map servlets would be limited to URL's that
are already in the context of the webapp.
David
Uzma Siddiqui wrote:
Hi,
I have worked with Apache JServ in which you have the concept of Rewrite
rules in one of the property files.
How does the same concept work with iAS 6.0?
Thanks
Uzma

IP-specific MTA rewrite rule

Hello,
I'm having a lot trouble understanding how to configure the iMS 6.2 MTA to do my will. I've read the MTA sections in the Messaging Server Administration Guide and still it seems that when I try to implement a rewrite rule, it doesn't work the way I thought it would.
So with that preface, I'd like to ask:
1) What would an imta.cnf rule look like that would route all incoming messages from a server at an IP (say 1.2.3.4) to a specific channel (say tcp_scan)?
2) Does anyone know of any good (or even marginal) books or other resources for learning how to program the iMS MTA?
Thank you,

Yes, there's a book on iMS. You can get it on amazon.com.
check out the unofficial page at:
http://ims.balius.com
as well.
No, you can't use a rewrite rule to route based on source ip.
You can use mapping file and channels for much of that. Far better to help me understand what your goal is, rather than for you to try to solve your problem by the wrong route....

Rewrite Rules for Active X

I would like write rewriting ruleset for an ActiveX application... this the html
<object width=100% height=100% classid="CLSID:1EE104B2-B32A-43d2-8DF1-2FD84BD00B14"
codebase="/wi/ActiveX/WIPanelXIT.cab#Version=5,1,4,33">
<param name=Cookie value="ITwGzbHZkSQT0">
<param name=CacheKey value="c0">
<param name=RepositoryID value="13">
<param name=UniverseName value="Extracom">
<param name=UniverseID value="70">
<param name=HostURL value="/wi/bin/iswi.dll">
<param name=ResultsPageURL value="http://mydomain/docViewFrameTop.asp">
<param name=AllowRefresh value="-1">
<param name=AllowLOVRefresh value="-1">
<param name=AllowViewSQL value="-1">
<param name=AllowDrill value="-1">
</object>
I need that the gateway rewrites only the parameters ResultsPageURL and HostURL. The rewrite is applied only to the tag codebase.
With Portal Sun 3.0 I have implemented the rules but the ActiveX application doesn't work. Someone have a similar problem with ActiveX? Any suggestion?
Thank you in advance.
Best Regards
Fausto

Thanks a lot Jay. Everything is working fine.
I managed to make things work following your advice but without calling tech support.
I am using mailEquivalentAddress attributes for users with domain.nl addresses. In our case, some users have domain.com AND domain.nl addresses while others only have the domain.com.
All rewriting works like a charm. I have set up noreverse on channels to forbid rewriting of "from" addresses, and the mailEquivalentAddress attributes deny rewriting of the "to" when mail is sent to these particular users.
Could you explain why the noreverse is discouraged? Would there be a rewriting rule that would do the same?
I can see reasons why not having rewriting would be an issue. If I find a solution to not having something as "strict" as the noreverse, I will indeed go in that direction.
Thanks again for your help.
Hyde

URL Rewrite Rule: HTTP to HTTPS Not Working

Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
features.
I've trolled through the Internet for 2 days now for solutions to my problem, including the ones provided by the TechNet forums and by MVP Scott Forsyth. I've tried over 30 solutions, and none have resolved my issue. Granted some of the solutions I've tried
may have been repeats of others. After trying so many, I have had a hard time discerning the differences. Does it really matter, for instance if the pattern match for the {HTTPS} input is specified as
"^off$" or just "off"? I see this discrepancy (among others) everywhere. It seems like there are so many variations out there. It is quite confusing for the uninitiated and the newbies like myself to the
URL Rewrite technology. I have enabled and consulted my "Failed Request Tracing Rules" logs but cannot make any sense of the cryptic information it is providing.
I just cannot get my reverse proxy server to redirect http requests from the Internet to https to my internal web server. When a user specifies "https://server1.xxxxx.com". he is able to access the internal server via the reverse proxy (IIS) server.
But when he specifies "http://server1.xxxxx.com" he receives "Server Error 500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed."
At this point I am at my wits end, and am even considering configuring the protocol translation on our firewall. But this not my preference as it presents another layer of complexity, and device to troubleshoot later on. Below I've pasted my entire web.config
file with my most current version of the rule in question (in bold) for your review. I started to paste just the specific rule, but thought you might need to see the entire file in case something else may be conflicting with the rule.
Thank you in advance for your help.
Dave Robinson
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
    <system.webServer>
        <rewrite>
              <rules>
                <clear />
<rule name="HTTP to HTTPS Redirect" enabled="true" stopProcessing="true">
                <match url="(.*)" />
             <conditions>
                  <add input="{HTTPS}" pattern="off" />
                </conditions>
                  <action type="Redirect" url="https://{HTTP_HOST}/{REQUEST_URI}" redirectType="Found" />
          </rule>
<rule name="ReverseProxyInboundRule1" stopProcessing="true">
                    <match url="(.*)" />
                    <conditions logicalGrouping="MatchAll" trackAllCaptures="false">
                        <add input="{CACHE_URL}" pattern="^(https?)://" />
                    </conditions>
                    <serverVariables>
                        <set name="HTTP_X_ORIGINAL_ACCEPT_ENCODING" value="{HTTP_ACCEPT_ENCODING}" />
                        <set name="HTTP_ACCEPT_ENCODING" value="" />
                </serverVariables>
                    <action type="Rewrite" url="{C:1}://server1.xxxxx.com/{R:1}" />
                </rule>
            </rules>
            <outboundRules>
                <rule name="RestoreAcceptEncoding" preCondition="NeedsRestoringAcceptEncoding">
                <match serverVariable="HTTP_ACCEPT_ENCODING" pattern="^(.*)" />
                <action type="Rewrite" value="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" />
                </rule>
                <rule name="ReverseProxyOutboundRule1" preCondition="ResponseIsHtml1">
                    <match filterByTags="A, Form, Img" pattern="^http(s)?://server1.xxxxx.com/(.*)" />
                    <action type="Rewrite" value="http{R:1}://server1.xxxxx.local/{R:2}" />
                </rule>
                <preConditions>
                    <preCondition name="ResponseIsHtml1">
                        <add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
                    </preCondition>
                    <preCondition name="NeedsRestoringAcceptEncoding">
                        <add input="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" pattern=".+" />
                    </preCondition>
                </preConditions>
            </outboundRules>
        </rewrite>
        <tracing>
            <traceFailedRequests>
                <add path="*">
                    <traceAreas>
                        <add provider="ASP" verbosity="Verbose" />
                        <add provider="ISAPI Extension" verbosity="Verbose" />
                        <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module,FastCGI,WebSocket"
verbosity="Verbose" />
                    </traceAreas>
<failureDefinitions timeTaken="00:00:00" statusCodes="404" />
                </add>
            </traceFailedRequests>
        </tracing>
        <httpErrors errorMode="Custom" />
        <httpRedirect enabled="false" destination="" exactDestination="false" childOnly="false" httpResponseStatus="Permanent" />
    </system.webServer>
</configuration>

On Wed, 28 Jan 2015 17:53:41 +0000, dwrobins2000 wrote:
Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
features.
Web/IIS related issues are better posted where the IIS experts are:
http://forums.iis.net
Paul Adare - FIM CM MVP
"The equivalent of treating dandruff by decapitation"
-- Frank Zappa on the Parents Music Resource Center' censorship plans

How to create rewrite rule to accept only mail pass from antivirus server

I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
How to create rewrite rule for this case?

Please read this technical note, for setting up such a configuration:
http://ims.balius.com/downloads/AlternateConversion.pdf
Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser.

URL Rewrite Rules in 10.1.4

Hi,
I am having some trouble rewriting the urls, I can't make it work ...
What I want is to change the url:
http://www.mycompany.com/portal/page/portal/portal_sverige/
to
http://www.mycompany.com/sverige
Where "portal_sverige" is the page group.
What I did was:
Configure the properties in the page group:
Search pattern: /portal/page/portal/portal_sweden/
Replace pattern: /sweden/
And I went to enterprise manager, MT, http server, administration, advanced server properties, httpd.conf, and put in the lines:
RewriteEngine On
RewriteRule ^/sweden/(.*)$/portal/page/portal/portal_sweden/$1 [PT]
However, when I try to use navigator to edit a page in that group, I get:
http://www.mycompany.com/sweden/pagename?_mode=16
Returns:
Object not found. (WWC-50003)
And just typing in www.mycompany.com/sweden returns 404 error instead of the root page as I would have liked.
Any ideas about what to do? I can't really find any information ... is the change made in the MT ? IM ? Do I have to do it in some specific order? Is the syntax wrong?
Appreciate any help, thanks

Hello Sayeeas,
I posted an answer to this question a couple months back... check out the thread
Re: Portal URL Rewrite
Here is the answer:
In this example the name of the page group is "www":
Our rewrite rule is also set up in a virtual host section of the httpd.conf file as well so some of the options may not be required for your set up:
RewriteEngine on
RewriteOptions inherit
RewriteCond %{REQUEST_URI} !^/(portal|pls|images).*$
RewriteRule ^(.+) /portal/page/portal/www$1 [PT]
The rewrite condition allows us to ignore the rewrite for certain items in the path. This allows the portal navigator to work. There may be a couple more items that need to be added to the condition because I recently noticed that the help pages dont function properly.
In the portal configuration for the rewrite rule we specify:
Search pattern: /portal/page/portal/www
Replace pattern:
Thats right, the replace pattern is blank.
To see it in action check out http://www.sagelogix.com
-sean
Solutions Architect
http://www.sagelogix.com

Rewrite rule in mappings file

hi all,
in iMS 5.2, can any one suggest me how to write a rule in mapping file so that any mail sent from a particular user (say [email protected]) is also sent (i.e. Bcc 'd ) to [email protected] in addition to the "To:" address which the mail actually goes.
this is required to monitor all mails originating from the address [email protected]
regards,
rajesh.

Yeah, no.
1. there is no such thing as a "rewrite rule" in the mappings file.
2. Likely, what you want is a sieve rule, or a "capture" rule.
3. Or, perhaps save the files to disk, like this:
for capturing all messages to disk files (this doesn't mail the messages, just saves 'em on disk, invisibly)
Add to your mappings file like this:
MESSAGE-SAVE-COPY
tcp_local|*@your_domain|D|/usr/ip lanet/server5/msg-dusty/imta/queue/tcp
local/*/* $Y/usr/iplanet/server5/msgsave/$1/$2
Add more lines to capture both inbound and outbound. The above line captures mails sent to the internet.
files get written to the desination directory, for your examination. Since there's no "message" sent, if the destination account gets full, no message gets sent back to give you away. Less performance impact, too.
I have 4 lines in my MESSAGE_SAVE_COPY area, to capture messages for specific people. . You may need fewer or more, depending on your exact needs.

(OT) Incompatible Apache Mod-Rewrite Rules

The following Apache mod-rewrite rule works:
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
It displays URL's like mysite/About/Webmaster and
mysite/About/Search.
I've finally figured out how to apply a mod-rewrite rule to
my site's
home page...
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
It displays URL's like mysite/Arizona and mysite/Africa.
But when I combine them...
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
The first rewrite rule appears to knock the second rule out
of action.
Does anyone know how to modify either rewrite rule to make
them compatible?
Thanks.

On 4/26/06 8:52 AM, "David Blomstrom" wrote:
> The following Apache mod-rewrite rule works:
>
> RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
>
> It displays URL's like mysite/About/Webmaster and
mysite/About/Search.
>
> I've finally figured out how to apply a mod-rewrite rule
to my site's
> home page...
>
> RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1
[L]
>
> It displays URL's like mysite/Arizona and mysite/Africa.
>
> But when I combine them...
>
> RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1
[L]
> RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
>
> The first rewrite rule appears to knock the second rule
out of action.
> Does anyone know how to modify either rewrite rule to
make them compatible?
>
> Thanks.
I'm not an expert on mod_rewrite, but you might be able to
get what you want
simply by reversing the order of the rules:
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
In theory, that should redirect your /About pages, and the
[L] tells Apache
not to parse any more rewrite rules, so the first rule (which
looks like it
simply redirects *everything*) wouldn't come into play.
There's something about times when Apache still parses
rewrite rules even
after the [L] flag, though, so that might not work. Why don't
you see if
that works, and if it doesn't, we can look at it further.
Sonjay

Rewriter rules not applied

Hi,
I have a rewriter ruleset and two gateways. For one of the two gateways this ruleset is applied correctly, for the some rules of it are not applied.
The rulesets are applied to the same uri and the gateways have the same configuration.
We are using 30�40 rulesets in total.
This smells like a bug. Any suggestion someone?

The problem I have is the following rules:
<Function name="fetcher.open" paramPatterns=",y," />
<Function name="xml*ttp.open" paramPatterns=",y,"/>
     
<Function name="open" paramPatterns="y"/>
<Function name="*.open" paramPatterns="y"/>
Now, when we have this applied to a file on the right url which contains fetcher.open(1,2,3), it should rewrite the second parameter, but it is rewriting the first one.
Does anybody know about the order or specificness of the rules applied in the case above?
Best regards,
Tim

LDAP Auth Rewrite Rule in Mapping file

Hi,
We are trying to set LDAP Auth Rewrite rule in mapping file to get users First Name & Last Name or Display name & Mail Address from LDAP Server instead of users individual client settings.
In Messaging 5.2 we had the follwoing setting, but it does not work any more for Messaging 6.2:
LDAP Auth Rewrite Entry in mapping file:
AUTH_REWRITE
*|*|*|*@* $]ldap:///dir1.domain.com:389/o=domain.com?cn?sub?(uid=$3)[$ <$]ldap:///dir1.domain.com:389/o=domain.com?mail?sub?(uid=$3)[>$Z
We are running:
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS mta 5.10 Generic_118833-03 sun4u sparc SUNW,Sun-Fire-V240
ll appreciate for any help or clue
Thanks

Thanks Jay,
Well, here is what we want to achieve.
We are looking for re-writing the FROM address of Sender against the LDAP Entry as cn <[email protected]>. This should solve problem of where users have entered wrong FROM information on their clients or trying to spoof FROM address to other users.
Currently, The system delivers e-mail with FROM headers as per client entry instead of re-writing it against AUTHENTICATED userid.
Following is the IMTA.CNF and MAPPINGS lines:
IMTA.CNF
! ims-ms
ims-ms defragment subdirs 20 notices 1 3 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto
$U+$S@$D
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver
maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 mailfromdnsverify dropblank vrfyhide
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel sasls
witchchannel tcp_auth missingrecipientpolicy 4 mailfromdnsverify dropblank vrfyhide
! tcp_extranet
tcp_extranet smtp mx single_sys subdirs 20 noreverse maxjobs 7 pool SMTP_POOL mustsaslserver allowswitchchannel saslswitchcha
nnel tcp_auth vrfyhide dropblank mailfromdnsverify dropblank missingrecipientpolicy 4
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4 authrewrite 3
MAPPINGS file
AUTH_REWRITE
*|*|*|*@* $]ldap:///dir.domain.edu:389/o=domain.edu,dc=domain,dc=edu?cn?sub?(uid=$3)[$ <$]ldap:///dir.domain.edu:389
/o=domain.edu,dc=domain,dc=edu?mail?sub?(uid=$3)[>$Z
Thanks for your help

Glassfish 3.1.2.2 rewrite rule

What's installed
Glassfish 3.1.2.2
Apex Listener 2.0.4
Apex_4.2.2
Does anyone know if its possible to use Glassfish to Rewrite an inbound URL
such as
https://www.mysite.com
to
https://www.mysite.com/apex/f?p=1400:1
Under Weblogic it was ssl.config
RewriteEngine on
Rewrite Rule ^/$/apex/f?p=1400:1 [R=301, L]
Thanks
Derek

I don't know where this setting is specified but if I were you I'd be looking into the glassfish documentation and posting in a glassfish forum rather than posting in a webservices forum.
http://www.java.net/forums/glassfish/glassfish

Outlook "Manage Rules and Alerts" flashes and wont fully open

Hi ,
one of my custom got a tricky problem. His rules flashes on every PC. have tried change pc, reinstall outlook for several version (2k3,2k10,2k13). For server side, Exchange2010, have tried move user to another mailboxdabase. but nothing worked.
Each time i click "manage Rules and alerts", a log will recorded in windows app log "operation fail", Event id 27(not sure the exact words in english version. it is “操作失败” in chinese). detail message :
System
Provider
[ Name]
Outlook
EventID
27
[ Qualifiers]
16384
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-08T00:58:05.000000000Z
EventRecordID
740183
Channel
Application
Computer
XXXXXXXXXXX.com
Security
EventData
操作失败。
I think it is a server-side problem, until i found OWA works fine. which really drive me crazy.
after some google, and search in forum, i found a similar thread: http://social.technet.microsoft.com/Forums/office/en-US/f6b75a36-9af9-4153-a5f9-57061a5729c0/outlook-2010-manage-rules-and-alerts-only-flashes-and-wont-fully-open?forum=exchangesvrclientslegacy
After follow the advise to delete all rules via MFCMAPI tool, seems still not help. i could only post a question here.
thanks for any advise
Go Patriots

Glad to hear that. For the "Stop Processing More Rules", you can refer:
http://www.outlook-tips.net/tips/tip-42-stop-processing-more-rules/
http://www.msoutlook.info/question/340
Best Regards,
Steve Fan
TechNet Community Support

Rewrite rules and channel enquiry

Similar Messages

Maybe you are looking for