Rewrite the vhd file created by win7 image creation

Hi,
I'm trying to do something, something more to utilize the image vhd file, not just leave it there as a pure backup file.
After the vhd gets attached, it can be accessed as a usual hard drive. Change anything like copy a random file into it, name it file A, then reboot the system, press F8 and call the image restore procedure.
15min or more, I get the restored system. However file A meant to be in there at the exactly location I copied to, as a matter of fact it's non there..
Isn't that possible to customize the vhd file created by sys creation program? I even would like to apply differencial VHD storage to customize the backup VHD and eventually customize the physical OS at a low risk.
In this case, it seems impossible to make it work.

Many thanks man:)
About what I changed to the backup VHD file... Hmm, I would tell, huge!
Not just create a file, but a fully functional installation of Win7 with up-to-date software set. Whereas the physical machine( the host of the backup VHD file), which I just take as a nude sys with image-creation-and-restoration functioning. In another word,
the child VHD file is the future of its parent, as well as the nude host.
Well，in my case, no yahoo for where is the file I created, but yahoo for where is my fully installed windows!
Since we discussed so far, I'd like to share another phenomenon,weird one, which I think is the reason why I insist working on this.
My physical windows- the nude one, how does it get installed? Guess what! From VHD backup file, just through the restoration procedure, and it's done!(Before the nude, the ex is a dying version- which could no longer endure my toture... and the most original
root VHD backup came from that version before I killed it.)
Think about it, what I am trying to do right now is just to rerun the holy restoration...
Unfortunately, miracle dies in coincidence, it never happens again so far...
VSS is a nice clue, I shall follow.
Rgds

Similar Messages

What format are the .tmp files created by hp scanner deskjet f2400?

What format are the .tmp files created by hp scanner deskjet f2400? I had a customer get the dreaded "out of space" error after scanning over a hundred pages that she was going to have all in one multipage pdf. So all that work was gone (each page was a painstaking layout of multiple elements, etc.), except for the hpfAAAA.tmp files.
I'm trying to recover the data. I should say, the data is now recovered, but now I must figure out a way to use it. How can I open these HP .tmp files? What format are they saved in? There is no human-readable header to give me a clue.
If anyone can help me, it would be much appreciated. You will be saving a very nice woman many hours of work duplicating what she already did. Thanks,

Hi LC475,
There would be no way to read the .tmp file. Unfortunately she will need to free up space on her hard drive before attempting to scan the documents again.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

When is the ear file created , is it on deploy or when the project is built

When is the ear file created , is it on deploy or when the project is built
in which case whats the path on the file system??

Hi Saket,
The ear file is created when you do the following. DC Build of the project, Deploy and Run application, Deploy when there are changes made after last deployment, When you deploy for the first time, Create Archive option etc.
A sample path of the ear file is as follows
Workspace\CE711SP1.jdi\LocalDevelopment\DCs\demo.sap.com\actionvalidationtest\_comp\gen\default\deploy
@Siva Thanks for pointing out the mistake. A Webdynpro build or rebuild will not create the ear file. But a DC build will create the ear file though. I have corrected my post.
Hope this helps,
Sanyev
Edited by: Sanyev Babu on Feb 15, 2009 10:25 PM

How to use sdk to get the image in the pdf file created by illustrator?

I have some pdf files create by illustrator and saved as pdf documents,
now I want to use the sdk to get the image in pdf files.
how to?
Thanks.

Thank you first!
Yes,you are right,since I am new to illustrator,and I want to try to write a plugin,
I have read the sdk doc and API and opened the sample in vs2010,but no idea about how to operate the pdf doc in illustrator with api.
Hope more advise or any examples,thank a lot.

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

What is the preferred file format for vector images for use in Microsoft SharePoint so that they do

I have been having a hard time figuring out how to export vector images and then have them show up in Sharepoint looking as good as they do prior to being imported to SP. I have tried EMF files, PNG's, jpgs.
original file above -
how it looks in sharepoint
Thank you -

Sharepoint automatically saves two preview images in jpg format on the server durin upload. The quality of those preview/thumbnail images cannot be influenced, and as you can tell, is quite bad.
This behaviour can be turned off in the code of the page(s) by setting the ThumbnailsEnabled property to false.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spdocumentlibrary.thumbnailse nabled.aspx
The original is not touched in any way, though - it is still available for use.
When browsing from a picture library if you click on the thumbnail, then the resize option, it will show your original png.
SharePoint automatically creates two JPG images every time you upload image to a Picture Library: they are thumbnail image and web preview image. They're stored along with the original image in the Picture library.
No in-place conversion happens: the image is converted only once during the initial upload process.
SharePoint needs these extra images to display picture library thumbnail views and item forms correctly, quickly and not causing excessive server load.
You can retrieve your original image at any time, it has permanent server path and could be accessed directly for whatever you need.
Source: http://sharepoint.stackexchange.com/questions/35876/png-get-converted-to-jpg-when-uploadin g-to-image-lib

Unprotect the PDF file Created by Designer 7

Can anyone help me to unprotect the file created by designer 7. I didn't trigger the security features of this program. What happen is that, I already finished the design and already save the file but when I try to use Professional 7 to merge it with my other PDF, the error message appear "The file .....PDF is protected." I'm a first time user of this program.
Thanks

I have the same problem. I created a form from a pdf file and then wnated to add a page, from another form, as you can do with acrobat and the "insert pages" is grayed out. I tried to create a pdf file by "create pdf...from multiple files" and I get the "this file is protected message. I already tried to unprotect, it was not protected in the first place, and it will not let me do it.
Also if you use the page tab on the left it will not let you delete a page.
Can anyone help?
Thanks,
Dennis

Modify the output file created by F110

hi everybody
I have to modify the output file (in text format) created by tcode F110.
I have looked in the program rffous_t but could not see where I have to actually change the layout of the display of the fields
can anybody help me out in this issue?
thanks a lot for your help
prema

Hi vinraaj
thanks a lot for the information
One more question, if i have to modify the formats of the file, do i have to modify the event module for payment medium formats
theres an event module FI_PAYMEDIUM_ACH_20, I have to change the codes, how do i proceed?
do i make a copy of the event module and then modify the codes or there is other ways to do it
thanks a lot for your help

Import Package problems and error in the Java file created in runtime

got the following error message when i try to load the JSP file given below (FlightSearch.jsp). Given also below the JAVA files (flightsearch$jsp.java) created by the compiler.
Thanks for your help
Susan
Error message
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:320: 'catch' without 'try'.
} catch (Throwable t) {
^
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:328: 'try' without 'catch' or 'finally'.
^
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:328: '}' expected.
^
3 errors, 1 warning
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:285)
at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:548)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:176)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:188)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:381)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:536)
FlightSearch.jsp
<%@page import="java.util.*" errorPage="ErrorHandler.jsp"%>
<%@page import="com.client.entity.Flight"%>
<%@page import="com.client.wsclient.FlightServiceClient"%>
<H3>Available Flight List</H3>
 We have found the following Available flight(s) : 
<table border="0" cellpadding="0" cellspacing="0" width="100">
<tr>
<td width="10%" bgcolor="#808080">Flight Company</td>
<td width="10%" bgcolor="#808080">Flight Number</td>
<td width="10%" bgcolor="#808080">Depart From</td>
<td width="10%" bgcolor="#808080">Arrive</td>
<td width="10%" bgcolor="#808080">Departure Date</td>
<td width="10%" bgcolor="#808080">Departure Time</td>
<td width="10%" bgcolor="#808080">Arrival Date</td>
<td width="10%" bgcolor="#808080">Arrival Time</td>
<td width="10%" bgcolor="#808080">Adult Fare</td>
<td width="10%" bgcolor="#808080">Child Fare</td>
</tr>
<%
//Get the search information
String des = request.getParameter("DFrom");
String arr = request.getParameter("DTo");
String fy = request.getParameter(FYear.value);
String fm = request.getParameter(FMonth.value);
String fd = request.getParameter(FDay.value);
String f1 = fy + "-" + fm;
String FDat = f1 + "-" + fd;
String ty = request.getParameter(TYear.value);
String tm = request.getParameter(TMonth.value);
String td = request.getParameter(TDay.value);
String t1 = ty + "-" + tm;
String TDat = t1 + "-" + td;
String type;
if( request.getParameter(type[0].checked))
type = "Return";
else
{ type = "OneWay";
String clas;
if(request.getParameter(clas[0].checked))
{clas = "ECO";
else
{clas = "BUSS";}
String adult = request.getParameter(Adult.value);
String child = request.getParameter(Child.value);
//Get the server Flight Search Service URL
// ServerFlightSearchBO SFSBO = new ServerFlightSearchBO();
// ServerFlightSearch FlightSearch = SFSBO.getFlightSearchURL();
// FlightSearchServiceClient FSearchServiceClient = new FlightSearchServiceClient
String ServerFlightServiceURL = "http://localhost:7080/AServer/services/FlightService";
//Find available Flight
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(des, arr, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
%>
<tr>
<td width= "10%"><%=flt.getFlightComp()%></td>
<td width= "10%"><%=flt.getFlightNum()%></td>
<td width= "10%"><%=flt.getDestination()%></td>
<td width= "10%"><%=flt.getArrive()%></td>
<td width= "10%"><%=flt.getFrDate()%></td>
<td width= "10%"><%=flt.getFlightDptTm()%></td>
<td width= "10%"><%=flt.getToDate()%></td>
<td width= "10%"><%=flt.getFlightArrTm()%></td>
<%
int adt, chld;
int far_A, tot_A, far_C, tot_C;
adt = Integer.parseInt(adult);
far_A = flt.getAdultFr();
tot_A = adt * far_A;
chld = Integer.parseInt(child);
far_C = flt.getChildFr();
tot_C = chld * far_C;
%>
<td width= "10%"><%=tot_A%></td>
<td width= "10%"><%=tot_C%></td>
</tr>
<%
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
%>
<tr>
<td width= "10%"><%=flt.getFlightComp()%></td>
<td width= "10%"><%=flt.getFlightNum()%></td>
<td width= "10%"><%=flt.getFlightDpt()%></td>
<td width= "10%"><%=flt.getFlightArr()%></td>
<td width= "10%"><%=flt.getFlightDptDt()%></td>
<td width= "10%"><%=flt.getFlightDptTm()%></td>
<td width= "10%"><%=flt.getFlightArrDt()%></td>
<td width= "10%"><%=flt.getFlightArrTm()%></td>
<%
int adlt, chd;
int fare_A, totA, fare_C, totC;
adlt = Integer.parseInt(adult);
fare_A = flt.getAdultFr();
totA = adlt * fare_A;
chd = Integer.parseInt(child);
fare_C = flt.getChildFr();
totC = chd * fare_C;
%>
<td width= "10%"><%=totA%></td>
<td width= "10%"><%=totC%></td>
</tr>
<%
%>
</table>
flightsearch$jsp.java
package org.apache.jsp;
import java.util.*;
import com.client.entity.Flight;
import com.client.wsclient.FlightServiceClient;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.jsp.*;
import org.apache.jasper.runtime.*;
public class flightsearch$jsp extends HttpJspBase {
static {
public flightsearch$jsp( ) {
private static boolean jspxinited = false;
public final void jspxinit() throws org.apache.jasper.runtime.JspException {
public void _jspService(HttpServletRequest request, HttpServletResponse response)
throws java.io.IOException, ServletException {
JspFactory _jspxFactory = null;
PageContext pageContext = null;
HttpSession session = null;
ServletContext application = null;
ServletConfig config = null;
JspWriter out = null;
Object page = this;
String _value = null;
try {
if (_jspx_inited == false) {
synchronized (this) {
if (_jspx_inited == false) {
jspxinit();
jspxinited = true;
_jspxFactory = JspFactory.getDefaultFactory();
response.setContentType("text/html;ISO-8859-1");
pageContext = _jspxFactory.getPageContext(this, request, response,
"ErrorHandler.jsp", true, 8192, true);
application = pageContext.getServletContext();
config = pageContext.getServletConfig();
session = pageContext.getSession();
out = pageContext.getOut();
// HTML // begin [file="/client/flightsearch.jsp";from=(0,59);to=(1,0)]
out.write("\r\n");
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(1,43);to=(2,0)]
out.write("\r\n");
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(2,58);to=(19,0)]
out.write("\r\n\r\n<H3>Available Flight List</H3>\r\n We have found the following Available flight(s) : \r\n<table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"100\">\r\n <tr>\r\n <td width=\"10%\" bgcolor=\"#808080\">Flight Company</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Flight Number</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Depart From</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrive</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Departure Date</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Departure Time</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrival Date</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrival Time</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Adult Fare</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Child Fare</td>\r\n </tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(19,2);to=(66,0)]
//Get the search information
String des = request.getParameter("DFrom");
String arr = request.getParameter("DTo");
String fy = request.getParameter(FYear.value);
String fm = request.getParameter(FMonth.value);
String fd = request.getParameter(FDay.value);
String f1 = fy + "-" + fm;
String FDat = f1 + "-" + fd;
String ty = request.getParameter(TYear.value);
String tm = request.getParameter(TMonth.value);
String td = request.getParameter(TDay.value);
String t1 = ty + "-" + tm;
String TDat = t1 + "-" + td;
String type;
if( request.getParameter(type[0].checked))
type = "Return";
else
{ type = "OneWay";
String clas;
if(request.getParameter(clas[0].checked))
{clas = "ECO";
else
{clas = "BUSS";}
String adult = request.getParameter(Adult.value);
String child = request.getParameter(Child.value);
//Get the server Flight Search Service URL
// ServerFlightSearchBO SFSBO = new ServerFlightSearchBO();
// ServerFlightSearch FlightSearch = SFSBO.getFlightSearchURL();
// FlightSearchServiceClient FSearchServiceClient = new FlightSearchServiceClient
String ServerFlightServiceURL = "http://localhost:7080/AServer/services/FlightService";
//Find available Flight
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(des, arr, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(66,2);to=(68,18)]
out.write("\r\n<tr>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(68,21);to=(68,40)]
out.print(flt.getFlightComp());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(68,42);to=(69,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(69,21);to=(69,39)]
out.print(flt.getFlightNum());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(69,41);to=(70,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(70,21);to=(70,41)]
out.print(flt.getDestination());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(70,43);to=(71,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(71,21);to=(71,36)]
out.print(flt.getArrive());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(71,38);to=(72,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(72,21);to=(72,36)]
out.print(flt.getFrDate());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(72,38);to=(73,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(73,21);to=(73,41)]
out.print(flt.getFlightDptTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(73,43);to=(74,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(74,21);to=(74,36)]
out.print(flt.getToDate());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(74,38);to=(75,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(75,21);to=(75,41)]
out.print(flt.getFlightArrTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(75,43);to=(76,1)]
out.write("</td>\r\n ");
// end
// begin [file="/client/flightsearch.jsp";from=(76,3);to=(87,1)]
int adt, chld;
int far_A, tot_A, far_C, tot_C;
adt = Integer.parseInt(adult);
far_A = flt.getAdultFr();
tot_A = adt * far_A;
chld = Integer.parseInt(child);
far_C = flt.getChildFr();
tot_C = chld * far_C;
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(87,3);to=(88,18)]
out.write("\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(88,21);to=(88,26)]
out.print(tot_A);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(88,28);to=(89,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(89,21);to=(89,26)]
out.print(tot_C);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(89,28);to=(91,0)]
out.write("</td>\r\n</tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(91,2);to=(100,0)]
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(100,2);to=(102,18)]
out.write("\r\n<tr>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(102,21);to=(102,40)]
out.print(flt.getFlightComp());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(102,42);to=(103,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(103,21);to=(103,39)]
out.print(flt.getFlightNum());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(103,41);to=(104,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(104,21);to=(104,39)]
out.print(flt.getFlightDpt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(104,41);to=(105,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(105,21);to=(105,39)]
out.print(flt.getFlightArr());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(105,41);to=(106,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(106,21);to=(106,41)]
out.print(flt.getFlightDptDt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(106,43);to=(107,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(107,21);to=(107,41)]
out.print(flt.getFlightDptTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(107,43);to=(108,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(108,21);to=(108,41)]
out.print(flt.getFlightArrDt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(108,43);to=(109,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(109,21);to=(109,41)]
out.print(flt.getFlightArrTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(109,43);to=(110,1)]
out.write("</td>\r\n ");
// end
// begin [file="/client/flightsearch.jsp";from=(110,3);to=(120,1)]
int adlt, chd;
int fare_A, totA, fare_C, totC;
adlt = Integer.parseInt(adult);
fare_A = flt.getAdultFr();
totA = adlt * fare_A;
chd = Integer.parseInt(child);
fare_C = flt.getChildFr();
totC = chd * fare_C;
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(120,3);to=(121,18)]
out.write("\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(121,21);to=(121,25)]
out.print(totA);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(121,27);to=(122,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(122,21);to=(122,25)]
out.print(totC);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(122,27);to=(124,0)]
out.write("</td>\r\n</tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(124,2);to=(126,0)]
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(126,2);to=(127,8)]
out.write("\r\n</table>");
// end
} catch (Throwable t) {
if (out != null && out.getBufferSize() != 0)
out.clearBuffer();
if (pageContext != null) pageContext.handlePageException(t);
} finally {
if (_jspxFactory != null) _jspxFactory.releasePageContext(pageContext);

You are missing a closing parens. You have :
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){Which opens two parens but you only have one closing parens
</tr>
<%
%>
</table>

Can Linux Fotran read the unformatted files created by Fortan in Solaris?

If I install SUN studio in Linux server (x86) can I read the Fotran unformatted files created by Sun Fortran compiler in Solaris (Sparc)? Thanks.

Please see the answer at:
[http://forums.sun.com/thread.jspa?threadID=5442475|http://forums.sun.com/thread.jspa?threadID=5442475]
Edited by: CompilerGeek on Jun 17, 2010 11:08 AM
Edited by: CompilerGeek on Jun 17, 2010 11:09 AM

What are the temporary files created by Tuxedo 8.1 in /tmp

Hello there,
I've noticed that Tuxedo is storing files into /tmp/tx000XCi002W08 !!??
Does anybody know when and why tuxedo is doing this ?
By the way is it possible to move the location of these temporary files somewhere else ?
My config infos:
- Tuxedo 8.1
- OS AIX 5.3TL6
- Domain is run using MP mode
- Domain is made of two LMIDs
Edited by [email protected] at 11/27/2007 9:03 AM

Herbert,
The temporary files stored in directories similar to /tmp/tx000XCi002W08 are
used to lock the Tuxedo VTOC (Virtual Table Of Contents) when it is updated.
This occurs when a TUXCONFIG, BDMCONFIG, or TLOG file is created, but does
not occur when the MIB updates one of these files or when a TLOG record is
written. These lock files are used to protect against two process creating,
destroying, or modifying the file list in a particular VTOC at the same
time.
As long as your application does not continually vary the location of the
TUXCONFIG, BDMCONFIG, or TLOG files, there should be only a small number of
such directories under /tmp. When Tuxedo is shut down, any such directories
can be safely removed.
Although the location of most temporary files in Tuxedo can be changed using
the TMPDIR environment variable, the location of the VTOC lock files cannot
be changed, since different processes could have different values of TMPDIR
Ed
<herbert koelman> wrote in message news:[email protected]..
Hello there,
I've noticed that Tuxedo is storing files into /tmp/tx000XCi002W08 !!??
Does anybody know when and why tuxedo is doing this ?
By the way is it possible to move the location of these temporary files
somewhere else ?
My config infos:
- Tuxedo 8.1
- OS AIX 5.3TL6
- Domain is run using MP mode
- Domain is made of two LMIDs
Edited by [email protected] at 11/27/2007 9:03 AM

Cannot open the .ecs file created already

Hi,
I created an ecs file for the x12 856 5010 version and saved it.later when i try to open it I get the following error
Ecs file corruption.Not enough room in the output error.what is this error message.How do i resolve this
Thanks for you help,
souji

Souji,
Not sure but issue may be related to OS or dot net. Can you try to open the same file in any other machine which has B2B Doc Editor installed? You may also search on Google for "Simple methods to deal with Not Enough Room In Buffer To errors"
Regards,
Anuj

Automatically Tagged the PDF files Created from Templates

I have some PDF templates which have texts, fields, table, or lines in it. They are made accessible by tagging manually and creating special reading order when press tab through the pages.
After run a program which uses Adobe FdfApp and FdfDoc object to add data in the fields of the templates and save as an fdf file, then use CAcroAVDoc / CAcroPDDoc object convert fdf file to a PDF file. This PDF file will keep special reading order when press tab through the pages, but no Tag. (Tagged PDF: is No).
Is there a way can keep the tag of PDF templates, after run FdfApp? If not, how automatically to create the PDF file tag or import tag from its template?

No, the process of importing an FDF into a PDF does not maintain any tagging.

What are the log files created while running a mapping?

Hi Sasi , I have a doubt who actually generates the " Log Events ". Is it the Log Manager or Application services ?

Hi Anitha, The Integration service will be generate two logs when the mapping runs 1) Session log -- Has the details of the task ,session errors and load statistics..2) Workflow log -- Has the details of the workflow processing, and workflow errors.. The workflow log will be generated when the workflow started and the session log will be generated once the session intiated.For more detail Please refer the infa help docs... Normally the services will generate log ex: IS and RS will log their activity... The below process will happen the when the workflow inititated..[Copied fropm infa help docs] 1.#The Integration Service writes binary log files on the node. It sends information about the sessions and workflows to the Log Manager.2.#The Log Manager stores information about workflow and session logs in the domain configuration database. The domain configuration database stores information such as the path to the log file location, the node that contains the log, and the Integration Service that created the log.3.#When you view a session or workflow in the Log Events window, the Log Manager retrieves the information from the domain configuration database to determine the location of the session or workflow logs.4.#The Log Manager dispatches a Log Agent to retrieve the log events on each node to display in the Log Events window. ThanksSasiramesh

Error in opening the PDF file created from the smart form output.

Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RK

Check the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name      TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize     TYPE i,
w_lines_txt    TYPE i,
w_lines_bin    TYPE i.
DATA:
wa_ctrlop   TYPE ssfctrlop,
wa_outopt   TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer   TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
    mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = 'Z195_TEST'
IMPORTING
    fm_name            = w_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
    control_parameters = wa_ctrlop
    output_options     = wa_outopt
    user_settings      = 'X'
IMPORTING
    job_output_info    = t_otfdata
EXCEPTIONS
    formatting_error   = 1
    internal_error     = 2
    send_error         = 3
    user_canceled      = 4
    OTHERS             = 5.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
    format                = 'PDF'
    max_linewidth         = 132
IMPORTING
    bin_filesize          = w_bin_filesize
TABLES
    otf                   = t_otf
    lines                 = t_pdf_tab
EXCEPTIONS
    err_max_linewidth     = 1
    err_format            = 2
    err_conv_not_possible = 3
    err_bad_otf           = 4
    OTHERS                = 5.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
            '-' "w_stat_descr w_action_desc
       INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
*                           separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = wa_doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = t_objpack
    object_header              = wa_objhead
    contents_bin               = t_objbin
    contents_txt               = t_objtxt
    receivers                  = t_reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
IF sy-subrc EQ 0.
ENDIF.

Rewrite the vhd file created by win7 image creation

Similar Messages

Maybe you are looking for