Rewriting UCM Webservices by-default out put

Hi,
As we know when we create custom webservices in Oracle UCM, the output of such webservices is written with standard <idc> tag, enveloped with Soap header.
My requirement is to rewrite this webservice output by removing standard <idc> tag and put our required <tag>
Any help in this will be really appreciated. This is very critical to project and urgent.
Thanks,
Sudeep

Hi Ram
In flow logic.
PBO
module screen_modify.
IN main program
module screen_modify.
loop at screen.
if p_cb = space.
if screen-name = <Name of your screen field>.
screen-input = 0.
screen-output = 0.
modify screen.
endif.
endif.
endloop.
endmodule.
P_cb is the checkbox.

Similar Messages

  • How to get default lay out set in my ALV out put.

    I need to have default layout in my ALV output.
    My functional consultant idea was to make sure they have an ALV variant selected. 
    When he first run the program, how will need to  get a "/DEFAULT" variant created.
    How can I do that ?
    Initialization - For ALV variant
    INITIALIZATION.
      ws_repid = sy-repid.
      g_save  = 'A'.
      CLEAR g_variant.
      g_variant-report = ws_repid.
    Get default variant.
      gx_variant  = g_variant.
      gx_variant = g_variant.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = g_save
        CHANGING
          cs_variant = gx_variant
        EXCEPTIONS
          not_found  = 2.
      IF sy-subrc = 0.
        p_vari = gx_variant-variant.
      ENDIF.
    &--F4 HELP - FOR ALV VARIANT GET--
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
          EXPORTING
            is_variant = g_variant
            i_save     = g_save
          IMPORTING
            e_exit     = g_exit
            es_variant = gx_variant
          EXCEPTIONS
            not_found  = 2.
        IF sy-subrc = 2.
          MESSAGE ID sy-msgid TYPE 'S'      NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          IF g_exit = space.
            p_vari = gx_variant-variant.
          ENDIF.
       ENDIF.
    &--AT SELECTION-SCREEN.- For ALV Variant--
    AT SELECTION-SCREEN.
    *Getting variant Existence
      PERFORM get_exist_variant.
    *&      Form  GET_EXIST_VARIANT                                        *
          text                                                           *
    FORM get_exist_variant .
      IF NOT p_vari IS INITIAL.
        MOVE g_variant TO gx_variant.
        MOVE p_vari TO gx_variant-variant.
        CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
          EXPORTING
            i_save     = g_save
          CHANGING
            cs_variant = gx_variant.
        g_variant = gx_variant.
      ELSE.
        CLEAR g_variant.
        g_variant-report = ws_repid.
      ENDIF.
    ENDFORM.                    " GET_EXIST_VARIANT
    *&      Form  alv_display                                              *
    This subroutine is to display the out put in ALV.                    *
    FORM alv_display .
    Local data
      DATA: y_x          LIKE boole  VALUE 'X'.
      DATA: lh_index     LIKE lf_fieldcat-col_pos.
    For variant
    DATA: ws_repid LIKE sy-repid,
          g_save TYPE c VALUE 'A',
          g_exit TYPE c,
          g_variant LIKE disvariant,
          gx_variant LIKE disvariant.
      For 1st field.( RPT_LOC )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'RPT_LOC'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'RPT_LOC'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    For 2nd field.( BAL_XMIT )
        CLEAR lf_fieldcat.
        lf_fieldcat-fieldname = 'BAL_XMIT'.
        lf_fieldcat-tabname = 'GT_ZGXMIT_L'.
        lf_fieldcat-ref_tabname = 'ZGXMIT'.
        lf_fieldcat-ref_fieldname = 'BAL_XMIT'.
        lh_index = lh_index + 1.
        lf_fieldcat-col_pos = lh_index.
        lf_fieldcat-key = y_x.
        lf_fieldcat-no_sum = y_x.
        APPEND lf_fieldcat TO lt_fieldcat.
    4,5,....fields appening
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program                = ws_repid
          I_CALLBACK_PF_STATUS_SET          = ' '
           i_callback_user_command           = 'USER_COMMAND'
          I_CALLBACK_TOP_OF_PAGE            = ' '
          I_STRUCTURE_NAME                  =
          I_BACKGROUND_ID                   = ' '
          I_GRID_TITLE                      =
          I_GRID_SETTINGS                   =
          IS_LAYOUT                         = v_alv_layout
           it_fieldcat                       = lt_fieldcat
          IT_SORT                           =
          IT_FILTER                         =
          IS_SEL_HIDE                       =
          I_DEFAULT                         = 'X'
           i_save                            = 'A'
          IS_VARIANT                        =
           it_events                         = events[]
          IT_EVENT_EXIT                     =
          IS_PRINT                          =
          IS_REPREP_ID                      =
           TABLES
                t_outtab                 = gt_zgxmit_l
           EXCEPTIONS
                program_error            = 1
                OTHERS                   = 2.
        IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDFORM.                    " alv_display

    Hello SAm,
    U have to set like   DATA: IT_VARIANT LIKE DISVARIANT,
            G_S_SORT  LIKE LINE OF IT_SORT.
      DATA : G_R_DISP_VARIANT TYPE DISVARIANT.
      SORT G_T_OUTTAB BY PSPID POSID.
      CLEAR: G_R_DISP_VARIANT.
    For storing the variant layout
      IT_VARIANT-REPORT  = SY-REPID.
      IF NOT P_VARIAN IS INITIAL.
        G_R_DISP_VARIANT-VARIANT = P_VARIAN.
      ELSE.
        IT_VARIANT-VARIANT = '/Z48M'.
      ENDIF.
      CLEAR G_T_OUTTAB.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM = IT_VARIANT-REPORT
                I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
                IT_FIELDCAT        = IT_FIELDCAT
                I_SAVE             = 'A'
                IS_VARIANT         = IT_VARIANT
               IS_LAYOUT          = IT_LAYOUT
                IT_SORT            = IT_SORT[]
           TABLES
                T_OUTTAB           = G_T_OUTTAB
           EXCEPTIONS
                PROGRAM_ERROR      = 1
                OTHERS             = 2.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    If u want F4 help in the selection screen then do like this.
    SELECTION-SCREEN BEGIN OF BLOCK VARIANT WITH FRAME TITLE TEXT-013.
    PARAMETERS:  P_VARIAN LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
    SELECTION-SCREEN END OF BLOCK VARIANT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARIAN.
      PERFORM SHOW_EXISTING_DISPLAY_VARIANTS.
    FORM SHOW_EXISTING_DISPLAY_VARIANTS.
      DATA: G_R_DISP_VARIANT TYPE DISVARIANT.
      G_R_DISP_VARIANT-REPORT = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
           EXPORTING
                IS_VARIANT    = G_R_DISP_VARIANT
                I_SAVE        = 'A'
           IMPORTING
                ES_VARIANT    = G_R_DISP_VARIANT
           EXCEPTIONS
                NOT_FOUND     = 1
                PROGRAM_ERROR = 2
                OTHERS        = 3.
      IF SY-SUBRC = 0.
        P_VARIAN = G_R_DISP_VARIANT-VARIANT.
      ENDIF.
    ENDFORM.                               " SHOW_EXISTING_DISPLAY_VARIANTS
    If useful reward.
    Vasanth

  • Defaulting the Out put type in out put

    Hi All,
    I have an issue in output- I am having two out put types say AA00 & BB00 for say order confirmation and order acknowledgement. When I am issuing out put for print I am getting both the condition option but not able to select? I want to make the one of the condition as default condition, How can I do it?
    Your help will be rewarded.
    Manoj

    Hey,
    Check the Tcode V/43 where you can maintain the output Determination procedure and the default output type.
    Regards,
    Ajai.
    Don't forget to reward points if useful.

  • XML PUBLISHER report in Excel out put problem

    Hi Experts,
    I have developed one XML report which output type is EXCEL in Oracle Application.
    I am getting some -ve value in the report so I need to do the trailing sign
    Menace for example I got a value -8645 I need to display the value like (8645).
    This functionality is working in PDF output but in EXCEL out put it is not working.
    Could any body please help me on this..
    Its Urgent .
    Thanks in Advance.

    Check this metalink notes, did you got any error..?
    Note: 364547.1 - Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364547.1
    Note: 359875.1 - Cannot View Xml Publisher Report Output In Excel Format
    Note: 358296.1 - How To Produce Requests In Formats Of HTML, RTF, and Excel From XML Publisher
    Note: 850685.1 - Wrong Output Format In Xml Publisher Output
    Note: 727031.1 - XML Publisher Requests Always Get Defaulted to Output Format as PDF Whatever the Template Type is Set To
    Note: 337343.1 - Unable to View Excel Output File Created by XML Publisher
    Note: 401328.1 - Default Layout Format for XML Publisher Concurrent Request Is Always PDF
    Re: XML Publisher Server on EBS 11.5.10.2

  • MRP Out Put  Schedule lines date format to month

    Hi Friends,
    I am working on SAP4.7 Version.
    I have maintained all the relavent MRP datas in material master.
    Like MRP type - PD,
    Lot Size- MB ( Monthly Lot size).
    I have created planned independent requirement in MD61 monthly wise for that material.
    I have given Schedule agreement number in Source in List with MRP indicator - 2.
    I am running MRP for a material with MD02 with MRP parameter Delivery schedules -3 (Schedule lines) .
    The MRP running succesfully and creating delivery Lines with delivery dates.
    But the requirement by the client is..
    The delivery lines should be generated in month wise.
    How to convert the schedule lines generated in day format to Month format in MRP run out put?
    While creating schedule lines with ME38. we have option to select the day format / month format/ week wise?
    But the MRP out put always generated in date wise?
    Any one knows what changes i should make?
    Guide me ..
    Thanks & Best Regards
    Giri

    Hai Boss
              Can you throw some light , how you set default mrp indicator month wise with the help of ABAPER.
    My client requirement also same like you. Yours is month, mine is week. Pl help me out.
    regards
    ssp

  • Payment Medium creation Out put ?

    Hi Experts
    When ever i run the payment proposal with the payment medium option also it is generating the DME file in the spool with out the immediate out put.
    It used to create the DME file generation directly with out this issue before.
    I went to User defaults in SU3 and tick marked the option Out put Immediately.
    Then also the message is coming up.
    Please let me know how to fix this part.
    Thanks
    Meenakshi.N

    Hello
    Sometimes even when you deactivate in open selection, the authorisation precede the output.
    Please check with BASIS for deactivation to your profile.
    Reg
    suresh

  • I wish to generate reports from the database an out put it but i need to enter a date from and to ina  html input box

    i wish to generate reports from the database an out put it
    but i need to enter a date from and to ina html input box
    in the input box a data of range will be input from a start
    to latest
    latest being the default as today's date.
    any help tips snipplets, concepts , turot=rails.
    thanks

    easycfm.com has tutorials for people who are brand new.
    If you don't know much about sql, I have heard good things
    about the book, Teach Yourself SQL in 10 Minutes by Ben
    Forta.

  • Invoice out put types

    Hi All
    We have TWO invoice out put types  ( ZLD1,& ZLD2) for invoice printing.
    when we use VF03 ------> issue output
    it is default showing only ZLD1, Manualy we have to Add ZLD2.
    is possible to set ZLD2 also in autoamticaly....
    RGds
    Pramod

    VF02, enter the invoice number, press enter
    press the "I" button
    If I double click on the first output type RD00, I will have this
    If I click on the ACCESS 06 (output found)
    I have the exact line of the VV31 trans 
    Fred

  • Sharepoint online multiline list colomn not rendering HTML out put

    Hi 
    I have list with multi line column with having multimedia options. my problem is i have created view and edited XSL  to format it. also i have added "escape out put =yes" for the column but no luck still column is rendering as HTML Tags witch
    is not rendering HTML formats in UI
    Following is my code for List view any help greatly appreciate.. 
    regards
    Radika
    <%@ Page language="C#" MasterPageFile="~masterurl/default.master"    Inherits="Microsoft.SharePoint.WebPartPages.WebPartPage,Microsoft.SharePoint,Version=16.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" meta:progid="SharePoint.WebPartPage.Document"
    meta:webpartpageexpansion="full"  %>
    <%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="Utilities"
    Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Import Namespace="Microsoft.SharePoint" %> <%@ Assembly Name="Microsoft.Web.CommandUI,
    Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %> <%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c" %>
    <%@ Register Tagprefix="ApplicationPages" Namespace="Microsoft.SharePoint.ApplicationPages.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
    <asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
    <SharePoint:ListProperty Property="TitleOrFolder" runat="server"/> - 
    <SharePoint:ListProperty Property="CurrentViewTitle" runat="server"/></asp:Content>
    <asp:content contentplaceholderid="PlaceHolderAdditionalPageHead" runat="server">
    <SharePoint:RssLink runat="server"/>
    </asp:content>
    <asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server">
    <SharePoint:ViewIcon Width="145" Height="54" runat="server"/></asp:Content>
    <asp:Content ContentPlaceHolderId="PlaceHolderLeftActions" runat="server">
    <SharePoint:RecentChangesMenu runat="server" id="RecentChanges"/>
    <SharePoint:ModifySettingsLink runat="server"/>
    </asp:Content>
    <asp:Content ContentPlaceHolderId ="PlaceHolderBodyLeftBorder" runat="server">
    <div height="100%" class="ms-pagemargin"><img src="/_layouts/15/images/blank.gif?rev=37" width='6' height='1' alt="" data-accessibility-nocheck="true"/></div>
    </asp:Content>
    <asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
    <WebPartPages:WebPartZone runat="server" FrameType="None" ID="Main" Title="loc:Main"><ZoneTemplate>
    <WebPartPages:XsltListViewWebPart runat="server" ViewFlag="" ViewSelectorFetchAsync="False" InplaceSearchEnabled="True" ServerRender="False" ClientRender="False"
    InitialAsyncDataFetch="False" WebId="00000000-0000-0000-0000-000000000000" IsClientRender="False" GhostedXslLink="main.xsl" ViewGuid="{D63D68ED-17D1-4CC9-BCF6-20DFED0FB269}" EnableOriginalValue="False"
    DisplayName="NewsDisplay" ViewContentTypeId="0x" ListName="{17179938-EFC8-4DFE-92E9-CDE296D46919}" ListId="17179938-efc8-4dfe-92e9-cde296d46919" PageSize="-1" UseSQLDataSourcePaging="True" DataSourceID=""
    ShowWithSampleData="False" AsyncRefresh="False" ManualRefresh="False" AutoRefresh="False" AutoRefreshInterval="60" Title="CT_RSSFeeds" FrameType="Default" SuppressWebPartChrome="False"
    Description="" IsIncluded="True" PartOrder="2" FrameState="Normal" AllowRemove="True" AllowZoneChange="True" AllowMinimize="True" AllowConnect="True" AllowEdit="True"
    AllowHide="True" IsVisible="True" TitleUrl="/sites/EFLDEV/Lists/CT_RSSFeeds" DetailLink="/sites/EFLDEV/Lists/CT_RSSFeeds" HelpLink="" HelpMode="Modeless" Dir="Default" PartImageSmall=""
    MissingAssembly="Cannot import this Web Part." PartImageLarge="" IsIncludedFilter="" ExportControlledProperties="False" ConnectionID="00000000-0000-0000-0000-000000000000" ID="g_d63d68ed_17d1_4cc9_bcf6_20dfed0fb269"
    ExportMode="NonSensitiveData" __MarkupType="vsattributemarkup" __WebPartId="{D63D68ED-17D1-4CC9-BCF6-20DFED0FB269}" __AllowXSLTEditing="true" __designer:CustomXsl="Fldtypes_mswhTitle.xsl;fldtypes_Ratings.xsl"
    WebPart="true" Height="" Width=""><ParameterBindings>
    <ParameterBinding Name="dvt_sortdir" Location="Postback;Connection"/>
    <ParameterBinding Name="dvt_sortfield" Location="Postback;Connection"/>
    <ParameterBinding Name="dvt_startposition" Location="Postback" DefaultValue=""/>
    <ParameterBinding Name="dvt_firstrow" Location="Postback;Connection"/>
    <ParameterBinding Name="OpenMenuKeyAccessible" Location="Resource(wss,OpenMenuKeyAccessible)" />
    <ParameterBinding Name="open_menu" Location="Resource(wss,open_menu)" />
    <ParameterBinding Name="select_deselect_all" Location="Resource(wss,select_deselect_all)" />
    <ParameterBinding Name="idPresEnabled" Location="Resource(wss,idPresEnabled)" />
    <ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
    <ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
    </ParameterBindings>
    <Xsl>
    <xsl:stylesheet xmlns:x="http://www.w3.org/2001/XMLSchema" xmlns:d="http://schemas.microsoft.com/sharepoint/dsp" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime"
    xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt"
    xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal">     <xsl:output method="html" indent="no"/>     <xsl:decimal-format NaN=""/>  
      <xsl:param name="dvt_apos">&apos;</xsl:param>     <xsl:variable name="dvt_1_automode">0</xsl:variable>     <xsl:template match="/" xmlns:x="http://www.w3.org/2001/XMLSchema"
    xmlns:d="http://schemas.microsoft.com/sharepoint/dsp" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:SharePoint="Microsoft.SharePoint.WebControls">
            <xsl:call-template name="dvt_1"/>     </xsl:template>     
    <xsl:template name="dvt_1" ddwrt:ghost="" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:ddwrt2="urn:frontpage:internal">      
      <xsl:variable name="Rows" select="/dsQueryResponse/Rows/Row" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js"></script>      
         <link rel="stylesheet" href="/sites/EFLDEV/Utillity/ES/page.css" type="text/css" media="screen" /> <link rel="stylesheet" href="/sites/EFLDEV/Utillity/ES/slider.css" type="text/css"
    media="screen" /> <script type="text/javascript" src="/sites/EFLDEV/Utillity/ES/jquery.easing.1.2.js"></script> <script src="/sites/EFLDEV/Utillity/ES/jquery.anythingslider.js" type="text/javascript"
    charset="utf-8"></script> <script type="text/javascript">         function formatText(index, panel) {           return index + &quot;&quot;;        
    }         $(function () {             $(&apos;.anythingSlider&apos;).anythingSlider({                 easing: &quot;easeInOutExpo&quot;,    
                autoPlay: true,                 delay: 3000,                 startStopped: false,                
    animationTime: 600,                 hashTags: true,                 buildNavigation: true,             pauseOnHover: true,        
    startText: &quot;Go&quot;,         stopText: &quot;Stop&quot;,     navigationFormatter: formatText             });             $(&quot;#slide-jump&quot;).click(function(){
                    $(&apos;.anythingSlider&apos;).anythingSlider(6);             });         });     </script> <div class="anythingSlider">
        <div class="wrapper">         <ul>         <xsl:call-template name="dvt_1.body">             <xsl:with-param name="Rows"
    select="$Rows" />             </xsl:call-template>         </ul>             </div>         </div>     </xsl:template>
        <xsl:template name="dvt_1.body">         <xsl:param name="Rows" />         <xsl:for-each select="$Rows">    
            <xsl:call-template name="dvt_1.rowview" />         </xsl:for-each>     </xsl:template>     
    <xsl:template name="dvt_1.rowview" ddwrt:ghost="" xmlns:ddwrt2="urn:frontpage:internal">         <li>         <div class="textSlide">
    <!-- display the item title and a link to the item --><h3><a href="/{@FileDirRef}/DispForm.aspx?ID={@ID}" title="{@ItemTitle}"><xsl:value-of select="@ItemTitle" /></a></h3> <!-- display the
    body of the item  -->    <div><xsl:value-of select="@ItemDescription" disable-output-escaping="yes" /></div>     </div>     </li></xsl:template> 
    </xsl:stylesheet></Xsl>
    <DataFields>
    </DataFields>
    <XmlDefinition>
    <View Name="{D63D68ED-17D1-4CC9-BCF6-20DFED0FB269}" Type="HTML" DisplayName="NewsDisplay" Url="/sites/EFLDEV/Lists/CT_RSSFeeds/NewsDisplay.aspx" Level="1" BaseViewID="1"
    ContentTypeID="0x" ImageUrl="/_layouts/15/images/generic.png?rev=37" >
    <Query/>
    <ViewFields>
    <FieldRef Name="LinkTitle"/>
    <FieldRef Name="ChannelID"/>
    <FieldRef Name="Tag"/>
    <FieldRef Name="Created1"/>
    <FieldRef Name="ItemTitle"/>
    <FieldRef Name="ID"/>
    <FieldRef Name="ItemDescription"/>
    </ViewFields>
    <RowLimit Paged="TRUE">30</RowLimit>
    <Aggregations Value="Off"/>
    <JSLink>clienttemplates.js</JSLink>
    <XslLink Default="TRUE">main.xsl</XslLink>
    <Toolbar Type="Standard"/>
    </View>
    </XmlDefinition>
    </WebPartPages:XsltListViewWebPart>
    </ZoneTemplate></WebPartPages:WebPartZone>
    </asp:Content>
    <asp:Content ContentPlaceHolderId="PlaceHolderPageDescription" runat="server">
    <SharePoint:ListProperty CssClass="ms-listdescription" Property="Description" runat="server"/>
    </asp:Content>
    <asp:Content ContentPlaceHolderId="PlaceHolderCalendarNavigator" runat="server">
    <SharePoint:SPCalendarNavigator id="CalendarNavigatorId" runat="server"/>
      <ApplicationPages:CalendarAggregationPanel id="AggregationPanel" runat="server"/>
    </asp:Content>

    Hi,
    In SharePoint Online 2013, we can use jQuery to convert “&lt”  to “<” and  convert “&gt” to “>”.
    The following code for your reference:
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(function () {
    $(".ms-rtestate-field").each(function(){
    var $this = $(this).find("p");
    if ($this.length>0) {
    $this.each(function(){
    $(this).html($(this).html().replace('&lt;', '<').replace('&gt;', '>'));
    </script>
    We can also use JSLink to customize the display view.
    http://code.msdn.microsoft.com/office/Client-side-rendering-JS-2ed3538a
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Out Put issue in Billing

    Hi Gurus,
    I have customized billing document out put as follows:
    1) i have maintained condition table 002 that is Sales Org/Billing document type.
    2) i have maintained condition type with Z and given appropriate name and In the overview i have maintained following details against each Tab:
        General Data tab :
               i have given access sequence as 002 that is Sales 
                                org and billing type i have clicked on Access to 
                                conditions.
         Default values tab :
             Dispatch time : 3 Send with application own transaction
             Transmission medium : Print output
             Partner function : BP bill to party
             Communication Strategy : blank
         Time tab:
             no were i have maintained  any value.
         Storage System:
             Storage Mode : printing only
             Document type: SDINVOICE
          Print:
            Print Param : Sales organization
    In Processing routines :
      in output type : i have maintained my own output type
      Application : V3
      Medium  : Print out
      Program : RLB_INVOICE
      FORM routine : Entry
      PDF/Smart form : ZLB_BIL_VATINVOICE2
    Partner function :
      i have maintained Out type
                                  Medium : print out
                                  function : BP
    In determination procedure V10000
          i have maintained my output types and i have given requirement  62 for my all out put types.
    and i have assigned this out type procedure to my billing documents.
    i have maintained condition records (VV31) for my key combination Sales org and billing type.
    But problem is after saving my billing document and posting the billing document i am not getting out put type automatically.
    Even i am not able to see any billing documents in t-code VF31 after giving necessary details.
    So pls tell me where i am wrong in config
    My second question is we have made couple of invoices proper to this config so will system pick up those invoices which are pending for print out by giving VF31.
    Please reply me on urgent basis since all the invoices are pending for print out and client is panic.
    Correct asn will get good reward.
    thanks & regards
    Srini

    Hi murali,
    thanks for your reply
    I have maintained communication for condition records
    like Output Device : ZAA3
    clicked on  Print immediately
                     release after output
    these i have maintained in condition records.
    So please tell me where else i am missing.
    thanks
    Srini

  • Mail out put for BA00

    Hi.,
            I want a mail to get triggered to the customers personal mail id when raised an order and out put is issued,I gave mail id in sold to party.And t here is external send routine also in BA00,even though i couldnt process that
    Gurus please help me
    Thanks & Regards
    Narayana
    Message was edited by:
            manam narayana

    Use the following method
    Defining Output Devices for Printing Using E-Mail
    To print using e-mail, you must specify an output device in the print window that has been specially set up for this print method. You can create the output device through the device definition.
    This definition creates an output device that sends the print data as an attachment to an e-mail. You can then open and print the print data with the appropriate program.
    ·        The access method M must be available in the device definition (transaction SPAD -> Output Devices -> Change -> Output device -> Create/Create Using Template -> HostSpoolAccMethod -> Host Spool Access Method).
    If the access method M is not available, you must first run report RSPO0075 in transaction SE38, to activate the access method. It will then be available to you in transaction SPAD.
    To do this, enter the name of the report in the Program field in transaction SE38, and choose  Execute. Select the option Add Access Method, and choose the access method M as the access method to be added.
    ·        In principle, you can use any device type that can be used in the device definition. However, you must ensure that a suitable printer or display program is available on the target system.
    For e-mail printing with device type pdf1, there must be a PDF display program available, such as Adobe Acrobat Reader, so that you can open and print the attached PDF file as required.
    Procedure
    If you want to create a device definition for printing using e-mail, follow the procedure below:
           1.      Call transaction SPAD, and choose Output Devices.
           2.      If you are not in change mode, switch to this mode by choosing Change.
           3.      You can now do the following:
    ¡        You can create a new device definition by choosing Output Device -> Create.
    ¡        You can use an existing device definition as a template.
    To do this, click the entry for the output device that is to be used as a template, and choose Output Device -> Create Using Template.
           4.      Specify the name of the output device and fill out the mandatory fields of the individual tab pages as follows:
    Tab Page
    Field
    Entry
    Additional Information
    Device Attributes
    Device Type
    (recommended) pdf1
    You can use any device type as long as an appropriate printer or viewer is available on the target host.
    Spool server
    depends on system
    Select a spool server (application server with a spool work process) from the list.
    Device Class  standard printer
    Host Spool
    Access Method
    Host Spool Access Method (operating system spooler)
    M (for mail)
    E-Mail Address
    The recipient of the e-mail is determined in three steps.
    a.      The system first checks whether the user has already entered an e-mail address in the print window that appears after the user triggers the print function. If this is the case, the system sends the e-mail to this address.
    If the user in the print window selects an output device with access method M for printing using e-mail (and for releases up to SAP Web AS 620, then chooses enter), a field appears, in which the user can enter an e-mail address if required. The length of this mail address is restricted to 50 characters.
                                b.      If no e-mail address is specified, the e-mail is sent to the address that is specified in the device definition.
    The length of this e-mail address is also restricted to 50 characters.
                                c.      If there is neither an e-mail address specified in the print window, nor in the device definition, the mail is sent to the mail address from the user profile (transaction SU01). By default, the creator of the mail is entered here.
    This function was originally developed to replace the frontend printing function that was missing up to SAP Basis 4.6 for the SAP GUI for HTML. The user should be able to send the print file to himself or herself by e-mail and to print it.
           5.      Save your entries.
    The message text of the e-mail is defined by default, however, you can change it, as described at the send of SAP Note 311037.
    For more information about printing using e-mail, see SAP Note 513352 in the SAP Service Marketplace.
    Result
    You can use the output device defined for access method M to print using e-mail. If you choose a print function such as , you can specify this output device in the following print window.

  • Out Put Type in RFQ & PO

    Hello All
    We have created NEW  output type for the RFQ & PO , We want to print the RFQ & sending mail to vendor also
    Whether in the out type in default value transmission medium for one Printout & another send external need to be maintained?
    Also after mainating the condition record only one transanossion medium will come in PO & RFQ if want to send mail then again we have to select output type in PO/ RFQ?
    Please suggest
    Thanks in advance
    Regards
    Rajesh Dalal

    Hi Rajesh,
    As i know there is no standard out put given . To do this we developed a z form and ztcode. Once an RFQ is created then  we given that  number in our zreport  and getting the print out put after we downloaded that sent to mail .Post if you need more help in this.
    Regards,
    Madhu.
    Edited by: madhurao123 on Mar 4, 2011 6:31 AM

  • OUT PUT DEVICE - PO

    HI
    Can any one guide me, how to set the out put device. IN my Ides i have LP01.. i want to assign to my printer. , how to do? pls advise

    hi
    the printer settings to be done by basis person and not by functional consultant
    To specify the printer name in the SAP R/3 client, use the su3 transaction.
    Enter su3 in the transaction name area. Click on the green check enter icon.
    The next screen is the information maintenance screen for the user. Select the Defaults tab.
    In the OutputDevice field, enter the name of the selected SAP R/3 printer to be used by this client.
    Check the Output immediately box.
    After filling in the necessary information, save the changes by clicking on the save icon (the diskette icon just to the right of the transaction box.)
    Click the up arrow icon to exit the su3 transaction.
    if the printer is insatlled then for po printing use transaction
    OMGF and add lp01 to the pur grp
    regards
    kunal

  • Is it possible to export the out put of Crystal report into text file?

    Hi All,
    Is it possible to export the out put of Crystal report into text file?

    Hi
    Yes, Go to File --> Export --> Export Report --> Under Format select TEXT & select the destination as "Disk file"(defaultly selected)
    Give the proper details as per your requirement for "Characters per inch" & "Number of lines per page" & click on 'OK"
    In "Choose Export file" window, select the destination folder & provide file name. click on "SAVE"
    Regards
    Ashwini

  • Creation of pf-status functionality in ALV out put

    Hi experts,
    i created pf-status and made one button to save the ccontents displayed in ALV grid out put.
    But i could not find that button in out put.  Is it possible to create custom functionality in ALV output.
    thank you
    regards
    vijay

    Hi Viajay,
    find the below steps to create the PF-STATUS..
    PF-Status
    1. How to set pf-status
    2. How to set pf-status excluding/including single menu items
    3. How to set pf-status excluding/including several menu items
    4. Setting PF status to the (SAP) system default
    5. How to check for pf-status
    6. Use of SY-PFKEY
    1. How to set pf-status
    set pf-status 'ZZBILSTA'.
    2. How to set pf-status excluding/including single menu items
    You can exclude menus by using exclude :
    set pf-status 'ZZBILSTA' excluding 'PST'.
    Note: Can also be used with include instead of exclude
    3. How to set pf-status excluding/including several menu items
    You have to use an internal table to store the status you wan't to ex- or include:
    DATA:     BEGIN OF I_PF_STATUS_TAB OCCURS 10,
              FCODE(4),
         END OF I_PF_STATUS_TAB.
    FORM SET_PF_STATUS_POSTER.
      REFRESH I_PF_STATUS_TAB.
      MOVE 'PST' TO I_PF_STATUS_TAB.
      APPEND I_PF_STATUS_TAB.
      MOVE 'ART' TO I_PF_STATUS_TAB.
      APPEND I_PF_STATUS_TAB.
      SET PF-STATUS 'ZZBILSTA' EXCLUDING I_PF_STATUS_TAB.
    ENDFORM.
    4. Setting PF status to the (SAP) system default
    set pf-status 'BASIC'.
    5. How to check for pf-status
    AT USER-COMMAND.
      CASE SY-UCOMM.
        WHEN 'ART'.
          PERFORM STYR_ARTSKONTI.
        WHEN 'PST'.
          PERFORM STYR_POSTER.
        WHEN 'BIL'.
          PERFORM VIS_BILAG.
    ENDCASE.
    6. Use of SY-PFKEY
    You can use the system variable sy-pfkey to retrieve the name of the current pf status
    Regards,
    Prabhudas

Maybe you are looking for