Rex file cut points are off in EXS when I reopen Logic 8

I just upgraded to Logic 8. Rex files open fine initially in the EXS until I shut down Logic. When I reopen the session, all of the cut points are randomly off. This has happened to about 15 EXS instruments I used REX files to create yesterday. I had this problem one time randomly in Logic 7, and it never happened again. Now it is happening consistently in Logic 8. Any ideas?

More information:
If I edit the cut points in the EXS and then save, the instrument saves and reopens with no problems.
If I load a .rx2 file and convert it to .exs, and then save in the EXS, the instrument reopens with the cut points off.
Any ideas? I need to be able to load recycle files and have them work.

Similar Messages

  • HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • Get error message "this "**" file cannot be attached until the files already attached are finished uploading" even when attaching 1 file

    I attached multiples .pdf files to an email. Tried to attach the next file before the previous 1 finished attaching. Got error message "this "**" file cannot be attached until the files already attached are finished uploading". Was never able to attach that 1 file to the email that I received the error message for; was able to attach subsequent files to that same email & send it. Now, I often get the same error message, even if I only attach 1 file & esp. when attaching .ai or .jpeg files. What can I do to fix this problem?

    It looks like nobody has an answer for this despite of the 80 something views!
    And here i thought Adobe admin would be monitoring the forum, but surprisingly, they don't even have the answer for this!!!

  • When i add a background image to form and it gives me such kind of issues so i have deleted the resource file in the solution explorer and then when i reopened my projectt it again gives errors of missing root element of InvalidResx.file amd of XMl.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.

    I have already go to properties then resources and try to remove resource option but it was't working.so help me by giving another technique to solve this issue.
    Hello,
    It will be more specific if you could share the screenshot of that error with us.
    In addition, if this issue is mainly related to the BackGroundimage property, you could consider using the following suggestion.
    We could click our project to expand the nodes and click "InitializeComponent()" to navigate to its desiginer code.
    Then check whether there is a line which has " Me.BackgroundImage =", remove that line and then remove the resource file with the following step.
    Project property->Resources->Switch "Files" or "Images" to see where you have setted for that image file, find it and remove it.
    Then save all your changes to see whether it's OK.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I turn on my computer the fan turns on and it is really loud and it makes the computer lag. Then I shut it and let the fan turn off and then when I reopen it, it works fine. If I completely reset my laptop to factory settings it will fix it?

    I had spilled water in my backpack and my laptop was inside of my backpack too. Will resetting the computer reset the fan so it will fix the lagging?

    If you have spilled water on your MBA, then an appointment at an Apple store should be made and have the technicians examine it.  Then you will be in a position to know what to do next.
    ciao.

  • I force shutdown my MacBook Pro and when I reopened my laptop, my files and apps are all gone.

    I force shutdown my MacBook Pro by pressing the shutdown button for a long time and when I reopened my laptop, my files and apps are all gone.
    When I reopened my laptop, it said that some files have been deleted or hidden (I don't know if it said hidden, I don't remember). my dock and wallpaper were set back to default.
    This isn't my first time force shutting my MacbookPro.
    How can I restore/recover back my stuff?
    i heard time machine restores your stuff back.
    And please don't tell me to go to apple because I have made an appointment with them but I'm still worried.
    Please if you know anything about this please tell me anything you know.
    Please help me.

    Given that you sound a nervous wreck and a neophyte in matters Mac, it would be safest that you put the Mac away, go take a chill pill, grab a bite, get some rest. Then take the Mac to its scheduled appointment with Destiny, er, the Apple Genius.
    There's a good possibility of data loss and munging around unknowing, following instructions that will probably be hard to grasp will only increase the amount of damage.

  • Flash at cut points

    I'm running FCP 5.1 on a 2.0Ghz Powermac G5. I import my PAL DVCAM rushes through a sony HVR-M10P via firewire. The rushes are shot on a sony HVR-Z1P camera.
    Everything is fine except that at some cut points I experience a brief flash of white. This does not happen all the time, only at certain cut points, and it is usually when the cut is from a bright shot to a darker shot. When I scroll through the frames, there is no "dirty" frame and everything seems in order. When I move between frames on the cut point, the flash always occurs on the first frame for a brief moment. It is not a full frame of white. Instead, it is just a flash on the frame, usually around the periphery, but it is really distracting.
    I've tried to de-interlace, compress the fields, drop either even or odd fields, but nothing seems to work. But when I darken the lighter shot, sometimes the flash is eliminated, although this does not happen all the time.
    Does anyone have any idea what is wrong or what I can do?
    G5 powermac   Mac OS X (10.4.7)  

    I've put the playhead on the very last frame and it's okay. When I advance to the next frame, that's where the flash occurs. The flash is not a frame in itself. It's just a momentary flash on the frame itself. Initially I thought it was field problem because I'm shooting on cineframe25 mode on the HVR-Z1P, but after playing around with the field dominance settings, I've kinda ruled that out.
    The only culprit I can think of now would be the monitor itself. I just came back from a presentation and my tape played fine on the client's TV.
    I'm puzzled...

  • File sizes that are twice as big in PS CC after cropping compared to cs5

    I'm getting file sizes that are twice as big when I resample an image in PS CC compared to what I was getting in cs5. Anyone know why and what I can do to correct it?

    Wrong forum.
    What file format are you saving in?
    What compression/quality setting are you using if any?
    Are you working in 8 or 16 bits?

  • Lost files in premiere are being located and importing audio only.  how can i fix this problem

    I had a situation when I was rendering a project, Adobe encountered a problem, and it had to shut down.  Upon reopening the project, I received a "media offline" notification for all of the video files that were edited prior to the shutdown.
    When locating those files, only the audio is being imported without the video.
    I need help in correcting this problem
    Thanks

    Hello,  I have also same problem,  Just when  I was editing my HD project, light went off. there after when I reopened my project many of the clipping were offline. I tried to re-link them, but video on time line went off only audio was there and in Project window I can see only audio file symbol. It was a very urgent work. As such I converted all the offline clips with video convertor to mp4 format and re-link them, I got audio as well as Video files but when I exported media for H.264 Bluray - it took six times more time to export. Anyhow., I got Blu-Ray., but it was not playing, I got message that format is not supported... Now anybody from forum can please HELP

  • My saved files have stripes when I reopen

    Hi, I use Photoshop CS5 extended version 12.0 64bit. I don't know why but some of my files I created have stripes on them when I reopen to work on them. It looks like some layers get corrupt and have horizontal stripes along the width of the image. Please help cause I'm on a deadline. Thanks.
    Fami

    First, go download and install all the updates for Photoshop.  You should be on 12.0.4.

  • Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

    What device?
    What format?
    How are you importing it?
    Can you find the external audio with Finder?
    Where is your destination file when you import it?
    Andy

  • Keeping EXS & REX Files linked and building libraries.

    Hi.
    I want to build a library of instruments from various REX files ive chopped and saved over the years.
    But i find the most frustrating thing about doing this is that all my older instruments seem to loose the reference audio file.
    I think this is becuase a REX file is converted into an .aif file with a weird name and stored in the song you are working on.
    Even if i then save the EXS file in a library it still doesnt save the reference audio.
    I wish Apple allowed EXS files to contain the reference audio but as they dont i need to find another solution.
    I dont have to use the EXS.... its just what im used to using.
    Can anyone give me some tips on how to create a library of instruments from my REX files, and save them so i never have this problem in the future?
    Thanks!

    Hi.
    I want to build a library of instruments from various REX files ive chopped and saved over the years.
    But i find the most frustrating thing about doing this is that all my older instruments seem to loose the reference audio file.
    I think this is becuase a REX file is converted into an .aif file with a weird name and stored in the song you are working on.
    Even if i then save the EXS file in a library it still doesnt save the reference audio.
    I wish Apple allowed EXS files to contain the reference audio but as they dont i need to find another solution.
    I dont have to use the EXS.... its just what im used to using.
    Can anyone give me some tips on how to create a library of instruments from my REX files, and save them so i never have this problem in the future?
    Thanks!

  • I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

    I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

    Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

  • ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

  • Elements in my IDML file are off centre

    Hello, I have a designer who sent me back an IDML file (he's on CS6, i'm on CS5). On my end about 1/3 of the pages in a 100 page document are off centre by the exact same amount.
    What's bizarre is that some of the off-centre elements are based off of a Master Page, and the Master Page is perfectly fine. Some pages that use master page elements are fine, while other pages are off centre.
    Any idea why this is happening?
    Right now i'm going through the pages one-by-one and re-arranging the page elements...

    The fact is that IDML is not a tool for collaborative workflows and this
    is just the kind of thing that can happen and why everyone should be on
    the same version.
    Bob

Maybe you are looking for

  • My 5d Mark III raw files are showing up as CRAW2 not CR2?!

    I have tried resetting my camera settings to default, formatting the CF cards, using multiple card readers...nothing is working and I can't seem to find any information on what a CRAW2 file is. I have also tried using a DNG converter to convert the f

  • Payment Sytem Unavailable

    I'm trying to purchase a monthly PS subscription after letting my previous expire.  When I get to purchase now page and click on Purchase button it says that "payment system unavailable" and to try back.  I've tried for multiple days now, facing a de

  • Show and

    Hi, we are facing some problem to hide and show command link inside the ADF table in conditional basis. we have two attrinbutes in manged bean, based on one attribute value in managed bean i need show and hide command link for each row. thanks

  • About rolled out project

    hi experts. can somebody tell me exactly what is rolled out project. and in this project what is the role of abaper.how much min, time it will take to complete the project. regards, subhasis

  • Material Reservation Through Bom

    Hi Gurus, I have a requirement that when am going to create a order i need to take material from E-BOM only and some of oil and greese i have to select from componets tab,  from components tab i dont want to select any other material, so please hlip