Rezound hangs up call when I try to get screen to turn on while in call
I am having a couple of issues that are really driving me nuts on my phone. The number 1 issue and it became an issue with the ICS upgrade is that when I am in a call, my screen goes dark, like normal, however I cannot for the life of me get back to the in call screen. The only button that does anything is the power button and when I push it, it takes me back to the in call screen and then promptly hangs the call up. Does anyone know of anything I can do to change this from happening?
The other issue and once again this started happening after the ICS upgrade, is that when I wake my phone up it arbitrarily picks a website to open to instead of opening directly to the home screen. Just infuriating!
The call issue is huge though because I am doing a lot of business calls from my phone and without a way to get my screen to turn on in call is not acceptable.
It's a proximity sensor calibration issue. Unfortunately, with a stock device, there is nothing you can do to fix it. Cap customer support and have them do a warranty exchange.
Similar Messages
-
when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
I cannot access my voice mails. I can't get to voice mail either through the phone app nor the viooice mail app. When I try I get message the "can not complete call as dialed."t Any ideas?
backpack12,
Voicemails are a vital part of having a working phone. We do suggest that you look at the contact and then the number to make sure that it is *86. If you are needing to get your voicemails until then, please dial *86.
RobinD_VZW
Follow us on twitter @VZWSupport -
I get the error ox80090318 with my itunes when i try to get itunes store please tell me what to do?
http://support.apple.com/kb/TS4123
You do this; follow the article, if unsucessful call Apple Support -
I made up an ICloud account but when I try to get my files back after a restore I couldn't get it how can I get them or is it even possible? I'm using a IPod touch version 5.0.1
Please help me, I have precious pictures that I can't download.
-
My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?
Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716) -
I created second email account ([email protected]) with a Password but when I try to get mail and enter password, it says "Sending of Password did not succeed. Mail server mail.comcast.net responded: login failed". What am I doing wrong?
Have you logged on to the webmail account using a browser and enabled either Pop or Imap forwarding for that email address?
Have you created a mail account in Thunderbird that uses the chosen webmail forwarding option?
Password - make sure caps lock is not switched - it must be the same password you use to access the webmail account.
check:
Tools > account Settings > Server Settings
username = full email address
Please post info:
In Thunderbird
Help > Troubleshooting information
click on 'copy text to clipboard'
paste info in this question
edit /remove all info on fonts and printers. -
I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help
Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.
-
Hi, I have an iPod Touch 5th generation.
I have a Windows XP computer.
I cannot update my version of iTunes.When I try, I get a message saying that the needed files are on a network resource that is not available.
This has happened before, but has been fixable, but.not by me..
Can I fix it myself? if so, how? I'd like to uninstall iTunes and reinstall it so I can update it.
thanks for any help. nanc3Try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?
Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says: “...cannot be used because it requires iTunes version 10.7 or later.” However when I try to get iTunes to update it says: “This version of iTunes (10.6.3) is the current version.” Can anyone help?
filterc-r wrote:
Thanks for your reply. My Mac is running 10.5.8: it's 4 years old. When I try to update the OS software, I'm told there are none available.
Be careful - there's a difference between update and upgrade. Your machine is saying there are no updates available, meaning no later versions of OS X 10.5 (Leopard). However, you can very likely upgrade - at least to OS X 10.6 (Snow Leopard), and possibly then to OS X 10.8 (Mountain Lion).
Updates are free, but upgrades cost a bit. That's the dirference. -
Help me Please.. I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPad3
I'm from poland.
Thx
BalbiContact iTunes Customer Service and request assistance...
Use this Link > Apple Support iTunes Store Contact -
I can log on to the Apple website to manage my account and all the information is correct, but I get “Your Apple ID has been disabled” when I try to get something from App Store on my iPhone.
You need to contact Apple Support, particularly iTunes Store support team. Cheers!
-
My mac had to have a new hard drive in its first year. Now, when I try to get the key code for office it tells me its already been used. How do i get the office I've paid for but never used?
The product key is sent to you by email as part of the purchase confirmation.
If you have lost it, log into your Microsoft account. -
My new iPad, when I try to get something from the Apple Store it tells me that My account i snot vlaid for use in the U.S.store. And to switch to the Australian store before purchasing, how do I do this? I am in Australia?
There are instructions on this page for creating an account without a credit card : http://support.apple.com/kb/HT2534
You can download a copy of the iPad manual from here : http://support.apple.com/manuals/ipad/
Maybe you are looking for
-
Filter(NULL IS NOT NULL) in Explain Plan ??
Hi All, Can someone please explain what this explain plan statement means? I see a filter(NULL IS NOT NULL) as the first statement - could not figure out why it came up so from googling. My Query Used: EXPLAIN PLAN FOR MERGE INTO summary_bysrccd USIN
-
How do I get a new copy of my installation files?
Hi, I had bought the pack and only managed to get the first disk installed,the computer harddrive failed and nothing could be retrieved.Then we got flooded and havnt been able to come across the disk pack for photoshop and elements.I now have nothi
-
What path to use to access network files from Java app running on Mac
I have a Java app running on a Mac with OS X that I'm using to check for files that exists on Windows servers within our network. Using a path like /Volumes/<Share>/ works because I've already connected to the drive using Finder. If I try to use a fu
-
How to make use of visual studio effectively
thank you for giving me this great oppurtunity to be part of this furum i will appriciate and assistance from you as regarding the efffective use of this software sent to my hotmail, thanks
-
Report with multiple calculations
I am learning reports and need some inputs on how can I handle the following report 1. One of my summary area in the report should show 5 amounts as a table view and the sixth column should be sum of the first 4 columns (I am getting those 5 values w