Rezound making a busy signal even when powered down

I have had my Rezound for about a month and have liked it; even traveled across the country with no connection problems.   Then got home to the Texas hill country and it started acting up.  We don't have very good signal here but even when in Kerrville where there is 3G this happens (but not San Angelo with 4G): my phone will be sitting there by its self and will start having a busy signal.  I mess with the volume contol on the side that usually effects the ringer volume and it is now the in-call volume that does change the loudness of the busy signal.  I can make a call out and it will temporarily stop the sound, but no one can call me while it is beeping.  I went to the Verizon office, they did a factory reset, didn't fix it; they sent me a refurbished phone, trying to set it up today it did the same thing!  Is there something going on with the tower that's causing this or the software?  This is getting frustrating!  Any help or input would really help.

    Hi KvM,
I apologize for the delay but I am here to help! You advised that your device randomly has a busy signal. Please clarify, are you on a call when you hear this busy signal? Have you recently downloaded any new applications? I look forward to hearing from you soon.
Thank you for your contribution to our community forum,
AyaniB_VZW
Follow us on twitter @VZWSupport

Similar Messages

  • My call will not end when pushing end sign even when shut down and restarted.  any ideas?

    call will not end when pushing end sign even when shut down and restarted.  any ideas?

    Sounds like a major hardware problem.
    If no change after restoring your iPhone as a new iPhone or not from your iPhone's backup, there is a hardware problem.

  • HT1310 Even when holding down the option key during the restart, I can't get the flashing file icon to go away

    I have tried numerous times to restart my macbook pro to get to the startup manager. And even when holding down the option key, it will just take me back to the flashing file with a question mark in it. If anyone can help, I'd sincerely appreciate it.

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • My phone doesnt hold it's charge and runs hot even when shut down.  what can i do to fix.

    My pone will not hold it's charge as long as it should and runs hot even when shut down.

    Shutdown all apps that may be running in the background by double clicking the home button, touch and hold an app until they all start to jiggle, then one at a a time dismiss each.  Then turn off all services you don't need, such as Bluetooth if you don't use it.
    Fully charge and see how the iPhone works, does it retain charge, run at a normal temp?  If it still is hot, etc., take it to an Apple store genius bar for testing by the techs.

  • HP Design jet 500 42-in. Ip settings reset when powered down or unplugged.

    HP designjet 500 42-in
    when configuring the ip settings on the printer via the frount panel or via webpage, settings seem as though there saved. However when powering down or up plugging the printer the IP settings reset to default.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • PRI channel busy issue , even when there are no active calls

    Hi All ,
    i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
    i already replaced that card .
    please advice

    I believe that this post should be made to the Unified Communications and Video forum.
    Would please you repost to that group.
    Thanks

  • Time Machine starts iMac at night (even when shut down)

    Hello,
    Time machine is starting my iMac serveral times during the night (even when my Mac is shut down).
    Is there a way to prevent this and let Time Machine do hourly backups only in defined time frames (e.g. 9.00 am till 10.00 pm)
    Thanks....

    Thnaks.
    But why does Time Machine show updates at 2.00 am, 3.00 am and 4.00 am.
    And I was staning next to the machine when it started last night and it was a complete start from being turned off.
    Auto Startup is turned off in System Preferences > Energy Saver
    For me it would be sufficient to have one backup per day and not every hour. Can the frequency be changed in Time Machine?
    Regards....

  • Router still show ISDN up on "sh isdn ac" command even when ISDN down.

    Hi experts,
    I encounter a situation where my router still showing the isdn is up (in "sh isdn ac" command) even when the ISDN is down (I shut it down). Is it an IOS bug?
    My router is Cisco 3640 with IOS Version 12.3(21). The IOS are currently upgrade from Version 12.2(6a).
    The ISDN is a backup for leased line to MPLS. It will first call to MPLS nearest node LAC router, and if that failed, it will call to HQ as a last result.
    Thanks.
    Azmir.

    This has to be a bug. Please check the bug navigator. Also, the show isdn status is showing the clear picture. The layer 3 status is showing as 0 active calls. That means it is not able to clear the isdn call history data.
    --Pls rate if useful--

  • Sleep Indicator Problem when Powering Down MacBook

    When I power down my MacBook Pro and close the laptop, the sleep indicator light comes on. It does not pulse like it does when the machine is asleep, it stays constant. Then when powering the computer back on, the power button is unresponsive and needs to be held for a moment in order to turn the computer back on.
    I tried unplugging the computer while I was away from it, and after a couple of hours the sleep indicator was off and the battery was completely drained. After plugging the computer back in, it booted up like normal.
    I usually turn the computer on when I get home from work, and turn it off before I leave for work in the morning. So, the computer is usually off for about 10 hours a day. Also, I usually cycle the battery once or twice a week to keep it from dyeing on me. I have owned the computer now for about two years and keep all the software and security packages up to date. If anyone has input, it would be much appreciated. Thanks.

    The LED light comes on only after I close my laptop, it doesn't turn on until the top is closed. I always close the laptop after I turn it off though, I haven't tried leaving it open after turning it off. And I usually give it about a minute or two to completly shutdown before I close it up for awhile. By holding down the power button to turn the computer on, is that considered a forced shutdown?

  • Why is my Samsung Gusto vibrating when powered down?

    I bought a used Samsung Gusto (SCH-U365) and it turns on just fine.  However, when you power it down, it vibrates softly and consistently.  I'm assuming that it would drain the battery if left powered down.  When the phone is powered on, there is no vibration issue.  Any ideas?

    Just a thought - do you have a sound set for when the phone powers on or off?
    Power - Control whether your phone plays sounds when you turn the
    phone on or off.
    1. From the Home screen, press the Left Soft Key
    Menu ➔ Settings ➔ Sounds ➔ Power.
    2. Choose Power On or Power Off to control the sounds.
    Does the vibration continue if the phone is plugged in and charging?  Or does that not make a difference?  The vibration stops when you remove the battery, correct?  Does it happen if the phone is using house current (plugged in, no battery)?
    I'm puzzled what would cause this...so the questions are to try and narrow down when it happens, so we can maybe figure out WHY it happens!

  • 3gs fast battery discharge even when powered off

    I have a 3gs (not jailbroken) which discharges the battery really quickly to the point where it cannot be recharged.  It discharges the battery to the point where it won't take a charge, even if fully powered off.  I have replaced the battery twice and upgraded to ios 5, setup as a new phone. Still nothing.  I am out of ideas, is there anyone who can assist please?
    Not under warranty
    Using latest version of itunes

    Any number of things could have gone wrong. Dirt or some conductive material could have fallen into the phone and be shorting something out. Any number of components could have been damaged in such a way as to cause a short.
    Apple offers a reasonably priced battery replacement program for iPhones. That would have been the best route to take. Since it's been opened, I doubt you'd be able to go that route now.
    It's also possible that the battery you got is NOT up to the specs it was supposedly rated for.

  • Camera Flash stuck ON, even when powered off

    Got an iPhone 4 last weekend. I took a few photos with the camera app and somehow the flash LED is now stuck "on". All the time. I can switch it to camera mode or video mode and it stays on. I turn the phone off (holding down the On/Off button and Slide to Power Off) and the LED stays on. I reset the phone (Settings/General/Reset/Reset all settings) and it is still on. Selecting any of "Off/Auto/On" in the upper left of the camera screen changes the text to "Off", "Auto", or "On" appropriately, but the LED stays on. The only way I can affect the output of the LED is to select "On" in video mode, which makes it brighter. Selecting "Off" again makes it less bright.
    Thanks in advance for any suggestions.

    I just got an iPhone 4 today and by the time I got it home (hadn't called anyone or used it at all yet) the light was on before I even got it out of the box. I turned it off... hard reset... downloaded a flashlight app (which made it dim after turning it on and off once but it doesn't go away) ... Pretty much the same issues everyone above is having...
    Any input on this would be great... Thanks and goodluck!

  • When downloading apps updates, none of the updates actually complete, they remain 'processing file' even when the down load looks complete. Any help?

    This problem is happening when I run iTunes, regardless of whether any devices are connected.
    And none of them can be deleted from the progress list either...

    This problem is happening when I run iTunes, regardless of whether any devices are connected.
    And none of them can be deleted from the progress list either...

  • Computer restarts when powering down Lacie TB HD after updating to 10.10.2

    Hello -
    I was wondering if anybody else is having an issue with their Lacie or other external Thunderbolt hard drives after updating to 10.10.2?
    I noticed this morning after un-mounting my Lacie Thunderbolt external drive and powering it off my iMac's screen flickered a few times and then restarted, if anybody else is having this same issue?  If so have you found a fix?
    Thanks!
    justin

    We are talking about this here: Macpro 2013 late update 10.10.2 make problem with thunderbolt drive

  • Why when powering down Mac does screen darken & prompts me to power down?

    Not sure if you can see this or not - but, when I turn my computer off through the apple menu, the screen is suddenly glassed with a dark film and a gray box comes up in the middle of the screen that reads:
    "You need to restart your computer. Hold down the power button for several seconds or press the restart button"
    Then I have to press the power button in order to turn the computer off!!! ANY IDEAS????

    Yep that's a kernel panic. That's not good. It usually means something is screwy with the hardware. Do you have Techtool if you bought applecare? It can check the hardware of the computer. Either that or start up from your Leopard DVD hardware test by holding down d at startup. If you hold down c at startup with the DVD you can run disk utility to repair permissions or repair the startup drive.
    Have you changed the RAM recently? I recommend you reset the PRAM/SMC just to see if it changes anything. Also, repair disk permissions and verify your startup disk in disk utility.
    Reset the SMC by shutting down, taking out the battery, and holding down the power button for 5 seconds. Next, put it all back in and hold down command-option-p-r until it chimes twice at startup.

Maybe you are looking for