RF monitor traffic lights

How do the two fields of capacity used work to define the workload for users in the RF monitor traffic lights?

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

Similar Messages

Traffic light in RF monitor screen (LRF1) - how it is derive from?

Hi,
This is a question about WM-RF. My question is how does the system determine the traffic light color in the RF monitor screen (LRF1). I read the SAP help portal and compare it to the screen and it still doesn't make any sense out of it..
On the SPRO, there is DEFINE QUEUE table, with thefollowing setup:
WS--QUEUEQName-CapacUsed-CapacUsed----AccessLim
110--B01_GEN-GenName610--
2StrictLimitation
Thus the relation is: 6/10 = 0.6
Next, I went to LRF1 and saw this record with warehouse 110, and Queue B01GEN, and having the following value_:
QUEUE -
TOs--LOADProc.By--
Propotion
B01_GEN----150.0002--
Green
Thus the relation is: 15/2 = 7.5
Why is it green? SAP help portal give the following explaination, and I don't know to derive it?
A- The queue tranffic light is green if the relation is less than the value given in the left relation field.
B - The queue traffic light is yellow if the relation is greater than or the same as the value specified in the right field.
C - The queue traffic light is red if the relation is greater than or the same as the value specified in the left relation field.
Please share if you know.
Thanks..Tuff

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

Control and monitoring of traffic lights

i am a student and new to graphical programming.i am using labview 6.1 to monitor and control a system of traffic lights from a central location.my problem is geting the lights to go on and off.

You asked the same question here and the answer is still the same. Provide some details on what exactly you're attempting to do and what specifically is the problem. That means details on what kind of hardware you're using to interface to the lights, any error codes being generated, etc. Posting your program would help as well.

The traffic light meaning in LRF1 (Warehouse Monitoring)

Hi,
The sap help portal explaination on the traffic light meaning in LRF1 (Warehouse Monitoring) is quite confusing.
1.     Green u2013 the proportion is less than or equal to the lower threshold
2.     Yellow (warning) u2013 the proportion is greater than the lower threshold
3.     Red (critical) u2013 the proportion is greater than the upper threshold
what is exactly does it mean and what is the impact for the user? an example will be great.
thanks
Tuff

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

How to differentiate defects in QA32 using Traffic light

Hi QM Experts,
My scenario is,
How to set Monitor control in QA32 screen.
In the QA32 screen list of inspection lot will be displayed, for that inspection lot if any characteristics value is within / outside the limit, ie. for example specification is A2,R3 and i found 1 defect also defect is 4.
how to differentiate this with the help of Traffic light.
Regards,
Krish

Hi Krish,
As per best of my information, the traffic lights in QA32, depends on the Start Sate and End Date of the inspection lot.
If the End Date is not passed away (the current date is between the Start Date and End Date) it will be yellow.
If the End Date is Passed away and UD is not not for the Lot then the traffic light will be RED and as soon as UD done at any date/stage the light will become Green.
Conclusively, the light can't be linked with Defect Codes.
Regards,
Shyamal

Traffic light in work orders

Hi!
I am searching for an traffic light overview for workorders. For example if some of them are overdue, Partially confirmed,.. I am interested in the system status and I want to assign the traffic lights accordingly to the system status. I use transactions "iw38 or iw39"
In our SAP System it isn't possible to activate the "monitor". Is this depended on the customizing?
THX for your help.
br patrick

Do anybody know something about such Traffic lights? br patrick

SLA and traffic light in CRM_DNO_MONITOR

Dear Service Desk gurus.
1)In CRM_DNO_MONITOR where are traffic light and corresponding column "Valid to". How does the traffic color and "Valid to" date are calculated?
Is it customizable and connect to message Priority?
2) When SLA is configured for support desk, Are there any reports or light/alerts for message, that were not processed according to SLA rules?
Regards
Vladimir

Hi,
Field in the transaction monitor for traffic light function at transaction level. Calculation is based on the corresponding time stamp. The traffic light function is determined via the date type SRV_CUST_END for the transaction header.
Thx,
Waseem.

How to delete request in yellow traffic light?

Hi experts:
I created one infopackage yesterday to load the vendor text from our DEV source system. Its update mode is "Initialize Delta Process". When I right click on the infopackage and select manage, I see this request is still in yellow and 'Request has a yellow traffic light in the monitor - Cannot be deleted.' And when I go to Data selection I got the information: "Init. select. for field name currently running in request ***".
Does anybody know how to delete the request still in running or in yellow traffic?
Another thing is when I double click on the infopackage a warning message will pop up with: " Assign a language field to IOBJ 0LANGU; danger of short dump". Do I need to take care of this warning?
Thanks to everyone for your time in advance~
Tim

Hi,
Make the request forcefully into RED and then delete it, you can do it in RSMO or goto Obejct and Manage and then Click on YELLOW color Ball and then it will popup one window there make to red and delete it.
The reasons for Yellow
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks

Traffic Light Color for Empty Requests Disabled

Hi Gurus!
I'm having a trouble with a DELTA InfoPackage associated to our 0VENDOR_ATTR DataSource... For some reason the "Traffic Light Color for Empty Requests" option is Disabled (grayed out), and that's causing the failing of its respective ProcessChain (since after Initialization of the data source there are no new data to load)... I was wondering if you may have an idea about what am i doing wrong? Any help would be appreciated.
Regards!
Ricardo

Hi,
As you have selected the option for the init package, the system is not allowing the same for the Delta as the same will be applicable for Delta as well.
The other place where you can set is at the Manage of the target or at the monitor (RSMO) level. If once set its fine for that target.
You dont need to worry.
Are you facing any issue for the data loads which are with 0 records at present due to the status? Do let us know.
THanks
Murali

Issue about Automated Process Traffic light status

Hi experts,
In our system(BW 3.1), we found sth interesting. The automated data load finished. But when monitoring the status using T-code RSMO, we found some traffic lights are set to red. The reason for red light is timeout.
I figure: There is sth such as 'finish flag' for the traffic light to turn green, but after the dataload finished, the system didn't get it, so it waited till timeout.
I am not sure of it, and can't find any material about it.
Could anyone help me to explain this phenomenon?
many thanks and best regards,
Zehua

Hi,
Data will always be loaded into the cube irrespective of the traffic light status. Whether the load is in the cube or no, depends on the processing stage at which it has failed. You can see this in the monitor.
Goto the details tab. There are multiple headings like Extraction, Transfer, Processing.
Extraction and transfer are related to how the data is brought into the system. Processing is when the data is actually loaded somewhere either PSA or infoprovider or both depending on your processing type set in the infopackage.
In your process chain, various processes are triggered depending on the type of link maintained in between two processes. These are of 3 types 1) Successful 2) Failed 3) Always .
If the 1st one is selected, then the chain will move forward, if the previous step is green, 2nd case, if it is red and the 3rd one always.
Regarding why the status are not being updated, check where the load is yellow. If it is transfer, then possiblities are that IDOcs are'nt being set properly, if it is a custom datasource with function module check whether the NO_MORE_DATA exception is being raised properly.
Also check whether there are any short dumps in the source system or the BW system
Hope this helps,
Regards,
Regards.

Traffic light MB5M

Good morning,
I implanted validity control in the material and to monitor the expirations. I use the transaction MB5M for you monitor the expirations.
Does the possibility exist to personalize the traffic light in the transaction SPRO?
Example:
Green >= 60 days
I yellow> 30 <60
Red <1
Thank you.
Ricardo

Answered in link Alerts in MB5M

How to ... Traffic Lights from Exceptions or CellValue in WAD

Hi all,
I need to create traffic lights in the WAD. They should occur either depending on exceptions of a certain query/view or on a special cell value (which I suppose to be quite complex ... table interface(?)).
I tried the alert monitor element, but that doesnt suite the "traffic light" expectations as it seems.
Does anybody of you have a manual for creating fancy traffic lights in the WAD? Is there a way without hardcoding this table interface? (I am unexperienced with stuff like that / ABAP coding - if you could guide me through to having a suitable interface I could use with JavaScript then, I would be delighted)
Best regards and thanks very much in advance for some answers,
Michael

Michael,
I am not sure if you can have icons outside the query that can be controlled by the query values. You could do one thing ...
1. have a query with an extra Key figure.
2. Have your validation formulae on this key figure and have an exception on the same
3. Now your exception column would have three colors.
4. Now execute the report in IE and go to view source.
5. Look for the stylesheet classes for the exceptions , they would be something like SAPBexGood1... etc
6. Go to the table interface ( I assume that you would have figured out how to inherit the class and modify the same from the how to paper...)
7. Go to c_cell_data
8. if cell_style="SAPBeXGood1" then replace c_cell_content with <img src="/sap/bw/mime/icons/icon1.gif" /img>
9. Go to the css and find out your stylesheet class.
10. Remove the background color attribute from the required style.
for checking through JavaScript.
1. The query should have a separate stylesheet class attached to it.
2. It should have one cell only
3. You can replace the value by using style.innerHTML=whatever you want.
Hope this helps...
Arun
Assign points if found helpful
Message was edited by: Arun Varadarajan

IW38 Traffic Light for Custom Date field

Hi Experts,
I am trying use the Reference Field for Monitor. It has got 1. Priority, 2. Order/Start/End, 3. Scheduled Start/End.
We have created a custom date field as Original start/Finish dates. I want to create traffic light based on this date.
Can you please help me where and how to do this configuration. I have already searched the forum. But no help found.
Thanks,
Panneer

Panneer,
You can use Enhancement Spot ES_EAM_LIST_ENHANCEMENTS for this purpose (see SE18)
PeteA

Unable to display the Traffic Lights in a simple Classical Report.

Hi to all..
            I'm creating a simple Program where i need to display traffic lights based upon the the value i enter into it..
i have used AS ICON and type-pools ICON too in my program... but it is not displaying traffic lights.. can anyone provide a solution for it..
type-pools : icon.
data : v_light(4) type c,
           p_tno type i.
p_no = 5.
DO p_tno TIMES.
WRITE: / v_light AS ICON.
ENDDO.

use this code
TABLES: icon.
DATA: t_text(4) TYPE c.
Name
Length
Is button?
Is status?
Is message?
Is Function?
SELECT-OPTIONS:
so_name FOR icon-name,
so_len FOR icon-oleng,
so_butt FOR icon-button,
so_stat FOR icon-status,
so_mess FOR icon-message,
so_fn   FOR icon-function.
SELECT * FROM icon
WHERE
    name     IN so_name AND
    oleng    IN so_len AND
    button   IN so_butt AND
    status   IN so_stat AND
    message IN so_mess AND
    function IN so_fn.
WRITE: /1 icon-id+1(2), icon-name.
CONCATENATE '@' icon-id+1(2) '@' INTO t_text.
WRITE: 35 t_text AS ICON.
WRITE: 40 icon-oleng, 50 icon-button, 60 icon-status,
         70 icon-message, 80 icon-function.
ENDSELECT.
TOP-OF-PAGE.
WRITE: 40 'Length', 50 'Button', 60 'Status',
         70 'Message', 80 'Function'.
Nabheet

Traffic lights in ALV list header

how do i display traffic lights as icons in ALV list header. for example, in the code below, i want to display a green icon at the end of closed items and a red icon at the end of the open items:
closed : 4 [green-icon]
open : 2 [red-icon]
CLEAR header_alv_wa-info.
header_alv_wa-key = 'closed:'.
header_alv_wa-info = gv_closed.
header_alv_wa-typ = 'S'.
APPEND header_alv_wa TO headeralv.
CLEAR header_alv_wa-info.
header_alv_wa-typ = 'S'.
header_alv_wa-key = 'open:'.
header_alv_wa-info = gv_open.
APPEND header_alv_wa TO headeralv.

Hi,
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
the above links will give u the code for the same..
Regards,
Aparna

RF monitor traffic lights

Similar Messages

Maybe you are looking for