RF pass through not working in High ECO mode stand...

I recently changed the ECO mode on my BT G4 DTR-T2100 box from Low to High - I have the RF loop through power option set to On but when my box goes into low power standby (red light on the front) my TV picture starts pixelating. The moment I press the power button on the BT box the TV displays a normal picture so it looks like the box is not providing power to the RF pass through when in low power standby? Any one else have the same problem? Is the box faulty or is there a problem with the software?
Solved!
Go to Solution.

zulu17 wrote:
That is how the box is designed to work.
If you look at user guide P29 of the current version on the web it explains that you need to be at Low eco mode for RF loop thru.
Thanks - makes some sort of sense I suppose though it would be more obvious if the RF option was disabled if the High Eco option is selected.

Similar Messages

Imac 5.1 pass through not working

Can anyone help me get 5.1 pass through sound out of my iMac?
I have a video file I have created with a 5.1 sound track.
I have a 2009 imac, 27 inch. running Lion
I have connected the imac to a Marantz AV receiver, using the toslink cable.
The sound plays but the AV receiver will on read a STEREO signal.
If I stream the exact same file to my apple TV via itunes then the AV receiver can read the 5.1 sound.
I am guessing that there is something set up wrong on the imac.
Anyone know where I am going wrong?
Cheers

I have the same problem with my 27" late 2009 iMac. I am unable to output surround sound throught the digital optical output using a toslink cable with an adapter. But what I do to output surround sound is use the minidisplay port. I connect a minidisplay port to HDMI cable to my iMac and the HDMI input on my reciever. Check out my post about outputting surround sound from your Mac.
https://discussions.apple.com/thread/3639822
I hope this helps.

IMovie 5.0.2 and VCR- Camcorder Pass Through not working

Anyone have any idea why I can't plug my VCR into my Sony-TRV27 via A/V cables, then plug my camcorder into my Powerbook via firewire and capture the VHS footage. According to all documentation I have read, I should be able to use my camcorder as an Analog to Digital converter and capture in iMovie.
I can see the VHS video on the camcorder but as soon as I plug into the CPU and open iMovie the screen turns blue.
Any help would be greatly appreciated!
Thanks.
CB
Powerbook G4 1.67 Mac OS X (10.4.4)

Had the same symptom at first.
iMovie wouldnt record if the camera was feeded by the signal of a VHS machine.
I went along and solved it.
The used SONY Camera would allow to actually REC a signal in VCR mode (used to be and still soemtimes is called PLAYBACK mode). You have to find a Record button (or a pair of, as in our case) and actually record the VHS signal onto the camera - then iMovie would gladly show the image as well.
Unfortunately this solution has the drawback of wearing the camera mechanics off because you actually record soemthing you dont really use.

I downloaded Windows 10 and my Simple Pass is not working.

I downloaded Windows 10 and now my Simple Pass is not working. I get a message that HP Connected Remote isn't responding and to be sure the service is running. I went under programs and repaired it but I still get the same message. Thanks in advance for your help. Please don't make it too complicated.

DUPLICATE POST
Please see: https://discussions.apple.com/thread/5513386?tstart=0

Can IPS 4345 work in High Availability mode?

Hi all,
Can IPS 4345 work in High Availability mode?
Or can it have a bypass unit? Kindly help. Is there any alternative to this model in Sourcefire?
Regds,
Ram

Hi,
Cisco 4300 series IPS supports High-availability mode.
you can run it in active-active mode and also in active-standby mode.
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

Hp pavilion e15 games are not working in high performance

I'm using
HP Pavilion 15-e015tx
and windows 8.1 os.I'm having a problem that some of the games are blinking or not working properly in high performance in amd graphics driver.The games are working only on power saving mode and I'm experiencing very poor graphics performance.How can i get rid of this? pls tell me a solution

In order to get proper help or solution you should list the devices specs for example processor type, ssd or conventional hard drive type graphics card model example apu or discrete and how much ram is installed plus is it tailored for gaming, I will be honest with you consumer notebooks are not ment for gaming.
Do you have the latest updated software installed for the card? Is your internet connection being hampered by background tasks?
If what I just said doesn't make any sense to you then you should simply refresh your system install the game and see if the problem still persists other wise your devices is not ment to run game's.
Pavilion 17-e188sd Notebook PC
AMD E1-2500 Radeon 8200
Samsung SSD EVO 840
Corsair DDR3 8192 MB RAM
QC 802.11bgn/BT/Win 8.1 64 bit

Had to reset router, pass did not work, how to make secure again?

Password would not work, had to reset to factor. How do I make a new password and secure it again?
WRT5462

Wireless Configuration: Manual Wi-Fi Protected Setup -------------------------------------------------------------------------------- This is where I am. I don't see anything that says create new user name.. help Wi-Fi Protected Setup TM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number,enter that number here and then click OR 3. If your client asks for the Router's PIN number,enter this number 51164188 in your client device. -------------------------------------------------------------------------------- Wi-Fi Protected Setup Status: Unconfigured Network Name (SSID): linksys Security: Disabled

Z3 Compact scenes not working in manual camera mode

Hi. That's my problem: when I use manual camera, the scn button is grey and not working, so the HDR. They worked when I bought the phone, at Christmas... No mod root etc. Please help me!
Solved!
Go to Solution.

http://support.sonymobile.com/global-en/xperiaz3compact/userguide/Using-still-camera-settings/
It has to be set on Manual mode at 8mp
HDR
Use the HDR (High Dynamic Range) setting to take a photo against strong back light or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
This setting is only available in Manual capturing mode.
ISO
You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
Auto
Sets the ISO sensitivity automatically.
50
Sets the ISO sensitivity to 50.
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
1600
Sets the ISO sensitivity to 1600.
3200
Sets the ISO sensitivity to 3200.
This setting is only available in Manual capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
Centre
Measures the centre of the image, and determines the exposure based on the brightness of the subject there.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
Face
Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
Multi
Divides the image into multiple regions, and measures each region to determine a well-balanced exposure.
This setting is only available in Manual capturing mode.
Image stabiliser
When taking a photo, it can be difficult to hold the device steady. The stabiliser helps you by compensating for small movements of the hand.
This setting is only available in Manual capturing mode.
Preview
You can choose to preview photos or videos just after you shoot them.
Unlimited
The preview of the photo or video appears after you shoot it.
5 seconds
The preview of the photo or video apears for 5 seconds after you shoot it.
3 seconds
The preview of the photo or video appears for 3 seconds after you shoot it.
Edit
The photo or video opens for editing after you shoot it.
Off
The photo or video is saved after you shoot it, and no preview appears.
Face registrationYou can register faces with the Camera application so that the viewfinder automatically focuses on these faces when they appear in the viewfinder.
Flash
Use the flash to take photos when lighting conditions are poor or when there is a backlight. The following options are available when you tap the flash icon in the camera screen:
Auto
The camera automatically determines if the lighting conditions require the use of a flash.
Fill flash
Use this setting when the background is brighter than the subject. This removes unwanted dark shadows.
Red-eye reduction
Reduces the red colour of eyes when taking a photo.
Off
The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos.
Torch
A torch or camera light is turned on when you take photos.
Scene selection
Use the Scene selection feature to quickly set up the camera for common situations using pre-programmed scenes. The camera determines a number of settings for you to fit the selected scene, ensuring the best possible photo.
Off
The Scene selection feature is off and you can take photos manually.
Soft Skin
Take photos of faces using an enhanced beauty effect.
Soft snap
Use for shooting photos against a soft background.
Anti motion blur
Use for minimising camera shake when shooting a slightly dark scene.
Landscape
Use for landscape photos. The camera focuses on distant objects.
Backlight correction HDR
Use to improve details in high contrast shots. The built-in backlight correction analyses the image and automatically adjusts it to give you a perfectly lit shot.
Night portrait
Use for portrait photos taken at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Night scene
Use when taking photos at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Hand-held twilight
Use for taking hand-held low-light photos with reduced noise and blur.
High sensitivity
Use for taking photos without a flash under low light conditions. Reduces blur.
Gourmet
Use for shooting food arrangements in bright colour.
Pet
Use for taking photos of your pet. Reduces blur and red eyes.
Beach
Use for taking photos of seaside or lakeside scenes.
Snow
Use in bright environments to avoid overexposed photos.
Party
Use for indoor photos in poorly lit environments. This scene picks up indoor background lighting or candlelight. Due to long exposure time, the camera must be held still or placed on a stable surface.
Sports
Use for photos of fast-moving objects. Short exposure time minimises motion blurring.
Document
Use for photos of text or drawings. Gives the photo increased, sharper contrast.
Fireworks
Use for taking photos of fireworks in all their splendour.
This setting is only available in Manual capturing mode.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

BDC on FK01 is not working in NO-SCREEN Mode

Hi gurus ,
i have a situation,
A custom interface (built as per requirement) is facing some issues with BDC when executing in "NO-SCREEN mode".
There was a requirement to include email adress while creating permitted payee vendors for corresponding Original vendors iN sap.
Now it used to create them . But after i retrieved the email details for a vendor and passsed in the BDC based on some condition, it doesnot work in "NO-SCREEN Mode" . For ALL Screen Mode it is working as expected ; when OK-CODES are given it asks with a pop-up which mode of communication reqd.
if email is selected then it assigns onto the new payee vendor being created. What's the problemwith NO-SCREN Mode?
could somebody plz guiide here.
Thanx
kylie

Hi Sandra ,
Thanks for your suggestion throiugh the link.
Had checked the trouble shooting for BDC : but the scenario in which i experienc eth eproblem is little different.
Well the Interface to create vendors was working perfectly in ALL Screen as well as NO-SCREEN mode.
But a small requirement seem to change its execution.
The Interface had a commented code snippet : retrieve email address from ADR6 table. Now according to the new requirement this code snippet needs to be utilized. So i uncommented that and duly passed th etable entries into the concerned screen (the code for that screen aldready exsits in the recording but not utilized since the retrieval was commented)
Collects the email address for any vendor from ADr6 table
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
now for linking the above created vendor, FK02 BDC is maintained. In this BDC the payment transaction screen is used to link payee vendors (above created vendor) at company code level for any principal vendors (selected from lfa1 and lfb1 table). So only two screens for linking .
this entire code was working perfect in both A mode and N mode but after including the ADR6 code snippet i dont find teh similar execution in N mode.
Could you please guide me where could i ahve made some mistake.
thanks
Kylie
Edited by: kylietisha on Jun 6, 2010 5:27 PM
Edited by: kylietisha on Jun 6, 2010 5:42 PM
Edited by: Rob Burbank on Jun 6, 2010 4:33 PM

Tab key does not work properly in Assessment mode

I am predominatly using Adobe Captivate for software simulations and assessment purposes.
I've seen similar items posted on the forums and noted this appears to be a common problem with a solution, to edit the HTM file with the code so.addParam("seamlessTabbing", "false"); see post http://forums.adobe.com/message/5283597#5283597.
I tried this with a file that was published without the need for SCORM compliance and it worked fine. Once the requirement was introduced for SCORM compliance (and to publish as a Zip file), this does not work as the code is different in the HTM file.
My file has the following code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">

<html lang="en">
<head>
<link rel="stylesheet" type="text/css" href="captivate.css" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Enter Billable Time - Assessment</title>

<script language="JavaScript1.2" src="standard.js"    ></script>
<script language="JavaScript1.2" src="scormdriver.js" ></script>
<script language="JavaScript1.2" src="SCORM_utilities.js" ></script>
<script language="JavaScript1.2" src="Utilities.js"   ></script>
<script language="JavaScript1.2">
   //Register event handlers
   window.onkeypress    = CheckForDebugCommand;
   window.onload    = OnloadActivities;
   window.onbeforeunload = Finish;
   window.onunload   = Finish;
   document.onkeypress   = CheckForDebugCommand;
</script>
</head>
<body>
   <div id = "CaptivateContent">
    <noscript>
     This course requires JavaScript to be enabled in your browser.
     Please enable JavaScript, then relaunch the course.
    </noscript>
   </div>
</body>
</html>
How could I edit this to disable the "seamless tabbing" referred to in the original article to make the TAB key work as intended.
Thank you.

This is from my e-book:
http://www.infosemantics.com.au/troubleshoot-adobe-captivate
Notice that the procedure for Seamless Tabbing in Cp6 with SCORM is different to that for normal non-LMS courses.
Implementing Seamless Tabbing in Cp6
All Captivate versions up to and including Cp6 had Seamless Tabbing active by default and set in the HTM template code. But you can still turn it off by manually inserting some code into the published HTM file as follows:
Navigate to your published Captivate content and open the HTM file in Notepad.
Locate the line of code in the HTM file that starts with:
var so = new SWFObject(
Add the following code on the next line:
so.addParam("seamlessTabbing", "false");
Save changes to the file and test by running your project again in the browser. You should now be able to use the TAB key without leaving your published content.
Adding seamless tabbing to Cp6 SCORM support files
Seamless tabbing in Cp6 SCORM projects is a little more complex because the templates are quite different to those used for normal content. To control seamless tabbing in SCORM content you need to make the changes to the SCORM_utilities.js file in the Captivate install directory.
Depending on whether you’re on 32bit or 64bit, you should be able to find it at one of these locations:
32bit:
C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\Templates\Publish\SCORM\Default\js
64bit:
C:\Program Files\Adobe\Adobe Captivate 6\Templates\Publish\SCORM\Default\js
Open the SCORM_utilities.js file in Notepad or another suitable plain text editor. Scroll down to the end of the code until you find the following lines:
so.addParam("quality", "high");
so.addParam("wmode", CONFIG.WMODE);
so.addParam("bgcolor", CONFIG.BGCOLOR);
so.addParam("menu", "false");
so.setAttribute("name", CONFIG.SWFOBJ_NAME);
so.setAttribute("redirectUrl", CONFIG.REDIRECT_URL);
so.addParam("AllowScriptAccess","always");
so.write(CONFIG.TARGET);
Add the so.addParam("seamlessTabbing", "false"); code to this group and save the file.
If you are currently unable to save changes to these template files, my gut feeling would be that it must have something to do with your user permissions. E.g. you are not an Administrator for your own PC. Is that possible?

IMAQ OverlayMnltiLines vi not work in fill color Mode on CVS1456 VGA

Hi,
I try to output colorful polygon on NI CVS 1456 VGA with IMAQ OverlayMultiLine vi Fill mode and it just output the frame of the polygon but not fill the color to the monitor. Try the OvelayRectanglewith Fill color, the vi works. Is there anyone know why? How to make the OverlayMultiLine vi's Fill mode work? Thanks!
John

Good afternoon John,
This information has been passed onto our R&D department. Earlier in the week, I tested out this problem and came across the exact same results. The OverlayMultiLine.VI works correclty in the "Fill" mode when run on the host computer. However, the "Fill" mode does not work properly when deployed to the CVS.
I apologize for this inconvenience!
Respectfully,
Jeffrey P.
LabVIEW Product Management
National Instruments

F10 Key not working in Web Browser mode

I created a click box on a CP5 screen and assigned F10 as the Shortcut key and the action is "Go to the next slide." When the user presses F10 the demo would advance to the next screen.
This works great in preview mode. However, when in Web Browser mode, nothing happens except I get this message at the bottom of the screen, "Contains commands for working with selected item."
How do I get the F10 key to work (action desired: advance to the next screen in my demo) in browser mode?

Hi there
LIkely it depends on the browser, but some keys are always reserved for use by the browser itself and they cannot be used as shortcut keys by a Captivate SWF because the browser will intercept them and not pass them on to the SWF.
I'm not sure if F10 is among those keys, but it may well be.
This would likely beg the question of why Captivate would allow you to assign a shortcut key if if wouldn't work when you publish and play in the browser. And for that I would remind you that SWF output is just one of the ouputs Captivate may produce. If you published as EXE, you aren't bound by browser behavior and the key would likely work just dandy.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Image Buttons Not Working in IE10 Normal Mode

Hi Team,
Greetings of the Day!! We are supporting a project which included the technologies "ADF , BPEL , AIA , SOA".
We have a page developed in ADF and the page contains TABS.
We have a LOV which have 'Add Product' as one of the value.
When we click try to Configure the Line for a particular Product it is redirecting dmz-server where we have 'YES/NO' Buttons but this buttons are not working in IE-10 Normal mode and in other browsers buttons are working fine.
Could some one please help me on this.
Thanks

For that matter, the "return to menu" which is set to a Main button type, isn't working either. that is one of the three. After i had removed the damaged button and copied it from another it worked. Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons. I just can't figure it out. I have shut the app down and restarted and nothing seems to be working

Apply button not working In Sharepoint Integrated mode

Env:- SSRS 2008 R2 with Sharepoint 2010
For some report users, the Apply button is not working (SharePoint integrated mode).
After they select all the parameters in report and hit apply button , the page remain blanks and nothing happens.
This issue is experienced by certain user only.
When i checked the ULS log i found this during that duration
Process                                     Category
Category          EventID
ReportingServicesService.Exe Sharepoint Foundation      Database              4ohq
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.ReportingServices.SharePoint.ObjectModel.RSSPBaseCollection.get_Count()
at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetProperty(String propertyName)
at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetSystemUrl()
at Microsoft.ReportingServices.Library.GetSystemPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingServiceSPImpl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010Impl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010.GetSystemProperties(Property[] Properties, Property[]& Values)
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()
at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at ReportingServicesHttpRuntime.RsHttpRuntime.ProcessRequest(IRsHttpPipeline rsHttpPipeline)
Can somebody please help on this.
Thanks,
Sandeep
~~ Mark it as Answer if you find it correct~~

Hi Sandeep,
Thanks for your feedback.
I haven’t find any documentation illustrate this limitation, it’s just my experience, I have a report which contains a muti-value parameter, it contains 500 value items and the length of each value is equal or greate than 10 characters, when I select
all parameter values, there is no response when I click the apply button, however, when I only select several items in it, the report showing fine, I could not sure your issue is the same with mine, it’s just my conclusion. If your issure is not related to
the length of the selected parameter, just occures to certain users even they selected with the same parameter values with the other users who run fine with this report, then this reply should not adapt to your scencario, it is so unbeliveable it is not working
only for certains users, I have not experience this issue before, and the information you provided is so limited that I could not address the root cause of your issue.
Thanks,
Bill Lu
Bill Lu
TechNet Community Support

Magic Mouse not working in 32 bit mode?

Hello,
I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
Anyone have an idea?

Never mind... this is the MAC Pro section!
I must be really out of it this morning.... :/
Message was edited by: MACATTACK2010

RF pass through not working in High ECO mode stand...

Similar Messages

Maybe you are looking for