RF- SapConsole only for WM?

Hi all
i would like to know if standard R/3 transactions for RF-terminals exist olny for WM module.
For exemple we need to execute a good receipt for purchase order or a transer by a reservation.. without implementing WM. Is it possible or we need ABAP-programs?
Thanks
Massimo

Hello Massimo,
I would like to know if standard R/3 transactions for RF-terminals exist olny for WM module.
For exemple we need to execute a good receipt for purchase order or a transer by a reservation.. without implementing WM. Is it possible or we need ABAP-programs?
Mobile data entry is mainly developed to carry out the transactions which are used for managing warehouse. Most of the warehouse transactions are supported with MDE, but these are the std transaction and may not be VERY useful for all the clients so you need some modification in this.
IM level transaction is not supported by MDE i.e. GR against PO, GI against reservation etc. You need to develop this program using the ABAP and it should be competible for Hand held device or Forklift mounted device (i.e. screen size should be 16X20 or 8X40).
We have developed some IM level transactions and assigned these transactions to the menu to use in handheld.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

SRM Classic - Automatic PO creation in R/3 only for PReqs based on catalogs

Dear Experts,
in SRM 7.0 Classic Scenario, i am facing the following question w.r.t. automatic PO creation on the R/3 side:
Is it possible to have automatic PO creation in R/3 only for those purchase requisition items, that are based on shopping cart items from a third party punch out catalog?
The idea is, that the requisitioner on the SRM EBP side shops in a catalog. Once the the SC is approved and the purchase requisition is created in the R/3 system, automatically a PO should be created based on that PReq. This would save the time for the buyer, who do not need to pay attention to this document, because the purchase from the catalog guarantees the buyer, that the already pre-agreed conditions are getting applied.
But PReqs that are based on Free Text shopping cart EBP items must not be taken into account for the automatic PO creation.
Is there a way to distinguish between the catalo-based and the non-catalog based PReq positions?
Thank you.

Hello Ashutosh,
thank you very much for that idea!
I would have the following question w.r.t. to such configuration:
If i configure that the PO creation for complete SC should happen for a certain purchasing group, would it be somehow possible to arrange that when a Catalog item is put into the shopping cart, that only that certain purchasing group gets defaultet? (the idea behind this is, to leave the free text shopping carts to already known purchasing groups and to keep the purchase requisition as the backend object for this configuration. And additionally to create new purchasing groups, that should be linked to the catalog purchases and to POs as the backend objects).
Thanks again for the help!

Automatic PO creation - only for PRs based on catalog SRM/EBP items

Dear Experts,
i am facing the following question w.r.t. automatic PO creation:
Is it possible to have automatic PO creation in R/3 only for those purchase requisition items, that are based on shopping cart/EBP/SRM items that are from a third party punch out catalog?
The idea is, that the requisitioner on the SRM EBP side shops in a catalog. Once the the SC is approved and the purchase requisition is created in the R/3 system, automatically a PO should be created based on that PReq. This would save the time for the buyer, who do not need to pay attention to this document, because the purchase from the catalog guarantees the buyer, that the already pre-agreed conditions are getting applied.
But PReqs that are based on Free Text shopping cart EBP items must not be taken into account for the automatic PO creation.
Is there a way to distinguish between the catalog-based and the non-catalog based PReq positions?
Thank you.

Auto PO transaction ME59N comes with huge selection crieteria. If you can distinguish between catelog vs non catalog requisition then it very easy to set up variant to filter non catalog based requistion. you can also think about ehnacement of polulating text fields like Requisitioner or Requirement tracking number with unque idetifier in case of non catalog based PR then you can set variant to filter out those requistions..

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to be

My iPhone was stolen a few days ago. It appears to be offline on the Find My iPhone app. If the person who has it turns it on only for a brief moment and then turns it off immediately, will the location still be found? Once it returns to being offline will the location still be sent to me? And also, how can I retrieve my pictures from my iCloud?

Anything is possible.

[CC] How to perform a script "foo_beforeSave.htm" only for specific site?

Since a long time I use a script for automatic text replacements which perform with each save command.
The script sits in that folder:
C:\Users\myusername\AppData\Roaming\Adobe\Dreamweaver CC\de_DE\Configuration\Commands\foo_beforeSave.htm
It works for all documents of all sites.
The source code (the regex rule is just an example) of the script you find below.
My question:
I like to perform a script like this only for a specific site.
I'm not a programmer. So I don't know where to place the script to reach that target. Or how I have to edit the source code of the script.
Is there anybody who could help me with that please?
I would appreciate it a lot. Thanks
<!DOCTYPE HTML SYSTEM "-//Macromedia//DWExtension layout-engine 5.0//dialog">

<html>
<head>
<title></title>
<script src="../Shared/Common/Scripts/dwscripts.js"></script>
<script>
function canAcceptCommand(){
    return true;
function getFileName(url) {
var index = url.lastIndexOf('/');
if (index != -1) retVal = url.substring(index + 1);
else retVal = url;
return retVal;
function runCmd(){
    var dom = dw.getDocumentDOM();
    dom.synchronizeDocument();
    var path = dw.getDocumentPath('document');
    if(getFileName(path) != 'foo_beforeSave.htm'){
        var docEl = dom.documentElement;
        var tempDoc = docEl.outerHTML;
        tempDoc = tempDoc.replace(/&bdquo;/g,'„');
        tempDoc = tempDoc.replace(/„/g,'„');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/”/g,'”');
        tempDoc = tempDoc.replace(/”/g,'”');
        docEl.outerHTML = tempDoc;
</script>
</head>
<body onLoad="runCmd();">
</body>
</html>

Well, the posted script is a full working one.
I just search for a way to limit the range of the script to the actual site.
Therefore it is unimportant, which regex is in the example.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to change the background color only for one HTML-Portlet?

Hi all,
I have created a HTML-Portlet in my root-page. The root page have a style: Main-Style.
I want to change the background-color only for this one HTML-Portlet:
<html>
<header><title>Test</title></header>
<body bgcolor="#999999">
Test
</body>
</html>
But this does not work...
When I use the CSS, then it will change the background-color for the root-page too.
Thans
Leonid Pavlov

could you try this
<table bgcolor="#999999">
<tr>
<td>
test
</td>
</tr>
</table>
I don't think you need <html><header><title>Test</title></header>
<body></body></html> for your HTML-Portlet.

How do I keep a page as my home page when dragging icon to left of URL to house image & confirming that I want it as home page works only for current session, so when Firefox next opened, I end up with some stupid search page which McAfee doesn't like?

A couple of days ago, I connected to the Internet as usual & opened Firefox, only to be greeted by an almost blank screen with a Google-type search box in the middle & this message from McAfee:
"Your default search settings have changed. This may pose a security risk. Would you like to restore them to McAfee Secure Search to provide a safer searching experience?"
instead of my usual home page (BT Yahoo). I naturally clicked on the "Yes" option in the message, but rather than restoring my BT Yahoo home page, all that did was to insert the McAfee logo to the left of the search box in the top right-hand corner of the screen. The first time it happened, I had to search for the BT Yahoo page & then followed the standard procedure for setting it again as my home page. It worked only for that session: each time I shut down Firefox or restarted my computer after that, all I got was the blank "search page" & restoring the previous session was the only way to get back to BY Yahoo. How on earth do I make the home page setting permanent?
As far as I'm aware, I have done nothing to alter my search settings. However, I am anything but computer-literate, so I may have done/pressed something without realising it, but trying to understand what is now happening is far beyond my limited IT skills.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Interest calculation only for open item for customers

Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared items. I have problem with customization.
Best Regards
Tom

In the item interest calculation, you can tick the 'open items' for calculation of interest and also select the 'no cleared items'.
Regards

Inspection lot should be created only for particular vendor

Hi
Can anyone please help in achieving the below scenario:
*Material has been assigned to the inspection type A (one time inspection) has been set as preffered and active in the inspection set up in the material master.
*Quality level has been created for material and vendor such that inspection should be carried out when next stage is 1 and no inspection should carried out when next stage is 2.
*Tasklist has been assigned with material and vendor .
Material can be supplied by different vendors,For this material, inspection should be done only for one vendor and for other vendors there should not be any inspection to be done and no inspection lot should be created.i.e Inspection lot should be created only for one vendor say AA whereas now inspection lot is getting created when goods receipt is done for the purchase order with other vendor BB.
My requirement is the inspection lot should not be created when goods receipt is done with other vendors say BB except AA.
Is there any other way other than using quality info record to achieve this.
I can try with DMR but the thing is there should not be inspection lot created while posting GR.
can anyone suggest me any other way to achieve this requirement.

There are user exits when you create an inspection lot. One of those could be used to suppress the inspection lot. Have you looked at these? Have you researched any QM user exits yourself yet? This isn't the first time this specific question has been asked over the years.
It's not hard and there are lists of QM user exits available all over the internet.
Please do some research.
You can also assign vendors to inspection plans with a DMR that requires one inspection, and than after that creates all skip lot inspections which you automatically close by a batch job. The first lot can be manually forced closed. Thereaftter all receipts would be skipped. Not 100% but pretty darn close. This requires that you know which vendors to assign to which plan. Probably as much data maintenance as maintaing the Q-info records.
And yes.. your client needs to come up with better reasons than "I don't wanna..". It's part of a consultants job to convince them.
Craig

Disable Drill options only for one dimension of Web Analysis report

Hi,
Please help me on below issue.
I created a web analysis report with 3 dimensions Accounts, MRC and Measure. I have to disable drill down and drill up options only for Measure. Accounts and MRC should be drillable where as Measure should show the selected member as static and not drillable.
Thanks

Hi Swetha,
You must've realized that- Even if you select only the desired members, you end up being able to drill-down unwanted members. Correct ? :)
The only way, I believe, is- To create a users' group at your Data source side, perhaps, Essbase & provision this new group with a Metaread filter which prevents him/her from Drilling down to the leaf node.
PS: Giving Read access might also let the user not see the data for children. But, if you want to hide the members also, Metaread+ is the way to go.

To generate quota only for disabled employees

Hi All,
i have one requirement here. i need to generate quota for challeneged employees. but there is no separate ESG for time quota to identify challeneged employees.
i created challeneged groups in challenge infotype 0004. ans assigned this challenged group in genaration rule for quota types. but it is showing quota for all employees in time evaluation , It is not picking up the information from IT 0004.
i want to resrtict quota for all employees. it should display challenged quota only for challenged employees, when i assign challenge group in generation rule for quota types.
can anybody provide me the solution for this. it isd urgent. rewards will be given.
Regards
Vani

Hai..
Check Infotype 82.. Special Absences..
Special Absence Data
Additional Absence Data
Define Types of Additional Absence Data
Create Workers' Compensation
Define Events for Absence Data
Link Absences to Additional Absence Data

How to set a MessageTextInput to be Read Only for a specific row?

Hi,
In Benefits Self Service, particularly the Update Beneficiaries page, it lists all your eligible Beneficiaries including yourself. The table has the following columns displayed for each beneficiary: Beneficiary, Relationship, Social Security Number, Primary %, Contingent %, Clear. This is the page where you allocate the Primary % and the Contingent %. The Primary % and Contingent % are MessageText Input.
We have a requirement that we wouldn't want an employee to designate himself/herself as a beneficiary. However, the employee is being listed as a beneficiary along with all the other eligible beneficiaries. Oracle says it is an intended functionality to include the employee in the beneficiary. Is there a way thru Controller Object extension to set the Primary % and Contingent % as Read Only but only for the row corresponding to the employee to prevent the employee from accidentally allocating himself/herself as a beneficiary.
I know there is the SPEL functionality but this requires me to add a transient attribute to the View Object corresponding to that table. But everytime I make a change to the View Object either by adding a transient attribute or some other changes, I end up getting an error on the standard Relation attribute of that view object. The error is something like "Relation set attribute failed for View Object". I cannot get pass this error and I'm not sure what's causing this. I see other people in this forum have encountered the same problem when extending view objects but no specific solution was offered nor any clear explanation of the cause.
So I thought if there's any way this could be done thru Controller Object extension. If so, please let me know how. The challenge for me I think is finding the bean corresponding to those Message Text Input but only for a specific row in the table.
Thanks,
Ronaldo

Hi,
I also tried extending the View Object but without changing anything to the SQL so it is exactly the same as the standard view object but I still get the "Attribute set for Relation in view object BeneficiaryPeopleVO1 failed". Based from this, extending the view object whether any change has been made or not affects the standard transient Relation attribute.
Here is the standard XML definition of the View Object if anyone is curious
<ViewObject
Name="BeneficiaryPeopleVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVORowImpl"
ComponentClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
FetchMode="FETCH_AS_NEEDED"
FetchSize="10"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pcr.person_id person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
pcr.contact_type contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
nvl((select 'Y' from dual where (to_date(:1 , 'rrrr/mm/dd') between
          nvl(pcr.date_start,to_date(:2 , 'rrrr/mm/dd')) and
          nvl(pcr.date_end,to_date(:3 , 'rrrr/mm/dd'))) and
          (pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))), 'N') rel_exists_flag
FROM per_people_f con,
per_contact_relationships pcr,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE pcr.personal_flag = 'Y'
AND (pbn.pl_bnf_id is not null or
(to_date(:4 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:5 ,'rrrr/mm/dd'))
AND nvl(pcr.date_end,to_date(:6 ,'rrrr/mm/dd'))
          and pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt)))     --Bug 4297137
AND pcr.contact_person_id = con.person_id
and pen.person_id = pcr.person_id
AND pbn.bnf_person_id (+) = con.person_id
AND to_date(:7 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND pcr.person_id = :8
and pen.prtt_enrt_rslt_id = :9
and to_date(:10 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:11 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and pbn.prtt_enrt_rslt_id (+) = :12
and ((to_date(:13 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:14 ,'rrrr/mm/dd')) and
nvl(pcr.date_end,to_date(:15 ,'rrrr/mm/dd'))) or
((pcr.date_start = (select max(pcr2.date_start)
from per_contact_relationships pcr2
where pcr2.contact_person_id = pcr.contact_person_id
and pcr2.person_id = pcr.person_id
and pcr2.personal_flag = 'Y')) and
not exists (select null
from per_contact_relationships pcr3
where pcr3.contact_person_id = pcr.contact_person_id
and pcr3.person_id = pcr.person_id
and pcr3.personal_flag = 'Y'
and to_date(:16 ,'rrrr/mm/dd') between
nvl(pcr3.date_start,to_date(:17 ,'rrrr/mm/dd'))
and nvl(pcr3.date_end,to_date(:18 ,'rrrr/mm/dd')))
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pcr.person_id,
pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
pcr.contact_type,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id,
          pcr.date_start,
          pcr.date_end,
          pil.lf_evt_ocrd_dt,
          con.date_of_death
union
SELECT to_number(null) person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
'SLF' contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
'Y' rel_exists_flag
FROM per_people_f con,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE
pbn.bnf_person_id (+) = con.person_id
AND to_date(:19 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND con.person_id = :20
and con.person_id = pen.person_id
and pen.prtt_enrt_rslt_id = :21
and to_date(:22 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:23 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and (pbn.pl_bnf_id is not null or pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))     --Bug 4297137
and pbn.prtt_enrt_rslt_id (+) = :24
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id
ORDER BY 3,14
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.13.75" />
<Attr Name="_CodeGenFlagNew" Value="36" />
<Attr Name="_rowSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewRowImpl" />
<Attr Name="_objectSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewObjectImpl" />
</DesignTime>
<ViewAttribute
Name="PersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERSON_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PrttEnrtRsltId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PRTT_ENRT_RSLT_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Beneficiary"
IsQueriable="false"
IsPersistent="false"
Precision="332"
Type="java.lang.String"
AliasName="BENEFICIARY"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="Ssn"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="SSN"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PrimaryPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Type="oracle.jbo.domain.Number"
AliasName="PRIMARYPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ContingentPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="CONTINGENTPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BnfPersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BNFPERSONID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BusinessGroupId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BUSINESSGROUPID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PerInLerId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERINLERID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PlBnfId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PL_BNF_ID"
ColumnType="$none$"
Expression="PL_BNF_ID"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ObjectVersionNumber"
IsQueriable="false"
IsPersistent="false"
Precision="9"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OBJECT_VERSION_NUMBER"
ColumnType="$none$"
Expression="OBJECT_VERSION_NUMBER"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="EffectiveStartDate"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Date"
AliasName="EFFECTIVE_START_DATE"
ColumnType="$none$"
Expression="EFFECTIVE_START_DATE"
SQLType="DATE" >
</ViewAttribute>
<ViewAttribute
Name="ContactType"
IsQueriable="false"
IsPersistent="false"
IsNotNull="true"
Precision="30"
Type="java.lang.String"
AliasName="CONTACT_TYPE"
ColumnType="$none$"
Expression="CONTACT_TYPE"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="BeneficiaryFullName"
IsQueriable="false"
IsPersistent="false"
Precision="240"
Type="java.lang.String"
AliasName="BENEFICIARY_FULL_NAME"
ColumnType="$none$"
Expression="BENEFICIARY_FULL_NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="240" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="DbPrimaryPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_PRIMARY_PCT"
ColumnType="$none$"
Expression="DB_PRIMARY_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="DbContingentPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_CONTINGENT_PCT"
ColumnType="$none$"
Expression="DB_CONTINGENT_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Relation"
IsQueriable="false"
IsPersistent="false"
Type="java.lang.String"
AliasName="Relation"
ColumnType="$none$"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="DeleteSwitcher"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="DeleteSwitcher"
ColumnType="VARCHAR2"
Expression="DeleteSwitcher"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PlId"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PlId"
ColumnType="VARCHAR2"
Expression="PlId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="OiplId"
IsUpdateable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OiplId"
ColumnType="VARCHAR2"
Expression="OiplId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="RelExistsFlag"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="REL_EXISTS_FLAG"
ColumnType="VARCHAR2"
Expression="REL_EXISTS_FLAG"
SQLType="VARCHAR" >
</ViewAttribute>
</ViewObject>
Thanks,
Ronaldo

RF- SapConsole only for WM?

Similar Messages

Maybe you are looking for