RF Tuner not working correctly in Pavilion DV6-1200

Having troubles tuning the computer to the tv signal. The signal is via a wall cable RF type, Comcast cable.The computer can not detect the source data, however when a normal tv is plugged into the same cable, it tunes into 35 channels. The tv tunes to the signal prior to June 12, 2009 (NTSC). There is no setup box being used. I have used windows media centre and HP media center to tune the computer in but no success yet. The tuner mode I thought that should work is Analog Cable NTSC, plus tried every other mode many times over. The strange thing about this whole matter I was connected to HP tech support for 4 HOURS on this matter! They could not give me any reason why this was happening!!!! The tv tuner does work with the supplied antenna using the Digital Antenna Mode. When I talked to HP tech support, their so called tv tuner experts, they could not tell me what the Analog Cable NTSC mode was used for! Regards, Ed

Hi,
Please uninstall the existing version and install the newer version:
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64126.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Audio device not working. HP Pavilion dv6-6c50us

My audio device is disabled. There is no sound both the speakers and by using earphones, how can i fix it please? Product name: HP Pavilion dv6-6c50us Product no. A6X90UA#ABA Windows 7 64-bit
This question was solved.
View Solution.

Try system recovery.. I just did it and it worked! You should restore your computer to an earlier time before the sound stopped working.. And you can do that by going to the control panel. GOOD LUCK !!!

F12 function key not working on my Pavilion DV6 7170er

I'm runung windows 8 X64 bit version. i'm using win 8 since few months, all that time function key work properly until hp support assistant update my system bios version to f.24 automatically .after that cause that problem f12 key is not working it's indicate amber lite every time,can't switch on wifi, if wifi on it have to turn into white clolor.all other function keys are working properly.i checked evety thing, device manager saying wifi adapter working properly but windows 8 mobile center showing it's turn off.i checked via bios system components it's showing wifi adapter "PASSED". hp connection manager programs can't open it's hanging long time and after that showing error massage - error code 80080005 .
Please if any one have suggest let me know...
Thank you...

gaurian82,
I’m glad to hear that everything is working.
Thanks for posting the solution that you found.

PAvilion dv6, fan not working correctly?

Was on my laptop, it shut down randomly, notification popped up saying fan was not working correctly. Is there a way to fix this? Or will it have to be sent away?

Try a can of compressed air in the reverse direction of the normal air flow. You may just have a massive amount of dust on the inside of the heatsink near the fan blades.
Here is a youtube video and about 15min in you can see the fan clearly:
http://www.youtube.com/watch?v=5VMqrudLhJA&feature=player_detailpage#t=1s
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

HP PAVILION DV6 6154FAN NOT WORKING CORRECTLY

MY LAPTOP FAN IS NOT WORKING CORRECTLY A STARTUP MESSAGE COMES FAN NOT WORKING CORRECTLY GO TO SUPPORT FORUM.
MY PRODUCT WARRANTY IS OVER.
PLEASE ADVICE ME WHAT TO DO.
SEEKING FOR KIND SOLUTION.

Try cleaning up the cooling module. Blow compressed air into the fan grill. Test the laptop after the fan and heatsink is clean.
If cleaning the cooling module doesn't help, you'll have to replace the fan. This requires complete laptop disassembly.
In order to replace the fan you'll have to remove the motherboard.
Here's the official service manual which could be useful.
By the way, there are two different types or cooling modules. One for AMD processors and another one for Intel processors (page 93 in the service manual).
If you decide to replace the fan, it's not necessary to replace the entire cooling module assembly (heatsink and fan). It's possible to replace just the fan which can be purchased on eBay.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

My laptop sound is not working correctly what to do?

HP Pavilion DV6-3031tx os is windows 7 64 bit and i have taken my laptop in dubai can i get the warrant in india.?

Hi,
Please do NOT post many threads for same problem. What do you mean "not working correctly" ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Newest version of i tunes not installing correctly

gets to starting services then pops up that i tunes not installed correctly with error message r6034 and says to reinstall which i do with the same results. It also says an application has made an attempt to load c runtime library incorrectly. Help

I experienced a similar problem. While trying to download iTunes 9.0.3 I got an error message "network resource where source is located is unavailable (something to that affect). Please re-install iTunes."
The next time I tried to download iTunes 9.0.3, i selected "save" instead of "open" the iTunes.setup.exe. I then saved it to the download folder. I still got the "network.." error but the iTunes.setup.exe did finish downloading into the download folder.
I then went to download folder and selected iTunes.setup.exe by right clicking on it. I selected "Properties." Under the "General" tab, there was an option to "unlock" this file. I selected "unlock," then closed the dialogue box. I then tried to run iTunes.setup.exe by right-clicking on it. It worked like normal.
Apparently, Windows 7 put some kind of security lock on iTunes installer while downloading it. This lock has to be removed before the setup exec can run.
I hope this helps.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

my audio does not work on my pavilion dv4

This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Hauppauge WinTV-HVR 95Q TV TUNER not working with windows 8.1 HP TouchSmart 15 Notebook PC

I've updated all drivers I can find from the manufracturer. Are there any other HP drivers I need? This worked fine on Windows 7 without having to update to a 'Pro with Media Center' edition. I've updated to Windows 8.1 Pro with Media Center. Another comsumer had their question answered here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/TV-TUNER-not-working-with-w...
Was going to ask if there was a driver for the Hauppague tuner there but it wouldn't let me post a question asking if there was one of those drivers for the Hauppauge WinTV-HVR 950Q.

I updated all drivers to their latest versoins before beginning. Waiting on response from vendor.

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

RF Tuner not working correctly in Pavilion DV6-1200

Similar Messages

Maybe you are looking for