RFC 1939 delete problem

sorry if this is the wrong post
my problem is :
i am writing mail server
in POP (RFC1939) i found that every message after reading has to be deleted
is that right?
is it necessary to delete the message after reading the mail message ?
hope for help
thanks in advance

Mattoa,
In RFC Adapter - Receiver Adapter
Below are mandatory input, Check whether it has mentioned like this,
Message protocol : RFC ( RFC XML )
Adapter Engine : Integration Server
Application Server : give complet host ( host.abc.com ) ( give the complete host info )
Authentication Mode : Use Logon data for SAP System
RFC Server : SAP ECC system
Cheers
Agasthuri

Similar Messages

RFC Message: Internal Problem, in REDWOOD CPS.

We have Redwood CPS 7 connected up to SAP IS-U Supply.
We keep getting random RFC errors when executing a script.
Any Idea
ERROR LOG   *******************
ABAP_RUN: R/3 call BAPI_XBP_JOB_OPEN failed
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
TCTRETURNS/        : deleted
/ERROR LOG   *******************

Hi,
if this is a random issue I assume that the authorizations of the CPS communication user are OK, otherwise please verify:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/bb35b8623a489aa63abd9f5ebf2448/frameset.htm
If this random issue happens only if you execute your custom script, I would assume that the script wants to create a job with invalid data. For example: some data is missing or wrong like start date/time, job class, job user, job name.
Let's analyze what you have posted here:
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
-> XM034 point to the XMI log
-> use transcation RZ15 to analyze the XMI log
-> XM034 means "problem detected" (see appendix 8 of document ftp://ftp.sap.com/pub/icc/bc-xbp/BCXBPDOC70V3.pdf)
I locked into the code and indeed it seems that function BAPI_XBP_JOB_OPEN returns this message if the job cannot be created.
So if Sys- and XMI-Log cannot help you in solving this issue, I would create a message for dev. support.
Cheers,
Martin
http://service.sap.com/jsm

Two Related (?) file deleting problems in Finder and Time Machnine

My internal drive is partition into two volumes. In the second one (the "non-boot" one), I was have trouble putting files in the trash that were locked. As I was tracking that down I coincidentally(?) started having another problem.
I started getting a message that the files being put into the trash must be deleted immediately. I check permissions and I had read/write Privileges in the user account I'm normally logged into. However, If I logged into my administrator account, I could put things in the trash without deleting them. I noticed that ignore ownerships wasn't checked, so I checked that.
That allowed my to put files into the trash without immediately deleting them. I went ahead and deleted the files I wanted to get rid of. However, I'm wondering if there was another issue because I am lead to understand that the ownership privileges shouldn't have necessitated checking "ignore ownerships"?
Also, I had trouble deleting the backups of those files and folders in time machine. I can delete most of it. But for one folder (and all the folders in which it resides in the hierarchy) I can't deleted it. I tell it to delete backups of that folder (or folders it is in), I put in the password, and goes "ding". But nothing disappears...
(After I wrote this, I tried unchecking "ignore ownerships" and the problem did not reappear. I can still put files in the trash without the immediate deletion problem.)
Message was edited by: davidpsummers
Message was edited by: davidpsummers

Pondini wrote:
davidpsummers wrote:
Also, I had trouble deleting the backups of those files and folders in time machine. I can delete most of it. But for one folder (and all the folders in which it resides in the hierarchy) I can't deleted it. I tell it to delete backups of that folder (or folders it is in), I put in the password, and goes "ding". But nothing disappears...
Are you doing that via the Finder or Terminal? If so, that's not the way to delete backups. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
And now I'm getting an error in time machine. "Files can't be copied onto the backup disk because it appears to be "read only"". I do get info on the disk, and my account has Read & Write privleges, but it say "You can only read" above that".
The Finder or Terminal deletions may have corrupted your backups. Repair them, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Message was edited by: Pondini
I'm doing the deletion through Time Machine (I go into Time Machine, find the folder in the backup, and ask Time machine to delete all backups of that folder).
I did find the tip of unmounting the disk, rebooting, and remounting it. That Stopped messages about the disk being read only. However, the folder still doesn't delete. I'm also a bit worried about these being symptoms of some other problem...
Message was edited by: davidpsummers

SDB - delete problem/solution

Hi Experts.
Is it possible to delete problem/solution from solution database? There is information in help that it is not possible to delete problem/solution, but that they can be archived.. But note 946030 says it is not available...
Regards
Piotr

Hello Piotr,
In version 4 it was released one note (730402) that allow us to delete some symptoms and solutions. However, this may lead into some inconsistencies if they're linked with documents. We've never tried to execute it.... but if this may help you, try it
Kind regards,
Bruno

Data request deletion problem from remote system.

Hi experts.
Now i am facing one critical problem . The description is as following:
we design the edw level in one phsical BW machine(A) which contains only dso infoprovider. This machine(A) works as datasource to provide data to another physical BW machine(B).
The dso in A system is exported as datasource , Cubes in B system load data through this datasource .
We first do the initialization with data contained on B system and then load delta data from A system. But if we want to delete some request in system A ,the system indicate this request can not be deleted unless the initialization in system B is deleted( this will lead to all the data missing in system B).
Can anyone explain this mechanism to me , please help me suggesting some kind of methods to delete the request in system A without deleting the initialization information in system B.
Thanks in advance.
Waiting online for your kindly reply.

1. Ask your Basis to look into it.
2. try analyse your Baqckground Process in SM51.
3. Is your Deletion Job started immediately or any Delay?
4. If That cube or ODS has only this request which you are deleting, go with Context Menu Cube or ODS (by right click) --> Delete Contents.
Delete Contents will improve performence compare to Request Deletion..
If you have request more than this, you should not go for this.
Nagesh Ganisetti.
Assign points if it helps.

Order Deletion Problem

Hello all...i've a strange situation...When a planner deletes an order in the past for a particular time bucket, the order gets deleted in this bucket but is added up to the next bucket. Does anyone know why this might happen??
Thanks!
NV

one more point...this works perfectly for the future buckets and only for the past buckets we are facing this problem...this is in SCM 4.0
Thanks!

RFC-JDBC Scenario:Problem in RFC

Hi All,
I have a BTE for BOM...in which i have a remote-enabled FM which i have imported in XI.
When i call this FM in a loop in BTE....i dont get any data in XI.
It works fine with a single loop pass...but it doesn`t work for more than one.It is something like this
loop at ...
    Call Funtion 'BOM' IN BACKGROUND TASK DESTINATION ..
     EXPORTING
            I_STZUB    = I_STZUB
     TABLES
            T_CLRKB    = T_CLRKB
            T_CLSTB    = T_CLSTB.
endloop.
Can anybody please help on this !!!
Regards,
Ruchi

Hi,
    I suspect the below
1. Either logic in fetching the data might be a problem or huge volume of data can be ap roblem,so better check the program by disabling the RFC..(i.e generate the report with out passing the data to the RFC...and check whether it works fine or not...)
2. if you find the problem is with the huge vloume..then test the Report by fetching the data in chunks instead of entire dump...
if still the problem persists then better to go with the proxy implementation...as the proxies are meant for that...
HTH
Rajesh

RFC call having problem while calling from webdynpro

Hi ,
I am facing a strange problem .In my webdynpro i have a RFC function module . the structure is like this.
Loop.
<GET current system>.
TRY.
call <RFC FUNCTION MODULE> DESTInation <own system> .
ENDTRY.
ENDLoop
With in the Function module we have created a BDC seesion.
Here the loop is running for 10 times .for the first time it is the rfc call is perfect and a session is created in sm35.
For the second loop run the system is going to hang.and when i checked sm35 the next day 1 session is created (for the second loop)
Like this the session are created in different days .And the session created times are like00:00:04,00:00:08 etc.
I have checked if any hold time is there for the session but there is noting like this .
And i digged more and checked in SM50 there the call is running in background and it is connected some other system though i have given the target system as own system.
please advice me about this and how to find the root cause for this.
thanks

Thanks for your reponse .
Here the problem is it has already been developed now the Bug is the function call is still running and the sessions created as
below
17.06.2010     00:00:30     SAPMSSY1
17.06.2010     00:00:28     SAPMSSY1
16.06.2010     00:00:36     SAPMSSY1
15.06.2010     01:21:46     SAPMSSY1
15.06.2010     00:59:33     SAPMSSY1
15.06.2010     00:01:06     SAPMSSY1
Now teh problem is why the sessions are not created at the same time i executed it.ie,on 11:06:2010.
so,please let me know why is call is taking that much long time .(it is very rare for RFC call for such a long time ).

Synchronous RFC -- SOAP Scenario: problem with SOAP Response/Fault Mapping

Hi,
I've a synchronous RFC --> PI --> SOAP Scenario. The problem is that the message structure of the sending RFC doesn't match the Webservice Structure.
The (SAP standard) RFC has just a Request / Response message structure. Part of the Response Message structure is a exception structure.
The Webservice has a Request / Response message structure and in case of an error I get a SOAP:Fault.
Problem now is that I cannot configure that scenario without usage of BPM as I will have to map SOAP:Response or SOAP:Fault to the RFC Response structure.
Has anybody another idea to do that synchronous scenario (with usage of message mapping) without BPM?
BR
Holger

1)
you maus define 3 mapping.
1)request
2)response
3)Fault
in Interface mapping define at response boths (2-3) mapping. its clear??
2)
otherwise sometjhing is not clear, why do you want fault?? why dont you get only response message. we implement this kind of response:
<response_MT>
<ID> (error ID)
<system> (target system)
<error> (Error Description)
</response>
by this way fault message is not needed. but if you must have it just follow the top of message else, propose second.
Thanks
Rodrigo
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Feb 25, 2008 11:52 AM

[RFC to File]Problem about Changing file name in message mapping.

Hi,
my problem:
    Type:RFC to File
    I change the file name in message mapping.
when I call the RFC to send the data twice at the same time, both of the output file names are changed while I only want to change the second output file name.
    thanks
Sam

In my MM, the input values to these variables (var1, var2 and var3) are (<ZZCOMBI>array,G499999,END_FIFC0029) ,
var1 is an array of input <ZZCOMBI> item list;
var2 is get from a property file by call another UDF;
var3 is constant value.
the test input data :
I send the data for the first time:
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G000002G000002</ZZCOMBI>
<ZZKYKBN>*</ZZKYKBN>
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G000002G000002,G499999,END_FIFC0029)
the output file name(File1) :END_FIFC002920090413-171534-053.dat
output record: G000002G000002
because the data what I send is the last record, the system send the dummy data for the second time by program.
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G499999</ZZCOMBI>
<ZZKYKBN />
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G499999,G499999,END_FIFC0029)
the output file name(File2) :END_FIFC002920090413-171533-928.dat
output record: G499999
I find that File2(20090413-171533-928) was ouput before File1(20090413-171534-053 ) from the time stamp.
I am not sure about that "XI will create a message ID for each message and the messages are independent." as you mentioned above.
Best regards
Sam
Edited by: YONGHE ZHOU on Apr 15, 2009 3:59 AM

RFC Receiver Adapter (Problem)

Hi All,
I have configured RFC Receiver Adapter : Here i have imported a Z FM for example
"" Z_API_DOCUMENT_CREATE_TEST "" having below import paramaters:
LF_DOCNUMBER     TYPE     BAPI_DOC_DRAW-DOCUMENTNUMBER
IV_PF_HTTP_DEST     TYPE     RFCDES-RFCDEST
IV_PF_FTP_DEST     TYPE     RFCDES-RFCDEST
LF_FILENAME     TYPE     BAPI_DOC_DRAW-DOCUMENTNUMBER
1) Now i use MM to fill in two parameters : LF_DOCNUMBER , LF_FILENAME
If my FIle is of kind : test55.pdf     --> LF_DOCNUMBER = test55
                                                       LF_FILENAME       = test55.pdf
For this i have checked in Sender File Adapter "Adapter Specific Message Attributes"
So i write UDF to capture Filename and Filename with extension to fill above shown parameters.
Now i saw target xml after mapping in CC monitor of RWB is as below
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Z_API_DOCUMENT_CREATE_TEST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<IV_PF_FTP_DEST>SAPFTPA</IV_PF_FTP_DEST>
<IV_PF_HTTP_DEST>SAPHTTPA</IV_PF_HTTP_DEST>
<LF_DOCNUMBER>xierror</LF_DOCNUMBER>
<LF_FILENAME>xierror.doc</LF_FILENAME>
</ns0:Z_API_DOCUMENT_CREATE_TEST>
But LF_FILENAME is getting populated to my Z FM at runtime but LF_DOCNUMBER works fine filling up with value.
But when i run the FM using F8 it works , what could be the problem.
Any advice
regards
Srinivas

Hi,
The problem is with the Data types used for LF_DOCNUMBER.
Make this as Char or Numeric in FM and then try. If its of any packed values then conversion will create the problem
Thanks
Swarup

Photo Stream delete problem

When deleting photos in Photo Stream from my 4s or iPad 1, it used to delete universally from all devices. I added my apple tv, and now it says "This photo will be removed only from the Photo Stream on this (iPhone or iPad)." how do I get the universal delete back? This problem makes managing photos for the Apple tv Photo Stream screen saver difficult.

I should add that I signed out of Photo Stream on the apple tv, still have only local delete on all my devices.

The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers. This is only happening on my Macbook not other macs. Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

opps. Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers. This is only happening on my Macbook not other macs. Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those. Checked for software update and installed suggested downloads. Problem still contintues. Any suggestions?

Folks,
even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
What else can be done to correct this problem?
Thanks and best regards.
Fred Kunz-Shirzad
Chemin Ronzeures 6A
1297 Founex VD
Switzerland
[email protected]

JSP item deletion problem

I have a minor problem in JSP that I can't get fixed.. When I try to remove all items from my shopping basket it deletes all items except one.. but in fact he deletes them all but fails to refresh the correct content of the shopping cart.. (at least.. that's what i think..)
<%
String name = request.getParameter("action");
     if (name!=null){
     if (name.equals("emptyCart")){
     myCart.deleteAllItems();
%>
Remove all items
So, when I add 3 items e.g. and I click on "remove all items" the first item I added still shows up in my cart, when I reload the window, it's gone.. I tried to add a JS function that would reload the window, but it doens't change anything..
Your help is greatly appreciated,
Michael

As i stated the JS function is just a function that reloads the document, but even using that the problem remains;
Here's the code from my bean:
package myShoppingCart;
import java.util.*;
public class myCart implements java.io.Serializable{
     private Vector items = new Vector();
public myCart(){
     items = new Vector();
public void deleteAllItems(){
     items.removeAllElements();
Thank you for helping out,
Michael

IPhoto delete problem

To quote Charlie Brown, "ARRRGGGHHH!!!" Now that I have that off my chest. I, too, am experiencing a problem deleting images from iPhoto 5. Like the proverbial bad penny, they keep coming back. Whenever I move images from the iPhoto main library to the iPhoto trash and select "empty" iPhoto crashes and will only respond to "force quit." I have left the pastel pizza spinning for hours. Only force quit will stop the show. I tried selecting individual images and using control, option, delete. The images do disappear from the library and the total count (now at 11,754) is reduced by the number of images selected. When I close iPhoto and then reopen it, the images are back. I tried deleting images and thumbnails from the iPhoto folder in "pictures" only to have those show up as empty rectangles in the iPhoto library. If I click on one of the empty rectangles I get all the usual information concerning the missing image in the iPhoto menu box but no image. I have tried everything I can think off short of reinstalling iPhoto. I would do this but some of the images cannot be replaced and, since the images in the various sub-libraries were taken over extended periods of time and share DSC numbers, my iPhoto will not export them to any other location or back up device. I am prompted that the duplicate numbers are "busy." My question is: Am I missing something basic, some magic bullet that will allow me to restore function to iPhoto while retaining the desired images or must I have a supreme zen moment of non attachment and start anew?

rix foto
Welcome to the Apple user discussion forums
I tried deleting images and thumbnails from the iPhoto folder in "pictures" only to have those show up as empty rectangles in the iPhoto library. If I click on one of the empty rectangles I get all the usual information concerning the missing image in the iPhoto menu box but no image.
This is a cardinal sin in iPhoto (or in any database program) - by doing this you have corrupted your library - you should never modify the contents of the iPhoto library directly - only via the iPhoto program
You can try rebuilding your library using iPhoto and if that does not work using iPhoto library manager - http://www.fatcatsoftware.com/iplm/ - but probably you are going to have to start over
Reinstalling iPhoto will not help because you have corrupted the data - the program is fine
If rebuilding does not work, you need to go to a backup before you corrupted your library or you need to start a new iPhoto library as follows - quit iPhoto, drag the existing iPhoto library to the desktop, restart iPhoto with a new, empty library and drag the originals folder from the iPhoto library on the desktop to the iphoto icon in the Dock - this will import all of the original photos form your old library (not the modifications, albums, folders or projects)
In the future never modify anything in the iphoto library and do not try to delete more than a small number (say 100 ) photos at a time
Good Luck
LN

RFC 1939 delete problem

Similar Messages

Maybe you are looking for