RFC ADAPTER : Data not getting trasfered to XI

Hi All,
I am using an RFC to File adapter scenerio , The sender is RFC FM ,The config has some constants on reciving side . When the outbound program is run , only the constants are transfered to XI , but the other fields are not getting populated in XI .
Best Regards
Chan

hi,
this means that you're not populating them
duing the FM call
put a break before the CALL function
of your RFC and check if all fields
are populated correctly
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

Data not getting fetched from Quotation to Contract

Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael Appleby

Please add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG

Contact person Rel.ship Data not getting updated in B2B Web User Mngt

Hi CRM Gurus,
Need some help on Web User Management functionality.
Sub: Contact person Relationship data not getting updated when we change the company (to wich contact person belong to) in ISA CRM 5.0 Web User Management.
we are currently on CRM ISA 5.0 and using Web User Managment for our B2B scenario. New creation of users is working fine. But when we want to change the company (Sold to pary) for the existing contact person, the relationship data in CRM is not getting updated and the below are the details.
Contact person No: XXXX (has a Relationship: "Is contac person for YYYY company in CRM)
Company/Sold to Party: YYYY (has a relationship "Has contact person XXXX in CRM).
When I chage the contact person's (XXXX) company from YYYY to ZZZZ,
- Relationships of the new assignment for ZZZZ in CRM not getting updated.
- Old Records in YYYY is not getting deleted (i.e. relationships.
- There is No relationship data appear in XXXX.
Appreciate any inputs on the same.
Thanks,
Rahul >>>

Hi Rahul,
I'd suggest you running a session trace / ABAP debugging to see if some information is not getting passed from the Java stack onto the ABAP stack. An alternate move would be to create a new OSS customer message.
Cheers,
Ashok.

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

HTTP and RFC Adapter are not Required Sender

Hi All,
I have one dought....
Why Plain HTTP and RFC Adapter are not Required Sender Communication Channel and Sender Agreements...
I Know this two Adapter are in ABAP Stack....
Please clarify my dought...
Regards

Idoc Adapters do NOT require Sender Communication Channel.
The Sender System identifies itself at the Integration Server, with the fields SNDPOR and Client of the Control Record.
Sender Communication channels are used for communication betweeen the Application System and the Integration Server.
In the case of Idocs, all idocs are tranferred to the Integration Server pipeline and NOT to the regular EDI/IDOC interface.
The RECEVIER DETERMINATION is based on the values in the Control Record.
If you are doing ALE, then you have to maintain the idoc types which are NOT to be transferred to the Integration server by executing report IDX_SELECT_IDOCTYP_WITHOUT_IS.
By maintaining the Idoc Types using this report, only these idoc types are sent to the regular EDI/IDOC interface.

Team view data not getting refers for some user

Hi,
We are facing an issue in team view app for mss, manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
Regards
Pallavi

Hi Karthik,
in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
In the first BAPI's search action handler I have written:
          Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
          wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
          input.addT_Version(new Zsr_Packnr_Field_Values());
          input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
input.setZsr_Gmc(globalMaterialCode);
          input.setZsr_Mrc(mrc);
          input.setZsr_Ctry(country);
          input.setZsr_Dc(distributionChannel);
          input.setZsr_Div(commercialSegment);
wdContext.nodeOutput_Validate().invalidate(); //as u suggested
          wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
          wdContext.nodeOutput_Validate().invalidate();
In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
Thanks for all your help.
Shubhadip

Sender RFC Adapter - Data to be sent from R/3

I am working on a scenario where I have to send data from an RFC-enabled function module from R/3 to a file server via XI. The entire scenario is asynchronous.
Sender: RFC Adapter
Receiver: File Adapter
I have done all design and the configuration. Both communication channels are working. I have the RFC destination also set up correctly in R/3.
However, when I run my ABAP program where the RFC-enabled function module is called, I get a shortdump with the message "senderAgreement not found: lookup of binding via CPA-cache failed for".
Plus: " The error occurred during an RFC call to another system."
Could someone kidly help?

Hi,
Follow these steps :
1. import the ECC_ Server into ID if not done
2. Refresh Cache : Tcode SXI_CACHE
3. Please check for Sender agreement config
4. Check out the parameters when R/3 calls back XI, it passes the SYS-ID and client number and checks the same in the Integration Configuration Under Business System Service-> Adapter Specific Identifiers. The R/3 System ID and the client Number
Also check out these blogs..
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
regards
Aashish Sinha
PS : Reward points if helpful

Data not getting inserted in R/3 System from Webdynpro

Hi,
We were trying to insert some data into r/3 z-table using a Custom BAPI using RFC.
But the data is not getting inserted.
Through I commit is being performed explicity.
Please help:
Below is the code :
Controllor code :
public void wdDoInit()
    //@@begin wdDoInit()
     try{
        Z_Bapi_Rfq_Test_Input objStatus = new Z_Bapi_Rfq_Test_Input();
        wdContext.nodeZ_bapi_rfq_test().bind(objStatus);
//        Create a new element in node Bapi_Transaction_Commit_Input
      Bapi_Transaction_Commit_Input inputCommit =
      new Bapi_Transaction_Commit_Input();
      wdContext.nodeBAPI_TRANSACTION_COMMIT()
      .bind(inputCommit);
        //Bapi_Transaction_Commit_Input obj;
       // wdContext.nodeZ_Bapi_Quo_Salesrep_Status_Input().invalidate();
        //wdContext.nodeOutput().invalidate();
        //wdContext.nodeRfq_Status().invalidate();
          } catch(Exception rfqException){
                    wdComponentAPI.getMessageManager().reportException("rfqException="+rfqException.getMessage(),true);
    //@@end
public void executeBapi( )
    //@@begin executeBapi()
     try{
               Z_Bapi_Rfq_Test_Input obj = wdContext.currentZ_bapi_rfq_testElement().modelObject();
               AbstractList   objAbBapiPartner = new Bapiparnr.Bapiparnr_List();
               Bapiparnr objBapiPartner = new Bapiparnr();
               objBapiPartner.setPartn_Numb("0000001046");
               objBapiPartner.setPartn_Role("AG");
               //obj.addPartner(objBapiPartner);
               objAbBapiPartner.add(objBapiPartner);
              obj.setPartner(objAbBapiPartner);
              Bapisdhd1 objBapisdhd1 = new Bapisdhd1();
               objBapisdhd1.setSales_Org("2500");
               objBapisdhd1.setDistr_Chan("30");
               objBapisdhd1.setDivision("20");
               objBapisdhd1.setDoc_Type("ZRFQ");
             obj.setHeader(objBapisdhd1);
             obj.execute();
//             Synchronise the data in the context with the data in the model
               wdContext.nodeZ_bapi_rfq_test().invalidate();
          wdContext.nodePartner().invalidate();
               wdContext.nodeHeader().invalidate();
               wdContext.nodeOutput().invalidate();
               wdContext.nodeReturn().invalidate();
//               Z_Bapi_Quo_Salesrep_Status_Output outPut= obj.getOutput();
//               if(outPut!=null){
//                    List materialList=outPut.getRfq_Status();
//                    if(materialList!=null){
//                      wdComponentAPI.getMessageManager().reportSuccess("materialList="+materialList.size());
          } catch(Exception rfqException){
               wdComponentAPI.getMessageManager().reportException("rfqException="+ rfqException.toString(),true);
    //@@end
public void executeBapi_Commit( )
    //@@begin executeBapi_Commit()
     try {
//       Calls remote function module BAPI_Transaction_Commit
     wdContext.currentBAPI_TRANSACTION_COMMITElement().modelObject().execute();
     wdContext.nodeBAPI_TRANSACTION_COMMIT().invalidate();
     wdContext.nodeOutput1().invalidate();
     wdContext.nodeReturn().invalidate();
     wdContext.nodeReturn1().invalidate();
     } catch (WDDynamicRFCExecuteException ce) {
          wdComponentAPI.getMessageManager().reportException(ce.getMessage(), false);
    //@@end
View Controlloer Code:
public void wdDoInit()
    //@@begin wdDoInit()
     wdThis.wdGetCControllerController().executeBapi();
     wdThis.wdGetCControllerController().executeBapi_Commit();
             IWDApplication wedDynApplication=wdComponentAPI.getApplication();
             IWDApplicationInfo applicationInfo=wedDynApplication.getApplicationInfo();
             Collection collection=applicationInfo.getApplicationProperties();
    //@@end

Hi Gareth,
I was not getting enough time to reply, so replying late.
Actaully the problem was with r/3 BAPI Code itself.
There was condition in the begining of the code to check the data in the workare of R/3, so this condition was failing here.
But when we try to invoke that bapi from r/3 workbench it works fine because the data first comes to R/3 workarea then to R/3 Tables.
But when we insert data from Webdynpro framework , the data directly goes to R/3 Tables rather than the R/3 Workarea. So in Bapi the first condition was failing and no data was getting inserted.
So this was the problem, and we solved it.
Thanks,
Regards,
Aditya metukul

J2EE adapter module not getting invoked by module processor

Hi All,
i have deployed my .ear file in SDM Repository successfully.
but my J2EE adapter module is not getting invoked by module processor......this i can say because i have written code to audit log my message in the java class...but when i gave input an empty file, the audit log of that file in Message Audit Log showed only 3 Steps of file converted to XML format, no data found so not generating message, deletion of my empty file.
Can anybody suggest how to enable my J2EE adapter module as i have created this module so that if i give empty file, then in the adapter i am creating a dummy XML for my message.
Thanks and Regards,
Rajeev Gupta

Hi Stefan,
1. JNDI name in visual admin is CustomerMeter
2. the files in .ear file are:
libraries,
ejb project file,
META-INF folder
in ejb project file the following files are there:
ejb-j2ee-engine.xml
ejb-jar.xml
CustomerMeter.class
Please tell what to do now.
Hi Amol,
in audit log only 3 messages are coming: File converted to XML format, no data in document so not sending message, deleting of empty file.
i have given audit log statements in java class but my audit-log statements are not coming in the audit log
this means my adapter module is not getting invoked.
Please tell what to do to correct this error.
Thanks and Regards,
Rajeev Gupta

RFC problem: could not get functionname from XML requst (sic)

I'm developing an interface that attempts to call a receiver RFC on an SAP 4.6c system. It's a very small simple interface, and it's all working until it tries to call the RFC. The error is
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
I've created an RFC channel, which is green in the adapter monitoring. The RFC imports without a problem, and appears in my interface mapping. My mapping program converts to the RFC message type (as evidenced in sxmb_moni. I have a receiver agreement referencing the interface mapping, which must be working as the mapping is called.
Could anyone point me to what else I could check? I saw a post about the same error message, where the respondent found something in the logs which helped them Could you expand on what you found, and in which log please? Any pointers as to which logging options I could switch on and check would be gratefully received.
Regards
Alan Graham

Thanks for the responses.
I set up a communications channel of type RFC, which is
showing green in the adapter monitor. If I deliberately
break it, eg by changing the password, the adapter shows
as red in the monitor. I assume therefore that the
adaptor settings are correct.
The XML going to the adapter looks correct AFAIK. My problem is that I don't know enough about the requied XML to know if what I'm seeing in the logs is sufficient. In SXMB_MONI, in the 'call adapter' section of a failed message, the outbound binding includes
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:rfc:functions</SAP:ToInterfaceNamespace>/code]
Also, the interface determination SOAP header, in the MAIN section includes
[code]<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>D04</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_MPU_3PSCE_FREIGHT_UPLOAD</SAP:Interface>
</SAP:Receiver>
These are the correct values for the RFC name and the namespace, AFAIK.
I'm using an interface mapping (which uses and ABAP class as the mapping program) which references the interface of the RFC. The logs tell me this works, ie, the class is called and the resulting XML appears in the payload of the response.
Alan

RFC - XI - WebService :: Not getting complete Response from WS

Hi
I am working on a following Synchronous scenario
SAP R/3 --> Sender RFC Adapter --> XI --> Rec. SOAP Adapter --> MI Web Service
Now I tested the structure of Request/Response Message from WebService in XML Spy, & designed my Request/Response Message structure in XI based on that.
Now when I am sending the request from XML Spy,the Response message which is coming is this -->
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <soapenv:Body>
 <ns1:getResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="http://www.MI/util">
 <getReturn href="#id0"/>
 </ns1:getResponse>
 <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:AddressDTO" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="http://to.MIutil.com">
 <latitude href="#id1"/>
 <longitude href="#id2"/>
 <postcode xsi:type="soapenc:string">111</postcode>
 <state xsi:type="soapenc:string">XYZ</state>
 <streetName xsi:type="soapenc:string">NYDEL</streetName>
 <streetNumber xsi:type="soapenc:string">444</streetNumber>
 <streetType xsi:type="soapenc:string">ST</streetType>
 <suburb xsi:type="soapenc:string">SQY</suburb>
 </multiRef>
 <multiRef id="id1" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">-33.87571285585008</multiRef>
 <multiRef id="id2" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="xsd:double" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">51.20783220341076</multiRef>
 </soapenv:Body>
</soapenv:Envelope>
{ Pls. take note that it is referring variables}
But when I am sending the Request from SAP R/3 using SAP XI, I am getting the Response message from WebService like this -->
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <ns1:getResponse xmlns:ns1="http://www.MI/util" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<getReturn href="#id0" />
</ns1:getResponse>
which suggest that operation is getting called successfully & response is coming back.
Can you tell me what is the reason that why I am not getting the rest of the response .
Regards
- Lalit Chaudhary -

Hi,
Yes it can be possible, you have to maintain SOAP Header.
please see the below links..
How to extract XI-header fields from XI-message in JAVA?
/people/sap.user72/blog/2005/12/11/how-to-apply-themes-in-exchange-infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c50cddbb-0601-0010-92a7-f2a40ca68e6d
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=href%20%20in%20xi&cat=sdn_all
Regards
Chilla..

Data not getting inserted into oracle with theAutoCommitEnabled not checked

Hello Experts
I have a proxy to JDBC scenario.I have 3 SQL statements and the Format is
<DeleteStatement>
<InsertStatement>
<CallStoredProcStatement>.
While excecuting with the AutoCommitEnabled box checked, the insert statement is excecuting and the data is getting updated in the oracle database..But the CallStoredProcStatement is not excecuting.
If the AutoCommitEnabled box not checked,the data is not getting updated in the database .but in RWB log all the SQL statements are getting executed successfully.
Are there any other configurations still to be made in the JDBC adapter.

Hi,
Why you not using single SP to handle all the queries?
BTW, have you used the parameter "logSQLStatement = true" in JDBC receiver channel? It will show in audit log what query is being executed.
Regards,
Neetesh

RFC ADAPTER : Data not getting trasfered to XI

Similar Messages

Maybe you are looking for