RFC adapter Template changed

Hi ,
I happened to change my RFC template by mistake. Could anyone please provide me with the original unchagned RFC ADAPTER template please. It will be really helpful if you can provide me RFC inbound and outbound templates.
Regards
Amit

Amit,
If you still need the original RFC adapter template, give your email id.
KP,
The template is the original RFC adapter properties file that comes along with XI Adapter Engine. You can modify to suit your requirements.
Regards,
Homiar.

Similar Messages

RFC Adapter Receiver - change SAP User for each call

Hi guys,
I need to create one connection between PI and SAP, all right, i can use RFC Adapter Receiver, no problem.
But, for each call i need to use User and Password different, then, I would pass SAP User and Password in my XML Payload.
Can anybody help me, please?

hi,
>>But, for each call i need to use User and Password different, then, I would pass SAP User and Password in my XML Payload.
sure we can help you but no in this way:)
it is possible to change the user for RFC adapter but using
principal propagation:
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
this is the way you need to go and not send password in XML payload
(this is certainly not the way and no client will approve it)
why use a password is anyone can see it ?
Regards,
Michal Krawczyk

Changes don't reflect using BAPI_PROJECT_MAINTAIN through RFC adapter

Hi,
I am working on a Integration Scenario in XI. In this I am executing BAPIs through RFC adapter. I am using BAPI_PROJECT_MAINTAIN to create WBS Elements in Project System. After creating WBS Elements when I try to define the hierarchy, the BAPI calls executes successfully but the hierarchy is not visible when viewed in the SAP WEB GUI.
I am using following parameters to define WBS hierarchy:
*IMethodProject
    OBJECTTYPE = WBS-HIERARCHY
    METHOD = CREATE
    OBJECTKEY =
    REFNUMBER =
    OBJECTTYPE =
    METHOD = SAVE
    OBJECTKEY =
    REFNUMBER =
*IProjectDefinition
    PROJECT_DEFINITION = P-0300-00-04
*IWbsHierarchieTable
    WBS_ELEMENT = WBS-001
    PROJECT_DEFINITION = P-0300-00-04
    UP =
    DOWN = WBS-002
    LEFT =
    RIGHT =
    WBS_ELEMENT = WBS-002
    PROJECT_DEFINITION = P-0300-00-04
    UP = WBS-001
    DOWN =
    LEFT =
    RIGHT =
In normal case the WBS element 'WBS-002' should move below 'WBS-001', but when I execute BAPI with above parameters, the Hierarchy is not visible in the GUI the both WBS Elements remain at root level, even I get '000' as response with no errors.
When I run the BAPI through transaction SE37 with same parameters as above, the changes are visible in the GUI.
Can anyone please tell what am I missing here.
Thanks & Regards,
Ajay

Hi Ajay,
I understand the problem this way, when u do something thru XI you dont see the effect (even if the the transaction is successful), whereas when it done is directly in the R/3 you can see the output.
look into the below
- check if your XI user is having necessary authorisations (you can do this by enabling the trace in ur R/3 - back end system)
- check if you are passing the input properly in the XI. (like field formats, padding characters, prefixes etc)
Hope this helps to fix ur issue
Regards
Vishnu

JCO_ERROR_FUNCTION_NOT_FOUND in RFC Adapter

Hi,
In XI 3.0 RWB Component monitoring, if we check the RFC Adapter we are getting forllowing error.
Sender Channel 'RFC_SMSINVOICE_SEND' for Party '', Service 'PRD' (Internal Name 'RfcServer[RFC_SMSINVOICE_SEND]')
Server data: {jco.server.gwhost=192.168.223.128, jco.server.progid=SMSINVOICE, jco.server.gwserv=sapgw00, jco.server.unicode=0}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=200, jco.client.passwd=*****, jco.webas.ignore_jdsr_error=1, jco.client.user=basis-ltitl*, jco.client.sysnr=00, jco.client.ashost=192.168.223.128}
Current pool size: 1, max pool size : 5
RFC_HISTORY
- Error: 2011-06-30 15:13:47 IST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'ZSD_INVOICE_SMS_FMASYNC1' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
- Error: 2011-06-30 14:58:47 IST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'ZSD_INVOICE_SMS_FMASYNC1' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
- Error: 2011-06-30 14:43:41 IST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'ZSD_INVOICE_SMS_FMASYNC1' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
- Error: 2011-06-30 14:28:52 IST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'ZSD_INVOICE_SMS_FMASYNC1' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
- Error: 2011-06-30 14:13:12 IST: com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template for 'ZSD_INVOICE_SMS_FMASYNC1' caused by: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts!
I'm not sure this is becuase of user 'basis-ltitl', becoz we have changed this used in sender communication channel and tried it. Eventhough it giving the same error.
Could you please help me out in resolving this issue.
Regards,
Baskaran K

Hi Mark,
When I click on 'Cache Status Overview' it says Adapter Framework not register in SLD.
In SLD, I could find 2 entries for all XI components, one is with old name (xiprd) and another entry with new name (mipxiprd). But the entry for the new name does not have the domian assigned. I have manaully assigned domain for new entry (Intetegration Directory on prx.mipxiprd) and made dummy change in communication channel. But the cache notification ended with red state in Cache status overview for adapter framework (af.prx.xiprd). But this is the old name of adapter framework.
I'm not sure why it picking the old name instead of new adapter framework name(af.prx.mipxiprd). Kindly not in SLD, both adapter frame work are present.
If I remove the the old one from SLD, none of the notification going to Adapter Framework.
Kindly help me out in solving the issue. From where the adapter framework URL will be picked up in Integration Directory.
Regards,
Baskaran K

Problems with RFC Adapter, utf-8 encoding and special characters

Hi,
How can I change my enconding UTF-8 for ISO-8859-1 in my RFC ADAPTER SENDER?
Regards,
Sérgio

Hi,
To change encoding of xml you can either use this piesce of xslt after your mapping as a next step
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="ISO-8859-1"/>
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
or use adapter module but now I can't remember name of it.
Best regards,
Wojciech

RFC Adapter Problem: Necessary Roles?

Hi XI Gurus,
Our team is working with a File-to-RFC scenario. We are using a custom RFC, which uses BAPI_GOODSMVT_CREATE within it, to post data for Goods issue, Goods receipt and Transfer Posting. We are using the credemtials of a user, sapxiuser, within the RFC adapter. Can anyone please tell me what are the roles that are to be maintained for this particular user at the R/3 end?
Points will be rewarded!
Thanking in anticipation,
Amitabha

Hi,
Remember to add explicit commit in the communication channel:
"
Commit Control for Individual BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.
"
Regards,
Wojciech

RFC Adapter not getting data

Hi experts!
I am developing a RFC to File scenario on PI 7.1 EHP1 and ECC 6.0 which is synchronous. Following the Help page Setting Up an RFC Destination for the RFC Adapter I created two destinations. The fist one is a TCP/IP, name RFCDE1COMPANY2, program id BAPI_COMPANY_GETLIST and corresponding gateway host and service I found at SMGW (Parameters). The second one is a Logical with name RFCDE1and reference entry RFCDE1COMPANY2.
At my RFC Sender Adapter I configured the same gateway info and the same program id. After that I tested both destinations and it worked. I created the following report to call the bapi on that destinations::
REPORT ZREP_BAPI_COMPANY_GETLIST.
DATA: company_list TYPE STANDARD TABLE OF BAPI0014_1.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
IN BACKGROUND TASK
DESTINATION 'RFCDE1'
TABLES
COMPANY_LIST = company_list.
COMMIT WORK.
At SXMB_MONI the request message was processed and the output file generated, but it has only the root tag. At moni the inbound message has no data (company data).
I tested the BAPI_COMPANY_GETLIST at SE37 and there are 149 entries. When I executed this same BAPI with RFC target sys configured to my destination, it didn´t show any data and has an exception called SYSTEM_FAILURE. I think probably the error is on RFC destinations but I can´t figure it out what is wrong.
Best Regards,
Gabriela

Hi experts,
Thank you all for your quick response.
At the TCP/IP Destination there is a button "Unicode Test", according to this test my target system is unicode (character size 2). I changed the option at MDPM&Unicode on that TCP/IP Destination like Madhusudana described. I also selected the checkbutton "Unicode" on sender RFC communication channel.
About the sync/async, I will not use sync async bridge because this scenario can be async. One think that I realized is that when I call my report, I am implicitly calling PI asynchronously and when I call the BAPI directly by the test tool, I am implicitly calling PI synchronously. That is why most part of my tests did not work before.
Now I can see on SXMB_MONI that the scenario worked and the file was generated. But the data are still not being showed on inbound payload. I think something is wrong with my destinations but I can´t figure it out what is.
Ps.: I would prefer to use XI proxies, but this scenario will be configured (not now) on a XI 3.0 with ERP 4.6 C. Now I´m just learning how to handle with RFC Adapter.
Any ideia?
(Points granted)
Thank you and best regards,
Gabriela

RFC Adapter - Locking Issue

Hi,
Our SAP production environment was down for two days. While it was down the login used by one of my RFC Receiver Adapters was locked. This meant the adapter could not run. Fair enough.
When the Production environment was brought back up the login used by the RFC Receiver Adapter was unlocked. However, I continued to get an error in Runtime Workbench claiming that the login was locked.
Checked with the security team and they confirmed the user wasn't locked.
Just to try something I went into the RFC adapter in question and simply retyped the login/pwd, saved the adapter and activated it. This seemed to clear the problem and it's now running as expected !!
Question is why did this work ? The adapter was saying the login was locked. It wasn't. All I did was effectively resubmit an updated version of the adapter and it worked again, even though no part of the adapter had actually changed. Is this some sort of caching issue ? Any thoughts ?
Cheers,
PaulC.

User was unlocked yesterday and was still giving locked error this morning. It's now working. Just surprised that a new call of an adapter would continue to say locked when it wasn't. Can only think it's some for of caching but this is a pretty unsatisfactory answer. Makes me worry that it might happen again.

RFC Adapter reconnect issue

hi
We have a problem with RFC connection with SAP System on production.
I consuder to change initialRfcClientConnectCheck to false.
But in this case RFC adapter will check connection each time. It is not good for performace.
What doy think is it good practice to have initialRfcClientConnectCheck=false on production system? I don't see another way How to force XI reconnect after shutdown of SAP System.

Hi,
Apart from setting this option there is no other way out.
We have made this change in our production and we have faced no issue in terms of perfromance after setting the parameter!
Regards
Bhavesh

RFC Adapter issue

Hi,
I have a strange behavior from the RFC adapter.
When I submit from a report data via RFC to XI, everything works. If I try it a second time, the RFC call fails. Also a RFC connection test to XI fails.
After restarting the RFC Adapter in the Visual Admin, I can execute the scenario for another time. A second time fails then again.
Does someone know this problem?

Hi Michal,
changed the param initialRfcClientConnectCheck to false. Restart the RFC Adatpter, but I am still facing the same problem.
Sometimes I am facing connection problems with LCRSAPRFC, too. Sometime a connection test is successful, sometimes not.
The error I get is: "CPIC-CALL: ThSAPCMRCV no data received". After a view tries it works again - but for not very long.
Message was edited by:
Chris Sell

How to enable viewing of payload for receiver RFC adapter in RWB

HI All,
We can see the payload of all adapters in RWB by clicking on the message link under component >> adapter monitoirng. However when i click on message link for receiver RFC adapter, it does not show any payload. How can I enable this payload?
Regards

Hey
Sync messages are Cached rather than persisted in RWB to save memory.
You need to change the following parameter in Visual admin to see sync messages in RWB
Service SAP XI AF Messaging:
messaging.syncMessageRemover.removeBody = false
its set to True by default hence it does not stores the messages.
You may have to restart the Java stack after the changes (but first try without restarting the Java stack).
Thanks
Aamir
Pl:You will see the sync messages in Message Monitoring in RWB (not sure if it will show up in Communication channel monitoring as well)

Why is the RFC Adapter so unstable

Hi all,
I have a scenario where an IDOC is sent from the sender system and an RFC enabled Function Module is called on the target system. Sometimes I get an error in the Adapter for no aparent reason. I check the RFC adapter trace file but none of the exceptions was raised and I am not able to see what was the problem.
But, if I restart the RFC Adapter and send the IDOC again, everything's allright. Why? Is there any other trace avilable somewhere? Is there any way to restart the RFC Adapter periodically and automatically?
Thanks and regards,
Nuno

This sounds like a bizarre scenario. Why would a Idoc (asynchronous) be calling an RFC (synchronous)?
Unless the RFC is doing update? Then you have more problems. You are mixing your QoS from EO to BE. The delivery is no longer guaranteed. The posting to the RFC could work but XI may not get the acknowledgement - RFC adapter does not do commit so you must have a commit in the remote function. If no acknowledgement is received, do you resend and risk duplicate updates? How do you guarantee EO delivery? The sender system is right in expecting EO for it's outbound Idoc.
In all the training material RFC is intended for data retrieval, not data posting. This is consistently done with Idoc (EO, or EOIO).
I would consider changing the scenario to Idoc->xi->Idoc.

How does RFC adapter with EO/EOIO work? Kindly help!

Hi Experts,
How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
In my Async RFC - XI scenario sometimes XI is able to receive the messages but sometimes it doesnot even though the sender system is UP and running.
I cannot see any messages in SXMB_MONI even though the sender has sent the messade.
Why RFC adapter is behaving like this? What could be the issue?
Kindly help!

EOIO: How does this queueing work? Does it use FIFO logic?
>> yes it uses FIFO logic in EOIO.
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
>>>noof rfc connections we are using for connecting to XI to RFC minmum is 1 maximum is 50 bydefault. you increase this value by changing the default setting.
How does RFC adapter with EO/EOIO work? Kindly help!
Posted: Mar 21, 2007 4:15 AM
Hi Experts,
How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messages that can be queued?
Also what is the significance of 'Initial connection' and 'maximum connections' in communication channel? I have given the default value 1 for both. What should be the ideal value and why?
Why RFC adapter is behaving like this? What could be the issue?
>>check ur sender RFC adapter. chekc whether data is sent from RFC . see logs in R/3.

Commit Handling In RFC adapter

hi...
Can any one explain what is the commit Handling in RFC Adapter scenario
venkat

Hi ,
From documentation
"Commit Control for Individual BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution."
We have a " Commit Control for Individual BAPI Calls" option in RFC reciever adapter to commit the BAPI.
Sekhar

RFC Adaptive Model,JCO destinations error

HI,
I created the tutorial application to get Flight List using RFC adaptive model.
I created the JCO destinations in web dynpro content administrator after configuring the SLD (after many problems though ).
Our Server is Web AS 6.4 ABAP + JAVA ,but no R/3 modules installed.
WD_FLIGHTLIST_MODELDATA_DEST-type application--single server connection
WD_FLIGHTLIST_RFC_METADATA_DEST-type Dictionary-load balanced
The JCo destinations status shows green.
The test for WD_FLIGHTLIST_MODELDATA_DEST is succesful but the test for WD_FLIGHTLIST_RFC_METADATA_DEST fails with the error:[code]
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=nwserver GROUP=PUBLIC R3NAME=NWS MSSERV=sapmsNWS PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR Group PUBLIC not found TIME Thu Nov 10 18:24:23 2005 RELEASE 640 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 3515 DETAIL LgIGroup COUNTER 2 [/code]
The ping fails and if i test it again,i get another error
[code]com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=nwserver GROUP=PUBLIC R3NAME=NWS MSSERV=sapmsNWS PCS=1 ERROR Group PUBLIC not found TIME Thu Nov 10 18:29:13 2005 RELEASE 640 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 3515 DETAIL LgIGroup COUNTER 1 [/code]
What is wrong?Any more steps required?
If i try to edit it,the type is still the same-Application with single connection.
How can i change it?Do i need to change it to type Dictionary in the first place? How to proceed.
Please guide.
Regards,
Siddhartha
Message was edited by: Siddhartha Jain
Message was edited by: Siddhartha Jain

hi Siddhartha,
You have to configure PUBLIC group using SMLG transaction
check these links out
http://help.sap.com/saphelp_nw04/helpdata/en/28/1c623c44696069e10000000a11405a/content.htm
hope this helps you
Regards
Rohit

RFC adapter Template changed

Similar Messages

Maybe you are looking for