RFC and PI Scenario
Hi PI Guru,
I want to count number of message, which was send from SAP R/3 to SAP PI and the SAP PI send back the number of message and information like send system name, date which will be save in table in sap R/3 and those information coul be read with webdynpro.
Please suggest me for the same.
thanks in advace
Regards,
Hi,
Try Having a look at this:
http://help.sap.com/saphelp_sm32/helpdata/en/87/50cce344ae495bae240add66a28ed7/frameset.htm
Other approach you can try is by calling a ZRFC Lookup(RFC Lookup) in you message mapping. In zrfc program you update the count in a ztable, thus keeping the count of number of messages. This is just a Idea, I have not tried this.
Regards,
Aravind
Similar Messages
-
Hi all,
I need couple of links which explaing me how to do RFC to File(or vice versa) and also Idoc to File scenarios( or vice versa).Hi Sonia,
partner profile:
In partner profile we define the system which are going to communicate between themself and send data ... here we give some logical name for the system which are going to be partners in data communication.we set it using WE20
http://help.sap.com/saphelp_46c/helpdata/en/dc/6b803343d711d1893e0000e8323c4f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
Regards,
Ram
Message was edited by:
Rambadri Madhavarao -
V.V.Urgent( Soap- XI- RFC) and Viceversa
Hi,
I am Integrating Webservice with SAP.
I am Using soap and RFC adapters for this .....
I want the Information from Creating SLD...
How to create logical system for SOAP...
and also for RFC ( Both Sender and Receiver adapters)
Points will be awarded for the answer..
Regards,
jayasimha jangam.Hi !!
Check this out..
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009 --> <b>Troubleshooting SOAP and RFC scenarios</b>.
heck these links related to SOAP and RFC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
regarding HTTP* Errors /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi -
ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3
Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
StevenHi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi. -
RFC Sender and RFC Receiver Sync Scenario . Help required.
Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
RegardsHi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM -
Can you explain steps in the Async and Sync scenarios JDBC to RFC.
Hi,
Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
Like,
The data is picked up from the database table through JDBC adapter.
It is passed on to SAP by calling the RFC. RFC gets executed
successfully. The status is returned by the RFC. The status needs to be
updated back into the SQL database table.
Is this a sync case or async case.
What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
Sooryahi check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
JDBC Synchronous call using BPM
Data Types -
1) File Input
2) JDBC Req
3) JDBC Response
4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
Message Types
4 for each data type
Message Interfaces
1) Async, Outbound, Interface, to receieve the file
2) Async, Inbound , Interface to send the file from XI
3) Async, Absract , Interface of type File message type to recieve the message in the BPM
4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
Message Mapping:
1)Mapping between File Req to the JDBC req
2) JDBC Response to File Response
Interface mapping:
1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
Use corresponding mapping for Req and Resp..
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
Issue in File to RFC to File Scenario with BPM using Block Step
Hi Everybody,
I am doing File to RFC to File Scenario for multiple records using BPM using Block Step. The File Message is getting posted and after that, the message is getting stuck up in the qRFC Monitor (Inbound Queue).
After seeing the message in Inbound Queue, I am trying to execute and release the message. But when i execute the LUW, it says " Function module doesnt exist or EXCEPTION raised" in Inbound queue.
Could somebody suggest me the outcome of this? What does this mean and how to
release the stuck up message in Queue.
Thanks and Regards,
N.Jayanth KumarHi Rajesh,
After going through the blog, i saw the trace messages. It says
" The exception occurred (program: CL_SWF_XI_INBOUND=============CP, include CL_SWF_XI_INBOUND=============CM00F, line: 19)"
Regards,
N.Jayanth Kumar -
File to RFC, and through RFC response i am trying to trigger the Mail adapt
Hi All,
Right now i am doing File to RFC, its working fine but now the requirement is when xi connect to ftp and picks the file need to send one success mail after the file pickup and data sent to BW system again i need to send one mail and also error alerts to inbox.
Till now i am not using BPM, can we do this without BPM pls let me know
now i am trying to achieve this in File to RFC, and through RFC response i am trying to trigger the Mail adapter.
or else i need use only BPM pls share the steps which i need to be configure.
Am i correct or pls suggest me some idea to achive this and also pls share some smaple ones in BPM .
Thanks in advance
VenkatWith BPm, follow this:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Instead of receiving the response in file, use mail adapter
Regards,
Prateek -
RFC destination for RFC to File scenario
Hi,
I m creating a TCP/IP RFC destination in R/3 system for my RFC to File scenario.
Step 1:
For this a Registered server program is created in Jco RFc Destinations with,
Program Id : pgm1
Gateway host : PI's host
Gateway service : PI's service
application server host: ECC's host
system numer : ECC's number
client : ECC's client
logon user : ECC user
password : pwd
Step 2:
In SM59, TCP/IP connection the following parameters are given:
Program ID : pgm1
Gateway host : PI's host -
> is this correct
Gateway service : PI's service -
> is this correct
Step 3:
So i am calling the RFC in ABAP program (R/3 system) like:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
IN BACKGROUND TASK DESTINATION 'Z_HR_OUTBOUND_DATA2'
Step 4:
In PI side,
for RFC sender I am passing :
Application server : PI server
Application server service: PI host
program ID: pgm1 which was created in the previos step
For RFC Metadata Repository Parameter, i am passing all the values related to R/3
Please let me know whether the steps and values i given is correct.
B'cos even if i give ECC's information in Gateway host and Gateway service the scenario works fine and if i PI's info then also it works fine.
so i am confused as which is the correct method. pls clarifyOk I will try to explain....
Assumptions: R3_TO_XI is the name of RFC which I created in ECC of type T.
While creating the RFC in ECC we mention a unique name which is called Progaram ID. Now the same program id we mention in our sender RFC CC.
So now when an ABAP Progarm (where you will call this RFC with it's destination) is scheduled/triggered with the code as mentioned below then since the DESTINATION ('R3_TO_XI') mentioned here contain the same program id which we have mentioned in our sender CC, invokes the adapter in PI and soon after that all pipeline steps get executed in XI.
CALL FUNCTION 'ZBAPI_COMPANY_GETDETAIL'
IN BACKGROUND TASK
DESTINATION 'R3_TO_XI'
TABLES
comp_detail = company_detail.
COMMIT WORK.
Regards,
Sarvesh -
Sender rfc..async rfc to file scenario
Since im new to XI...Can you please give a overview of the whole scenario which meets the requirements... wrapping 1 rfc in another and then passing the final export parameters to a file using XI..
->i refered to Re: XI : RFC Response Mapping
also to the blogs 1438 and 3865.
but the things r so abstract as to how to triggger the rfcs..
Is it like calling the first rfc frm an abap pgm n calling the second one from first ...the only way?? How to achieve this?
->In what cases do we need this wrapping??
Is there any way as to just pass the export parameters of a single rfc to a file using xi.
->Dont know whr to start the scenario to work out...even the mappings are confusing...For implementing Sender RFC: (yet to work on this)
1) We cannot use all the BAPI/RFC as is while doing an Async sender RFC.
2) We should use a wrapper around this BAPI/RFC and it should be a custom RFC again.
3) All the data that you need in XI for mapping should be passed through exporting or tables only.
4) Importing parameters should be commented.
5) Call this custom RFC in BACKGROUND TASK with DESTINATION. COMMIT WORK after calling custom RFC.
6) Create RFC destination with Program ID same as the program ID in your communication channel.
7) Import your custom RFC into repository.
8) Use the custom RFC(request not response) as interface in all your agreements and interface mapping,
message mapping.
That should be all the steps. You should get your data in receiver adapter. -
Hi Forum,
What is a RFC-->XI scenario
When do we configure Sender RFC channel,
Does it mean calling a RFC enabled Function Module in XI from a R/3,
Does it mean executing a Function Module in a R/3 and sending the output to XI,
how do i go about writing a ABAP code for such a situation (pls provide a sample code)
How do i make a message interface in XI for the RFC message coming from the R/3 to my XI
What is the purpose of doing such kind of scenarios
pls help
Edited by: sudeep dhar on May 7, 2008 8:58 AM
Edited by: sudeep dhar on May 7, 2008 8:59 AMHi Sudeep
What is a RFC-->XI scenario
>> It means passing data fior RFC call to XI and XI inturn will pass the data to some other application system.
When do we configure Sender RFC channel
>> We need this when your RFC call is on sender application system and the processing is done on receiver applciation system.
Does it mean calling a RFC enabled Function Module in XI from a R/3,
>> NOP, it doesn't mean calling a function module in XI as XI is just a integration broker it wont process any data.The call is intend for other receiver systems passed via XI.
Does it mean executing a Function Module in a R/3 and sending the output to XI,
>> NOP, it is not passing output to XI.
how do i go about writing a ABAP code for such a situation (pls provide a sample code)
>>Sample code will contain call to the sender message interface in the configured scenario.
How do i make a message interface in XI for the RFC message coming from the R/3 to my XI
>> Import the RFC from the sender system to XI and then you can use that message interface in your scenario creation.
What is the purpose of doing such kind of scenarios
>> This is used when you intend to place a RFC call from a sender system to receiver system, so the processing of the RFC is done on the receiver system.
The main points to be considered while RFC to XI scenario is
1) The RFC destination is TCP and the program name mentioned in the desnation should be registered in though sender communication channel. The program name mentioned in the RFC desnation and sender commnucation channel should be same.
Thanks
Mitesh -
Error Handling on RFC - XI - File Scenario
I have an R/3 RFC -> XI -> FILE scenario that works, but does not adequately handle the error of my R/3 to XI connection being down.
The RFC call is async since I was under the impression that I had to do a "to file" scenario that way.
CALL FUNCTION 'ZXO_SAP2RFC'
IN BACKGROUND TASK
DESTINATION wa-rfc_dest_1
EXPORTING
request = request
rfc_header = rfc_header.
COMMIT WORK AND WAIT.
IF sy-subrc <> 0.
[error handling]
If my rfc destination is down (for example when XI is down), this RFC call is still getting a sy-subrc of '0' (so my error handling does not kick in).
Any suggestions?Hi Keith,
your scenario is working correctly. If XI is down you will find your message queued in transaction SM58, where you can restart it manually. Usually there should be standard job for report RSARFCEX, which is periodicly trieing to restard the message.
Asynchr Call (tRFC) means that your program continues completly undependent from that call.
Make a test: Change temporary the called machine in SM59 destination to senseless value and execute your programm. Your message should be in SM58. Then correct the destination and wait a few minutes...
Regards,
Udo -
Czech letters in RFC- XI-JDBC scenario
Hello experts,
we want to transfer data to a database in a RFC->XI->JDBC scenario. Everything works fine, but when we transfer czech characters, we only see "?" in the database where a "Č" is expected. In the XI system the letters are displayed correctly (before and after mapping).
How can we solve this problem? Is there any setting for this in the receiver CC?
Best regards,
Davidhi David,
try using ![CDATA[]] in your mapping, i mean send value in to the target field as ![CDATA[ Č ]].
Regards,
Karna... -
RFC-XI-JDBC Scenario: Help with RFC code
HI,
I am doing RFC-XI-JDBC Scenario, where I have to poll the contents of my Ztable in SAP to Oracle.
The appraoach i am using here is :
1. Created a FM with import parameters as the fields of my Ztable and without any export parameter or source code.
2. Created a report to call that FM in background. The code of my report is as follows :
************************REPORT***********************************************************
Data: it_zrfc_read_table type table of zrfc_read_table,
wa_zrfc_read_table like line of it_zrfc_read_table.
PARAMETERS: tab_name like DD02L-TABNAME.
Data: l_tabname type DD02L-TABNAME.
At selection-screen.
select single tabname from DD02L into l_tabname where tabname = tab_name.
if sy-subrc <> 0.
message 'incorrect table name' type 'E'.
endif.
start-of-selection.
select * from (tab_name) into corresponding fields of table it_zrfc_read_table.
loop at it_zrfc_read_table into wa_zrfc_read_table.
CALL FUNCTION 'ZRFC_READ_TABLE2XI'
IN BACKGROUND TASK DESTINATION 'ORACLEGIS_RFC_SENDER'
EXPORTING
valve_id = wa_zrfc_read_table-valve_id
equnr = wa_zrfc_read_table-equnr
ernam = wa_zrfc_read_table-ernam
invnr = wa_zrfc_read_table-invnr
groes = wa_zrfc_read_table-groes
elief = wa_zrfc_read_table-elief
gwlen = wa_zrfc_read_table-gwlen
gwldt = wa_zrfc_read_table-gwldt
serge = wa_zrfc_read_table-serge
typbz = wa_zrfc_read_table-typbz.
endloop.
commit work.
NOw my problem is that although I am able to send a table with a single record, but when my records > 1, it is not able to poll.
Please guide me what can be altered in the code or any other suggestion.
Thanks,
PuneetHi,
Instead of calling RFC many times I would:
1) create RFM with only one import parameter
TYPE your_table type
2) call only once RFM in the report:
CALL FUNCTION 'ZRFCNAME'
IN BACKGROUND TASK
DESTINATION 'RFCDEST'
EXPORTING
pt_table = i_table.
COMMIT WORK AND WAIT.
This will also improve the performance.
Regards,
Jakub -
Dear Experts,
I am facing the Following error for RFC to SOAP Scenario, i Tried
1. Full Cache Refresh
2.Delete and create Sender Agreement Again
3.Specifying the Program id Again
yet the Scenario is not Working, could you please help me in Resolving this at the Earliest
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'ISU64', toParty '', toService '', interface 'YGVK_SEND_WS_TO_WS', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_YGVK_SENDER_WS_TO_WS' (channelId f1219fd41be734a2a72cd3ddcb779475)
Regards,
Vijay Karthik GHi,
copy the sender agreement to the same one but in party field
remove the " * " (it has to be empty)
test it and let me know
Regards,
Michal Krawczyk
Maybe you are looking for
-
Can't look at laptop screen without getting migraines - any ideas?
Hi all, I used my last 15 inch macbook pro bought around 2007 for many hours every day without any problems before it recently gave up the ghost. I then purchased the latest 13 inch macbook pro model a couple of weeks ago. However, it seems I can't l
-
Defaulting values in material master creation
Hi, I want to have some filed values to be appeared as default in all the views while creation of material master. By user settings, I can restrict Org level values such as C Code,S Org Distribution Channel etc etc. But how to make field values such
-
I have setup a 2.3DP XServer running Tiger/1047 and it seems to be working fine. This is a stand alone box with accounts imported from our main 2.0 SP XServer running Panther/1039 (both are stand alone). Most of these accounts were taken from a 10.1.
-
WHY WE USE VECTOR NOT ARRAY STRING
Hi I want to know why we use Vector not bufferstring. What is the difference Vector(1,1) and STRING[1][1]? Which one we will prefer? Why we will prefer one of them? Please help me to find out.
-
How to Email Output of Concurrent Program to set of Users
Hi Everyone, I need to create a Custom concurrent program(Nothing but a PLSQL Program) to email the output of a concurrent program run to a set of users with request id as parameter. Please help me...! With Regards VeeJay