RFC\BAPI to login into remote system with user id's in that system

Dear Friends,
I have a requirement to run a job .In that job, i need to login into other remote system with the user id's in that system.
May I know, is there any remote function module or BAPI available.
Let me know how to solve this issue.
Regards,
Madhu..!!

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to login the remote desktop with user id and password using coded ui

we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem?
Thanks in advance ...

Hi Divakar,
As far as I know, there isn’t this feature of remote test in VS2013.
I suggest that you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
benefit others who has the similar issue
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

User cannot connect to backend system with user J2EE_ADMIN.

I am using Rapid Installer to initiate the second part of the installtion "ERP 6.0 EhP 3 Self-Service Scenarios and Automatic Roles". When I get to the J2EE User section to enter the parameters, the user is defaulted to "Administrator" and I enter my password. I click next and get this message "User cannot connect to backend system with user J2EE_ADMIN." Any ideas?

If this is a double stack installation, you need to enter J2EE_ADMIN as user, NOT administrator.
Markus

When i try to open my flash player in system preferences i get the message that system preferences quit unexpectedly while using the flash player plugin.

when i try to open my flashplayer in system preferences i get the message that system preferences quit unexpectedly while using the flashplayer plugin. thanks for any help

The problem has been fixed with the most recent OS X software update.

Black screen after successful login into Remote Session

Hi,
I am having windows 8.1 pro(64bit) and windows 7 pro(64bit) machines using which i am trying to connect to a remote VM with windows 7 enterprise through vpn client 5(64bit). After successful login, BLACK SCREEN with Connection bar is displayed. Ctrl+Alt+End
did not work.
In fact, a strange behaviour experienced. After failing once, i tried again with IP address instead of host name. Bingo, it works well. Then disconnect and try to reconnect, problem repeats. What i mean is, the problem is neither Consistent not persistent.
I am frustrated trying to solve the issue. Blogs, forums, communities.... where ever what ever solutions suggested, tried without any luck. Any help please ? Thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that you facing Black screen issue, but when you tried with IP address you can logon to the remote session but during reconnection issue repeats. Correct me if misunderstand your case.
From last how may days you are facing this issue?
Can you find any suitable error\event ID for this case?
For this firstly please check that you have proper connectivity between systems. Please check that you can Ping successfully to the remote system with IP address and hostname.
Might this issue caused by some stopped service “Desktop window manager session” which stop after RDP login. You can check the status as follow.
1. After the issue appear, please use RDP connect to the computer again and check the Desktop Window Manager Session Manager service status.
2. Then, please restar the computer and check System Event log to check if has a Desktop Window Manager Session Manager service error.
Hope it helps!
Thanks.
Dharmesh Solanki

Getting Login error while working with User Management

Hi,
I am new to EBS and learning to work with 'User Management'.
I have EBS 11i installed on XP.
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
Thanks in advance for any helpful hint.
Regards,
Sohail.

Hi,
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
Also, please check Apache log files for any errors.
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
Thanks,
Hussein

Issue with user mapping and SAP reference system

Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.

Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help.

One user unable to login to OWA - error :" The user name or password that you entered is not valid. Try entering it again." exchange 2007 SP3

Hello Guys,
exchange 2007 SP3
windows 2008 r2
we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
we checked mailbox feature in EMC and owa is enable
checked adsiedit - looks good
we checked allow inheritance - checked
we reset the password and try to login to owa from exchange server , no luck
user can login to her computer and outlook without any issue
we also moved her mailbox to another server
user facing the same issue from office and VPN
any suggestion ?
Thanks
Sandip
sandip

Hello Lynn
thanks for the reply. but I already checked that and allow inheritance already checked .
when user unable to access webmail with error "The user name or password that you entered is not valid"
will it generate any event id on exchange server or domain controller ?
in our case we have mailbox and CAS on different servers
any suggestion .
Regards
Sandip
sandip

HT1937 HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON'T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PL

HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT 5 SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON’T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PLS DO THE NEED FULL

When you post again, don't do it in caps.
They are considered shouting and are much more difficult to read.
Allan

Can't login into Verizon -- ok with Thunderbird, IE, Chrome,Outlook

There is no way that I can login Verizon.net however I have no trouble with other browsers.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Using tab control to login into remote panel

https://decibel.ni.com/content/docs/DOC-7746;jsessionid=82a40f1930d65e9a085c08dd4b26b8dea4b8c3d579a7.e38MaNyPaNePaO0Oc350n6jAmljGr0
I am using the idea in the link as a way to password protect a remote panel. However, there is a problem. After one user logs in, if a second user connects while the first user is logged in, then the second user automatically gets access without having to log in. Does any one have any ideas to force the second (and other additional users) to log in before they can get access?

If they're all accessing the same remote panel, then the current state of the remote panel is what they will all see because that's the state of the VI itself on the remote system.
How are the users accessing the remote panel? If it's through your own local VI, then you could have them log in there?
Maybe the Advanced Programmatic option here could work for you.

Importing into a list with user names into People or group

Hello,
I am creating a SharePoint 2010 site for a Windows 7 upgrade team.
We have several external (to SharePoint) lists that need to be available to the SharePoint site.
List #1 is a list of users, and comes from the company HR system. It has NT login names, email addresses and locality information. (approx. 17500 entries)
List #2 is a list of applications (approx. 1200) and associated users
List #3 is a list of workstations (approx. 20,000) and has basic user details
All three lists will change on a monthly basis as people come and go from the business and we are unable to link directly to each target system.
I am keen to create a self service portal where the Current Logged in User using equals [me] has their own dashboard page and the lists are shown with their own information and any workstations they have.
When I import the list from Excel, all columns are single line or number etc, and I don't see a ready way to map to a column type people of group. This means the filter [me] cannot be used.
Is there any way the current logged in user [me] can filter against information in a list that has been imported ?
Thanks

I may have found a solution to this:
If I use XL to add the domain\ to the username in the Excel sheet prior to import, then use the Current User filter web part, it seems to do the job.
This is a test on a 100 item list, Ill import the rest and see how efficient it is, and perhaps index the NT Username column ?

How to get the Login Id (UPI) of the user who logged in the system?

hi,
I'm having a webdynpro application. In which i want to get the values from the R/3 based on the user who logs in.
so i need to get the UPI(login id) of the user who logs in. how to get the UPI of the user who logged in??
please help me out with the detailed procedure.
Thanks & Regards,
Suresh

Hi Suresh,
Try the following code.
ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                  IUserFactory usf = UMFactory.getUserFactory();
                  IUser iuser = null;
                  IUserListElement userElement = null;
                  int i = 0;
                  while (rst.hasNext()) {
                        iuser =
                              UMFactory.getUserFactory().getUser(rst.next().toString());
                        String email = iuser.getEmail();
                        String fname = iuser.getFirstName();
                        String lname = iuser.getLastName();
I have already used this code for the similar requirement.
regards
Anil

Remote xml with user validation

ok am trying to make a gmail new mail checker (its a hobby) so am gonna parse an atom file (https://mail.google.com/gmail/feed/atom) but the problem is how can java send the username and password to google before accessing the xml file

got it, needs to be encoded hehe

RFC\BAPI to login into remote system with user id's in that system

Similar Messages

Maybe you are looking for