RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

Similar Messages

Error RFC sender scenario :JCO.Server could not find server function

Hi ,
The scenario which am working is as follows:
I already have a report in R/3 that calls a Bapi which is in CRM system, now I want to make this point-point connection through XI(RFC sender-XI-RFC Reciever) with out changing the report (only changing the RFC destination).
I have imported the bapi from CRM to XI , changed the rfc destination(to tcp/ip) that existed in R/3 to point to XI(test connection is working fine) and also created the RFC sender adapter .
Now on executing the report am getting the following error.
JCO.Server could not find server function
Please, let me know where I went wrong.
Should the function module exists on the XI server. If the functional module is not there then I am getting the error if the function module is there in XI then every thing is working fine.

Hi Michal ,
Now my scenario is working . The error <b>"JCO.Server counld not find server function"</b> got fixed by giving the system details that contain the RFC in the adapter metadata parameters in the channel configuration.
Thanks & Regards,
Srikanth.

SAP IGS: JCO.Server could not find server function 'PIGFARMDATA'

dEAR ALL,
Operating System: aix6.0
Database: Oracle 11g
IGS is not getting started.
SM59--IGS_RFC_DEST--CONNECTION TEST is fine
sigs-- IGS_RFC_DEST-- Error is generating " JCO.Server could not find server function 'PIGFARMDATA' ".
Tried starting IGS USING the below command:
/usr/sap/KBQ/DVEBMGS01/exe/igswd_mt -mode=profile pf=/usr/sap/KBQ/SYS/profile/KBL_DVEBMGS01_<Hostname>
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp    3735]
kbqadm> sapcontrol -nr 01 -function GetProcessList
22.07.2014 16:36:48
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2014 07 22 16:33:57, 0:02:51, 8847548
disp+work, Dispatcher, GREEN Running, Message Server connection ok, Dialog Queue time: 0.00 sec, AS Java: ALL processes running, 2014 07 22 16:33:57, 0:02:51, 12976352
rslgcoll, Central Syslog Collector, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 9175214
rslgsend, Central Syslog Sender, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 8585278
DVEBMGS01\exe\ig.sapKBQ_DVEBMGS01, , GRAY, Stopped, , , 13566036
ps -ef | grep igs--all igs process are running
HTTP://<HOSTNAME>:40180---sap igs IS RUNNING
IGS Logs: ( /usr/sap/KBQ/DVEBMGS01/igs/log)
trace File pw_sapbwqa_1.trc
[Portwatcher::Ping] Ping was unsuccessful 3 times
[Portwatcher::Ping] Reconnect Portwatcher
Tue Jul 22 16:54:11 2014
[Portwatcher::Ping] Ping was unsuccessful 1 times
Tue Jul 22 16:54:41 2014
[Portwatcher::Ping] Ping was unsuccessful 2 times
igs vERSION IS Internet Graphics Service 7200.0.7.0
"mux_sapbwqa.trc---tRACE File
Tue Jul 22 16:29:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
*** ERROR => [ListenerRfc::OpenRfc] RfcRegisterServer() returned RFC_COMMUNICATION_FAILURE /
ERROR       partner 'sapbwqa:sapgw01' not reached
TIME        Tue Jul 22 16:29:13 2014
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -10
MODULE      nixxi.cpp
LINE        2896
DETAIL      NiPConnect: 10.10.90.150:3301
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT Connection refused
COUNTER     18
[listenerrfc_ 948]
*** ERROR => [ListenerRfc::Loop] OpenRfc() (IGS.KBQ sapbwqa sapgw01) returned RFC_COMMUNICATION_FAILURE
Still trying... [listenerrfc_ 1007]
Tue Jul 22 16:30:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
trc file: "mux_sapbwqa.trc", trc level: 1, release: "720"
Tue Jul 22 16:39:40 2014
[IgsMux::Initialize] Internet Graphics Service 7200.0.7.1
[IgsMux::Initialize] Platform: IBM RS/6000 with AIX (rs6000_64)
[ListenerRfc::ListenerRfc] Constructed for R/3 NA
[ListenerHttp::ListenerHttp] Constructed for port 40180
*** ERROR => [ListenerHttp::Loop] NiListen on port 40180 failed [listenerhttp 703]
[ListenerHttp::~ListenerHttp] Destroyed for port 40180
[Multiplexer::StartUp]
*** ERROR => [ServerTcpIp::NiServerLoop] Caught a NetError: [NetError] [NiBufListen failed] [ServerTcpIp::NiServerLoop()] [-4]. [servertcpip_ 254]
can you please tel the reason why the IGS is not working
Regards
gayathri.K

Hi Gayathri,
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp    3735]
Just check the process which is using the port
netstat -tupan|grep 40180
With Regards
Ashutosh

JCO.Server could not find server function "ZVERIFY_FILE"

Hi Experts,
I am facing one problem, i have created on TCP/IP connection with connection type T and given it some Program Id.
I have register this Program id On SRM server.
Now from this server i want to call one JAVA file, for that purpose i have installed JCO on the server.
My server file looks like,
import com.sap.mw.jco.*;
//import com.tcs.jns.JSignNS;
//import com.tcs.jns.JSignNSException;
//import com.tcs.jns.CertDetails;
// added by paresh on 16.1.2009
import java.io.FileOutputStream;
import com.tcs.jie.jverify.JVerify;
import com.tcs.jie.jsign.JSign;
public class ds_listener extends JCO.Server {
Create an instance of my own server
@param gwhost (gateway host)
@param gwserv (gateway service number)
@param progid (program id)
@param repository (repository used by the server to lookup the definitions of an inc)
     public ds_listener(String gwhost, String gwserv, String progid, boolean isUnicode, IRepository repository) {
          super("sapdev14", "sapgw01", "DS_RFC", repository);                this.setProperty("jco.server.unicode", isUnicode?"1":"0");
     /** Overrides the default method. */
     static ds_listener serverConnections[] = new ds_listener[1];
     protected void handleRequest(JCO.Function function) {
          JCO.ParameterList input = function.getImportParameterList();
          JCO.ParameterList output = function.getExportParameterList();
          if (function.getName().equals("ZVERIFY_DATA")) {
               try{
                    JVerify JNS = new JVerify();
                    String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
                    //boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
                    //initialize method has to be called before calling any other method of the API
                    String recdSignature = input.getString("SIGNATURE");
                    boolean ret_update = JNS.updateSignature(recdSignature.getByetes());
                    if (ret_update){
                         int count = JNS.getSignerCount();
                         boolean ret_verify_sign = false;
                         while(count > 0){
                              ret_verify_sign = JNS.verifySignature(count - 1);
                              if (ret_verify_sign){
                                   ret_verify_sign = false;
                                   count = count - 1;
                              }else
                                   break;
                         if (count == 0){
                              String decoded_data = new String(JNS.getDecodedData());
                              output.setValue("X", "STATUS");
                              output.setValue(decoded_data, "DATA");
                         }else{
                              output.setValue(" ", "STATUS");
                              output.setValue("Error in Signature Verification. Please check Certificate Validity of every signer.", "DATA");
               }catch (Exception e1){
                    output.setValue(" ", "STATUS");
                    output.setValue(e1.getMessage(), "DATA");
          }else if(function.getName().equals("ZVERIFY_FILE")) {
               try{
                    JVerify JNS = new JVerify();
                    String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
                    //boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
                    //initialize method has to be called before calling any other method of the API
                    String recdSignature = input.getString("SIGNATURE");
                    boolean ret_update = JNS.updateSignature(recdSignature.getBytes());
                    if (ret_update){
                         int count = JNS.getSignerCount();
                         boolean ret_verify_sign = false;
                         while(count > 0){
                              ret_verify_sign = JNS.verifySignature(count - 1);
                              if (ret_verify_sign){
                                   ret_verify_sign = false;
                                   count = count - 1;
                              }else
                                   break;
                         if (count == 0){
                              output.setValue("X", "STATUS");
                         }else{
                              output.setValue(" ", "STATUS");
               }catch (Exception e1){
                    output.setValue(" ", "STATUS");
          }else{
               return ;
Start the server
     public static void startServers() {
          JCO.addClientPool("POOL",3,"200","sisldp","paresh1234","EN","sapdev14","01");
          IRepository repository = JCO.createRepository("REP", "POOL");
          for (int i = 0; i < serverConnections.length; i++) {
               // Server listens for incoming requests from system 1
               // (Change gateway host, service, and program ID according to your needs)
               serverConnections<i> = new ds_listener(
                         "sapdev14",//gateway host, often the same as host
                         "sapgw01", //gateway service, generally sapgw+<SYSNR>
                         "DS_RFC", // corresponds to program ID defined in SM59
                         true, // or false for non unicode listener
                         repository);
               serverConnections<i>.start();
     public static void main(String[] args) {
     startServers();
The file have no error as i have compiled it on server, its listener file given in JCO with some modification.
I have tested the connection from SM59 it's working fine,but when i call my any of the 2 function(ZVERIFY_DATA & ZVERIFY_FILE) defined in my java file then i am getting an error "JCO.Server could not find server function 'ZVERIFY_FILE'" on SRM screen.
Can anyone tell me what can be the reason????
please help, i am in real trouble.

Hi,
This is may be of the wrong FunctionModule name means check in case also,it may be case sensitive.
And check whether it is remotely enabled or not and check the RFC destination.
For more details refer these threads.
JCO.Server could not find server function 'SET_SLD_DATA'
JCO.Server could not find server function
Problems with sender RFC
Thanks.

JCO.Server could not find server function 'CONTROL_RECIPE_AVAILABLE'

Hi Experts,
I've been trying to read some of the topics in the forums to find answers about the error JCO.Server could not find server function but still haven't resolve the issue.
Basically, the scenario is from SAP r/3 to PI 7.1 ehp1 (process integration) system.
All of the aforementioned steps we're done.
R/3 (SAP) end
1.) Create RFC destination (T)
2. ) Indicate the program ID
3.) Indicate the server/hostname
4.) Indicate the sap gateway
Test connection was made and it was successful.
SAP PI end.
Integration Directory (Let me skip from the basics and state directly the setup of my senderRFC)
1.) RFC Comm Channel (set as Sender)
2.) Indicated the server hostname (sending system), sap gateway and Program ID (basically what was indicated in RFC setup in SAP end)
3.) RFC Metadata Repository Parameters (In here I used the details of PI environment)..Created user with SAP_ALL profile..I used system without Load Balancing (Parameter, AppServer, SysNo, Logon User, Logon Password, Language and Client)
I was able to test a message from SAP end but still "JCO.Server could not find server function" was the result upon checking sm58.
Did I miss something from my setup and config?

Hi Michal,
I guess there's a big difference with RFC Server Parameters and with RFC Metadata Repository Parameters.
Note: Im using PI 7.1 ehp1
For RFC Server Parameters it includes:
- Application Server (gateway)*
- Application Server Service (gateway)*
- Program ID*
For RFC Metadata Repository Parameters it includes:
- Load Balancing or no Load Balancing (choices)..in here my choice is no Load Balancing
- Application Server*
- System No*
- Logon Language*
- Logon Client*
- Authentication Mode (Use Log-on Data for SAP System or Secure Network Connection for RFC)
if Use Log-on Data for SAP System it includes:
- Logon User*
- Logon Password*
If Secure Network Connection for RFC it includes:
- Quality of Protection
- SNC Partner Name
Looked onto your blogs mentioned several times, but no information on RFC Metadata Repository Parameters.

RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
Vivek

Hello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
   me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
     EXPORTING
       iv_subrc            = lv_subrc
       iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin

JCO.SERVER could not find the server function

Hi,
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
Please clarify.
Thanks,
Srinivasa

Thanks for the reply,
Yes RFC is in the Sender side.
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST(XI system name)
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST(XI system name)
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
These is what I gave,

JCO.server could not create server function - IDOC_INBOUND_ASYNCHRONOUS

Hello all.
On this platform I have found some threads for the above error we get, but unfortunately the solution was not described in detail.
We get this error in sending Idocs from a SAP 4.7 system to our Business Connector.
Complete error info is :
com.sap.mw.jco.JCO$Exception: (120) JCO_: JCO.Server could not create server function 'ä¥u201Eä½u0192å½u2030ä¹u201Aä½u2022ä¹u201Eå½åu2122ä¹u0192ä¡u2019'
com.sap.mw.jco.JCO$Exception: (123) JCO_: Server repository could not create function template 'ä¥u201Eä½u0192å½u2030ä¹u201Aä½u2022ä¹u201Eå½åu2122ä¹u0192ä¡u2019' caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM GWHOST=CPAAQAT.US.CPO.COM, GWSERV=sapgw01, ASHOST=CPAAQAT.US.CPO.COM, SYSNR=01 LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host 172.20.12.65, service 3301) TIME Fri Jul 15 10:35:58 2011 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODU
Typically the message gets rolled-back and no sender, receiver or message info in visable in the transaction list.
Transaction List
Date TID Sender Receiver Msg Type State Delete
2011-07-14 08:00:19 BST AC140C4150524E1E92E80002 Rolled back
Who can help us.
Thanks in advance.
Marcel

Hi,
ä¥u201Eä½u0192å½u2030ä¹u201Aä½u2022ä¹u201Eå½åu2122ä¹u0192ä¡
looks like a character encoding error. Did you check the Unicode, code page at the RFC destination, and related SAP notes?
Sandra

Server could not find any Meta-Data devices!

Our MDC dropped out and the backups did not engage.
On a reboot of the MDC we were able to mount the volume, but all files (QuickTme movies, FCP projct files) could not be opened with an "unknown file type error".
We shut all the clients down we checked the volume and (cvfsck -nv) and while "dirty" it did not report any errors.
Stopped the volume and ran a cvfsck -w which gave us:
"Server could not find any Meta-Data devices!"
Checking Xsan admin logs shows us:
"PioOpen: no such device.
Fatal: Cannot open stripe group "md" - Operation not supported by device
Fatal: Physio_init failed."
Where "md" is our metadata storage pool.
We shutdown all switches, RAIDS, clients, etc, but bring them all back up and checking with one MDC or another is the same result. Volume will not mount.
All fiber connections seem good, checked in RAID admin and on switch.
Ideas?

AppleCare suggested that maybe a metadata backup could have helped.
http://docs.info.apple.com/article.html?artnum=303371
In any case, we nuked and paved.

CSD Load Data Full completing with Could not find server for data domain Error

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.

OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here.
I run a database on a corporate MS Sql Server (2005) and an ASP application that connects via ODBC. The real world application works fine, however when I attempt to access Stored Procedures from Dreamweaver (on my development machine) I am getting the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.
This only seems to happen on Stored procedures that RETURN a recordset.
system:
Win7
Dreamweaver CS4
Code: VBScript/Classic ASP
SQL Server 2005
Connecting via ODBC: MM_MY_STRING = "Driver={SQL Server};Server=wscxxxxxxxxx;Database=dbsystem;Uid=username;Pwd=XXXXXXXXXXXX"
Stored procedures that do not return a recordset are not an issue.... this has put my development work at a standstill!!
Thanks in advance!

Well, I hate bumps, but I am really running out of solutions. I have now tried to use a system DSN on my development machine and that didnt solve the problem. I just un-installed DW and re-installed it and that didnt solve my problem either.
This is very frustrating, because I cannot use any stored procs that return recordsets... I am stuck... can anybody think of a relatively easy work-around to working in DW w/ recordsets that come from SPs when you cant actually access them?
The really weird thing is, when I build the command, and choose the stored proc, and give it valid input variables, and TEST it from the TEST button, everything works and data is returned as expected. Once I click "OK" and actually add it to the ASP page the recordset that should be visible isnt... and when I click the plus sign in the bindings window I get the error...
Help!!

TA38607 how do i deactivate call waiting while i could not find the call waiting in the Phone folder

how do i deactivate call waiting while i could not find the call waiting in the Phone folder

If you have a CDMA phone, there is no way to deactivate Call Waiting from the phone. You'll need to contact your carrier.

Could not find server

I am trying to create a connection to my server so that I can
start working.
I enter the name of my FTP server, which is
http://dreamhost.com.
I enter my FTP username and password and this little box pops
up that reads:"Unknown host. Contribute could not find server "
http://dreamhost.com". Please check
your connection information or contact your administrator. Oh- I am
also online as I try to create the connection.
Any advice?
Thanks,
liliateal

> I am trying to create a connection to my server so that
I can start
> working.
> I enter the name of my FTP server, which is
http://dreamhost.com.
> I enter my FTP username and password and this little box
pops up that
> reads:"Unknown host. Contribute could not find server
> "
http://dreamhost.com".
> Please check your connection information or contact your
> administrator. Oh- I
> am also online as I try to create the connection.
> Any advice?
> Thanks,
> liliateal
Hi,
Try a ping to this server of yours. And see if it respongs !!
Also see if your user/pass is correct.
-Avinash

Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program

Hi,
Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program Files\NetApp\WFA\jboss\standalone\tmp\wfa\workflow_data\35517.xml"
Netapp case has been raised and confirmed there is no issue with the WFA application, no clue to diagnose the issue.
Execution fails continously 3 or 4 runs then get success, intermittent failure occurs.
WFA version :2.2
OS: Windows 2008
Can someone please help me to fix the issue?
Thanks
Deepak

Parag also pointed out that the BURT number is 833488 which has been fixed in 3.0.Please read the public report for more details. RegardsAbhi

Help~~~Could not find Agent_OnLoad function in the agent library

$ java -agentpath: /home/work/libtest.so SimpleTest
Error occurred during initialization of VM
Could not find Agent_OnLoad function in the agent library:
I'm very sure libtest.so and Agent_OnLoad function are exist.
thanks
nowonder

Yes, this is 32bit version. 64bit looks like this:
java version "1.5.0_10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_10-b02)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_10-b02, mixed mode)Bye,
Tomas Hurka

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Similar Messages

Maybe you are looking for