RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Similar Messages

Intra-company stock transfer between two ERP Systems without SAP APO

Hi,
I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
Does anyone have experience with this scenario?
Thanks & regards,
Oliver

Hi Jagdeep,
Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
Regards,
Oliver

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

How we can integrate ep system with SAP R/3 system

I want to integrate SAP EP(7.0) system with SAP R/3.Can any body guide me the step by step method to integrate the above two system.
How we can configure SLD with J2EE engin?How we can established the JCO connection?
Thanks
Kundan

Hi,
Why don't you use search functionality in SDN? You can get lots of guides. This question is repeated lots of times.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/how%252bto%252bconnect%252bto%252bsap%252br3%252bsystem%252bthrough%252benterprise%252bportal%252b7.0%252busing%252ban%252biview.
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3d7db2e5-0601-0010-4a88-9f3498f8142f
Regards,
Harini S

App.server load balancing for SAP System with 1 PS

Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest Liczki

Hi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM

Integrating SAP System with Third Party Software

Hi,
I am working on an implementation project and need to integrate SAP system with a third party system. SInce I am a functional consultant, I am finding it tough to understand the integration issues. Can somebody explain me how to link up the two systems and what are the various tools available for this ?
Regards,
Rohit

Hi,
Inorder to integrate various systems we have various interface methodologies provided by SAP.
SAP systems use the following interface technologies:
ALE: Application Link Enabling
BAPI: Business Application Programming Interface
CPI-C: Common Program Interface Communication
EDI: Electronic Data Interchange
HTTP: HyperText Transfer Protocol
LU 6.2: Logical Unit Type 6.2
RFC: Remote Function Call
OLE: Object Linking and Embedding
SMTP: Simple Mail Transfer Protocol
SOAP: Simple Object Access Protocol
TCP/IP: Transmission Control Protocol / Internet Protocol
XML: Extensible Markup Language
In general we use ALEs and BAPIs.
The ALE uses IDOCs as the data transfer medium and need various middle ware systems inorder to receive and process these IDOCs.
BAPIs use Remote enabled functions which can be accessed from any platform also using any language ( like JAVA, VB etc).
Thanks and regards.

How to make interconnection between a legacy system and SAP system?

Hi Group,
I have a query on the interconnectivity between a legacy system( non-SAP ) and an SAP system.
The legacy provides data in the form of Files only.
my queries are as under:
1)
how can I make a connection to the Legacy from my SAP system?
2)
what are the different ways by which I can connect these 2 different systems?
3)
I hope there might be a chance of connecting the systems by way of using webservices, in this case what are the things I need to follow inorder to make the connection and get the data from legacy?
please provide me with necessary info on these queries to proceed further.
thanks in advance.
Regards,
Vishnu.

Hi,
U can use the GUI function m modules to fetch the data from legacy systems.
Also With the help of Remote FMs u can get connected to the SAP backgrounds from NON SAP background like Portal.XI is an interfacing tool used to connect 2 SAP or SAP to non SAP medium.
Regards,
Ajit.

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

Installing SAP system with MSCS

Hi,
Anyone can give me the steps for installing a SAP system with MS cluster?
Window server 2003, MS. SQL 2005, SAP ECC6.0
Regards
Chin

Hi,
Refer SAP Installation guide in http://service.sap.com/instguides
I will give an overview about the installation process.
Basic setup of MSCS 5.2 for SAP involves 2 systems, we will name it as node A(First MSCS node) and B(Additional MSCS node)
3 Cluster groups should be created for SAP, Database, Quorum
MSCS should be configured between node A and B, test the cluster by moving the groups between node A and B. Its very important to note that, Quorum disk group should not be taken offline. If its goes offline there are chances of cluster getting crashed.
Steps to be followed for SAP Cluster Installation
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     On the first MSCS node, install the MS SQL Server 2005 64-Bit
             In Cluster Admin, move the disk groups and shared disks to Additional MSCS node.
     On the Additional MSCS node, install the MS SQL Server 2005 64-Bit
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     Install the Central Services Instance for ABAP (ASCS) on first MSCS node.
     Install the Central Services Instance for Java (SCS) on first MSCS node.
     Cluster the First MSCS node
     Install the Database Instance on the First MSCS node
     Cluster the Additional MSCS node
     Install Enqueue Replication Server for ABAP and Java(Optional)
     Install the Central Instance
     Install at least one Dialog Instance
Before starting the installation, make sure that system logged on as Cluster Administrator.
Hope it helps
Regards
KT

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

Integration between an external system and SAP OM

Hi everybody,
I need to integrate an external system with SAP OM, and I would like to know how to do it (idoc? BAPI? other?)
What we need is the following:
1. External system -
> extraction of data changes (Cost center, positions, jobs changes) to an excel file
2. Excel validated by HR administrator
3. Validation of this file -
> creates an Idoc (how do you create it?)
4. This Idoc feeds SAP OM
Regards, and thanks in advance for your answer.
Angie

Hi Pradeep,
Thanks for your answer!
I am fresh in this area of SAP, and I still have questions...
What are the BAPI and Objects to use in this case? (I can't find any for OM)
Thanks again for your enlightenment.
Angie

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

RFC connection between two SAP systems (with SAP router)

Similar Messages

Maybe you are looking for