RFC connection from SAP R/3 to OS400 server

Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.

Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind.

Similar Messages

  • RFC connection from SAP Data services to SAP ECC

    We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
    From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP  gateway and service is name is correct.
    Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
    Thanks in advance for helping to solve the RFC connection issue.
    Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

    I am new to SAP and we have just started work on Data Services.
    I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
    Thanks for your help and time.

  • RSA1 DB Connection from SAP BW to external SQL Server databas.

    Hello,
    I am trying to connect our SAP BW system with SQL Server Source System through DB Connect in transaction RSA1.
    Our BW system is running on Windows and MaxDB platform, therefore have I already added the latest dbmssslib.dll library to the kernel for SQL Server.
    But the connection does not work anyhow, I recieve the error "Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does > exist or access denied." and I am quite sure that my input parameters are correct.
    Therefore I wonder if someone has run into a similar problem and what the problem could be?
    Best Regards,
    Niklas Sandstedt

    Hi,
    I am sorry that my case was assigned to wrong forum.
    That should now have been corrected, however my problem still remains unsolved in one of our systems.
    I found note 178949, which fixed the problem in one system. But even though the system setup seems to be identical, the two systems appears different.
    The following has been done for both systems:
    1. Upgraded kernel to 701 version 111 and added dbmssslib.dll and dbmssslib.pdb files
    2. Created Logical system in BD54.
    3. Tried to create DB connection in transaction DBACOCKPIT.
    In the third step, the setup fails and I receive the following error message when I test the connection:
    Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not > exist or access denied.
    Database error -1
    All profile parameters AL11-directories also seems to be correct in both systems, so both should find the dbmssslib.dll file.
    One issue that I see is in DBACOCKPIT, the checkbox for "SAP Systems with basis release" is unchangeble and marked. This however, I think was changed in the other system automatically when the connection was established successfully.
    Has anyone run into the same problem?
    Best Regards,
    Niklas Sandstedt

  • RFC Connection From SAP to Iseries server

    Hi,
    I wish you can help me wtih this issue.
    We are running ECC 6.0 on iseries v5r3m0.
    We are trying to connect to an other non-SAP V5r1M0 system. We are using OSS note 146624 for this purpose.
    Our first problem is that we cannot copy pgm files to a V5R1 system from V5R3 system. This can be solved with manual extraction kernel.
    However our problem is that we are getting an "SQL Error 0" short dump when we start abap report. What ever the entry in DBCON table is we get this short dump.
    Did anyone configured RFC connection to a non-SAP Iseries system? What methos should we use?
    Best Regards

    Hello Volker,
    it is some time ago, you posted the original message here. I have a follow on question and I hope you can help.
    Apart from the redbook I can't find any documentation about rfc with iseries and that gives some examples but no real explanation about what you are supost to do 
    I followed the rfc example "ILE RPG evoked from ABAP" and I can get it to work, as long as I ask for only one parameter from the ABAP.
    Do you know how to get multiple parameters from ABAP? Just repeating the RfcGetData with different parameters doesn't work. The ABAP will cancel with "no data to receive" on the second parameter.
    Also do you know how to create a rfc-trace for these requests?
    Best Regards.
    Richard la Croix

  • Dbcon connection from sap db2 to external sql server

    Hi ,
    I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as  MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
    Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
    M  *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
      "Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'."  [dlux.c       445]
    M  {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
    B  *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
    How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my  db is DB2  can  we download dbmssslib.so this library and load in kernel file? Is it will work?
    Regards,
    Rai

    Hi Rai,
    This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
    For more details on configuration and troubleshooting refer to below SCN document
    How to access an external Microsoft SQL Server database
    Hope this helps.
    Regards,
    Deepak Kori

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • RFC connection from SAP to AS400 system

    Hi ,
    I am working on a Interface requirement wherein I need to get connected to AS400 fetch some data and update in Shipment Document in SAP at runtime.
    I am thinking about calling RFC but not sure whether it will work or not.
    Has anybody worked on the requirement like this.
    please help me out with this regard.
    thanks in Advance,
    Nitin

    Hi Nitin,
    RFC works other way around. Means you can login from other system to SAP to get the data using RFC. For your requirement you can ALE.
    Regards,
    Atish

  • HTTPs connection from SAP WebAS

    Hello,
    I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
    The iSaSiLk authentication is based on client certificates.
    I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated  with no errors. When testing the connection we're getting the following error message:
    SAP icm log:
    [Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
    [Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
    [Thr 1087400256]      in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
    [Thr 1087400256]     out: sssl_hdl = 0x1a3310c0
    [Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
    [Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
    [Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
    [Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
    [Thr 1087400256]   SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
    [Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: hostname = "<remoteServer_to_be_accessed>"
    [Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
    [Thr 1087400256]   SapISSLUseSessionCache(): Creating NEW session (0 cached)
    [Thr 1087400256] Tue Jan 13 10:10:22 2009
    *[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
    [Thr 1087400256]    session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
      secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
    [Thr 1087400256] >>            Begin of Secude-SSL Errorstack            >>
    [Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
    [Thr 1087400256] <<            End of Secude-SSL Errorstack
    [Thr 1087400256]   SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
    [Thr 1087400256]   No certificate request received from Server
    [Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
    [Thr 1087400256] ->> SapSSLErrorName(rc=-57)
    [Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
    [Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
    On the iSaSiLk server we're getting:
    ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
    ssl_debug(2): Received v3 client_hello handshake message.
    ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
    ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
    ssl_debug(2): CipherSuites supported by the client:
    ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
    ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
    ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
    ssl_debug(2): CompressionMethods supported by the client:
    ssl_debug(2): NULL
    ssl_debug(2): Sending server_hello handshake message.
    ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): Selecting CompressionMethod: NULL
    ssl_debug(2): Sending certificate handshake message with server certificate...
    ssl_debug(2): Sending certificate_request handshake message...
    ssl_debug(2): Sending server_hello_done handshake message...
    ssl_debug(2): IOException while handshaking: Connection closed by remote host.
    ssl_debug(2): Sending alert: Alert Fatal: handshake failure
    ssl_debug(2): Shutting down SSL layer...
    ssl_debug(2): Closing transport...
    From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
    Can anyone give me any suggestion?

    Hello Olivier,
    Thanks for your answer.
    I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
    Filename            SAPSSLSPHTID.pse
    PIN                 <no>
    Signature           X
    Encryption          X
    Profile Parameter
    DIR_INSTANCE                   /usr/sap/XID/DVEBMGS00                       /usr/sap/XID/D00
    sec/dsakeylengthdefault                                                     1024
    sec/libsapsecu                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    sec/rsakeylengthdefault                                                     1024
    ssf/name                       SAPSECULIB
    ssf/ssf_md_alg                                                              SHA1
    ssf/ssf_symencr_alg                                                         DES-CBC
    ssf/ssfapi_lib                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    ssf2/name
    ssf2/ssf_md_alg                                                             SHA1
    ssf2/ssf_symencr_alg                                                        DES-CBC
    ssf2/ssfapi_lib
    ssf3/name
    ssf3/ssf_md_alg                                                             SHA1
    ssf3/ssf_symencr_alg                                                        DES-CBC
    ssf3/ssfapi_lib
    Environment variables
    USER                xidadm
    SECUDIR             /usr/sap/XID/DVEBMGS00/sec
    PSE
    Validity            18.12.2008 19:47:04   18.12.2009 19:47:04
    Algorithm           RSA (OID 1.2.840.113549.1.1.1)
    Test signature
    Signature OK
    Verification OK
    Test encryption
    Encryption OK
    Decryption OK
    As you can see, the cipher algorithm used is RSA. Any suggestion... ?
    An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
    Once again thanks for your answer.

  • Number of remote RFC connections to SAP from third party application

    Hi All,
    We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer  of connections reach the maximum limit.
    Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
    Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
    Thanks in advance for your pointers.
    Regards
    Arun

    Dear Arun,
    Here are the parameter settings which you can do to set up RFC connections to SAP servers.
    http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
    This will resolve all your problems.
    Thanks & Regards
    Vivek

  • Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

    Dears,
    I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
    I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
    ==========================================================================================
    **** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
    Error:  >Mon Jul 14 11:20:24,636<    RfcException: [null]
        message: Connect from SAP gateway to RFC server failed
    Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
    LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
    ERROR       hostname 'cpe1601' unknown
    TIME        Mon Jul 14 16:20:25 2014
    RELEASE     740
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -2
    MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
    LINE        193
    DETAIL      NiHLGetNodeAddr: hostname cached as unknown
    COUNTER     3
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    ==========================================================================================
    This problem happens when my app executes the line:
    JCoServer myServer = JCoServerFactory.getServer(myServerName);
    My system properties:
    jco.client.lang=EN
    jco.destination.peak_limit=10
    jco.client.client=800
    jco.client.passwd=********
    jco.client.user=********
    jco.client.sysnr=01
    jco.destination.pool_capacity=3
    jco.client.ashost=/H/155.56.49.28/H/cpe1601
    jco.server.connection_count=3
    jco.server.gwhost=/H/155.56.49.28/H/cpe1601
    jco.server.progid=VSPAGUE
    jco.server.gwserv=sapgw01
    jco.server.repository_destination=VSPAGUE
    Using SAP Logon i can connect to server cpe1601 system E16 without problems.
    Please, I really need some help, because my knowledge on SAP platform is minimum.

    Hi Markus,
    Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
    As you could see, the host I'm connecting is from SAP RAC Service.
    Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
    System Connection Parameters
    Description: SAP ECC 6.0
    Application Server: cpe1601
    Instance Number: 01
    System ID: E16
    SAProuter String: /H/155.56.49.28/H/
    Below the connection information I received from SAP RAC SUPPORT for testing purposes:
        E16 System:
        SID: E16
        Client: 800
        System Number: 01
        Server: cpe1601
        Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
        User: ********
       Password: ********
       SAProuter String:
       If you don't plan to use SAPRouter at your end,
       /H/155.56.49.28/H/    

  • Crystal report- Connect from SAP gateway to RFC server failed

    Hi All,
    I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
    Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
    Error :
    Logon failed.
    Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
    Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
    Location SAP-gateway on host ply.log.com/sapgw30
    Error timeout during allocate
    TIME ....
    Release 700
    Component SAP Gateway
    Version 2
    RC 242
    Module gwr3cpic.c
    LINE 1996
    Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
    Can you please help us solving this error.
    Thanks
    Chetan

    Hi Stratos,
    The SAP Version is ECC 6.0.
    The below transports have been imported.
    u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
    u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
    u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
    u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
    u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
    Thanks & Regards,
    Chetan

  • Connect from SAP gateway to RFC server failed

    Good day and a happy new year to you all!
    I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
    >>>>>Start<<<<<<<<<<
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
    LOCATION    SAP-Gateway on host bwsys / sapgw02
    ERROR       timeout during allocate
    TIME        Sat Dec 31 13:16:19 2005
    RELEASE     640
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        1785
    DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
    COUNTER     2
    >>>>>>>>>END<<<<<<<<<<<<
    I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
    Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
    What could be wrong or missing in my configuration?
    Regards,
    Joao.

    hi Joao,
    check if oss note 447882 relevant
    you may ask basis for help
    Symptom
    You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
    Other terms
    SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
    Reason and Prerequisites
    The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
    Solution
    Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
    An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
    The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

  • Error: Connect from SAP gateway to RFC Server failed

    Hi
    I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
    Please kindly help.
    Erro: Connect from SAP gateway to RFC server failed.
    Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
    LOCATION  SAP-Gateway on host hostname / sapgw03
    ERROR       timeout during allocate
    TIME Wed Oct 31 05:31:45 2007
    RELEASE 640
    COMPONENT SAP-Gateway
    VERSION 2
    RC 242
    MODULE gwr3cpic.c
    LINE 1795
    DETAIL no connect of TP sapdp03 from host hostname after 22 sec
    COUNTER 3

    Hi K Patil,
    Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
    to make this work you have to make entry in the SLD of your server
    fort that plesae acess this link.
    Re: JCo connection Error
    Re: wt is SLD.. how to do configure it
    Please Reward Points if Helpfull.
    Regards
    Vinit
    Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

  • Connection from SAP ERP 6 to B1i2007

    Hello,
    the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
    The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
    Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
    I thought B1i would register automatically on the SAP with the name of the programm-id entered.
    Do we have to change someting in the tomcat-server or where to find the problem?
    Thank you,
    Peter

    Hello Eddy,
    thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
    And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
    I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
    I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
    Best regards,
    Peter

  • JCO.Server Error while trying to execute a RFC program from SAP

    Hi,
    We are connecting to an external registered server program from SAP via Web Methods.
    The external server program is registered with the SAP Gateway. We have created a TCP/IP RFC destination and are able to connect to the destination successfully via SM59.
    An RFC function is created in SAP and is called using the syntax CALL FUNCTION "/NGN/BAPI_STRE_SEARCH_PROCESS" DESTINATION 'PRDB2B'. We have also handled the COMM_FALIURE and SYSTEM_FALIURE exceptions in the function call.
    We are monitoring the gateway via SMGW and see a connection log to the RFC destination as below
    Number - 10
    LUname - dev01
    TPName - sapgw00
    User - KRAORANE
    Status - CONNECTED
    Symbolic - PRDB2B
    Conversation - 86520353
    Prot - REG
    SAP return code - 0
    CPIC rtn code - 0
    The external program returns results as expected.
    However sometimes the RFC fails and returns the message “JCO.Server could not create server function /NGN/BAPI_STRE_SEARCH_PROCESS”.
    We are not able to figure what exactly is causing this error. Any help will be highly appreciated.
    -Kiran

    Hi,
    Please see the below links..
    JCO.Server Error while trying to execute a RFC program from SAP
    Re: JCO.Servcer could not find server function
    Re: JCO.Server could not find server function 'SET_SLD_DATA'
    /people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
    Re: interfacing SAP with an existing java applications
    http://help.sap.com/saphelp_nw04/helpdata/en/47/80f671ee6e4b41b63c0fe46bd6e4f8/content.htm
    http://www.sapgenie.com/faq/jco.htm
    Regards
    Chilla..

Maybe you are looking for