RFC Connection - Urgent

Hi There
Please anyone can send document for RFC Connections,How to change and maintain username and password.
And also send me the Doc's for Return table.
Please forward to [email protected] or [email protected]
Thansk in advance.
Regards.
Chandu.

To change the RFC user and password you can simply go in SM59.
http://help.sap.com/saphelp_47x200/helpdata/en/22/0424fe488911d189490000e829fbbd/frameset.htm
For Return table:
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/frameset.htm
Take in mind if you have a BI 7.0 you must use a trasformation end routine.
Regards,
Sergio

Similar Messages

Urgent: Break RFC Connection

Hi,
How do I break / disable a RFC connection. Currently, my remote function works fine and data is also fetched. However I want to break the connection and test the program, for getting the appropriate error msg...how do i do this??

Hi vijay,
1. I don't think we can control this thru abap code.
regards,
amit m.

Need to make an rfc connection to R/3 side.

Hi BW experts,
I have an urgent requirement to display data from R/3 system at BW side based on the report value. We were doing RRI call to an ABAP report from a query at BW-side where parameters are passed to same ABAP report on R/3 side.
For this solution, the user should have an access to the R/3 system in order to Jump to the ABAP report. We want to avoid this.
So now the requirement is, user should be able to fetch the data from R/3 for display based on the ABAP report (developed in R/3) without actually logging in the R/3 system.
Can you provide me with some hints on this? This can be done using RFC connection Call but it is again asking for user id and password.
Regards,
Vipul Goyal

Hi Walter,
i had already done this part.
now i had created the abap report in bw-system itself and from there i am calling the remote function module by passing required parametes.
But problem is that it is still asking for username and password whlile login to the R/3 system.
Regarding the trusted/trusting relatonship i dont have access for that.
Can u tell me how this process is followed in extractors as no username and password is asked during extraction process?
and can i follow the same process in this abap program.
and last how to create that special user which you have told in your first reply.

Rfc connectivity & transportation

I want to connect my Bw system to my BI system, for the purpose of migration (upgrade) for this do i have to create a fresh set of RFC connections or do i have to only define a domain in STMS for transporting.
This matter is urgent, appreciate your assistance.
Thanks
George

Hi,
1. You need to create RFC between BW and BI system. (Tcode SM59)
2. Then add BI system details in STMS configuration ie Domain Controller, Once You have added BI system, Then you can transport any request.
Regards,
Srini Nookala

Error RFC Connection

Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist.     Error de conexión
Det.error     / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error     ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error     LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error     COMPONENT: CPIC
Det.error     COUNTER: 6
Det.error     MODULO:
Det.error     LINE:
Det.error     CÓD.RETORNO: 236
Det.error     SUBRC: 0
Det.error     RELEASE: 700
Det.error     TMP.: Tue Aug 31 11:13:57 2010
Det.error     VERSIÓN:

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV   3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

Rfc connection error to saposs

Hi
while testing the rfc connection to saposs msg comes timeout occured
Error: timeout occured
Location : Saprouter 37.11 on SAPDEV
Componenet: NI
Counter : 1460
Return code: -93
Subrc: 0
Release : 640
Version : 37
Plz suggest me.

> Location : Saprouter 37.11 on SAPDEV
is the saprouter running on that box and is that box able to connect/ping sapserv?
Markus

RFC connection error for PS_ACCESS_1 and PS_ACCESS_2

dear all,
i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving 'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
regards,
vicky.

HI,
please check the RFC Trace File at SM59 -> RFC -> Show trace file.
For better tracing delete the Trace File first and recheck the RFC Dest.
Regards,
Gordon

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error between R/3 4.7 & ECC 6.0

Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service 'sapgw01' unknown
M *
M * TIME        Wed Apr 22 03:59:51 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * MODULE      ninti.c
M * LINE        463
M * DETAIL      NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER     2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, Subbu

Hi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service '?' unknown
M *
M * TIME        Wed Apr 22 04:58:46 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * COUNTER     2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details     LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details     DETAIL: NiPConnect2
Error Details     CALL: SiPeekPendConn
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 592
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 8777
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 640
Error Details     TIME: Thu Jun 19 10:42:42 2008
Error Details     VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

RFC-connection error: DETAIL: no connect of TP sapdb02 from host u0085 after 20

Hello!
I face with problem to set up successfully a RFC-connection from SOLMAN to the satellite system.
The network connection here is VPN.
The following error appears, when I execute the connetion test:
Error: Timeout during allocate
LOCATION: SAP-Gateway on host /sapgw03
DETAIL: no connect of TP sapdb02 from host after 20 sec.
COMPONENT: SAP-Gateway
Has some one any ideas how to solve this problem?
Thank you very much!
regards
Thom

Hi,
Did u get this issue sorted out.
Let me know if you did mate..
I think its some thing to do firewall port..
Thanks
James

RFC Connection error message while Debug the running WebDynpro app

Dear friends,
I am trying to debug WebDynpro application.
After configuring the NWDS with the J2EE server instance, I try to run the WebDynpro application, which I want to debug.
I did selecting the application and run after putting breakpoint at a button click.
But the webdynpro application uses 2 JCo destiantions, and so it gives JCOClientConnection for logical System: ... Please assure that you have configured the RFC connections and/or logical system name properly for this model! message.
If I run the same application from the portal, it doesn't give such error message.
Can anybody help me how can I run the WebDynpro application for debug purpose without getting this error message?
Thanks and regards,
Lakshmikanthaiah

Hi,
are you running the application on the same server? Or are you using the Debugmode on your local installation.
If so, you should check the JCO Destinations on you local server.
<a href="http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole">http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole</a>
Regards,
Dennis

RFC Connection - Urgent

Similar Messages

Maybe you are looking for