RFC connexion between R3 and CRM
Hello,
I have created a RFC connexion between My R3 (HF1CLNT300) and CRM(
HF6CLNT300) using SM59..
but when i test it i have the this :
Test connexion HF6CLNT300
Type connexion Connexion R/3
Interr.
Do you know what does mean Interr.?
have i to install any special plug-in before doing all this?
thnx
Message was edited by:
Mouss Blackman
Hi Abhinav,
There are multiple ways to do this. If you want to stop the overall middleware flow, you can do it in MW_MODE transction code. If you want to stop the flow for a particular system, you can do that in SMQS transaction.
Regards,
Karthi M R.
Similar Messages
-
Optimize the performance of the RFC call between ECC and CRM
Hi,
We are planning to extract sales orders, sales activites and service orders to dispaly it on the PDF factsheet of the account.
As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to optimize the performance of the RFC call between ECC and CRM.
Thanks in advance,
Vamsi.Hello,
[SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
Hope it helps
Joaquin -
Communication between ECC and CRM
Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-VishalHi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal -
Any SAP Note for RFC Error between BI and ECC 5.0
Hi..
the RFC Destination between BI and ECC 5.0 is giving errors.
Plz let me know if there is any Support pack or any solution to fix this error.
thanks..Hi,
pls find the RFC connection details
1 Prerequisites
1.1 User Roles
Use
With the Building Block Connectivity a configuration role for each component is provided to access all transactions relevant for the installation. The following roles are available:
Technical name Description File name for upload
B02_01C B02 - Connectivity Configuration Role (SAP R/3) B02_01C.SAP
B02_03C B02 - Connectivity Configuration Role (SAP BW) B02_03C.SAP
C71_04C B02 - Connectivity Configuration Role (SAP CRM) C71_04C.SAP
B02_04C_SRM B02 - Connectivity Configuration Role (SAP SRM) B02_04C_SRM.SAP
Procedure
Please upload the necessary roles and add them to your user, using transactions PFCG (Role Maintenance).
2 Local Settings
This chapter describes all local settings that are necessary for each component like SAP R/3, SAP SCM, SAP BW, SAP CRM or SAP SRM.
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu Define Client Administration (SAP R/3)
Transaction Code SCC4
SAP R/3 Menu Tools Administration Administration Client Administration Client Maintenance
Then carry out the following steps:
1. Choose Display Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
u2022 Automatic recording of changes
u2022 Changes to Repository and cross-client Customizing allowed
u2022 eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code SPRO
SAP R/3
IMG Menu Basis Components (for R/3 Enterprisse: SAP Web Application Server) Application Link Enabling (ALE) Sending and Receiving Systems Logical systems Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
where XXX is the system name
and NNN is the client.
5. Save your entries.
A transport request for Workbench appears.
6. Select an existing request or create a new request, if necessary.
A transport request for Customizing appears.
7. Select an existing request or create a new request, if necessary.
2.1.3 Assigning Logical System to Client
Use
The purpose of this activity is to make an assignment for the logical system. Skip this activity if a logical system is already assigned to your client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Assign Logical System to Client
Transaction Code SCC4
SAP R/3 Menu Tools Administration Administration Client Administration Client Maintenance
2. Choose Display ® Change.
3. Confirm the warning message The table is cross client.
4. Select your R/3 client and choose Details.
5. Enter the name of the logical system of your SAP R/3 client.
6. Save and confirm the warning message Be careful when changing the logical system.
7. Choose Back twice.
2.1.4 Creating an RFC User (SAP R/3)
Use
To enable communication between the SAP R/3 back-end system and the SAP SCM System, you have to create an RFC user in the SAP R/3 System.
The RFC user in the application client enables multiple RFC connections. Skip this activity if an RFC User has already been created.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Creating an RFC User (SAP R/3)
Transaction Code SU01
SAP R/3 Menu Tools Administration User Maintenance Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
SAP_NEW
S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
2.3 SAP BW
2.3.1 Define Client Administration
Use
This activity defines changes and transports of the client-dependent and client-independent objects.
Procedure
1. To perform this activity, choose one of the following navigation options:
SAP BW Role Menu Local Settings ® Define Client Administration
Transaction Code SCC4
SAP BW Menu Tools Administration Administration Client Administration Client Maintenance
2. Switch to change mode.
3. Select your client.
4. Choose details.
5. In field Currency enter the ISO-code of the local currency, e.g. USD or EUR.
6. In field Client Role enter Customizing
7. Check the settings for changes and transport of client-specific objects and client-independent object changes
If you want to use the settings made by BC-Sets or manually in other systems (other than BW), u201CAutomatic recording of changesu201D and u201CChanges to Repository object and cross-client Customizing allowedu201D is required.
Result
Client administration has been defined to support the installation using Best Practices.
2.3.2 Defining a Logical System for SAP BW (SAP BW)
Use
In this step, you define the logical systems in your distributed system.
Prerequisites
Logical systems are defined cross-client. Therefore cross-client customizing must be allowed in your client (this can be checked in transaction SCC4).
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Defining a Logical System for SAP BW (SAP BW)
Transaction Code SPRO
IMG Menu SAP Reference IMG SAP Customizing Implementation Guide SAP NetWeaver Business Information Warehouse Links to other Systems General Connection Settings Define Logical System
1. A dialog box informs you that the table is cross-client. Choose Continue.
2. On the Change View u201CLogical Systemsu201D: Overview screen, choose New entries.
3. On the New Entries: Overview of Added Entries screen enter the following data:
Field name Description R/O/C User action and values Note
Log. System Technical Name of the Logical System Enter a name for the logical BW system that you want to create
Name Textual Description of the Logical System Enter a clear description for the logical BW system
4. Choose Save.
If a transport request for workbench and customizing is displayed choose existing requests or create new requests.
If you want to continue with the next activity, do not leave the transaction.
Result
You have created a Logical System Name for your SAP BW client.
2.3.3 Assigning Logical System to Client (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW
Role Menu Assigning Logical System to Client (SAP BW)
Transaction Code SCC4
SAP BW Menu Tools Administration Administration Client Administration Client Maintenance
1. In the view Display View "Clients": Overview, choose Display. Change
2. Confirm the message.
3. Select your BW client.
4. Choose Details.
5. In the view Change View "Clients": Details, insert your BW system in the Logical system field, for example, BS7CLNT100.
6. Save the entries and go back.
2.3.4 Opening Administrator Workbench
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Modeling Administrator Workbench: Modeling
Transaction Code RSA1
1. In the Replicate Metadata dialog box, choose Only Activate.
2. If a message appears that you are only authorized to work in client ... (Brain 009) refer to SAP Note 316923 (do not import the support package, but use the description under section Workaround).
2.3.5 Creating an RFC-User (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Creating RFC User
Transaction Code SU01
SAP BW Menu Tools Administration User Maintenance Users
Then carry out the following steps:
1. On the User Maintenance: Initial Screen screen:
a. Enter the following data:
Field Entry
User RFCUSER
b. Choose Create.
2. On the Maintain User screen:
a. Choose the Address tab.
b. Enter the following data:
Field Entry
Last Name RFCUSER
Function Default-User for RFC connection
c. Choose the Logon data tab.
d. Enter the following data:
Field Entry
Password LOGIN
User type System
e. Choose the Profiles tab.
f. Enter the following data:
Field Entry
Profiles SAP_ALL , SAP_NEW and S_BI-WHM_RFC
g. Choose Save.
Do not change the password of this user as it is used in RFC connections.
2.3.6 Define RFC-USER as default (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Role Menu Define RFC-USER as default (SAP BW)
Transaction Code RSA1
SAP BW Menu Modeling Administrator Workbench: Modeling
1. On the Administrator Workbench: Modeling screen choose Settings Global Settings.
2. In the Global Settings/Customizing dialog box choose Glob. Settings.
3. On the Display View u201CRSADMINA Maintenance Viewu201D: Details screen:
a. Choose Display Change.
b. Enter RFCUSER in the BW User ALE field.
c. Choose Save.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy -
Need to syncronize the Regions between ERP and CRM
Hi MW gurus,
I didn't find a adapter object to synchronize the 'Regions' between ERP and CRM. The regions are stored to the table T005S in ERP and the same table exists in CRM too.
Will any one of you adivce on how to sync. these two tables using a replication object?
Thanks,
RajDear Friends,
Start initial load of object "DNL_CUST_BASIS5"
Refer:
http://www.scribd.com/doc/33952988/Download-Country-Region-V-T005S-From-R3-to-CRM-2007-06Jun2010
Thanks & Regards,
Rajagopal
Chennai - INDIA -
Remove RFC calls between SRM and ERP
Hi,
Did any of you ever worked on removing RFC calls between SRM and ERP systems?
Does SAP maintains a lost of these built-in RFC calls?
What are the known constraints to replace them by webservice calls ?
Thanks
YannHi Yann,
There is nothing on the SAP database for SRM and the backend using webservice.
There is for connections to SRM catalog.
I haven't heard anything about plans to change this.
Hope this helps,
Kind Regards,
Matthew -
Use PI between J2EE and CRM for JCO/RFC?
Hello,
I have a question concerning the use of PI RFC-Adapter:
is it possible to use PI as an intermediator between a Netweaver J2EE System which connects to another system (eg. ABAP) using JCO/RFC (giving the following setting:
[NW Java -> JCO] -> [PI] -> [RFC-Receiver-System]
To be more specific, we plan using CRM eCommerce Shop. This Java based shop connects to CRM backend using JCO/RFC. The Java based shop needs to be placed in a different network zone than CRM system and the only (allowed) way to have a connection from the zone with the shop is through PI.
Best regards,
ManuelHello Rajeev,
yes, this would be the best way - but unfortunately the policy does not let us connect directly using jco/rfc. Only ways using PI (decentral advanced adapter engine) are allowed.
Is this possible to use PI to transfer the jco/rfc requests between the two network zones or does PI not support this scenario?
Regards,
Manuel -
Replication of text determination (business partner) between ERP and CRM
Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
AndreasAndrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj. -
Connexion between Ipad2 and Apple TV
I try to establish connexion between my Ipad2 and Aplle TV but I'mm not able to receive any picture but only sound ?
Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip. -
Ad hoc connexion between MBP and Canon WFTE2
Hi there
Impossible to make an ad hoc wifi connexion between my computer and my Canon wft (wifi files transmitter), at the begining everything goes fine , computer find my camera and camera find my computer , when I connect both ; I'm losing the connexion...
When are you about to fix this, I have a MBpro 15" and a Mac Pro , I 'm photographer and I need this to work, by the way it's working fine on my windows mini computer.......If some photographers here, please tell me about your experience with this..
Best regards
studiophoto1Hi,
So you're connecting your computer to the wireless, then putting a cable from the computer to an other device, if I'm understanding correctly.
Did you see if both devices generate IP address's?
I'm sure if you call Canon, they will be able to help you.
Bonne chance. -
Hello SAP experts !!
I have been requested by my client to look at the integration between SCM ( APO) and CRM 7. I have looked at the SAP help files and I am familiar with CRM - however the information is not enough for me to perform a proto type that client will accept going forward
Can you assist?
RajHi
The integration between SCM (APO) and CRM is mainly for AVALABILITY CHECK and AVAILABILITY with ALLOCATION scenarios. (ATP against allocation)
This SAP Note -719627 will be useful.
Regards -
Choice between BI and CRM/SRM-Technofunctional.
Hi all,
Please tell me marketwise and onsitewise which one is better between Netweaver-BI
and
CRM/SRM functional-ABAP (i.e. technofunctional with higher modules)as i am an ABAPer .
Thanks.llll
-
Integration between APO and CRM Trade Promotions Mgmt
I'm looking for a clear description of how to integrate APO and CRM Trade Promotions Management.
Can anyone advise, please?Hi Group APO,
You can follow the below link
http://help.sap.com/saphelp_scm70/helpdata/EN/45/80dd3f92c4f306e10000000a1550b0/frameset.htm
Also Check SAP note 596261 which will surely helps you
Regards
R. Senthil Mareeswaran. -
Replication of Pricing Conditions between ECC and CRM
Hi All
I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
Thanks in advance
Best Regards,
Ram SushanthHi Chandra and Swaroop
Thanks a lot for your response.
From your replies, now, this is my understanding (Pl correct me if am wrong)
1. Replication of Pricing Procedure from CRM to ECC is possible.
It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
Thanks in advance
Best Regards
Ram Sushanth -
Issue in RFC communication between ECC and PI
Hi Experts,
We are upgrading our systems from SAP R/3 to SAP ECC. We have couple of synchronous interfaces between SAP ECC <-> SAP PI <->Webservices.
In R/3 these interfaces are working as expected and passing the data in correct format to PI. But same RFC in ECC is not passing correct data to SAP PI.
Our design is : ECC creates an IDOC and then from the port program it calls the RFC to send data to PI. I tried debugging this port program and until the RFC data is correct in the tables, but as soon as RFC hands over data to PI, data is getting messed up.
Below is the example.
Data in RFC : has data like this
TES_TRANS_NO MATERIAL UNIT QUANTITY SHIP_DATE
1003 MMT-XXX EA 1 20140722
But when data comes to PI it is something like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:ZIDXF_WS_ORDER_STATUS xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<ORDER>1003</ORDER>
- <ITEM>
- <item>
<TES_TRANS_NO>1003</TES_TRANS_NO>
<MATERIAL>EA 1 20140722</MATERIAL>
<UNIT_MEASURE />
<QUANTITY />
<SHIP_DATE />
</item>
</ITEM>
</rfc:ZIDXF_WS_ORDER_STATUS>
Material number is not being mapped and all other remaining fields are being concatenated somehow and being mapped to Material.
Please help if anyone has any ideas.
Thanks,
SameerIssue resolved:
RFC Destination was Non-Unicode in R/3, for ECC we changed it to Unicode (As PI system is unicode), and it worked.
Thanks everyone.
Sameer
Maybe you are looking for
-
How can i remove my primary apple id
I have 2 email address in my apple ID my apple ID & primary email address is: ***@yahoo.com & my alternate email addresses is: ***@me.com my alternate email was created using the primary email in iCloud Setting. but now, I want remove this yahoo em
-
Can't set intial value for cRIO boolean shared variable
LabVIEW 8.0 gives me a configuration error when I try to force an inital value for a Boolean shared variable in my cRIO library. Is that a bug, or am I overlooking some (probably obvious!) limitation of the cRIO hardware? Jeff Climbing the Labview l
-
Report Generation to PDF File Fails
Has anyone else encountered anything like this. I have a report (Oracle Reports 10g) that's fairly straight-forward; the query basically joins a couple of tables and utilizes maybe a dozen Function Columns. For smaller units within my organization it
-
Printing from desktop suddenly stopped
printing from desktop suddenly stopped 2 days ago; remote printing still works perfectly; desktop shows printer "uninstalled." Print doctor says the printer and desktop are connected to different routers, but nothing has been changed; the issue simpl
-
Hi! I have trouble with connection to my smb server on debian. When I try to connect from "connect to server" menu, I get this error: URLs with the type "smb:" are not supported". Now I can connect only with bash command. But few days ago all worked