RFC DeliveryException: error
Hi,
I am working on <b>DB2(Asyn)-SAP(Sync)-DB2(Asyc)</b> using BPM. I do understand based on the SAP notes 730870 that the either the XML-RPC format or the parameters to the funcation module might be incorrect.
In my message mapping from JDBC to RFC under the <u>message tab </u>of the mapping screen I have 1 for JDBC occurances and 0..unbounded for the RFC as I will be selecting multiple rows from db. Currently in the MI mapping I have source and target as 1 occurances each, when I change the occurances in the target side to "0...unbounded" I do not see the response when I read the interfaces.
In this case do I need to change any thing in my BPM and is this causing this error ?
Bye the way my BPM is : Receive- Synch Send - Send.
<b>Error from SXMB_MONI:</b>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null></SAP:AdditionalText>
Appreciate your help in resolving this error.
Thanks
Steve.
Message was edited by: Steve Holland
Krishna,
When I changed the occurances to 1 and 1:1 mapping and tested MM using the payload from MONI, I am not getting any output at all.
Test result says <b>cannot produce the target element(first element)</b>.
My source structure based on the db is
SOURCE_DT
<Rows> --- 1..unbounded.
<field1>
</Row>
When I tried the rows of multi-occurance with 1:N mapping and I had the RFC execution error, but mapping was working.
Thanks
Steve
Similar Messages
-
Hi all
I am doing RFC --XI ---RFC scenario.
I am using the RFC " FI_ACCT_DET_HR " in sender and revceiver . This RFC doesn't have return parameter but its RFC enabled.
we i execute the scenario i am getting dump in the R/3 and system error in XI.
The payload
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter with name RETURN not found.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any help will be greatfull.
ThnzCheck this thread have same error
Treating BAPI return in RFC Receiver Adapter
Test Your BAPI function working properly
http://help.sap.com/saphelp_nw04/helpdata/en/a5/3ec9924ac011d1894e0000e829fbbd/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/df/0495dbbd6f11d1ad09080009b0fb56/frameset.htm
Edited by: Dharamveer Gaur on Sep 16, 2008 7:15 AM -
Hi
Im doing a File-RFC-File scenario wothout BPM.
Getting the following error in RFC reveiver Adapter
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=<host ip address> SYSNR=00 GWHOST=<host ip address> GWSERV=sapgwXX SAPROUTER_STRING=<SAPRouter String is here> PCS=1 LOCATION SAProuter 37.0 on gareweb ERROR timeout occured TIME Mon May 11 20:52:21 200 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -93 COUNTER 425487</SAP:AdditionalText>
Your help is needed
thanks
keerthiKeerthika,
Error : 500 ->Internal Server Errors
Generally this is due to Server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Check your SAP details again on the Receiver CC, check for your authorizations ( go to R/3 and try to execute the RFC with the logon details you gave in the CC )
Check the logon details you gave in the RFC
Check if the adapter engine is up and running, to isolate this send other scenario which was working..
Also, check the following.
File->XI->RFC (Error: Received HTTP response code 500..)
Re: HTTP response code 500 : Error during parsing of SOAP header
HTTP response contains status code 500 with the description Internal Server
Received HTTP response code 500..
Venkat. -
hi all,
I am doin a http to rfc scenario.In moni it is showing a mapping error in the request mapping and showing this error.In IR my mapping is working fine but in payload runtime i found the error is because it is showing <?xml version="1.0" encoding="UTF-8" ?> twice.Below is the payload message
<i><?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Lspm_Request_SampledueGrid_MT xmlns:ns0="http://satyam.com/xi/LSPM">
<KUNNR>100000</KUNNR>
<FROM_DATE>15.11.2006</FROM_DATE>
<TO_DATE>10.12.2006</TO_DATE>
- <EQUIPMENTID>
- <item>
<EQUIPID>wb</EQUIPID>
</item>
</EQUIPMENTID>
+ <LOCATIONID>
- <item>
<LOCID>1</LOCID>
</item>
</LOCATIONID>
- <OILID>
- <item>
<OILID>BP260</OILID>
</item>
BP260
</OILID>
</ns0:Lspm_Request_SampledueGrid_MT></i>
I tested using view source code and removing the extra ]<?xml version="1.0" encoding="UTF-8" ?> in IR and it is working fine.
Now my problem is how to rectify this error can anyone help me out please??
thanks,
Nisheetahi,
I tried to post the XML in the http page without the header and now it it showing a new error
Result:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)</SAP:AdditionalText></SAP:Error>
http://cgnsap27:8000/sap/xi/adapter_plain?namespace=http%3A//satyam.com/xi/LSPM&interface=Lspm_SampledueGrid_Syn_MI&service=SATYAM_LSPM_BS&party=&agency=&scheme=&QOS=BE&sap-user=shailesh&sap-password=shailesh&sap-client=100&sap-language=EN
wat does this mean??
nisheeta -
hello experts
I am sending a message WS2RFC and recieve an error message that return from the RFC.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date '03042008' has a wrong format at field DATUM: Unparseable date: "03042008"</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
any ideas what it is and how to solve it?Hi,
Looks like you have passed data in wrong format to RFC input parameter.
Your format: DDMMYYYY (03042008)
Expected: YYYYMMDD
I would use a graphical mapping function "DataTrans" to convert date format from DDMMYYYY to YYYYMMDD.
Regards,
Jakub -
RFC adapter Error - any ideas what might be wrong ?
An RFC receiver adapter, ends in the following error. See below
No SNC was entered or used on Comm Channel, User exists, and is OK.
No idea why tickets SSO ticket is involved, this RFC with no SNC.
What setting to change or how to fix jco pool issue.
Any ideas?
regards
Phil
<b><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket received</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error></b>HI Phil,
For more information about JCo pool, follow parge 10 of this link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
Also
refer to the SAP Library under SAP NetWeaver
>Application Platform (SAP Web Application Server) > Connectivity >Components
of SAP Communication Technology > Communication Between ABAP and Non-ABAP
Technologies > SAP Java Connector > SAP JCo Client Programming > Establishing
Connection to an SAP Server ® Connection Pools, or refer to the help of the SAP
NetWeawer Developer Studio for the description of the class JCO.Pool under SAP
NetWeaver Developer Studio Documentation ® SAP Web AS for Java Applications >
API WAS > Java Connector > com.sap.mw.jco > JCO.Pool.
Regards,
Sumit Gupta -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
RFC Connection Error during Web AS ABAP Database Instance
I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.try moving all your install disk onto local file system then rerun the install. That might work....
-
(Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.
Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
HiteshHi Hitestwar,
Try these notes as well
1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
Or try to set logs on the server and check what is happening.
Thanks,
Vivek -
RFC destination error while importing a client request
Dear Experts,
We are trying to import a Client Export from our Prd system to Development System and we are unable to import the request as it pops up a RFC destination error.
We have checked the RFC in the Dev QAS and PRD related to TMSADM and all of them are working fine
FYI, We are able to release the transports from the development system and it can be moved till qas and prd . So the TMS Configuration is also good.
The data file and co file in the backend of development is the same size as that of the Prd system.
I am really stuck . Kindly suggest a solution . Please find the screenshots while importing
Regards,
Suratharajan .SHi Suratha,
Goto STMS->system overview and select the Communication tab.
Maintained the Instance number of the ASD system.
Once you maintained the instance number , you will able to see it in the RFC ASD.DOMAIN_ASD.
Also distribute the configuration after entering the instance number.
With Regards
Ashutosh Chaturvedi -
hi guys,
our company has SAP servers in location A which often communicates with servers in location B. recently we moved both DEV and PRD servers to location C from A. the servers from B and C communicates via a VPN link.sequel to this movement we changed the IP configuration of all the systems. presently users in location B can access the PRD server in C but are not able to access the DEV server.
the following error messages appears:
ON PRD
TMS Alert viewer
transport control program tp ended with error code 0212
error:could not access file as supposed
command:SHOWBUFFER PRD PF=
SAPDEV\sapmnt\trans\bin\TP_DOM
while on DEV
message:RFC-communication failure
RFC communication error with system/destination
partner not reached
would appreciate if u culd profer a solution as soon as possible
Regards walataHi Walat,
User access problem :-
You located at location B are not able to access server DEV which is located C
Pls take help from your system administrator for doing below task if you are not aware about output
From location B try to telnet server DEV on port 32<NN> or 36<NN> ( <NN> is your instance no of DEV )
for e.g
from command prompt run the following command
telnet < dev server ip > 32<NN>
check the ouput
How to check the ouput
1 after giving the above command, if you get blank screen it mean ports are open
2 after giving the above command, if you get ouput on screen like " conneting to server < dev server ip > it mean ports are not open
If the ports are not open then inform you network team that port mention aboev should be open for users.
once the ports get open check above step again , if you get the blank screen , then you wil be able to login to SAP
Server to Server Access problem :-
From server DEV to PRD and vice versa check whether you can share the drives .
if yous system team that yor PRD system should be able to to access the share folder sapmnt of server DEV ( SAPDEV )
As well as check server to server port 33<NN> is open or not
Any query pls reply.
Thanks
Anil
Maybe you are looking for
-
hi, I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it th
-
My aperture 3.0 doesnt show up in the software update
How can i force my A3 to update - it wont let me download it because it says i need A3 installed --(and it definately IS) and it doesnt show up when using software update either. What file is missing to get this to do it and how do i fix it? - i trie
-
How should i increase over all buffer hit ratio.....
Hi all, As shown below if my DB2 databse buffer Qulaity is low .. How should i increase over all buffer hit ratio.. Please advice on any sap standrd notes or procedures Number 1 Total Size
-
Setting permission using java code
hi all i am writing a code to upload file from the users to the server. i can write the files to the server but after that i cannot change it's permission to read and execute by all. only the server can read and execute it. i talked about this proble
-
Advanced Data Grid and Beta 3 Error:1502
hi, When i upgraded from beta 2 to beta 3 .I get a error as follow: Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds. at mx.managers::CursorManager$/getInstance() at mx.core::UIComponent/get cursorMan