RFC Destination Between R/3 and XI Not Reestablishing
I have an RFC destination set up in R/3 so that calls can be made to our XI system. Everything works fine until our central SLD goes down for maintenance,etc. When the SLD is down, the RFC connection is lost. I assume this is by design. The problem is that once the SLD comes back up, I would expect the RFC Destination connection to automatically re-establish itself. It does not. I have to go into IB:Config and change/save/reactivate a channel using the RFC destination so that it gets reregistered.
Is there a setting that will make the RFC Destination connectivity re-establish itself automatically?
Thanks
When you say "go add some spaces" are you referring to putting spaces in the description field just so you can change/activate? I assume you did, just checking.
Thanks Naveen.
Everyone else out there: Do you all have to manually do this every time the SLD goes down?
Similar Messages
-
RFC conn between SAP ERP and TREX not working
Hi experts,
we run a TREX instance on a Windows 2003 server and use it for our HCM portal.
The solution is in operation since 2 years but actually we face the problem that objects which have been created within the last month will not be covered by the index.
Without knowing about any changes in the setup I see the following error message when I perform the RFC connecten test in our ERP system:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program Trex_UKP_20071025104543 not registered
Error Details LOCATION: SAP-Gateway on host janos / sapgw00
Error Details DETAIL: TP Trex_UKP_20071025104543 not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 12906
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Jul 27 10:34:48 2009
Error Details VERSION: 2
In the TREX admin tool on the Windows server I see the following log message:
Source->Destination: Not set in TREX but TREX reachable -> ini file section missing?.
After reading lots of notes I guess that I have to register the server program that's used in the RFC on the gateway.
Unfortunately I have no idea how to do that.
Has anybody experiences with such a problem case or can tell me how to continue?
Is the problematic RFC realy the reason of my problem or just another side effect?
Many thanks for your really appreciated help in advance and best regards
GünterHi again,
the saprfc.ini on the TREX server look like follows:
DEST=UKT
TYPE=A
ASHOST=medos
SYSNR=00
DEST=UKP
TYPE=A
ASHOST=janos
SYSNR=00
UKT is our test system which is connected to the same TREX server and everything is fine there.
On the test system I can also see the registered server program in SMGW.
UKP is our productive system where the configuration should be the same.
Of course I do not see the registered server program in SMGW there.
Is the way described in above link (RFCACCEPT) the only correct way to register my server program?
I ask because I found information that the server program has to be developed according to this rfcaccept command and I have absolutely no idea wheather this is so.
Thanks again for your help!
Günter -
Whats the difference between RFC destination of type "HTTP" and "TCP/IP"
Hi Folks,
I want to know the difference between RFC destination of type "H" and "T".
In what instances/tasks we would use them?
Looking forward for your valuable answers...
Cheers,
Ram.Type of RFC connection.
By entering the type of RFC connection, you specify the communication method (TCP or SNA) and the logon type in the target sys
Type T (TCP/IP) destinations are connections to external programs that use the RFC API to receive 'Remote Function Calls'. You must specify the host name and the pathname of the program to be started. The communication method depends on how you select the program location.
Type H is the HTTP connection to R/3 system
Type G is the HTTP Connection to external server -
Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash. -
How to create RFC Destination Between ECC 6.0 and BI 7.0
HI,
My name is balu working in gucons,i was trying to create RFC between ECC 6.0 and BI 7.0,i have tried with the help of some documents but iam unable to do that,Iam very helpfull if you give a clear description regarding this problem.
Thank you,
Regards,
BALU.Hi Balu
the error screen is from your BI system? If yes, then why the source system is showing to be of type BI? For ECC it should be of type r/3.
You can try to delete already created RFC from both your BI and ECC system and try to create source system connection from your BI end from RSA1>> Source System> right click..Create..
Choose "Automatically Create SAP system" . Enter the required credential then click on "Replicate as well"
If you do not want to delete any RFC for any reason please upload entries from RSBASIDOC, RSLOGSYST table. -
RFC Destination with other Environments and Execute. Please help
Hi GURU,
I have a problem and I would like your help.
I'm new at Abap and I'm trying to develop an application from ABAP to connect to an environment of java.
I watched how to do this in various forums and the help of SAP, but just as I have found make the connection.
In java I have already developed the server side and I have developed a ABAP function. But is not exactly how it works.
Can you give me an example of how to send data from the sap application to java? Or give me any manual please.
Another problem is,
As I record the RFC destination?
When I run a BAPI ABAP occurs to me the following error:
RfcExecProgram'#Win32 error 2
Because it can be?
Thank you very much in advance
RAFAThe (Alesis Digital Audio Tape) ADAT optical I/O gives 8 channels up to 48Khz 24bit and 4 I/O at 88.2, 96 Khz... this are the technical specifications for this connectors!
http://www.nationmaster.com/encyclopedia/ADAT
If you need to use 8 ADAT I/O at 88.2/96 you need to buy device such as
Yamaha MY16at (for Yamaha Digital Mixer) http://www.studiocare.com/store/index.php?mainpage=product_info&productsid=62346
and similar devices
... or Motu 828MK3 that comes with 2X ADAT I/O....
Motu 828MK3 is able to work with up to 8 ADAT channels at 88.2/96 and up to 16 ADAT I/O at 44.1/48.
BUT... Apogee Ensemble comes with only 1X ADAT I/O... so you can use up to 4X 88.2 I/O channels and you need a second Ensemble unit for reach 8 ADAT I/O.
Optical connectors can be used also for 2 I/O at 192Khz...
in this case this kind of connection will be named as TosLink, even if it uses the same ADAT plug.
cheers
G -
I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe OliverHello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129 -
UFT 11.53 - toggle between keyword view and editor not working
Hello,
I have installed the enterprise version of UFT 11.53. I have patched it with Patch # 3 (00082) and Patch # 4 (00106) in order to get Chome v 37 support. Now when I try to toggle between keyword View and editor, it is not working. The editor is fine. The Keyword just set frozen and will not allow me to do anything other than, change it back to the editor
see when I click the toggle button...its frozen...see the toggle button is down.
It's so annoying. I'm going to have to uninstall it again.
Please help, if you know what's going onHello sfarren,
The forum you want is the HP Enterprise Business Community.
Right now you are in the consumer products forum.
I am guessing this link is the area you will want to ask your question at.
http://h30499.www3.hp.com/t5/Unified-Functional-Testing/bd-p/sws-Fun_TEST_SF
Good luck and hope it helps.
PS: You might have to register again to post on that forum. -
URGENT: Sync between touch apps and Cloud not functioning properly
I'm having a lot of trouble with the SYNC between Photoshop Touch and the Creative Cloud ... firstly it is ridiculously slow (in a fast wifi connection) but most annoyingly it gets stuck at 60% then tells me the sync is complete, when it isn't ... this is pretty crucial now because I have no option to choose Dropbox or some other sync method ...
David_B,
I'm getting the same issue as this fellow up top. my email is juvezavala -at- gmail.com. Running Photoshop Touch on my Acer A500 Android tablet. Sync gets to 24% then sometimes 50% but then starts over at 'Sync process: 0% complete.' -
IDoc via RFC problem between certified app and SAP ECC 5.0 on AS/400
Greetings.
I'm not sure this is the best forum for this question but here it goes:
Ever since 2000, we have our certified application for HR-PDC interface. We never had any problem that would be hard to resolve.
Recently, we had a customer who installed our app to exchange data with SAP ECC 5.0 on an AS/400 machine (first time interfacing with this platform for us).
We already checked all user permissions and every SAP note that mentioned this problem but it still doesn't work: when receiving and IDoc (just any), we get the error IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN.
Permissions for user are SAP_ALL and SAP_NEW and the IDocs used are the ones stated in the HR-PDC interface (for example, HRCC1DNPERSON, for instance).
I traced down the problem by examining the .trc files (RFC trace files) and I found where the problem lies: IDOCTYPE_READ_COMPLETE is being passed the IDoc Basic Type HRCC1DNPERSON and it should be HRCC1DNPERSON01. I did the same tracing for another installation (not AS/400 with SAP 4.6) and everything goes fine: IDOCTYPE_READ_COMPLETE is called with correct HRCC1DNPERSON01.
I'm wondering if this could be a problem in SAP 5.0 for AS/400 as we already have other customers running the same version on different platforms and everything just goes fine.
Any clues, anyone?
Thanks and regards,
André Baptistahi
we have a similary problem with our certified as400 application. Our client has the version 4.6C service pack 51 and patch 2161. Data transfert by RFC is ok but we have problems since the installation of the patch 2252. The RFC function RFCaccept do not run any more : the log
<i>argc = 2
argv[0] = 'HLSAP45A/HLKA15C'
argv[1] = '-DCP03'
Fri Nov 24 14:21:53 2006 *
<== RfcAccept rfc_handle = RFC_HANDLE_NULL
<== RfcLastError
RFC operation/code: RfcAccept
ERROR/EXCEPTION
key : RFC_IO5
status : CODE=CM_PRODUCT_SPECIFIC_ERROR STATUS=??? DATA=??? ID=???
message : LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Fri Nov 24 14:21:53 2006
RELEASE 45A
COMPONENT NI (network interface)
VERSION 31
RC -6
MODULE nio4i.c
LINE 891
DETAIL NiPRea
internal: IO HANDLE=1 DRV=??? LINE=1369 CODE=5
<== RfcClose </i>
Do you have solve your problem ?
thanks -
Linebreak between app description and update notes in store
Hello everyone, this might be an ununsual request, but:
Is there a way to get an empty line between the app description and the update notes, on the store page of an app?
For example: http://www.windowsphone.com/en-us/store/app/booru/9ecd20a6-e102-4ba1-89ee-52113564a1a8
As you can see, the text block starting with "Update notes:" is right below the text block of the app description. This makes it really hard to tell which is which.
I've tried adding whitespaces and empty lines but they're getting automatically removed.
Thanks for any ideas how to solve this!Mursalim wrote:
Hi,
I can not download and update my application in app store. Do you know how to resolve this problem?
I have iphone 4 and IOS 6.0.1
What is the problem?
What happens when you try?
Any info about your issue? -
RFC connections between Iseries (SRM) and Windows 2003 TREX
I have installed SRM4.0, server5.0 on our iseries and TREX6.1 on a windows 2003 server. I am having issues with the RFC connection from SRM to TREX. I have looked at and modified the TREXRFCSERVER.ini, TREXDaemon and topology files but it still says it can not connect to the gateway. Any suggestions on where to look? I have looked at trace files on the TREX directory but they mostly say it cannot connect without telling me where to go.
Thanks,
Chris suggHi Yann.
I read the note but we are on SP09 not SP02. Also, from my view, it appears that the note is assuming that the TREX installation and the SAP installtion are on the same server. This is not our case. The SRM, LAC, CCM, SUS and XI components are installed on our AS400 while the TREX and IPC are installed on a windows server. If I use the TREX hostname for the connection, I would think it would only stay on that server and not try to access the SRM (as400) server.
I will make the changes and see.
Thanks,
Chris -
Difference between Primary Key and Unique+Not NUll
Hi Guys,
Is there any difference the column being declared as primary key or unique+NOT NULL.
Please let me know the internal and application point of view.
Thanks in advance!
Ranjan957590 wrote:
Ok,Thanks however I donot think Primary key uses unique indexPK uses whatever index you specify - unique or not (as long as index is on proper column(s)). However, if you do not specify any index, PK creates unique index:
SQL> create table tbl(
2 id number,
3 name varchar2(10)
4 )
5 /
Table created.
SQL> alter table tbl
2 add constraint tbl_pk
3 primary key(
4 id
5 )
6 /
Table altered.
SQL> select index_name,
2 uniqueness
3 from user_indexes
4 where table_name = 'TBL'
5 /
INDEX_NAME UNIQUENES
TBL_PK UNIQUE
SQL> select constraint_name,
2 index_name
3 from user_constraints
4 where table_name = 'TBL'
5 /
CONSTRAINT_NAME INDEX_NAME
TBL_PK TBL_PK
SQL> alter table tbl
2 drop primary key
3 /
Table altered.
SQL> create index tbl_non_unique_pk_index
2 on tbl(
3 id
4 )
5 /
Index created.
SQL> alter table tbl
2 add constraint tbl_pk
3 primary key(
4 id
5 )
6 using index tbl_non_unique_pk_index
7 /
Table altered.
SQL> select index_name,
2 uniqueness
3 from user_indexes
4 where table_name = 'TBL'
5 /
INDEX_NAME UNIQUENES
TBL_NON_UNIQUE_PK_INDEX NONUNIQUE
SQL> select constraint_name,
2 index_name
3 from user_constraints
4 where table_name = 'TBL'
5 /
CONSTRAINT_NAME INDEX_NAME
TBL_PK TBL_NON_UNIQUE_PK_INDEX
SQL> insert
2 into tbl
3 values(
4 1,
5 'A'
6 )
7 /
1 row created.
SQL> insert
2 into tbl
3 values(
4 2,
5 'B'
6 )
7 /
1 row created.
SQL> insert
2 into tbl
3 values(
4 1,
5 'C'
6 )
7 /
insert
ERROR at line 1:
ORA-00001: unique constraint (SCOTT.TBL_PK) violated
SQL> SY. -
How do I get my notes to sync between my iPhone and the Notes App on my Mac?
I recently upgraded to the new OS 10.9.1 and I understand that without warning us, Apple has decided to remove notes from Mail and make it a separate App. That's fine, but none of the notes on my iPhone are showing up in the Notes app. I have tried creating a new note in the Notes app, but none of my notes seem to be syncing in either direction. This is a HUGE annoyance as I am constantly putting together memos and lists on my computer that I need to be able to view on my phone later or vice versa. How do I get my two Notes apps to sync with each other?
Ok, I signed out from iCloud and it told me that it removed all the data from my computer. I signed then back in and made sure to recheck the box to sync Notes and still the same problem. It has been over an hour and still none of the notes that are still on my phone have shown up in the Notes app on my Mac. The test note I created in the Notes app on my app is not showing up on my phone either. Furthermore, when I click on the Notes app it is still telling me that this computer can't connect to iCloud because of a problem with [email protected] .
-
Transfer of help between F4 Help and Application not working
I need immediate help in determining why the F4 help for BP Search not returning the selected field to the calling application.
After the user selects the F4 BP search help screen and performs a search the value selected is not returned and displayed in the calling application.
What is the missing link? Also, the field not populating was one that I added through PCUI.
Thanks.
Jasonyour probably best off phoning motorola because obviously theres something wrong with your phone which ony they can sort out there phone number is: 0870 9010 555
hope you get your phone sorted and hope this is a help to you
Maybe you are looking for
-
Losing keyboard letters on internet sites
letters work in finder and msWord but not on url pages or any internet sites...missing and .! See! (letter after "B" and "G")
-
Old email dissapeared in Inbox
This morning all my past emails in my Inbox had disappeared. I can view all these messages on my computer but all I had this morning was a blank screen with no emails in the Inbox. I'm receiving messages fine today but the feature of the 50 past emai
-
Mac dev for OS 8 and up! I have 3 questions.
I need to develope a program for Mac users. These are the questions I need before developement. Please help with any suggestions or answers on these issues. Thanks. 1) What are advantages and disadvantages between creating a JAR in comparresion to an
-
Hello Experts, Can any one help me understand what am I not doing correct or what needs to be done. My understanding is that for table FKK_INSTPLN_HEAD, 0FC_IPL_HEAD_01 is the standard extractor. However when I check in RSO2(R/3) the extractor refers
-
Why is a download update for 1 item increasing "time remaining" and is already over 2 hours?
I am not very adept at this stuff.