RFC destination in FM for development, quality & production server

Hi all,
I have a doubt in RFC enabled FMs..
The RFC destination wil be different for dev, quality & prodn.
Whn we do dev, we wil use RFC for Dev in Code & execute.
Do we need to change the code whn we move to quality & thn again whn moving to prdn?
How is this handled?? Is there any std. table where we can maintain this?
Need help on this
Thanks,
Sivagami

hi,
no need to chage this this means that that particular FM can be called from any other system as its RFC enabled.if one FM is not RFC enable then it can be execuetd on that parent server only we cant call if frm outside.
reward if helpful
ravi

Similar Messages

Development, Quality , Production server

Dear Experts,
I am new to SAP HR , Can some one help to understand the following terms.
1. Development server , where it has more clients. I am not able to understand it , like why it is being used.
2. Quality server - What is the purpose of it ?
3. Production server - what is the purpose of it ?
As a SAP HCM Functional consultant, what is our role in this 3 server ? If we need to make some changes where we need to do the configuration ?
4. Also please let me know what is Transport request ?
Waiting for the valuable reply from you experts.
Regards
Bala

Hi Bala,
In the Development system the SAP ERP is being configured: Customizations are done by the different processes consultants, developments are done by the programmers, etc.
The main system is the Production system - this is the system where the end-users work.
The end-user are required to perform checks and quality-assurance processes before the different programs and table are transported to the production system - these checks are performed on the Quality Assurance (QA) system.
Each system may have several clients, E.G., the Development system has the main client (usually its 100) - in which the consultants and developer perform the configurations, and another client (e.g. 110 or 120) - in which they can test the configuration.
Each system usually sits on different server. This is the call of the organizational IT department and the BASIS system. They will tell you how to logon to each system.
The transport request, his name suits him, is being used to transport customizations and developments from client to client and from system to system.
Regards,
Liran

SAP TAO,What is the purpose of Development,Quality,Production environment?

Hi All,
What is the significance of Development,Quality,Production environment under license tab of configuration in SAP TAO.
Which environment has to be selected for better operatability of SAP TAO functions.
Thanks and Regards,
Ujwal Kandimalla

Hi,
As TAO deals with the testing aspect, a 3 system landscape is recommended:
DEV : For unit testing
QA: For system testing and integrated testing
PRD: Has to be available for production usage
You could also have a Pre-Prod for load and UAT.
Regards,
Srikishan

No RFC destination is maintained for the port 'SAPERP'

Hi!
I am facing with a very strange thing.
I am implementing a File_to_IDOC scenario.
Therefore I created in XI system the appropriate Ports in tcode IDX1.
I use one business system with two clients (SAPERB100 and SAPERB200).
I defined there of course the appropriate RFC connections (RFC_IDOCERB100 and RFC_IDOCERB200).
Unfortunately when I go into tcode IDX2 and try to load metadata I get the following error:
No RFC destination is maintained for the port 'SAPERP'
Message no. IDOC_METADATA455
Diagnosis
No RFC destination has been maintained for logging on to this system for the port SAPERP.
This means that no structure information can be provided for this port.
Procedure
Maintain the required RFC destination for this port.
Can some one help me to solve this problem?
Thank you very much!
regards
Holger

HI Holger
You need to have a RFC destination created for XI server type 3 (ABAP) to push IDOC from ECC. Similarly you need RFC destination in XI towards ECC to load IDOC / RFC metadata.
Thanks
Gaurav

Why do we need to define RFC destination and user for material replication

Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
Ranjan

Hello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo

No RFC destination is defined for SAP Global Trade Services

Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59 Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
Ramji

Hi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji

Query related to request transfer from development to production server.

Hello,
I am transfering request from development to production server , the error occured is object REPT of particular program is inactive.
What is this error ?
Plz give answer as early as possible .
Thanks in advance.
Vikram.

Did You try my solution'
Hi..,
go to the request in SE09...
in the menu
Request/Task->Complete Check-> Display Inactive objects..
you will get the objects which are inactive and u can active them there itself.
santhosh

Transport user exit frm development to production server.

HI Gurus!
please tell me how to transport user exit frm development to production server.
Points Sure!
Regard,
Rahul .

Hi Rahul,
You have to create a project in CMOD transaction you can use the avialable one also.
after that attach your userexit to that Project.
The function modules which are used in that userexit must be activated.
Then transport the request with the help of basis Person.
Reward points if u find this suggestion helpful.
Thanks and Regards,
Yuvaraj

Patches difference in development, quality & production

Hi,
Our Development & Quality environment is on patchlevel
SAP_ABA 700 0018
SAP_BASIS 700 0018
PI_BASIS 2005_1_700 0018
SAP_BW 700 0020
Our Production server is on
SAP_ABA 700 0019
SAP_BASIS 700 0019
PI_BASIS 2005_1_700 0019
SAP_BW 700 0021
Golive is next week. already developments and configuration are moved to quality and testing is going on.
Now i want to upgrade the patches in dev & quality to production level.
After that only i ll move the transports to production.
Please suggest us whether any problems will come in developments & configurations when the transports are moved to production.
Regards,
Raj

It's difficult to commnet on.
Best is building a Sandbox by copying production system , moving all those transports there and test. Then if everything is fine, upgrade quality and devlopment.
But in any case , do you want to downgrade production patch level if any problem occurs after moving the transports to PRD?
If the answer is NO, then you can upgrade quality first and test new patch level. If you find any problem try to solve that ( may be by applying some notes or rasing a message with SAP)
I can make sure at least PI_BASIS 2005_1_700 0018 upgrade will not pose any problem.
Regards
Anindya

Defining a port /RFC Destination on XI for IDOC to File scenario

When defining a port on XI, what is the client number I am supposed to use to receive the IDOC from R3 to XI. I am assuming that I am supposed to use R3 client number to define the port in XI. Is this correct ?
Please explain this !!!
Also I am assuming the same procedure to define a RFC destination in XI. I am using the IP address of R3 client to define the RFC destination in XI to point to R3. Is this correct ?

hi satya
u may refer to the doc attached for more insight on the ports
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660</a>

Is RFC destination is required for accessing BAPI from java/VB program.

I am not able to understant that all BAPI are Remote enabled ,but no where I observed that RFC destination is required.
Can any body tell me exact flow and things step by step.
Any example/full source code so that I can call from java program.
I have tried some java code posted here but not able to understand ..
please provide me setttings also in SAP and java system

Hi Nagaraju,
Thank you very much. your post resolve one of my basic need .really appreciate your post.
I was not able to execute bapi BAPI_MATERIAL_GETLIST but I executed BAPI_PO_GETDETAIL succesfully.
Still I have 2 doubt.
[1]. I called BAPI function module(BAPI_PO_GETDETAIL) from simple java program,But I need to call API method ( GETDETAIL) created for this BAPI not direct BAPI function module.
[2] this is something apart from original topic.
I have tested your java code in java as well as similar in ECC 6.0
But I am not getting any output in JAVA program.
I am getting output in ECC6.0 only when I will take internal table lt_mara[] with header line.
if I will take separate workarea output is not coming. I think this is the problem in JAVA also.
Please see the code and tell me where I am wrong.
REPORT ZTEST1.
types: begin of ty_mara .
   include STRUCTURE BAPIMATRAM.
TYPES: END OF ty_mara.
types: begin of ty_list .
include STRUCTURE BAPIMATLST.
TYPES: END OF ty_list.
data: lt_mara type STANDARD TABLE OF ty_mara with HEADER LINE.
data: lt_list type STANDARD TABLE OF ty_list,
      ls_list like LINE OF lt_list.
START-of-SELECTION.
lt_mara-SIGN = 'I'.
lt_mara-option = 'EQ'.
lt_mara-matnr_low = '000000000000000088'. "'P1001087'.
lt_mara-matnr_high = ''.
APPEND lt_mara.
lt_mara-SIGN = 'I'.
lt_mara-option = 'EQ'.
lt_mara-matnr_low = '000000000000000089'. "'P1001087'.
lt_mara-matnr_high = ''.
APPEND lt_mara.
CALL FUNCTION 'BAPI_MATERIAL_GETLIST'
TABLES
MATNRSELECTION                     = lt_mara
MATNRLIST                          = lt_list[]   .
WRITE / 'output: '.
LOOP AT lt_list into ls_list .
write: ls_list .
ENDLOOP.
REPORT ZTEST2.
types: begin of ty_mara .
   include STRUCTURE BAPIMATRAM.
TYPES: END OF ty_mara.
types: begin of ty_list .
include STRUCTURE BAPIMATLST.
TYPES: END OF ty_list.
data: lt_mara type STANDARD TABLE OF ty_mara, ">> Without header line
       ls_mara like line of lt_mara.
data: lt_list type STANDARD TABLE OF ty_list,
      ls_list like LINE OF lt_list.
START-of-SELECTION.
ls_mara-SIGN = 'I'.
ls_mara-option = 'EQ'.
ls_mara-matnr_low = '000000000000000088'. "'P1001087'.
ls_mara-matnr_high = ''.
APPEND ls_list to lt_mara.
ls_mara-SIGN = 'I'.
ls_mara-option = 'EQ'.
ls_mara-matnr_low = '000000000000000089'. "'P1001087'.
ls_mara-matnr_high = ''.
APPEND ls_list to lt_mara.
CALL FUNCTION 'BAPI_MATERIAL_GETLIST'
TABLES
MATNRSELECTION                     = lt_mara
MATNRLIST                          = lt_list[]          .
WRITE / 'output: '.
LOOP AT lt_list into ls_list .
write: ls_list .
ENDLOOP.

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

RFC Destination is required for R/3 receiver system

Hi All,
Is RFC destination required for R/3 receiver system? Scenario i,e File >XI> RFC
How XI system communicate with R/3 receiver system?
Regards,
Sameer

Hi,
RFC dest is not required in this case, XI will communicate thru RFC channel which you will configure as receiver channel. Hence in this channel, you will mention the required parameters.
Please search this fourm and you will get plenty for blogs with step - to -step details of configuring the FILE 2 RFC scenario.
Regards
Sai Ganesh

RFC Destination None Error for MIGO

Hi,
I am getting RFC Destinatnation NONE error while posting Goods Receipt. GTS service for SD and MM is not active. Error showing for FM GRC01_COST_OBJECT_COST.
Can any one help in this regard.
Thanks in advance.
SP Raj

Hi,
Pl find the details below of the error.
Short text
    RFC destination "NONE" does not exist.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLCK36" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The 'destination' "NONE" for a Remote Function Call
    is unknown.
    You can display the RFC destinations available in the system using
    the transaction SM59.
Trigger Location of Runtime Error
    Program                                 SAPLCK36
    Include                                 ISAUTO_CK_SAPLCK36============E
    Row                                     812
    Module type                             (FORM)
    Module Name                             PRICE_STRATEGY_NEW
806 ************************************************************************
807 *     DOERNER, GRC, 10/11/1999: Add one new strategy:
808 * 3b. Create costestimate during goods receipt
809 ************************************************************************
810     when 4.
811       if k_debug_loc is initial.
>>>>>         call function 'GRC01_COST_OBJECT_COST' destination 'NONE'
813                 exporting
814                      im_vbeln     = f_mtcom-vbeln
815                      im_posnr     = f_mtcom-posnr

MII Development - Quality - Production promotion

Hi
Does anyone has experience in promotion of MII projects from Development to Production via SAP standard transporation?.
What we currently doing is transfer (export imports) of MII projects from one server to another server (i.e Development server to Test server and then to Production Server). I know there is CTS. Is CTS onyl available for ABAP or also available for MII?
Issues that we face during the transfer (import and exports) are
- The System connections and Data Servers' names have to be rename to have exact name as in the current system.
- The SQL code , has to be rename to match for each system. Especially if you work with Schema (writing schema names in the SQL code).
- This means the development has a lot of dependency for each current systems.
How do you deal with that???
Edited by: Seng Kiang Hoe on Dec 14, 2010 10:32 AM

Hi,
Your current promotion or transport process is common for MII 12.0 customers. New in 12.1 is the ability to use content management within the workbench for your MII objects. It uses [NWDI|http://help.sap.com/saphelp_mii121/helpdata/en/48/cfd8b4c1d310b4e10000000a421138/content.htm] to do this. You may want to research it further.
The [MII 12.x best practice |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f08d7ae2-6f56-2c10-50b4-8a3bb1d43502]guide talks about naming your data servers so that you don't have to change them when you transport. You should look into it and make some changes.
Regards,
Kevin

RFC destination in FM for development, quality & production server

Similar Messages

Maybe you are looking for