RFC Destination not getting connected - IDoc to XI scenario

Hi Everybody,
I want send an IDoc from R/3 System to Xi, I have created Two logical systems (Sender and Receiver correspondingly) and i have assigned the clients to them.
Once i create RFC destination, i have specified all my technical settings as well as Login/Security settings, once i click, "Remote Log On" it takes me directly to Login page of XI. Please guide me how to solve the problem. If i click Test---> Authorization, it prompts out with an error "Name and Password is incorrect (repeat Logon)", but i have given exact username and password.
I am a fresher to XI.... please give me some documents related to IDoc to XI scenario step by step to [email protected] I would be grateful and appreciate you if u would help me to sort out this problem....
Please give me step by step solutions.... Thanks in Advance...
Regards/Guru

Requirements in R3 system:
1. Create RFC destination pointing to XI in SM59
2. Create port for XI using we21
3. create Outbound Entry in partner Profile for XI in we20.
Requirements in XI system:
1. Create Technical System pointing to the R3 system.
2. create Business System pointing to the R3 system.
If you want to send IIDOC out of XI,
1. SM59 - Create RFC destination
2. IDX1 - Create port
3. IDX2 - Import Metadata.
Note:u dont need a IDOC sender adapter or a Sender Agreement to sent a IDOC to XI.
Check dis link for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
please refer to michel book on IDCO usage in XI
Message was edited by:
Sreeram Reddy

Similar Messages

Defining a port /RFC Destination on XI for IDOC to File scenario

When defining a port on XI, what is the client number I am supposed to use to receive the IDOC from R3 to XI. I am assuming that I am supposed to use R3 client number to define the port in XI. Is this correct ?
Please explain this !!!
Also I am assuming the same procedure to define a RFC destination in XI. I am using the IP address of R3 client to define the RFC destination in XI to point to R3. Is this correct ?

hi satya
u may refer to the doc attached for more insight on the ports
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660</a>

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

My Ipod Touch is not getting connected to the itunes its showing error

my ipod dose not get connected in the itunes its goin on showing an error message whn ever i connect kindly help me plz

it says tht the ipod cannot connect to d itunes and on my ipod screen an image only i can c the image is like when u buy the ipod and connect it for the first time to your laptop u can see an image right asking u to connect to the itunes only that image i can c and on my itunes page it shows an error that my ipod cannot connect......

Not getting connected to a data source in obiee 11g

Hi friends,
In OBIEE 11g I cannot able to import meta data into a new repository...
It is not connecting to data source for importing meta data
It throws the error like connection is failed....
I have also restarted the services and also checked for the odbc connectivity it is showing connection is
successful..
I also entered the corresponding details in TNS notepad...
These are the following details
TEST =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 172.16.1.110)
(PORT = 1522)
(CONNECT_DATA =
(SID = TEST)
The data source name that i was given is ORCLBI for my reference...
Then why it is not getting connecting to the data source..Help me friends For importing tables to my repository as soon as it is connected to the data source...
Thanks
Harry...

Hi,
Go through venkat reply in this...May help you..Re: Cannot connect to Database from the OBIEE 11g upgraded RPD
Regards,
Srikanth

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store.

After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
Regards,
Maciek

Click the round flag icon bottom right corner of the App Store window.

HT4623 I can not get connected to App Store , download or update any apps, EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html

Can not get connected to my WIFI, every time I get connected it take me to a blank screen, can not get connected to my WIFI, every time I get connected it take me to a blank screen

can not get connected to my wifi, every time I get connected it take me to a blank screen

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Webcam does not get connected

My Creative webcam Live ultra is not getting connected for the past few days. It shows a message "waiting to reconnect" followed by "network error occured while trying to connect to server". Can you please guide. Thanks

I've found that enabling "video chat enhancements" under the Labs section in the GMail settings makes it work correctly on my computers. Downside to that is you will need more processing power, and it might not run on older or lower end machines, but it's probably worth a shot.

My wifi is not getting connected to my iphone 4s

wifi is not getting connected in iphone 4s

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

My iPhone is not getting connected to my home wifi. My Macbook and other devices are getting connected so nothing is wrong with the wifi!

My iphone is not getting connected to my home wifi. my macbook is getting connected and also other devices. SO there is nothing wrong with the wifi.
Please help.

Hi Go to settings Reset Network Settings on iPhone After Reset you need to enter your Router wireless key. Cheers Brian

My iphone is not getting connected to itunes. What should I do?

My iphone is not getting connected to itunes. What should I do?

See this support document and follow the directions. http://support.apple.com/kb/ht1212

Doubt about RFC Destination in FILE to IDOC Async scenario

hi
In FILE-XI-IDOC Async Scenario we are creating RFC Destination in R/3 and XI.
For Asyn we don't want response But We are Creating RFC Destination in R/3 also.
Any specific reason.
Thanks in advance.

First you need to have a clear understading of how the idoc adapters works.
In xi we create rfc destination and specify that in the port maintenance on the idoc adapter so that we can establish a connection to the sender / receiver system which contains the IDOC METADATA (IDX2) that is required by the idoc adapter to convert the native idoc into idoc xml format.
In R/3 as sender we create rfc destination so that when the idoc has to be transported to the xi system first it will be sent to trfc port that rfc desination that u define the trfc port contains that the target system address(IP) and logon parameters req.So idoc can be sent to the desired destination.
In R/3 as a receiver to facilitate communication we define rfc dest, partner profile and specify the inbound parameters so that idoc can be posted.
Hope this answers your ques.
cheers
*Raj*
*POINTS IF SATISFIED WITH ANSWER.

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

RFC Destination not getting connected - IDoc to XI scenario

Similar Messages

Maybe you are looking for