RFC destination P11TPMREPL does not exist.

Hi All,
We are having inbound qRFC from CRM system to ECC R/3 Quality system . The problem which I am facing is all the qRFC from CRM to ECC R/3 going into 'CPICERR' error. The error message say 'RFC destination P11TPMREPL does not exist.' .
We are receiving this error in our Quality system and the 'P11TPMREPL' is the production RFC destination.
I am not getting why the inbound qRFC from CRM to our Quality system is looking for production 'P11TPMREPL ' destination.
Is anyone having idea; what is going wrong and where do I need to for RFC settings.
Thanks.
Shilpa

Sorry,
In my system IDOC got the same problem.
I thought yours also same problem.
There is no queue configuration, since this is a logical queue. There are no separate tables for the individual queues. For an R/3 system, there is only one table for the send queues. All entries for queues of all participating LUWs are stored in the queue table TRFCQOUT.
and also check this table QSENDDEST.
Thanks
Naresh

Similar Messages

Communication failure : RFC Destination SALV_WD_EXPORT_PDF does not exist

Hi Experts,
I have one standard ALV report in ABAP Webdynpro.
When i try to print the ALV Report it gives Communication failure : RFC Destination SALV_WD_EXPORT_PDF does not exist.
Can you give solution for this one.
Regards,
Sri

Hi Sri
Please go through this..
/people/bv.pillai/blog/2007/01/09/webdynpro-abap-alv-print-versionpdf
also Have a look this note SAP NOTE 918236; you will need help from basis.
Cheers,
Kris.

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

Java communication error - RFC destination NOT_CONFIGURED does not exist

Hello,
We are facing problem when sending reports(BEx Quert) through broadcasting to the users. We are getting the error "Java communication error RFC destination NOT_CONFIGURED does not exist" in the Log Display (Tcode: RSRD_ADMIN).
In the broadcasting setting, if we select variable values in the tab "General Precalculation" then we can able to send the report to user, instead of selecting variable values, if we use the option "User Specific" check box in the tab Receipient(s) (which will take selection from the role authorizations defined in the respective user roles), then we are getting the above error.
Recently we have upgraded suppor package, please find the system details below
P_BASIS - SAPKB70025
PI_BASIS - SAPKIPYM12
SAP_BW - SAPKW70027
Java - Support Package 25
We didn't change any roles and authorizations recently, just upgraded to latest SP. Can anyone suggest if any steps or checks need to be perfomed after applying these SP or missing anything?
Thanks in advance
Regards,
Venkatesh

Hi,
This is configuration issue. Please check the configuration between BW and EP below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&overridelayout=true
Thanks,
Venkat

HTTP destination IED_100 does not exist (system , transaction SM59)

Hi guys,
When I try to send a xml file to WAS using ABAP Proxy I receive this error message: "HTTP destination IED_100 does not exist (system , transaction SM59)".
I did a test connection in sm59 for http connections/R/3 systems and the messagem bellow is ICM_HTTP_CONNECTION_FAILDED.
What could be wrong?
Thanks in advance,
Ricardo

Hi Sridhar,
Im trying connecting XI to WAS 6.40 using ABAP Proxy.
Now I receive this error message: <SAP:Code area="INTERNAL">SYSTEM_NOT_CONFIGURED_AS_XMB</SAP:Code>
<SAP:Stack>System not configured as Integration Engine</SAP:Stack>
I have defined my business system IED_100 (WAS 6.40) like application system and the related integration server is XI. Its correct?
When I check the component monitoring > Integration Engines > Proxy runtime IED_100, this message is displayed:
Unable to log on to system IED_100 in language en with user XIRWBUSER. But in WAS system (IED_100) I dont have a user XIRWBUSER!!! I need to create it?
Tell me if Im correct: I dont need any RFC adapter; Im only need an XI adapter (http) to send the xml file to ABAP proxy (IED_100) and on IED_100 I need to activate XI message format service in SICF and create a RFC connection in SM59 to call XI integration server. This is already done!
In sm59 I continue with ICM_HTTP_CONNECTION_FAILED
Thanks in advance,
Ricardo.

Saving photos to the web by creating events. Called the destination folder does not exist.

Hello,
I ask you for advice (assistance). A week ago I re-installed the PC and installed to the computer again Photoshop CS5. Everything works for me except for the function of storing images for web by creating events. Called me constantly destination folder does not exist. The problem I had before. I ask you this advice on how to solve this problem.
Thanks for the advice

hi,
i don't know if i integrate your code correctly, but it doens't work for me. I presently create skin for client and this plugin is really usefull for me.
i use win7 64bit home edition, and photoshop cs5
there is how i integrate this :
// EDIT ALEX GRENIER
function getPreferencesFolder() {
     var userData = Folder.userData;
     if (!userData || !userData.exists) {
          userData = Folder("~");
     var folder = new Folder(userData + "/xtools");
     if (!folder.exists) {
          folder.create();
     return folder;
function exportChildren(dupObj, orgObj, dupDocRef, folder) {
if (getCSVersion() >= 10) // CS3 Only
     // Create assets folder in Flex app's directory
     // var tempFolder;
     // tempFolder = new Folder (folder + "/assets/");
     // tempFolder.create();
     // EDIT ALEX GRENIER
     var tempFolder;
     tempFolder = getPreferencesFolder();
i put the code creating the folder in comment and put your code in place, i also put your function before the function creating file.
With the base code (without modification) photoshop is able to create my folder assets, but when it try to export the png, it export nothing, so i have a empty folder.
thank you,
Alex

Destination Directory Does not exist.

While working in Flash MX 2004, when I want to preview the
work I've done, I click F12 and get the following Flash MX error
message: Error Creating HTML File. Destination directory does not
exist. Change you publish settings.
The publish settings look correct to me. What's up with this?

If you have PKGDEST variable in /etc/makepkg.conf set then the path you gave it doesn't exist or permission is denied, or if you don't have it set, then you are trying to build the package in a current directory that you don't have permissions to. Its just trying place the pkg.tar.gz somewhere.

Can't Delete A Message: Destination mailbox does not exist

Got a spam email today and Mail won't let me delete it. Clicking Delete grays the message, but it won't move to the Trash. If I try and drag it manually, I get the error message "destination mailbox does not exist."
And it's right: the To: address is a fake one and NOT one of my accounts.
Anyone know how in the world I can get rid of this message?

Hi Ernie,
Thanks for your help. In the end, my solution was to delete the GMail account completely from Mail.app, recreate it and let it synchronise my mail back from Google (I have Mail.app set to leave messages on the server, for GMail). I now of course have all the 'correct' emails back in Mail.app, without the ones I could not delete.
I can tell you, though, that there were indeed no other files in the old INBOX.mbox folder other than the ones you mentioned. What other files might there have been?

Could not complete the Action, since the destination folder does not exist.

I'm a frequent user of "Image Processor" but today accidentally I am getting the error although I am having the required folder as a destination.

Is the Folder on an external medium, what are the complete path and name of the Folder?

"ERROR - The destination mailbox does not exist"???

If I try to move an email from a mailbox/folder I made in Mail app to my inbox I get this ridiculous message. What's up with this??
Thanks
12 inch Powerbook G4 1GHz Mac OS X (10.3.1)

Kevin,
Welcome to the Discussions.
The Junk.mbox folder in the account folder may not have gotten converted to the new mailbox structure in Tiger. You could confirm this by using the Finder to open Home/Library/Mail/the account folder/the Junk.mbox folder, and reporting the contents.
However, it will likely be useful to place the Junk filtering back into Training, quit Mail and drag any Junk.mbox folder from the account folder, relaunch Mail and choose again to have Junk mail moved to the Junk mailbox, and Mail should create a new Junk.mbox folder, that it can use.
Keep us posted.

JCoDestination Problem: JCO_ERROR_RESOURCE: Destination does not exist

Hello Experts,
I followed the JCo3 tutorial of accessing backend ABAP system.
I implemented the following code:
File configuration = new File(JCO_DESTINATION_APP +".jcoDestination");
if(!configuration.exists() || updateprovider) {
   Properties properties = new Properties();
   properties.setProperty(DestinationDataProvider.JCO_ASHOST, Configuration.getInstance().ashost);
   properties.setProperty(DestinationDataProvider.JCO_SYSNR, Configuration.getInstance().sysnr);
   properties.setProperty(DestinationDataProvider.JCO_CLIENT, Configuration.getInstance().client);
   properties.setProperty(DestinationDataProvider.JCO_USER, Configuration.getInstance().user);
   properties.setProperty(DestinationDataProvider.JCO_PASSWD, Configuration.getInstance().passwd);
   properties.setProperty(DestinationDataProvider.JCO_LANG, Configuration.getInstance().lang);
   properties.setProperty(DestinationDataProvider.JCO_POOL_CAPACITY, "" + Configuration.getInstance().connections);
   properties.setProperty(DestinationDataProvider.JCO_PEAK_LIMIT, "" + Configuration.getInstance().connections);
   FileOutputStream fos = new FileOutputStream(configuration, false);
   properties.store(fos, JCO_DESTINATION_APP);
   fos.close();
When I execute the following code:
this.getDestination().getAttributes()
I get the following error:
com.sap.conn.jco.JCoException: (106) JCO_ERROR_RESOURCE: Destination JCO_DESTINATION_APP does not exist
     at com.sap.conn.jco.rt.DefaultDestinationManager.update(DefaultDestinationManager.java:163)
     at com.sap.conn.jco.rt.DefaultDestinationManager.searchDestination(DefaultDestinationManager.java:292)
     at com.sap.conn.jco.rt.DefaultDestinationManager.getDestinationInstance(DefaultDestinationManager.java:90)
     at com.sap.conn.jco.JCoDestinationManager.getDestination(JCoDestinationManager.java:61)
     at com.exz.app.common.helper.IntegrationPlatformAccessor.getDestination(IntegrationPlatformAccessor.java:83)
     at com.exz.app.common.helper.IntegrationPlatformAccessor.<init>(IntegrationPlatformAccessor.java:67)
     at com.exz.app.common.helper.IntegrationPlatformAccessor.getInstance(IntegrationPlatformAccessor.java:32)
     at com.exz.app.interfacemng.services.Template_WebService.<init>(Template_WebService.java:34)
     at com.exz.app.interfacemng.services.ConfigurationScenarioServiceClient.<init>( ...
What am I missing?
Regards.

As a starter it might be best to take try out the examples that ship with the JCo3 distribution. I cannot comment much on your code, as it's an excerpt and doesn't show everything. E.g. I have no clue what the line this.getDestination().getAttributes() means; usually you retrieve destinations via the class JCoDestinationManager and there you always have to at least provide the name of the destination.
So let me give some generic comments instead:
<ul style="list-style:circle">
<li>Properties for destinations can be returned via a class that implements the interface DestinationDataProvider; you can register your own implementation (once) via static method Environment.registerDestinationDataProvider().</li>
<li>SAP ships the JCo with a generic file handler for providing destination attributes: It basically searches in the current directory (i.e. from where you started your application) for client destinations with the given name and extension ".jcoDestination" (server destinations use extension ".jcoServer"). As far as I remember you can also change the directory where those destination property files are searched for by setting System property "jco.destinations.dir".</li>
<li>I strongly recommend registering your own DestinationDataProvider (or ServerDataProvider) and so does SAP; this is especially true if you get your properties from somewhere else (as it seems to be in your case) or want some specific processing (e.g. use encrypted passwords in your properties that you decrypt upon loading).</li>
<li>For troubleshooting your existing coding I'd verify that you did actually create the file with the properties and that the file name (without the extension) matches the name that you use when trying to retrieve the destination.</li>
</ul>
Cheers, harald

Error in Local Message System: RFC destination 10.189.98.10 does not exist.

Error in Local Message System: RFC destination 10.189.98.10 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam going inside the tcode SM30 in the satellite system and entering the destination ip of solution manager system and after that when iam creating a message from HELP-CREATE SUPPORT MESSAGE, then it is throwing the following error.
Can anyone please help me in the above issue.
Regards,
Mirza Kaleemulla Baig.

Hi Mirza,
For the RFC destination don't enter the IP address,enter the RFC name,somthing like SM_SP1CLNT200_BACK which is maintained in sm59.
Revert for any clarifications.
Thanks and Regards,
Avinash.

RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Hi All,
I am getting the error "RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAILURE" when planning sequence (IP) is executed. Can some one help me please asap.
Regards
Kiran

Hi,
Please go to sm59 and check if the RFC connection exists for this source system. If its there, please double click on it and on next screen, go to Menu bar and click on Test-> Connection and then test -> authorisation.
If you get any error, thats the reason. If you dont find the RFC at all, thats the reason why you got error.
You may also check WE20 for partner profile, whether it exists or not.

Destination does not exist (help please)

Background:
- Using Flex Builder 3 plugin for Eclipse
- Downloaded latest BlazeDS release build
- Running Tomcat 6.0.16
=======
First I want to note the samples that come with BlazeDS run
absolutely fine.
So I created a new project in Flex Builder 3. I'm just trying
to get something simple working at first so my one mxml file is as
follows (I stripped out everything except the code in question):
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:RemoteObject id="ro"
destination="enrollmentService"/>
<mx:DataGrid
dataProvider="{ro.getEnrollmentList.lastResult}" width="100%"
height="100%"/>
<mx:Button label="Get Data"
click="ro.getEnrollmentList()"/>
</mx:Application>
=====
I created and EnrollmentService class and I'm sure it's
getting compiled to WEB-INF/class...I see .class file there.
I added the flex folder to the WEB-INF folder. My
remoting-config.xml is as follows (because of problems I specified
a default and repeated it to be sure):
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="enrollmentService">
<properties>
<source>test.service.EnrollmentService</source>
</properties>
<channels>
<channel ref="my-amf"/>
</channels>
</destination>
</service>
My services-config has the following channel defined:
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
My web.xml is a follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD
Web Application 2.3//EN" "
http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>RemoteTest</display-name>
<context-param>
<param-name>flex.class.path</param-name>
<param-value>/WEB-INF/flex/hotfixes</param-value>
</context-param>

<listener>
<listener-class>flex.messaging.HttpFlexSession</listener-class>
</listener>

<servlet>
<servlet-name>MessageBrokerServlet</servlet-name>
<display-name>MessageBrokerServlet</display-name>
<servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
<init-param>
<param-name>services.configuration.file</param-name>
<param-value>/WEB-INF/flex/services-config.xml</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>MessageBrokerServlet</servlet-name>
<url-pattern>/messagebroker/*</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
</welcome-file-list>
</web-app>
====
So I start Tomcat from Eclipse and run the app by clicking
the Run button in Eclipse. The app comes up fine, but when I press
the "Get Data" button. I get the error message below. For the life
of me I don't understand why. I clearly have a default channel AND
I have specified a channel. This is so frustrating...any help would
be greatly appreciate.
====
[RPC Fault faultString="[MessagingError message='Destination
'enrollmentService' either does not exist or the destination has no
channels defined (and the application does not define any default
channels.)']" faultCode="InvokeFailed" faultDetail="Couldn't
establish a connection to 'enrollmentService'"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\AbstractInvoker.as:257
at mx.rpc.remoting.mxml::Operation/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\remoting\mxml\Operation.as:197
at
mx.rpc.remoting::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\remotin g\Operation.as:113]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at
mx.rpc.remoting.mxml::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\re moting\mxml\Operation.as:170]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.rpc::AbstractService/
http://www.adobe.com/2006/actionscript/flash/proxy::callProperty()[E:\dev\3.0.x\frameworks \projects\rpc\src\mx\rpc\AbstractService.as:285
at
FlexJ2EE_test/___FlexJ2EE_test_Button1_click()[C:\Prj\workspace\RemoteTest\flex_src\Remot eTest.mxml:36]

While creating a Flex project using Flex builder, did you
select the server type for your project? If you did not select a
server type for your flex project, did you configure your compiler
to include your services-config.xml using the -services argument?
In your project's compiler settings, add -services
"configurationfiles/services-config.xml" argument to the compiler
arguments. The path should point to your services-config.xml.
If the above mentioned steps were completed and still your
facing problem, can you please try running "clean" on your project.
Hope this helps.

Using SSIS 2012 - merge join component to transfer data to destination provided it does not exist

HI Folks,
I have a table - parts_amer and this table exists in source & destination server as well.
CREATE TABLE [dbo].[Parts_AMER](
[ServiceTag] [varchar](30) NOT NULL,
[ComponentID] [decimal](18, 0) NOT NULL,
[PartNumber] [varchar](20) NULL,
[Description] [varchar](400) NULL,
[Qty] [decimal](8, 0) NOT NULL,
[SrcCommodityCod] [varchar](40) NULL,
[PartShortDesc] [varchar](100) NULL,
[SKU] [varchar](30) NULL,
[SourceInsertUpdateDate] [datetime2](7) NOT NULL,
CONSTRAINT [PK_Parts_AMER] PRIMARY KEY CLUSTERED
[ServiceTag] ASC,
[ComponentID] ASC
I need to exec the following query using SSIS components so that only that data ,is transfered,which does not exist at destination -
select source.*
from parts_amer source left join parts_amer destination
on source.ServiceTag = destination.ServiceTag
and source.ComponentID=destination.ComponentID
where destination.ServiceTag is null and destination.ComponentID is null
Question - Can Merge component help with this?
Pl help out.
Thanks.

Hi Rvn_venky2605,
The Merge Join Transformation is used to join two sorted datasets using a FULL, LEFT, or INNER join, hence, not suitable in your scenario. As James mentioned, you can use Lookup Transformation to redirect the not matched records to the destination table.
Another option is to write a T-SQL script that makes use of
Merge statement, and execute the script via Execute SQL Task.
References:
http://oakdome.com/programming/SSIS_Lookup.php
http://www.mssqltips.com/sqlservertip/1511/lookup-and-cache-transforms-in-sql-server-integration-services/
Regards,
Mike Yin
TechNet Community Support

RFC destination P11TPMREPL does not exist.

Similar Messages

Maybe you are looking for