RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Hi All,
I am getting the error "RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAILURE" when planning sequence (IP) is executed. Can some one help me please asap.
Regards
Kiran

Hi,
Please go to sm59 and check if the RFC connection exists for this source system. If its there, please double click on it and on next screen, go to Menu bar and click on Test-> Connection and then test -> authorisation.
If you get any error, thats the reason. If you dont find the RFC at all, thats the reason why you got error.
You may also check WE20 for partner profile, whether it exists or not.

Similar Messages

LV 8.5.1 AppBuilder error source does not exist

Hi,
I have a rather strange problem:
Every time I try to to build a VI that was converted from LV 7.1.1 to LV 8.5.1 I get an error that the source does not exist,
although the VI is there and the Preview-build does not throw an error :-/
When trying to build a VI created with LV 8.5.1 the build succeeds of course.
Does anybody have faced similar problems?
The VI and the project should be attached...
thx a lot,
Leo
Attachments:
SourceNotExisting4.zip ‏5 KB
SourceNotExisting5.zip ‏5 KB

Hi Johannes,
I have already converted and saved the VI to LV8.5.1.
Anyway, here are the steps to reproduce the problem:
1. Open the LV7.1.1-VI using LV8.5.1
2. Save it with LV 8.5.1
3. Create a new project containing the VI and having it as startup VI in an Application
4. Trying to build the application --> leads to the "source does not exist" error
Attached is the source VI (vers. 7.1.1) causing the problem.
thanks in advance,
Leo
Attachments:
Check_Pfad.vi ‏44 KB

Time series does not exist, Error in Source System

Hi friends,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

Compiling a vi with link to an external non NI dll = error 7 "source does not exist""

I'm trying to compile a vi using Application Builder. The vi contains a number of links to drdaq32.dll (a dll to give access to Picotech�s DrDAQ data aquisitiion unit. This is connected via the parallel port and comes with a BNC connector and a high impedance input suitable for pH probes). Communication with the dll is via code interface nodes).
System:
LabVIEW v. 6i
Windows NT4
DrDAQ and DrDAQ.dll via parallel port (lpt 1) www.picotech.com
Code interface node calls to the dll use a standard (WINAPI) calling convention and �run in UI thread�
When I try to build, I get the error
"Error 7 occured at ......drdaq32.dll - source does not exist"
The source does exist. I hav
e got the same error with the dll in the same directory as my vi and in a sub directory data.
Why does Application builder refuse to see this file ??

I don't believe that this is the case.
Application builder is really very specific about what files are available and in what state. Though it is not really documented anywhere to my knowledge, the proper steps to building an application are as follows:
Before doing this, LabVIEW should be closed, and all other VIs out of memory.
1. Open your top level VI.
2. Click the run button to recompile
3. Choose "Save All" from the file menu
4. Close your top level VI and ensure that all VIs are saved properly.
5. Quit LabVIEW
6. Open LabVIEW - DO NOT open any of your VIs. Open LabVIEW from labview.exe via the start menu or other shortcut!
7. Open a new VI.
8. Open the application builder (tip, I went into the projects folder and
pulled a shortcut of the app builder out and onto my start menu, this opens the app builder fresh after LabVIEW has been exited.
9. Proceed with your build as normal.
The problem is that LabVIEW retains VIs in memory, even after they are all closed. If there is anything incomplete about these VIs, this will affect the build process. Unsaved VIs do not show up as being valid files (or something like that) to the app builder, thus if you didn't save even one single VI and try to build the application, you will get an error 7.
Step 1 is specific to your case, as recompiling ensures that all external connections are properly made.
If you still have the problem, post here and let us know.

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Compiling a vi with link to dll = error 7 "source does not exist"

I'm trying to compile a vi using Application Builder. The vi contains a link to imaq.dll (a part of the NI vision pack).
When I try to build, I get the error
"Error 7 occured at Imaq.dll - source does not exist"
But the source does exist, and it is not hidden, read-only or blocked by security policies.
Why does Application builder refuse to see this file ??
I tried copying the file to the base dir of the vi, and added it to the build from there => same problem.
System:
LabView v. 6i
Imaq v. 2.5
Windows NT4

Hi Angelo,
If the vi is working properly under LV, then you can try to register the IMAQ.DLL
Execute the following command:
REGSVR32 "the complete path of IMAQ.DLL"
You should get a message that it has been registered; then try again.
Good luck,
Alberto

Error 7 occurred at source does not exist

I have VIs written in LabVIEW 6.1 and works fine. I try to use LabVIEW 7 to build it. But I got error:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
Application Builder: Error copying files.
It does not point out which file is not exsisted? Why?

Hello �
From your question, I understand that you are trying to build an executable for LabVIEW 7.0 of some VIs that were built in LabVIEW 6.1.
You need to save all the VIs and subVIs that will be contained in the executable (or DLL) in LabVIEW 7.0 first. For this, the only thing you need to do is to open them in LabVIEW 7.0 and re-save them. If you want to keep copies for both versions of LabVIEW, you could even create a different folder for the version 7.0 ones. When re-saving your VIs just go to File >> Save As and browse to the directory you just created.
Then, you will be able to build the executable for LabVIEW 7.0.
Another possible solution to the problem is what is mentioned in this 5F09C86256745006E4494?OpenDocument>Knowledgebase.
Hope this helps!
S Vences
Applications Engineer
National Instruments

Data source does not exist

Dear all,
am extracting the data from Vistex datasource,IRM/LIS_RM_IPCRASP IP CR Agreement Conditions
after activating in RSA5 i can able to see in RSA6
but while activating the data source after the extract structure has successfully generated,
the system showing data source does not exist
plz help me

hi,
when i click the maintain button save button will appear,
but in my case this save button not highlighting...
when i check in ST22 the system proposed error mesage is table illegal statement,
i found this error in many forums but its not related to datasource actvation,
plz anyone giv me solution as soon as possible...
regards
Edited by: gadhatharan thirunavukkarasu on Oct 15, 2011 7:57 AM

Source Does not exists

Hi Friends!
Please, I need your help with this issue!!
I generate 'Export Datasource' in development server.
When I replicate them in Testing server, I replicate these as RSDS, and NOT as 3.x datasources (yes, was not a good idea)
Now in testing server, I can see the datasource, but when I try to 'access to 'Display' in the context menu, give me the error msg:
"The DataSource 8CRN_PPP (QBICLN00) does not exist"
The rules (RSDS from datasource to infocube), are inactive too, and when I try to display or activate this, give me the error msg:
"Source does not exists"
How can I solve this?
PLEASE, I NEED YOUR HELP!!
Edited by: SSap on Aug 14, 2009 2:12 PM

Hi,
Seems that your export datasource is having the problem. 1st check it the activate mode of your export datasource in dev n transport to testing.
whiloe transporting the dataflow yiou need to transport your export data source also. i hope you missed this object in your transport request.
Thanks
Aravinda

Data Source does not exist in version A.

Dear Experts,
I have created Data Source in R/3 ( ECC ) by t. code rso2. If am trying to display Data source by t.code RSA2 . It gives message
Data Source does not exist in version A.
Regrads,
Anand Mehrotra.

Hi Anand
RSO2--->Put DataSource name -
>Change button -
>Save -
>It should open a new screen with DS header data -
> From Menu ( DataSource -
>Generate).
Now you should be able to see your datasource.

Item does not exist error when updating item

Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik

ESS Salary statemenr: Form Does not exist error

Hi Experts,
As mentioned in may threads, I have changed the form name for salary statement to the custom form name in SPRO- --> HRFOR
But the portal displays "Form does not exist" error. Could not find a solution in any existing post on sdn.
Urgent help needed.
Thanks,
Shobhit

Hi,
If your payslip form is desinged in PE51, then follow these steps.
Employee Self-Service-> Service-Specific Settings-> Benefits and Payment-> Salary Statement-> Form Using HR Forms Editor (PE51)
a. Edit Feature HRFOR: Maintain the constant $CEDT$ for MOLGA 40 RCLAS +01(03).
b. Enter Payslip variant in EDTIN feature
c. Maintain smartform name in EDPDF
If your payslip form is designed in HRFORMS, then enter the form name in HRFOR feature and enter the variant in EDTIN.
Cheers!!
Ashutosh

"SAP_PAYSLIP_US does not exist" error in Salary statement iView of ESS

Hi all,
We have SAP EP7.0 (NW 2004s) with the ESS business package for MySAPERP 2005.Most of our iViews of the business package are working fine,but some are givig problems.
When we try to launch the Salary Statement iView under BEnefits and Payments Workset we get the "SAP_PAYSLIP_US does not exist" error.
The form name SAP_PAYSLIP_US is active and also we have specified the form name in the SPRO settings.
If we change the form name (for e.g.UF01) then the error displayed is "UF01 does not exist".
Can anyone point out as to what the problem is.
Is there any settings we are missing?
Thanks,
Pradeep Shetty

Hi To all!
The Form SAP_TIMESLIP doesn't exist. The correct form to use in the feature HRFOR is SAP_TIM_99_0001 or SAP_TIM_99_0002.
Activate the form in transaction HRFORMS.
SAP didn't release the form SAP_TIMESLIP.
Hope this information is usefull.
Sónia

Package does not exist error-message

When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
Has anyone encountered this or any ideas?
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.* ;
import java.io.* ;
import java.sql.* ;
import com.ericsson.snf.mps.mppapi.mtlr.*;
The error messages come from the 'import com.ericsson.snf.........' statement.
I am trying to integrate ericsson software, into my application.
Thanks,
java-mobile-user

That's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Similar Messages

Maybe you are looking for