RFC Destination User Authority

Hi fellow XI-ers,
I have an Integration Server (A01) and a Business System running ECC 5.0 (B01). Now I am sending IDocs from the Integration Server to the Business System.
To do this I set up an RFC Destination B01CLNT010 and a port SAPB01 which is referenced by the Idoc Communication Channel.
My question now is: In the RFC Destination I need to specify a user id. What authority must that user id have to succeed with my Idocs.
I tried a user (on B01) with the roles SAP_XI_IS_SERV_USER and SAP_XI_APPL_SERV_USER but the sending of an Idoc failed (in SXMB_MONI it shows a red flag in the 'Outbound Status' - actually where can I follow up on this error?).
When I assign SAP_ALL profile to the user, it works fine. But I'm sure there must be something inbetween that is also sufficient for the purpose.
Your help is appreciated,
regards,
Peter

Hi Peter,
If IDocs fail while being sent from XI to SAP, there should be an entry in tRFC queue (transaction SM58). This entry should typically give an error like "missing auth. to send IDoc XXX".
This means, that the user is missing the authorizations to send this IDoc to R/3. The necessary auth. object is B_ALE_RECV which allows the reception of IDocs via RFC with the according message types you are going to send.
Additionally if your Inbound IDocs are configured for immediate processing the user sending the IDocs needs the according application authorizations e.g. for an Orders IDoc the user needs authorizations to post an order.
Best regards
Christine

Similar Messages

Why do we need to define RFC destination and user for material replication

Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
Ranjan

Hello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo

SRM-SUS RFC Destinations for matching of user data.

Hi,
A customizing question...
I get SRM and SUS in separated boxes... SRM is with all the SAP landscape (R/3, XI, MDM, etc..) and SUS in the DMZ to allow vendors to reach the web site....
So, there's an activity to setup the connection to replicate the bidders created in SUS to SRM...
the IMG activity is: SPRO-> SRM -> SUS -> Technical settings -> Define RFC destinations fot matching of user data.
There are 4 parameters to input:
Destination -> (SRDCLNT400).
System name -> (SRM)
FM BPID -> (empty)
Role -> (SAP_EC_BBP_BIDDER)
So, my question is: What's the name of the FM that should input here FM BPID?
I think that it is a FM in SRM side, but i don't know how to find it, is there any documentation about this RFC?
All your replies will be appreciated and rewarded if useful...
Regards,
Gerardo.

Nishant,
BBP_SUS_BUPA_REGID_CHECK is the FM in charge to check out the string generated by the system for a vendor that was invited to register tu SUS via email... so i don't think that it will work..
Let me redefine my question cuz maybe it is not so clear...
When you invite a vendor, he will register and will get an administrator user, with which he will create more users (bidders) to review and post quotes.... But, since the bid engine is independent from SUS (at SRM side) the SUS user will need to be replicated at SRM with same user name and password... Then when they go to the BID option in SUS menu a new browser window will prompt for login...
If you are running SUS in a different box from SRM, there's an IMG activity to setup the RFC name to replicate the user names with bidder role.. This is the step where i'm stuck, cuz in the documentation there isn't any references to this RFC...
So, if you have something that will help me, please reply, i will reward useful answers...
Gerardo.

Communication User Is Enough In RFC Destination Userid-Parameter

Hi Guys,
   I Have The Rquirement Like,i have to call the remote function module which is in quality server from the development system,so for that i have created rfc destination in development system in the logon&security,i have given the userid,which was created by the basis team,this user is a communication user,not a dialog user,with this communication user, iam unable to connect to the system through program
         call function fm1 destination des.
i would like to know whther we can conncet to the system through the communication user,or dialog user is must.please give ur valuble suggestion on this query..
                         thanks in advance...
thanks&regards
   srinivasulu.j

Hi Ranganath,
    Thanks For u r valuble suggestion,with the communication user given in rfc destination ,the connection is not establishing,when i click on test connection button in sm59,it is not showing any error,but when iam trying to execute form the program by calling the remote function module by giving the rfc destination,i checked in debugging,it is not connecting to the other sytem,pls provide some solution for this..
thanks&regards
srinivasulu.j

Alert on locked users in RFC Destinations

Hi,
I have setup availability of RFC Destinations but also need to monitor the user in the destination. We need to know if the user is locked or not. Any idea how I need to do this ?
Thanks,
Ann

Hi Ann,
the same can view in RZ20 ccms monitor templates-> availablity and performance overview ->availablity-> Rfc destinations.
to assign the rfc destinatiion define the method in RZ21->method definition->choose CCMS_RFCDest_Availability_Col(availability of RFC destinations)->set RFC destination to parameter RFC_DEST, if you want to define more rfcs can define as new colloum.
[Note 1069130 - RFC Destination Monitoring: |https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1069130]
check the posiblities.
Jansi

Check RFC destination and Valid User

HI all!
I'm trying to verify the RFC destination in SM59 transaction. I have 2 trusted connection to other sap system with an associated account. My goal is to verify that there isn't problem regarding the account and the connection, the best it's something that try to made a remote logon and give an exception in case of:
- account isn't working
- account is working but there's no connection (think about a network problem)
Which function i could try to use to accomplish this goal ?? any idea or just made report?
I have only make a function using a BDL_SERVER_PING but isn't enough.
Help are Very apreciated
thanks!

Hi,
Use fm RFC_GET_SYSTEM_INFO
a®

How to create RFC Destination without using SM59?

Hello all:
We are troubleshooting an issue. An user created a RFC destination. He claims that he did not use SM59. We checked his access and do not have SM59 in his roles.
He configured VIRSA FireFighter. During the configuration, he created RFC destination. Document says use SM59 or contact BASIS Admin. He claims that he used a config table and he don't remember the config table name. RFC screen shows his ID as creator of the RFC.
We are trying to understand how an RFC can be created (outside of SM59) and plug the security hole in the environment.
Any insights would be appreciated.
--Anand

The FireFighter solution changes the RFC destination of the service user "on the fly" without S_TCODE checks for 'SM59'. But if I can remember correctly when looking into this, it does not create the RFC destination (in SM59) "on the fly".
> He claims that he used a config table and he don't remember the config table name.
Theoretically this is possible - a config table to define the name of the destination, and then create it if it does not exist yet (when used).
Otherwise, see SAP note 587410 and restrict (remove) his authority for the test environment (concentrate on S_DEVELOP, not S_TCODE - as you have also experienced).
Cheers,
Julius

RFC DEstination Error

After creating the Destination in sm59 I tested the connection.
When testing the connection, it gives the result as
Connection type: R/3 connection
Logon: 2 msec
 0 KB: 0 msec
10 KB: 1 msec
20 KB: 1 msec
30 KB: 1 msec
I'm trying to create a rfc destination to php in the same system with the same hostname in which SAP is also running...I'm working with ides.
but when I try to run my php file inside sapclasses in www directory it gives an error as
SAPRFC extension not loaded
Message: This script use SAPRFC extension module for PHP and the extension isn't loaded. You can download it with installation instructions from http://saprfc.sourceforge.net. If you have already the extension compiled and installed, check your php.ini configuration

Here's a full text of the error I receive
Error when processing your request
What has happened?
The URL http://<host_server>.com:<port>/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BQ1 : com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized
The error occurred on the application server <host_server> and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_RSRD_F_DISTRIBUTOR_RT~DISTRIBUTE of program CL_RSRD_DISTRIBUTOR_KM========CP
Form: EXECUTE_NODES of program CL_RSRD_SETTING===============CP
Form: EXECUTE_NODES of program CL_RSRD_SETTING===============CP
Form: EXECUTE_NODES of program CL_RSRD_SETTING===============CP
Form: EXECUTE of program CL_RSRD_SETTING===============CP
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BQ1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server <host_server> in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server <host_server>. In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:COLLINS -l:E-s:BQ1-i:<host_server>_BQ1_00 -w:0-d:20051012-t:121010-v: RABAX_STATE-e:CALL_FUNCTION_REMOTE_ERROR
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

SSL certificates not visible while RFC destination creation

Hi all,
I am setting up an RFC destination to connect to external server and which uses SSL certificates for its authorization.
So i have imported the Client certificates into STRUST.
While setting up an RFC connection of type G, in the security tab when we select the SSL security certificate radio button, will we be able to see the certificates(in the combo box) that we have imported in STRUST.
Currently, though i have imported the Client certificates into STRUST, i am not able to see them in the SS security certificates combo box.
Kindly help me out.
Cheers,
Siva Maranani.

Well, first of all we should avoid confusion by using the term "ABAP destination" rather than "RFC destination" (although ABAP transaction SM59 still has this old title).
When referring to an "ABAP destination of type G" we are talking of an outbound http connection to a non-ABAP server (e.g. an SAP J2EE server or any other http server).
I'm not sure whether you are aware that in this context "SSL client certificate" refers to the ABAP system (which is the SSL client in this scenario). This is different from scenarios where "X.509 client certificate" refers to a certificate which is assigned to an individual user (using a web browser). In the given scenarios, where two systems are the communication peers, SSL cannot be used for user authentication. That fact is often misunderstood.
By default you'll find 3 different SSL certificates (actually: PSEs) in an ABAP system (which can be used only after enabling SSL, of course - see note 510007 for instructions):
- SSL Server
- SSL Client (anonymous)
- SSL Client (Default)
Well, the "SSL Client (anonymous)" is actually not really a "client certificate" but used for outgoing http requests where you do not intend to send your own SSL client certificate. Since you cannot use the server's SSL client certificates for user authentication it might make sense to use "SSL Client (anonymous)" is most cases.
Please notice: you have to add the server's SSL certificate (respectively the root CA certificate and potentially intermediate CA certificates) to the certificate list of the "SSL Client (anonymous)" PSE (using STRUST). By default, that list is empty - consequently no SSL server certificate is trusted (in contrast to a web browser which is already shipped with a long list of "trusted CAs").
Only when the (remote) server demands SSL client certificates it might make sense to use either "SSL Client (Default)" or to define a new SSL client certificate (for the ABAP system that submits the https request).
Please notice:
SSL client certificates need to be issued by an Certification Authority (CA) in order to be accepted by the SSL server.
In addition to importing the SSL server's certificate to the certificate list of the SSL client PSE (see above: anonymous SSL client) you also need to export the root CA certificate (and potentially all intermediate CA certificates) of the SSL client certificate and import it to the (remote) SSL server's keystore (kindly refer to the manuals of that server for instructions).
Kind regards, Wolfgang
PS: I assume that you have imported some certificates to the certificate list of a SSL client PSE. In SM59 only those SSL client PSEs are listed: "SSL Client (anonymous)", "SSL Client (Default)" and all SSL client PSEs that you might have defined in addition (using transaction STRUST => Environment => SSL Client Identities).

RFC Destination Connection Pool requirement

Hi Experts,
I have a custom webdynpro java application to display number of work items pertaining to that particular user in a backend.
There are users who dont use this functionality as well. But the requirement is to place this application in home screen.
I have used both metadata and modeldata with hard coded user since we did not want error messages to appear for users who do not have backend access.
Application & Access Details
Application Location : Home Screen
Concurrent Users : 600 concurrent users maximum possible value
Connection Usage : Close connection immediately using disconnectIfAlive() method.
Now I need to configure JCO Pool Size , Max Connections, Wait Time for the RFC destination.
I have read a lot of post and documents but could not acheive clarity of thought on this.
Kindly let me know what values I should give in these fields for optimal performance and no connection issue for users.
Regards,
Porselvan

Hi Muthavudaiyan,
Hope you are doing good.
Basically from the JCo perspective, there are only 5 parameters that are involved here:
jco.destination.pool_capacity:
Maximum number of connections that are held open in the pool for reuse (default: 1)
jco.destination.peak_limit:
Maximum number of connections that can be obtained from a pool at peak usage times
jco.destination.max_get_client_time:
Maximum time to wait for a free connection if the peak limit is reached before exception is thrown
jco.destination.expiration_time:
Timeout period after which pooled idle connections can be closed (default: 600000ms = 10mins)
jco.destination.expiration_check_period:
Regular time interval for checking if pooled connections have expired and will be closed
The values are determined by the application in question. The ideal values have to told to you by the application developer; there are no two ways about this.
Thank you and have a nice day :).
Kind Regards,
Hemanth

Unable to change RFC destination in IT Performance reporting wizard

Hi Experts,
I am setting up IT Performance Reporting in my Solman EHP1 system. In the first page of the PErformance reporting wizard, it asked me for RFC destination from BI to Solman(1st field) and Solman to BI (2nd field). I initially entered an existing RFC destination that we are already using in a separate application that has a user with very-limited authorization. Now, I am trying to change the RFC destination by running the same "Configure IT Performance Reporting" wizard but both fields are already GREYED out.
I tried deleting the RFC destination previously defined in an attempt to reenable the fields but only the 2nd field was enabled. When I try to continue the setup, it results into a Shortdump because it is still looking for the initially defined RFC dest which is defined in the 1st field that cannot be edited.
SAP has not yet provided us with a solution.Your help is greatly appreciated.
Thank you very much.

You canprovide the RFC destination in DOE administration portal. Goto Configurations link and search for "BACKEND DESTINATION" parameter in "BACKEND CONFIGURATION" link. Here you can provide RFC destination at SWCV level or at Data object level.
After deleting RFC destination in SM59, it will never take you to backend system.

No RFC Destination maintained

Hi Experts,
I am doing User Exit for MIGO.
I have done it successfully.but problem comes when the email is sent to the vendor, MIGO is getting DUMP.
So, to cross check i have remove the User Exit of MIGO. but to my surprise when i press POST button in MIGO the similiar DUMP comes.
So wht is the solution for this.
For your Information DUMP message is:
Runtime Errors MESSAGE_TYPE_X
Date and Time 06.12.2007 14:57:55
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "vngsap1"
Network address...... "192.168.0.10"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "VNGSAP1"
Database type..... "MSSQL"
Database name..... "EC6"
Database user ID.. "ec6"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 102
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 21953056
Heap.... 0
Page.... 73728
MM Used. 15443024
MM Free. 1280936
User and Transaction
Client.............. 800
User................ "VEDHRUV"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... " "
Program............. "SAPLMBWL"
Screen.............. "SAPLMIGO 0001"
Screen line......... 18
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
 when a goods movement for an inbound or outbound delivery is posted
30
 directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
 CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
 BKPF as well. There is no other way to forward XBLNR to FI as not
33
 every document is posted by MB_CREATE -> a new function module in
34
 MBWL for transferring the information, called by FI, meant to load
35
 the complete function group for all MBxx postings when this isn't
36
 required (Performance). Would be the better way to transport the
37
 information after switching off MBxx in later release.
38
 corresponding IMPORT ... FROM MEMORY ... can be found in
39
 AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
 MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
MIGO_STATUS
SY-UCOMM
OK_POST1
SY-TITLE
Goods Receipt Purchase Order 4500017132 - shah
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071206
SY-UZEIT
145755
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
6 METHOD SAPLMIGO LMIGOKG1 921
LCL_MIGO_KERNEL=>GOODS_MOVEMENT_POST
5 METHOD SAPLMIGO LMIGOKD1 309
LCL_MIGO_KERNEL=>DOCUMENT_OPERATION
4 METHOD SAPLMIGO LMIGOKD1 9
LCL_MIGO_KERNEL=>DOCUMENT_POST
3 METHOD SAPLMIGO LMIGOST2 124
LCL_MIGO_STATUS=>LIF_MIGO_FRAME~OKCODE_HANDLER
2 METHOD SAPLMIGO LMIGOFR2 172
LCL_MIGO_FRAME=>OKCODE_DISPATCH
1 MODULE (PAI) SAPLMIGO LMIGOPAI 11
PAI_OKCODE_DISPATCH
Chosen variables
Name
Val.
No. 7 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
2222
0000
0000
0000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_3831[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 396
TABH+ 0(20) = 0000000088F26C31000000008C010000F70E0000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04E90400E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x88F26C31
shmId = 0 (0x00000000)
id = 396 (0x8C010000)
label = 3831 (0xF70E0000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x40F26C31
>>>>> 2nd level extension part <<<<<
tabhBack = 0xA0F5EA30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
2222222222
0000000000
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSPR_KEY
00000000
222222222222222222222222222222222222233333333
000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000
SCREEN
GODYNPRO-DETAIL_TAKE
4445455424454445544422222222222222222222222222222222222222222222222222222222222222222222222222
7F49E02FD45419CF41B500000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
5000011865
3333333333
5000011865
0000000000
0000000000
XMKPF-MJAHR
2007
3333
2007
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WE50AMS X XX XXXXXH
3335433445222222222522222222222222225522555554222222
80075501D3000000000800000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 6 Ty. METHOD
Name LCL_MIGO_KERNEL=>GOODS_MOVEMENT_POST
ES_EMKPF_OLD
5000011865200700000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
5000011865200700000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LS_EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
|
| E0001000 |
| 60009000 |
| LS_EMKPF-SUBRC |
| 0 |
| 0000 |
| 0000 |
| C_MOD_ON |
| 1 |
| 3 |
| 1 |
| 0 |
| 0 |
| GOITEM-ERFMG |
| 0.0.0.0.0.0.1. |
| 0001000 |
| 000000C |
| LS_EMKPF-MBLNR |
| |
| 2222222222 |
| 0000000000 |
| 0000000000 |
| 0000000000 |
| SY-XPROG |
| SAPLBPFC |
| 5454454422222222222222222222222222222222 |
| 310C206300000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| SY-REPID |
| SAPLMIGO |
| 5454444422222222222222222222222222222222 |
| 310CD97F00000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| SY-MSGID |
| /SAPSLL/PLUGINR3 |
| 25455442545444532222 |
| F3103CCF0C579E230000 |
| 00000000000000000000 |
| 00000000000000000000 |
| TV_GODEFAULT_TRANSFER-CX |
| <initial> |
| <initial> |
| <initial> |
| SPACE |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| SY-MSGNO |
| 002 |
| 333 |
| 002 |
| 000 |
| 000 |
| SY-MSGV1 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| ES_EMKPF_OLD-MSGV1 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV2 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV3 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| SY-MSGV4 |
| |
| 22222222222222222222222222222222222222222222222222 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| GODEFAULT_TV |
| 101 GR goods receipt |
| 2222223332245266667276666772222 |
| 000000101007207FF43025359040000 |
| 0000000000000000000000000000000 |
| 0000000000000000000000000000000 |
| LS_EMKPF-MJAHR |
| 0000 |
| 3333 |
| 0000 |
| 0000 |
| 0000 |
| OREF_TIP |
|
D0002000
90006000
TV_GOSPLIT-CURRENT_LINE
<initial>
<initial>
<initial>
No. 5 Ty. METHOD
Name LCL_MIGO_KERNEL=>DOCUMENT_OPERATION
I_SIMULATE
2
0
0
0
I_SIM_VALUES
2
0
0
0
I_ERROR_ONLY
2
0
0
0
E_OK
2
0
0
0
ET_XMSEG
Table[initial]
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
LS_EMKPF
5000011865200700000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
5000011865200700000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LT_EMSEG
Table IT_4407[2x744]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_EMSEG
Table reference: 460
TABH+ 0(20) = F06C0731F83FE73000000000CC01000037110000
TABH+ 20(20) = 02000000E8020000FFFFFFFF0400000040420100
TABH+ 40( 8) = 10000000C1308001
store = 0xF06C0731
ext1 = 0xF83FE730
shmId = 0 (0x00000000)
id = 460 (0xCC010000)
label = 4407 (0x37110000)
fill = 2 (0x02000000)
leng = 744 (0xE8020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001704
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xB8902E31
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3425 (0x610D0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xE0D66931
>>>>> 2nd level extension part <<<<<
tabhBack = 0x00F11C31
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_XMSEG
Table IT_4408[2x2364]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_XMSEG
Table reference: 464
TABH+ 0(20) = A0BEF93070D7693100000000D001000038110000
TABH+ 20(20) = 020000003C090000FFFFFFFF0400000030310100
TABH+ 40( 8) = 04000000C1308401
store = 0xA0BEF930
ext1 = 0x70D76931
shmId = 0 (0x00000000)
id = 464 (0xD0010000)
label = 4408 (0x38110000)
fill = 2 (0x02000000)
leng = 2364 (0x3C090000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001613
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28DF3031
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3511 (0xB70D0000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x28D76931
>>>>> 2nd level extension part <<<<<
tabhBack = 0x90F4EA30
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_IMSEG
Table IT_4396[2x2792]
FUNCTION-POOL=MIGOCLASS=LCL_MIGO_KERNELMETHOD=DOCUMENT_OPERATIONDATA=LT_IMSEG
Table reference: 465
TABH+ 0(20) = D0D5693190D7693100000000D10100002C110000
TABH+ 20(20) = 02000000E80A0000FFFFFFFF04000000E0410100
TABH+ 40( 8) = 04000000C1308001
store = 0xD0D56931
ext1 = 0x90D76931
shmId = 0 (0x00000000)
id = 465 (0xD1010000)
label = 4396 (0x2C110000)
fill = 2 (0x02000000)
leng = 2792 (0xE80A0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#001702
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xE01BC930
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 3413 (0x550D0000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8626B31
collHook = 0x00000000
ext2 = 0x80626B31
>>>>> 2nd level extension part <<<<<
tabhBack = 0xD88C0331
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
LT_CANCEL
Table[initial]
ABAP_TRUE
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
|
| F0000000 |
| 70008000 |
| SYST |
| ######################################T##########################################ÿ##### C#### |
| 0000000000000000000000000000000000000050000000005000000000000000000000000000109000F00050240000 |
| 100010000000000000001000100010000000004000C0B0403000000000000000000000000000B00000F00080030400 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000 |
| 00000000000000000000000000000000000000000000000010000000000000000000000000000000000000D000000C |
| LS_XMKPF |
| 80050000118652007WEWEPR20071206200712062007120614575300000000VEDHRUV |
| 3333333333333333354545533333333333333333333333333333333333333544455522222222222222222222222222 |
| 8005000011865200775750220071206200712062007120614575300000000654825600000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| ME |
|
F0000000
D0002000
%_SPACE
2
0
0
0
L_NO_ITEMS
2
0
0
0
TV_GODEFAULT-CX
<initial>
<initial>
<initial>
LCL_MIGO_GLOBALS=>CALLER_SYTCODE
MIGO
44442222222222222222
D97F0000000000000000
00000000000000000000
00000000000000000000
LCL_MIGO_GLOBALS=>RETAIL_CONSIGNMENT_ACTIVE
2
0
0
0
%_FSREG_001
No. 4 Ty. METHOD
Name LCL_MIGO_KERNEL=>DOCUMENT_POST
E_OK
2
0
0
0
ME
|
| F0000000 |
| D0002000 |
| ABAP_FALSE |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| LCL_MIGO_GLOBALS=>EXTERNAL_CALL_LEAVE_AFTER_POST |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| %_ARCHIVE |
| |
| 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| No. 3 Ty. METHOD |
| Name LCL_MIGO_STATUS=>LIF_MIGO_FRAME~OKCODE_HANDLER |
| I_OKCODE |
| OK_POST1 |
| 4455455322222222222222222222222222222222222222222222222222222222222222 |
| FBF0F34100000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000 |
| OREF_BADI_LOG |
|
D0002000
5000A000
%_FSREG_001
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>KERNEL
|
| F0000000 |
| D0002000 |
| %_VIASELSCR |
| # |
| 0 |
| 4 |
| OREF_DETAIL_BATCH |
|
60009000
0000F000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 2 Ty. METHOD
Name LCL_MIGO_FRAME=>OKCODE_DISPATCH
I_OKCODE
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
L_MSG_STRING
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_OKCODE
OK_POST1
4455455322222222222222222222222222222222222222222222222222222222222222
FBF0F341000000000000000000000000000000000000000000000000000000000

Hi Dhruv Shah,
 Can you please tell me which user exit you are using for doing that. coz i am in need of that.
Thanks,
Ajeeth

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

RFC Destination could not be created in TREX administration tool

Hi All,
Recently i installed the TREX server, I am trying to connect the ABAP system with the RFC connection. I entered all necessary data for the RFC connection it giving error as
RFC Destination could not be created.
To solve the above problem i created one RFC connection of type TCP/IP in ABAP server eventhough it is not solved.
Can i have the solution for the above problem?
Regards,
Vivek.

Hi Michale,
Thanks for your quick response; I tried all the mentioned possibilities in that help document, still i am facing the same problem.
It is giving the below error
Connect to SAP System failed.Possible reasons:
-Logon data incorrect
-Password is not uppercase(must also be uppercase)
-SAP system user locked
-SAP user not in specified client
-SAP User rights are insufficient
-SAP system not reachable
-saprfc.ini unavailable or entries incorrect
-TREXTcpipClient.ini section[communication],parameters rfcdestination, sapsystem not set
-SAP system Basis component below 6.20 or SP too low
-->check also latest TREXTcpiplient trace file entries.*
The above all are check by me everything is fine.
The below information from the saprfc.ini file
DEST=NPI
TYPE=B
MSHOST=server1
GROUP=server1_group*.
Is there any mistake, please let me know.
Regards,
Vivek.

Creation of RFC destination for SAP-Access Connectivity

Hi,
 I want to create a RFC destination for SAP-Access connectivity.
Can I get some help regarding it's connection type,activation type and gateway options required for the same.
Regrads,
Anthony D'souza

Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME Raj Logical name for connection
DBMS MSS Microsoft SQL Server
USER_NAME <User name> For SQL Server
PASSWORD <password> " "
CON_ENV MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO Availability type for an open database connect
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Raj

RFC Destination User Authority

Similar Messages

Maybe you are looking for