RFC Destination was incorrect,send complete BP Data again from CRM to R3

Hello All
Iam facing in issue in CRM - BP Application due to incorrect RFC Destination maintained for SAP R3.
Our CRM Testing system (CRO - Client 300) is connected to R3 Testing System (NCQ - Client 300), but when CRM system went for refresh, RFC Destination was overwritten, and due to that CRM system started pointing to wrong R3 server (NCD - Client 002).
Till we got to know the problem, User had created a BP in CRM and it had flown to incorrect server. later we corrected the RFC Destination , but now the issue is that If I make any small change in CRM BP data, Bdoc is going in error state and message says:
Messages for business partner 0090001677:
No customer is assigned to business partner 4A13ACE0AB356006E10000000A212
Entry 0500 does not exist in - check your entry
I tried to send BP data through middleware tCode /CRMM_Bupa_Send as well, but Bdoc gain got in error state saying :
Entry 0500 does not exist in - check your entry
I think, these errors are coming because system is assuming that it has already sent the data to R3, and it expects certain data to be present in R3 system, which it is unable to find since data for corresponding BP is not present in SAP R3.
I there any way, transaction through which I can send complete BP data from CRM to R3??? Please help.
Edited by: Surbhi Goel on Jun 2, 2009 3:25 PM

Hi Surbhi,
Could you try transaction CRMM_BUPA_MAP in order to see what mapping the system thinks there is (if any). It then allows you to send (same as BUPA_SEND) or retrieve data. I guess this will run into the same error, but it might be worth a try.
Hope this helps.
Sincerely,
KZ

Similar Messages

"iTunes was unable to load class data information from sync services"

I own iTunes 10.5 beta 3 64-bit for my 64-bit windows 7 pc, and it gives me this message whenever I try to sync ANY of my devices: "iTunes was unable to load class data information from Sync Services". I own an old iPod video and an iPhone 4 with iOS 5 beta 3. I've tried uninstalling all Apple products, searching through my hard drive and deleting everything Apple, cleaning the registry, EVERYTHING. I've reinstalled at least 4 times now. The problem refuses to become fixed. I've searched every article online possible, and none of the solutions have worked. Is there anything I can do to get my stuff back on to my devices???

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Data transfer from CRM to R3

What exact data transfer from CRM to R3, on completion of a sales Order. I am new in the field, need some good example?

HI Sajjad,
Transafer of order from CRM to R/3 involves following activies.
Setup RFC destination between CRM & R/3
Create a R/3 Site (Transaction: SMOEAC) and assign a subscription named
(Sales Document (Mesg) created from publication Sales Document(Mesg)).
In R/3 maintain Document type with same name as Transaction type in CRM, item category with same name as item category in CRM, Item category determination with same as in CRM.
Master data i.e. Product in CRM should be present with same name as material in R/3. BP in CRM should be present with same name as Customer in R/3
Organizational data is maintained in CRM.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Data Flow from CRM to BW

Dear SAP Experts,
Greetings for the Day!
I am looking forward for some information on the Data flow happening from CRM to BW system. Some of the few queries are as below:
Do we have any settings for this data flow in Transaction SMOEAC.
How does the below setting impact the BDOC flow in BW. Also, if we un-check the “Do Not Snd”, will BDOCs
flow to BW system ? <PFA>
PS: We are on CRM 7.0 with EHP2.
Thanks!
Regards,
Kanika

Hi Kanika,
Data flow from CRM to BW happens via XIF using IDocs. You can check in transaction WE21 for your RFC destination of BW and the output parameters, which decides what data would be send to the corresponding destination.
You can also check my blog:
External Interface (XIF) Setup but this is XIF setup in general and not specific to BW.
Hope this helps.
Best Regards,
Shanthala.

Data Extraction from CRM to BW

Hi,
I just need some information/help on BW Data Extraction from CRM, it would be great if some one could help out or mail some related help documents.
Currently we are implementing the complaints module in CRM simultaneously on the BW side we have identified an info cube for complaints 0CSAL_C09, but this cube and its ODS source does not have all the required fields like (newly created text types, serial number etc), so how these tables and fields can be identified in the source system and added to extract structure in CRM. Also what is the table in which the CRM transaction data would be stored.
Especially i require the newly added text types in CRM to appear in BW, there are around 5 new text types are added and user can enter free text, i need these information to be captured in reports. kindly mail me the steps to [email protected]
Thanks
Akila.R

hi,
try these links
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
this:
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
regards,
pankaj singh
reward if helpful

Data Extraction from CRM

Hello Experts,
I am presently working on data extraction from CRM system. I understand that there are three ways of data extraction from the CRM system:
i) Using Middleware integration
ii) CRM BI integration through XI
iii) Generic ETL process as used when extracting data from other SAP systems
Can anyone please suggest which one is the best method to follow and why?
Thanks & Regards
Nikhil

Hi,
The Third option is the best one I would say.
Why to use any other way line XI integration or anything like that which involves more complexity in terms of development , maintenance and most importantly COST. SAP is providing you the standard set of extractors, it will be a wise choice.
Regards
Pratap Sone

BP Data replication from CRM to R/3

Hi All,
I could not see the BP replicated to R/3. The status is processing for 'BUPA_MAIN' type of BDOC.
-I have set RFC (not trusted RFC)
- At PIDE
CRM->R/3 [ type A (classification) is mapped to 0001 (Account group)]
and vice versa.
Waiting for any sugessions.
Regards,
Eddie

Hi,
Admin console (subscriptions based on rep.objects & publications) is for the CRM outbound process, based on CRM changes -> cannot be used for the initial load.
The download objects can be used for initial loads, and this in three directions: CRM-> R/3, R/3-CRM and CRM->MSA. If you wish to download data from CRM to R/3, select CRM as the source site and R/3 as the destination site in an initial load.
Normally if your RFC settings and filters are defined corrrectly, you should get an indicator that the download is in a running state. After that you can check the queues (smq1 & smq2) and the bdocs (smw01) for the results of the download.
hope this helps,
Michael.

Data Migration from CRM 5.0 to CRM 7.0

Hi Friends,
We are into a re-implementation on CRM 7.0. The old system was on CRM 5.0.
Since this is not an upgrade, the data will not copied over from the old system into the new system.
So, now I would like to know how to migrate data (master/transaction) from CRM 5.0 into 7.0.
I have read that we can make use of BAPI/LSMW/IDOC/XIF adapters to push info into CRM.
But, the customer wants all the historical data to be in the new system.
I think master data can be handled.... but how to migrate the transaction data?.... i mean the number ranges/document flow.. and other relationships.. how can we maintain the same links into the new system?
If it was a migration from legacy system into the SAP CRM, we could have gone ahead with new number ranges etc... but this migration is from SAP to SAP.
Also, we will have ECC6.0 connected to CRM 7.0. ANy additional things to be taken care of when the connection is live in DEV/QA/PROd instances?
Any pointers to this ?

Hi Gary,
As per my understanding, your data migration involves quite complex scenarios covering the CRM and ERP box. As the customer needs the old data to be present in the new implementation, the old data needs to be migrated from the CRM 5.0 to CRM 7.0. For the migration to happen, you need to setup the customization (like the number ranges,Condition Data Tables, etc ). Then only you can proceed with the data migration. Also, you need a proper backup plan as this involves proper backup of the data.
Once the setup is complete, you need to configure the ECC6.0 with the CRM7.0 system. Here also, you need to do a lot of settings and performing the Initial loading of the Adapter Objects. But before you proceed with the entire operation, the entire system landscape must be properly defined with appropriate settings.
My recomendation is to take help of SAP Consultants and data migration experts as they are the best persons to guide you on this. Also it would be great if you can go through the SAP Best Practices documents which are best repository documents to guide you on this.
Have a look on this link for an overview of the CRM Data Migration
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Hope this helps.
Thanks,
Samantak.

Data Extraction from CRM and Informatica

Hi Guru's,
Could any one tell me how to extract the data from the CRM and Informatica in to BW.
Please give me the steps.
Thanks in advance....

Steps for Extracting data from CRM:
Configuration Steps
1.Click on ->Assign Dialog RFC destination
If your default RFC destination is not a dialog RFC destination, you need to create an additional dialog RFC destination in addition and then assign it to your default RFC destination
2.Execute Transaction SBIW in CRM
3.Open BC DataSources.
4.Click on Transfer Application Component Hierarchy
Application Component hierarchy is transferred.
5.SPRO in CRM .Go to CRM->CRM Analytics
6.Go to transaction SBIW-> Settings for Application specific Data Source ->Settings for BW adapter
7.Click on Activate BW Adapter Metadata
Select the relevant data sources for CRM sales
8.Click on Copy data sources
Say yes and proceed
9.Logon to BW system and execute transaction RSA1.
Create a source system to establish connectivity with CRM Server
A source system is created. (LSYSCRM200)(Prerequisites: Both BW and CRM should have defined Back ground, RFC users and logical systems)
10.Business content activation for CRM sales area is done
11.Click on source system and choose replicate datasources.
KJ!!!

Request data again from delta queue to PSA , but error

Hi,expert
I extract 1 record from delta queue to PSA,it is success, and then I set request to 'Red' in the PSA monitor, and delete that request,and start infopackage again ,
then 1 delta record was loaded, so, it is success.
but,
when I repeat the upon operate(set request to 'red',and request data again), the system then alert below error:
Last delta update is not yet completed Therefore,
no new delta update is possible You can start the request again if the last delta request is red or green in the monitor (QM activity)
why?
Edited by: xuehui li on Apr 27, 2010 1:44 PM

Hi ,
If your last delta was red only then system will ask to repeat the same request it is called Repeat Delta,
if you make your request Green then you won't get the message because this then assume that your last delta was successful ,
But if you don't want to loose your data in DELTA process, then you must do Repeat Delta ,
if you have very less data in your ODS and you are not sure about what is updated then
you may delete all the data from ODS and delete the INIT request and initialise the load again.
Let me know if you have any doubt,
Cheers,
Sukhi

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Find data sent from CRM to XI

Hi ,
We are sending some data from CRM to XI system.Is there any way or transaction code by which we can check that on particular date what data has been sent by CRM system to XI.
its an argent requirement so if any one have any idea , it would be a great help for us.
No need to mention that points will be awarded.
regards
Pankaj Giri

please go to the tcode SXMB_MONI and check the message

Capturing Dynamic lengths during data transmissions From CRM to Others

hi friends
i am sending data from CRM to SAP and then SAP to CRM
during the transmiision of data one of the field amount have length 30 in CRM and 17 in SAP, while sending values From CRM if amount length exceeds 17 then my application is going to short dump.
i have validation part in SAP Server where i can do some code to avoid short dump, but wat exactly i need to code to capture dynamic lenght of CRM amount Values
can any one have idea to capture dynamic lengths of fields during the transmissions
Regards
Anil P

Hi Surender,
I think i still have problem. I have like 26 fields in dynamic selections. I am filling one field and checking for that one in the program. Below is my program and please let me know where i doning wrong
TYPES: RSDS_SELOPT_T LIKE RSDSSELOPT OCCURS 10.
TYPES: BEGIN OF RSDS_FRANGE,
FIELDNAME LIKE RSDSTABS-PRIM_FNAME,
SELOPT_T TYPE RSDS_SELOPT_T,
END OF RSDS_FRANGE.
TYPES: RSDS_FRANGE_T TYPE RSDS_FRANGE OCCURS 10.
TYPES: BEGIN OF RSDS_RANGE,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
FRANGE_T TYPE RSDS_FRANGE_T,
END OF RSDS_RANGE.
DATA: WA_RSDS_RANGE TYPE RSDS_RANGE.
CALL FUNCTION 'RS_REFRESH_FROM_DYNAMICAL_SEL'
EXPORTING
    CURR_REPORT              = sy-cprog
    MODE_WRITE_OR_MOVE       = 'M'
IMPORTING
   P_TRANGE                 = WA_RSDS_RANGE
EXCEPTIONS
NOT_FOUND                = 1
WRONG_TYPE               = 2
OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Data transfer from CRM to SAP R/3

Hi All,
Please let us know how to transfer the data from CRM(sibel) system to SAP R/3.
I want to pull oppurtunity data from CRM to R/3 system.Could somebody throw some idea on this please.
Regards
Mahesh

1. Using XI middleware.
2. CRM(sibel) ---> intermediate table ---> SAP R/3.
Pradeep

Ibase Data Download from CRM 5.0

Hello Gurus,
I want download the following data from CRM 5.0 in a text file ( tab delimited ) :-
IBASE_HEADER -- can be obtained from FM CRM_IBASE_GET_DETAIL
IBASE_COMPONENT -- can be obtained from table IBIN
IBASE_TEXT
IBASE_PARTNER
IBASE_ADDRESS
IBASE_STRUCTURE
IBASE_STATUS
IBASE_COMPONENT_TEXT
IBASE_COMPONENT_ADDRESS
IBASE_COMPONENT_PARTNER
IBASE_COMPONENT_EXTRA
IBASE_ADDRESS_EXTRA
IBASE_COMPONENT_ADDRESS_EXTRA
But for the other data .. what FMs should I use ??
With Regards,
Kallol

HI,
Below are the few tables that you can refer:
IBASE_TEXT           :            CDBD_IBIBT
IBASE_PARTNER     :          CDBD_IBPART
IBASE_ADDRESS          :     CDBD_IBADDR
IBASE_STRUCTURE          :    CDBD_IBST
IBASE_COMPONENT_TEXT      : IBINT
Regards,
PePe
Edited by: PePe on Jun 10, 2009 11:23 AM
Edited by: PePe on Jun 10, 2009 11:23 AM

RFC Destination was incorrect,send complete BP Data again from CRM to R3

Similar Messages

Maybe you are looking for