RFC does not get the updated data

Hi Experts,
I am not getting the updated data via RFCs.
The scenario is like this.
Step 1: I open the Application running on System "B".
Step 2: I add a record in second Application which is on system "A".
Now I want the same data to be reflected on Application running on System "B" on some event.
I observed the data is never reflected in Application running on System "B", but when I refresh the page of this Application, I get the updatred data. Do you have any clues why this is happening.
Best Regards,
Arti.

Hi,
Can you be bit more clear about the requirement. It is logical that without refresh updated data wont be shown.
Thanks,
Vinod.

Similar Messages

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

When i press sync in iTunes my iPhone 4s does not get the my music how do i fix this

when i press sync in iTunes my iPhone 4s does not get the my music how do i fix this

no, and i have spent my entire spring break with a dead iphone 4s, no access to my iphone mail accounts, can't get into my text service app, and can't get into notes. oh yeah, all of my music is gone. thanks a bunch for this wonderful upgrade.
i am never upgrading again until i am sure all the bugs are out. this is a waste of my time and what's the use of having a cellphone if it only stays charged for two hours?
one of the apple forums said that iox is "expanvie" and gave us tips on how to lengthen battery life. i was already doing all that stuff. so it seemed to me that apple was just taking the stand that ios is just more "expansive." this is lipservice hogwash. if that is the case, then we need to get new phones with batteries strong enough to accommodate running these power apps and updates.
my iphone makes a **** good coaster though. right now i am just ready to start sending smoke signals!

N81 does not retain the correct date...

My N81 got a very strange problem: it does not retain the correct date....
Usually it's wrong by two days ago....!
The S.O. Ver. is: 10.0.32
Thanks you and sorry for my english...! :-)

hi there, have you checked that there is a firmware update for your model? v10 sounds like the original firmware for the N81. i would suggest checking on your PC via Nokia Software Updater for any firmware updates. the latest firmware version for the N81, unbranded or not, is v21.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

HT4623 how can i update my iphone 4 that does not have the update option in the settings?

How can i update my iphone 4 that does not have the update option in the settings?

From the article you linked, scroll down to the section "Update your device using iTunes"

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

HT4906 I updated to IPhoto 11 but iCloud still does not recognize the update

I updated to Iphoto 11 but iCloud still does not recognize the update? Why?

What version of iPhoto do you have? 9.2.2 or newer is needed
What verison of IOS on your mobile devices?
LN

HT2204 Why is the app store not synced with icloud? Have so many logins and cannot login to one or the other sometimes. Wanted the latest updates to an app my friends already got and could not get the update all day long.

Why is the app store not synced with icloud? Have so many logins and cannot login to one or the other sometimes. Wanted the latest updates to an app my friends already got and could not get the update all day long.

In after 10 hours. Magic...

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

My new iPod nano does not get the battery life that is advertised

Help me my iPod nano does not get the battery life that is advertised

Which battery life are you referring to? Apple's website states the iPod Nano 6th Gen will get "up to 24 hours of music playback when fully charged". There are going to be a lot of things that can change that. Are you using the stopwatch or the count down timer a lot? Are you using the FM radio a lot? Any accessories that you are using with the iPod? These will all have an effect on your battery life.

HT4972 my iphone 3gs does not have the update software button how do i update the software

my iphone 3gs does not have the update software button how do i update it?

It isn't in the device pane. If you have selected your iPhone, then on the right side you should see information on what is contained on your iPhone. There should be a number of tabs towards the top, Summary, Info, Music, Photos, etc. Not necessarily in that order. On the Info tab is where you should find the tab. It should look like this.

My iphone 4 does not get the sms

my iphone 4 does not get the sms , help me please , im chilean

the company is CLARO
I have already called several times for help but give me solutions that do not work, I andrestored and all, do not do: /

HT4623 My phone does not have the Update SOftware option between About & Usage in General under Settings. How do I update it then?

My phone does not have the Update SOftware option between About & Usage in General under Settings. How do I update it then?

This is called Support a Community of users who are helping each other. Save the sarcasm or smart remarks. I read must of your answers to other people as well and you seam to have a pattern like a bully. Sorry that our questions are above you. If you have no helping comments save them for yourself. READ what support means, you should try it once in awhile.

Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

Where and how do I fix this?
We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
- Install and launch your app
- Go to Settings > iCloud > Storage & Backup > Manage Storage
- If necessary, tap "Show all apps"
- Check your app's storage
The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
More info here:
http://forums.adobe.com/message/4730637#4730637

RFC does not get the updated data

Similar Messages

Maybe you are looking for