RFC dynamic Language Selection

Hi
Would it be possible to change language during runtime for applications using adaptative RFC in Webdynpro?
I suppose that runtime language for RFC dictionary (labels, messages, etc) is based on JCO language selection.
Would it be possible to change this default language during rutime, using Browser settings, or user selection?
Thanks.

Hi Ronaldo,
as far as I know you have two options when defining the JCO's within the WebDynpro Administrator tool:
Either you may set there a fixed language, or you set the
language to <blank>. Then the language setting of the browser is used. For the IE go to Tools-Menu->Internet Options->Languages and move the desired language to the top of the list.
Quit all instances of the IE and then restart it so that
the changes take effect.
However, changing the language at runtime is not possible as far as I know.
Regards Thomas

Similar Messages

  • FM to call RFC dynamically

    Experts,
    I have a set of RFC's which has to be called dynamically. All RFCs have different set of input parameters. Is there any standard FM with which i can call RFCs with variant? similar to what we do for report using submit <progname> with selection-set <Variant>.

    Hi
    There is way
    One Question
    does the Input Parameters differ in the FM...
    Please do one thing you can cal lthe RFC Dynamically using the Tables Parameters..
    Using the tables parameters , pass this using Dynamic internal table..
    Inside the FM read this..
    do not use the Importing Parameters here

  • Product Language Selection

    I had installed Oracle 9i release 2 onto my windows with different language selection. As stated, some of the components are installed with the selected language together with English version and when I invoked those components, it will be open with the selected language.
    The problem now is how can I choose the components to open in English instead of the selected language? Some of the developer can only read in English and not the selected language, therefore, it is quite a big problem! Please enlighten on how to revoke the English language components instead of the selected locale language.
    Thanks!
    Will

    Hi Nikhil,
    Thanks for your reply.
    Attributes to be defined for Org structure in ROS client -- Acc System for vendor, Local Currency, Acc Assgnmnt Cat, User role and system alias.
       I am trying to assign entries for Acc System for Vendor but I am not getting any value for this field. Same I am not able to assign the values in system Alias. Which roles have to be assigned for ROS client?
    I have mentioned value SBM_PRESCREENING for Attribute Catalog ID in SRM Client.
    Settings for u201CDefine System Landscapeu201D in SRM Client.
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    Description - SP1CLNT500
    RFC Destination - SP1CLNT500
    Sys. Type - EBP_SUS (Is it correct?)
    Local u2013 X
    Logical System - SP1CLNT500
    Settings for u201CDefine System Landscapeu201D in ROS Client.
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    Description - SP1CLNT500
    RFC Destination - SP1CLNT500 (Logical System for SRM Client)
    Sys. Type - EBP_SUS
    Local u2013 X
    Logical System - SP1CLNT500 (Logical System for SRM Client)
    1.     Any other entries required in ROS Client for Define System Landscape?
    2.     Why I am not getting any values for Attribute Acc System for vendor, System alias in PPOMA_BBP for ROS client? Whereas I am getting logical system values in Define System Landscape?
    3.     I have defined Sys. Type - EBP_SUS for Define System Landscape in SRM Client but we are not using SUS. Is it mandatory to define EBP_SUS or I have to define another Sys. Type. Please suggest me.
    4.     Which logical system has to be assigned for Define External Web Services for SRM Client and ROS Client? For SRM Client which logical system has to assign and for ROS Client which logical system has to assign for Define External Web Services?
    5.     I had defined Bus.Type of a WebService - Supplier Directory for Define External Web Services. Is it correct?
    Abhijeet

  • Why Photoshop CS6 does not include language selection ? dont want it on win8 language, I want in eng

    Right now I am installing the programs on my new 64 bits computer , which runs windows 8 in a language which is not english.
    At the very beginning of the setup I noticed that it detected the language of sist. op.  and that it would install cs6 in such language. 
    I am very, very ,very upset with this and I will tell you the reason :   the best in terms of  literature , pdfs books , tutorials , support forums ,etc is written in ENGLISH !  
    If I install cs6  I will have all menus , tools and resources in other language and it will be very cumbersome to work with it.
    Perhaps with the best of the intention to make people feel comfortable with their own language you have made it this way.
    But there are several other guys like me that want it IN ENGLISH.
    As a long time user of photoshop  I never worked in other language than english and I will never do it.
    It looks like it is a new trend to detect the op sistem  language , I have had the same problem with Nero Platinum 12 , and others.
    Is there a way to install Cs6  in english ?
    I have no idea whether adobe developers team read this forum but I will give my suggestion : don´t leave the setup to choose the language , this is dictartoship , be democratic and bring back the language selection menu.
    thanks

    The setup choice only defines the language for the EULA.
    You download the version for whichever language you want the app to be in.

  • Can't get past language selection with Leopard Install disk

    My 1 year old Intel Mac Mini, which had been running 10.5.4 without problems suddenly froze up. The mouse was still active but I couldn't click anything. I turned the system off with the power button. When I restarted it got as far as the login screen, but clicking the user didn't do anything. I was able to log in using safe mode (hold down shift when starting). I ran the disc utility, repaired permissions and verified the disc. Seemed OK, but still the same behavior (freeze at login screen) when I try to boot normally.
    I tried booting from the Leopard install disk. When it reached the language selection page there were some strange-looking horizontal lines in the display. Clicking the "proceed" button caused a copy of the button's graphic to appear at the top of the page and nothing else happened. Very puzzling, since I had upgraded OS X using that same disc.
    I have a Superduper backup from a couple of weeks ago. It won't boot up normally either. Any ideas? Unfortunately, I'm 2 weeks out of warranty!
    Thanks,
    jwstex

    I would probably start looking at the ram to see if it's worked loose or a board has gone bad (rare, but it happens).
    Make sure no external drives or other unnecessary connections.
    If the ram doesn't fix the problem, then you could also Zap the PRAM by holding down the Command + Option + P + R keys during boot up. Hold down the keys until the Mac goes through 3 startup chimes, then just release the keys and continue to boot normally. Check your clock settings if it boots.
    http://support.apple.com/kb/HT1379

  • My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

    My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
    Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
    If you still want to restore your computer to factory level...
    Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
    To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide  PDF

  • Dynamic bandwidth selection for PPPoE over Ethernet/VLAN

    Hello all, hope you are doing great.
    I'm planning to deploy PPPoE Server (Cisco Router 7609) for a ISP. This ISP will provide Internet connection for customer over Ethernet.
    I have to provide a solution to assign bandwidth to each customer by RADIUS and I find some clues that Dynamic Bandwidth Selection (DBS) should be the answer. Unfortunately, DBS only support PPPoA or PPPoE over ATM.
    If you have any experience with equivalent function, please help me. Thank you very much.
    Regards,
    Hiep Nguyen.

    Hiep,
    I think I have figured this out.  Here is the test config on my PPPoE server:
    int lo1
      ip address 172.25.25.25 255.255.255.255
    ip radius source-interface Loopback1
    aaa new-model
    radius-server host 172.16.1.55 auth-port 1812 acct-port 1813 key cisco$$$
    aaa group server radius RADIUS-ACT
     server 172.16.1.55 auth-port 1812 acct-port 1813  
    aaa authentication login default group RADIUS-ACT local
    aaa authorization exec default group RADIUS-ACT local
    aaa accounting exec default start-stop group RADIUS-ACT
    aaa accounting delay-start
    aaa authentication ppp default if-needed group RADIUS-ACT local
    aaa authorization network default group RADIUS-ACT local
    aaa accounting network default start-stop group RADIUS-ACT
    aaa accounting update periodic 5
    bba-group pppoe global
     virtual-template 1
    interface fa0/1
     pppoe enable group global
     ip address 172.30.0.1 255.255.0.0
     no shut
    interface Virtual-Template1
     mtu 1492
     ip unnumbered FastEthernet0/1
     peer default ip address pool GLOBALPOOL
     ppp authentication chap
    ip local pool GLOBALPOOL 172.30.0.2 172.30.127.255
    policy-map POLICE-128K
     class class-default
        police 128000
    policy-map POLICE-512K
     class class-default
        police 512000
    Here are the attributes on the radius server, for a group the PPPoE customer belonged to:
    Service-Type = Framed
    Framed-Protocol = PPP
    cisco-avpair="ip:sub-policy-In=POLICE-128K"
    cisco-avpair+="ip:sub-policy-Out=POLICE-512K"
    Here is the show policy-map on the virtual-access interface the client connected on:
    sho policy-map int virtual-a 3
     Virtual-Access3
      Service-policy input: POLICE-128K
        Class-map: class-default (match-any)
          1000 packets, 1402000 bytes
          5 minute offered rate 0 bps, drop rate 0 bps
          Match: any
          police:
              cir 128000 bps, bc 4000 bytes
            conformed 799 packets, 1120198 bytes; actions:
              transmit
            exceeded 201 packets, 281802 bytes; actions:
              drop
            conformed 0 bps, exceed 0 bps
      Service-policy output: POLICE-512K
        Class-map: class-default (match-any)
          911 packets, 1137746 bytes
          5 minute offered rate 0 bps, drop rate 0 bps
          Match: any
          police:
              cir 512000 bps, bc 16000 bytes
            conformed 799 packets, 1136178 bytes; actions:
              transmit
            exceeded 0 packets, 0 bytes; actions:
              drop
            conformed 0 bps, exceed 0 bps
    I was able to generate enough traffic with ping to meet the exceed action in and have it drop packets.

  • Dynamic Date selection inactive

    Hi,
    I am not able to give dynamic date selection in a variant. (D: Dynamic date calculation).The traffic light is displayed in red and there is no options such as
    current date etc. is there any need to do some settings to get these options.

    Hi,
    have a look at the below link..  ( they have mentioned the steps of customer exit variable fassigning for reporting agent)
    https://websmp110.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700003598422003E
    Regards,
    Siva.

  • Dynamic parameter selection from infoview not storing the sql password

    We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
    To be more specific.
    We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
    In the Central Management Console for the report object we have set as follows:
    Process - Database:
    Use original database logon information from the report - the sql username and pw etc
    Use same database logon as when report is run
    Process - Parameters
    In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
    As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
    We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
    This is 100% replicatable on our system.
    Any way that we can fix this?
    Will an update fix this issue? If so could you please advise which one?
    Thanks

    Hi,
    I am having the exact same problem. Any help?
    And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
    Regards
    Magnus

  • Dynamic RadioList selection

    I am building a radio list dynamically in TOOL code based upon certain
    criteria. I can get the list built no problem. But, I want to "select" a
    certain element based on an attribute I check on the object. So the element
    I want to appear selected may be element 2 or element 5 or element x. Has
    anyone ever done this? I can't seem to find anything in the Forte help that
    will allow me to do this?? Any help would be greatly appreciated.
    Thanks!!
    Doug Scurr
    HealthPartners
    8100 34th Avenue South
    Minneapolis, MN 55440-1309
    (612)883-7317
    [email protected] <[email protected]>

    Dale,
    I knew it would be something easy!! I obviously can't read very well!!
    Thanks for the help!!
    Doug Scurr
    HealthPartners
    8100 34th Avenue South
    Minneapolis, MN 55440-1309
    (612)883-7317
    [email protected] <[email protected]>
    -----Original Message-----
    From: Dale V. Georg [SMTP:[email protected]]
    Sent: Tuesday, April 27, 1999 2:34 PM
    To: [email protected]
    Cc: [email protected]
    Subject: Re: Dynamic RadioList selection
    > [email protected] wrote:
    >
    > I am building a radio list dynamically in TOOL code based upon
    certain
    > criteria. I can get the list built no problem. But, I want to
    "select" a
    > certain element based on an attribute I check on the object. So
    the element
    > I want to appear selected may be element 2 or element 5 or element
    x. Has
    > anyone ever done this? I can't seem to find anything in the Forte
    help that
    > will allow me to do this?? Any help would be greatly appreciated.
    > Thanks!!
    This should be as simple as setting the IndexValue of the radio list
    to
    the item that you want to have selected. For example:
    self.<theRadioList>.IndexValue = 2;
    to select the second item. Make sure your window is already open
    when
    you do this, though. ie, make sure self.Open() has already been
    called. The Open() method initializes a lot of the widget
    information
    on the window, and it may well set the index value of the radio list
    back to 1.
    Hope this helps,
    Dale
    ===================================
    Dale V. Georg
    Senior Systems Analyst
    Indus Consultancy Services
    [email protected]
    ===================================
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Language selection on support site partial impossible

    Oh god, who had this idea with the language selection on Support and Download site?
    Now i have purchased a wide screen-ThinkPad to reduce the horizontal scrolling but the new support site plays its own game.
    If i want to select "United States  English" i have no chance to see and select it:
    See Picture: http://abload.de/image.php?img=languageselectioneusdv.jpg (Mozilla Firefox)
    The horizontal scrollbar appears as well as the language list after i clicked on "Germany -- Deutsch" at the top of the page.
    The crazy "Feedback"-field in the lower right corner hides several languages to select.
    If i move the cursor to the scrollbar the language list disappears. - Great, well done!
    Why is it so difficult to use the visible part of the display? On the left hand there is more than the half screen size unused to display the language list!!
    Please tell the web-programmer to test on a single - display ThinkPad!!!!! in the future but not with two displays and enlarged desktop or 21:9 display.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

    Hei. This is not shown on the website, itself. It is like this only in the file manager /public_html/www directory on the server I use. There the downloaded files
    have the titles of the pages without these vocals. I´ve send a request to the webhotel company I use and the only answer I´ve got was not to use these vocals.
    This can´t be a solution. I had to change the title of the pages on iWeb, like from
    interiørdesign to interiordesign, f.ex. but this isn´t the way the word is written in norwegian. I am afraid I am not visible in search enginees (google)in norway (which) is the market I adress, because of this.
    I have lounged my site since april 2010 and still I don´t appear in a search even in the 20th page or something.

  • Netflix Language selection

        Ok,  I've looked at some of the posts,  all great posts.  But,  none answer my question.   I have the Apple TV And I do not have a Apple TV remote control.  I use the remote app on my iPad to control the Apple TV..   I'm a huge Anime fan and some are in Japanese with the option to watch in English Dub.   It defaults and starts up in Japanese and I don't know how to use my Remote App to select the English versions of the shows I want to watch.  Does the remote app have the ability to do language select?

    I just got off the phone with Netflix support. Specifically for Iron Man 2 and one of the Transformers movies it's a known issue. There is a temporary fix:
    1. Sign in to netflix.ca
    2. Change your account settings for video quality to anything except Best/HD.
    And that's it. I just tested it myself and it worked. He said you may have to wait an hour for the changes to come into effect, but I just logged out and then logged in to my Apple TV Netflix and it was done.
    He also mentioned this is a temporary workaround and they are working on it. Basically when they rent movies for use, they are given a package of different qualities and languages and they accidentally put the French HD in the English HD "slot". 
    Hope that helps!
    EDIT: This solution is only in direct response to X1Zero's problem. Sorry, OP.

  • To add Language selection option on Selection Screen

    Hi All,
    I have one Report Writer Report.
    In that Report I have created Basic Sets, Single sets and Multi Sets for G/L Account.
    I need to output this Report in two different language.
    1) Engish
    2) Chinese
    But I need to put the option on Selection Screen for Language Selection (whether English or Chinese).
    How to add this option on Selection Screen. Please Guide me soon.
    Regards,
    Rishi

    Hi Ashok,
    But when I hev created the sets, I have given the description of G/L Accounts in English. But when I will run the Report using Cinese as Logon language, how output will come in Chinese.
    1) Is there a need to maintain /L Accounts in Chinese language.
    2) or Shall i create the sets by giving description for G/L Accounts in Chinese If Yes then how to hadndle at run time..
    please guide I am new to Report writer.
    Regards,
    Rishi

  • Language selection in business partner master data?

    Hi, I was told that there is a field for language selection in the business partner master data. But I don't see any.
    Does anyone know where it is, if it exists at all?
    I'm using B1 2005A SP01 PL39.
    Thanks in advance for any hint.

    Hi,
    First you have to enable Multi Language Option in SAP Business One. To do so go to Administration > System Initialization > Company Details > Basic Initialization and tick the box for Multi Language Support.
    After that you can see the language option in your Business Partner.
    Regards,
    Kawish

  • Language selection in itunes

    I hope someone can help me!!!!!!! I'm trying to get started with itunes but my itunes store page is in french! I am not french and therefore can't read it. It means I can't set up my account. Does anyone know how I change the language selection- please help!!!!!!1

    Go to the bottom of the iTunes Music Store main page (in iTunes) and look for the My Store pulldown. If it's showing "France" and the French flag icon, pull down the menu and change it to your country.
    Regards.

Maybe you are looking for