RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2105
Hi,
I am getting the following error when I test RFC connection from XXX to YYY R/3 systems( Windows 4.6 C and kernel 4.6 D - 2297). but I am able to test successfully from YYY to XXX. I verified windows services file and every thing looks correct. RFC Connection XXX to YYY is still working if I use Load balancing(sapmsYYY). This problem started after we reboot the server. Also I am able to connect from every other server except this server.
M * ERROR timeout during allocate
A RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2105
ERROR timeout during allocate
LOCATION SAP-Gateway on host d01spxxx / sapgw00
DETAIL no connect of TP sapdp32 from host d01spyyy after 22 sec
COMPONENT SAP-Gateway
COUNTER 40492
MODULE gwr3cpic.c
LINE 1762
RETURN CODE 242
SUBRC 0
RELEASE 46D
TIME Wed Oct 03 10:57:28 2007
VERSION 2
Can anyone help me trouble shoot the issue.
Thanks
Kondala
Hi Kondala,
Pls refer note Note 581509 which should solve your problem.
Award Points if helpful
Regards
Umesh
Similar Messages
-
RFC ERROR timeout during allocate
Hi all,
We are trying to connect our ECC 6.0 system to ECC 5.0 system thru RFC we get the following error. Both the systems are available running
Timeout during connection setup. Please check partner availability
[abrfcio.c 8139]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2799
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =RQ3CLNT300
HOST =168.189.35.139
SERV =sapdp11
GWHOST =dcecqv1
GWSERV =sapgw02
[abrfcio.c 8139]
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed May 14 05:41:59 2008
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host dcecqv1 / sapgw02
M * ERROR timeout during allocate
M *
M * TIME Wed May 14 05:41:59 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 242
M * MODULE gwr3cpic.c
M * LINE 1872
M * DETAIL no connect of TP sapdp11 from host cpchrpq1.clorox.com after
M * 20 sec
M * COUNTER 1679
M *
M *****************************************************************************
M
A RFC 2318 CONVID 77332474
A * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 300)
A RFC> Destination: RQ3 (handle: 2, , {482AC1FF-A0EE-2871-E100-0000A8BD2A0B})
we have mentioned the system no, hostname..every thing correctly
Any help
Thanks
SenthilHi Senthil,
I had faced a similar issue working with my previous company. Upgrading the kernel had done the trick. I am not sure of the SAP note but please check Note, 827872 - Work process waits for registered RFC server
Regards,
Atul Lotlikar. -
RFC Error: Program not registered
Hi,
We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: TESTUSER (Client: 202)
Destination: SEEBURGER_RFC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SEEBURGER_RFC
HOST =%%RFCSERVER%%
PROG =BIS_ABC_202_DEV
GWHOST =ABC.XYZ.STU.com
GWSERV =sapgw15
I have checked RFC connection is fine. Also production systems connection are working fine.
Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
Thanks & Regards,
ManishHi Sunny,
Thank you for your suggestion, actually we have tried registration using rfcexec and it works fine.
BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
Thanks and Regards,
Nick -
RFC error when using BICA in Production
Hi,
After final transport to Prod, we are unable to import schema from queries with dimensions in Prod. Queries without dimensions are OK.
After investigations, we noticed that we have a RFC error :
TRACE BWP dev_rfc.trc
Trace file opened at 20110222 142806 CET SAP-REL 700,0,245 RFC-VER nU 3 1139952
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223
ABAP Programm: SAPMSSY1 (Transaction: )
Called function module: BAPI_MDPROVIDER_GET_LEVELS
User: BWPADM (Client: 101)
Destination: psbwpvip1_BWP_30 (handle: 1, 05465956, )
SERVER> RFC Server Session (handle: 1, 05465956, )
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: lss)
SERVER> Called function module: BAPI_MDPROVIDER_GET_LEVELS
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3349
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223
We tried to reroute our Prod server to BW Quality in file LSDAL.ini and it is working. It seems that we have a communication problem with our BW Prod.
Have you idea of what I should check to solve it ?
Thanks
MattHi Matt,
If you think you may be hitting a PAS maximum for # of hierarchies, you could enable PAS trace and reproduce the import and see if the trace file reports a problem with maximums.
In 7.5 you can enable this from the Administration section -> Set Application Defaults (system defaults?)
This will then automatically create files like:
a. DEFAULTGUEST436816399_both.txt
b. DEFAULTGUEST436816399_cmd.txt
c. DEFAULTGUEST436816399_time.txt
in your u2018/Homeu2019 directory (u2018...Files\SAP\SSM\ApplicationServer\homeu2019).
In this instance DEFAULT is the context name, GUEST the PAS username for the context, and the number a numeric sequence generated for uniqueness. You may need to shutdown the SSM Extended Listener service in order to look at the trace files.
The _both.text file has the best info.
Can you restrict the dimension in the query before you import it to see if it loads?
Thanks,
Bill -
Hi,
We unable to create EWA report from.we are having problem with RFC connection SDCC_OSS (Automatically generated Destination to SAP)
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: ***** (Client: 500)
Destination: SDCC_OSS (handle: 2, , {4E721E62-D7D0-007E-E100-80000A3C019A})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2323
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
HOST =/H/192.*.3.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
SERV =sapdp00
>>>> [2] SDCC_OSS : R/3 <ac: 3> K /H/192.*.3.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001 >>> CLOSE abrfcfun.c 679 ( )
-{4E721E62-D7D0-007E-E100-80000A3C019A}
==== Delta HO 2, 1 detaching (head)
==== Delta HO 0, 0 LOG DROPPEDUser: ***** (Client: 500)
It seems someone have changed the logon details, it should be like client 001 and with valid user name and password.
Search for the RFC details on SMP and SDN.
Regards,
Nick Loy -
Hi,
I've the error on bia accelerator monitor:
SP test: Error in BI accelerator (module TREX_EXT_GET_TREX_VERSION_INFO)
Error in the RFC communication: Error when opening an RFC connection (TREX_BIA)
sm59
trex_bia rfc test - OK
trace file rfc:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Programa de transação não registrado
ABAP Programm: SAPLRSDDTREX (Transaction: )
User: SISTEMA (Client: XXX)
Destination: TREX_BIA (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 88016765, {4BAC0DB7-08AB-20D6-E100-00000A78030D})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: CL_RSDDTREX_RSRV_CHECKS=======CP)
SERVER> Called function module: RSDDTREX_BIARFCPING_ON_APPL
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Programa de transação não registrado
DEST =TREX_BIA
HOST =%%RFCSERVER%%
PROG =Trex_B02_20090121184057
Can anyone help me?
Regards,
MiguelHi Miguel,
You can use the steps in the SAP note 1270808 to check the RFC or ICM connection to the BWA box.
It seems from the trace you mention that you get the error that a program is not registered:
From SAP note 63347 you can see that the 679 error happens if an RFC call is looking for a server program that is
supposed to be registered on the gateway.
There are two notes that contain details on how to register a server program on the gateway. I have mentioned them for your review:
63930 Gateway registration of RFC server program &
353597 Registration of a server program
I hope this helps,
Best Regards,
Des -
Hello everyone,
we are using TA co53 (control recipe monitor) which works fine most of the time. But now and then we get some error messages in the RFC Trace like this one.
**** Trace file opened at 20100712 121609 W. Europe Daylight Time, SAP-REL 700,0
======> CPIC-CALL: 'ThSAPCMRCV'
no data received
ABAP Programm: SAPLZ_PACKING_STATION (Transaction: ZSDPAKTI)
Called function module: HU_GET_RFC_DATA
User: AGHO (Client: 100)
Destination: Z_WAAGE_4 (handle: 3, 33324140, {7A9E8DDF-81FD-F16D-AAB7-00145EBB9A
Error RFCIO_ERROR_NO_DATA in abrfcpic.c : 3472
CPIC-CALL: 'ThSAPCMRCV'
no data received
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
I found some SAP Notes, but they are not usable for my release (NW 7.0, Patchlevel 221). Are there any suggestions what might be a solution for this problem? Or is it possible that this is caused by some network errors.
Thanks in advance
marcoHi,
>
> ABAP Programm: SAPLZ_PACKING_STATION (Transaction: ZSDPAKTI)
> Called function module: HU_GET_RFC_DATA
> User: AGHO (Client: 100)
> Destination: Z_WAAGE_4 (handle: 3, 33324140, {7A9E8DDF-81FD-F16D-AAB7-00145EBB9A
Your logs above giving the user name and client for which this is happening.
Thanks
Sunny -
RFC error when trying to add transport request in queue in STMS..
Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers -
RFC ERROR while running BI Process Chain
I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
ThanksThis looks like a BW problem. Do you get the same message when you submit it manually in SAP?
-
RFC error while publishing dialog transaction
Dear All,
I had made an internet service in a dialog pool.But while publishing it i am getting RFC errors.Can you tell me what are the prerequisites for designing an internet servise as i want my module pool page to be displayed through internet browser.
Pratighya JainHi Pratighya,
you got RFC-errors during the publishing of an internet service?
I assume you are talking about the integrated ITS.
Ok, that is what will happen if you publish an internet service:
the templates are copied to the the table containing the published ones
the MIME object are activated in order to be loadable by the icman - the
Web server part of the WebAS
The template caches on each application server of the system are invalidated.
For doing the last part we need RFC connections between the application servers,
since the order to refresh the cache is send using a function module via RFC. Is
the system configuration clean? Are all of the servers reachable by RFC?
You may check the state of the template caches using the transaction SITSPMON.
hope this helps
Tobias -
Hi All,
i have setup CHARM created a TR and task and assigned a correction to thes task, released the task and TR and while trying to import the the trequest to quality system (from solutionmanager) throwing an error"TMS Communication Error with [email protected]". opened the performance assisant of this error which displays "User SAPSYS has no RFC authorization for function
group TMSC "
rgds,
AnandDear Anand,
Please go to Tcode:SM59,select the [email protected] rfc under ABAP Connections and check for the connection test.
In the Log on tab(when you double click [email protected])check for the user which is mentioned there.
If you get same RFC error when you do the connection test,the proper RFC authorization should be given to the user mentione in the log on tab in the satellite system.
Revert for any clarifications,
Thanks and Regards,
Avinash. -
RFC error in idoc to file scenario in PI 7.0
Hi Experts,
I am getting a RFC error message like this below
:u201D RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_XI_SEND_MAIL in remote system (RfcClient[RFC_REJECTION_MAIL]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.u201D
Here Z_XI_SEND_MAIL is a customised function module which is calling some classes. This function module is responsible for sending emails to a group of people. This function module is working fine in acceptance server and development server but throwing exception in production. Thus the users are unable to receive emails. There has been no code changes in the function module. Idocs are being triggrred from sap r/3 system into XI, then being processed by a BPM, finally RFC (Z_XI_SEND_MAIL ) is being called to send email messages. SXMB_MONI is showing that the email message is being send to the RFC properly but communication channel is showing the above mentioned error.
Please suggest me what might be the reason of such errors?
Regards
AnupamHello,
Have you tested the production data in your acceptance system or development system for the interface?
Is it working fine??
It seems that the function module is generating exception, which could be due to data.
-Rahul -
Hi
I m Doing Web Dynpro Program For DMS Project There Is Some Problem Occuring In Default Function Module ARCHIVOBJECT_CREATE_FILE
And The Error Msg Is : Cannot Call RFC Program And No Return Possi
By
Srinivasan.RHi,
Please check if its Remote Enabled. The FM ARCHIVOBJECT_CREATE_FILE is a normal function module and not remote enabled.
As you have said, RFC error, I assume you are trying to call the FM from a different system specifying the DESTINATION
option.
Regards,
Sagar -
RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C
Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
VijayHello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay -
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.
Maybe you are looking for
-
I have just bought a brand new iMac (2.8GHz Duo, 2GB Ram) and I'm getting weird images missing on the Dock now and then. I don't fully understand. I've never seen this before with my MacBook pro or anything. When i hit the downloads folder, i saw the
-
I'm having problems logging out of any account that isn't the admin. All Apps and the finder quit but the desktop remains. the power button dialog window appears but sleep, restart, shut down & log out commands are ignored. Help?
-
Adobe Flash Player 10.2 installation flaw
When I downloaded AFP 10.2 everything was fine, that is until the installation. After I "installed" it, "The ActiveX control for Flash Player could not be registered" popped up. I did everything I saw on other forums, but to no avail. I am currently
-
Could not see Java tab on Apache Tomcat 5.5.20 Properties in CCM
Hi, After uninstalling and reinstalling BusinessObjects Edge 3.1, I can no longer see Java tab on Apache Tomcat 5.5.20 Properties in Central Configuration Manager (CCM). I can only see 2 tabs namely Properties and Dependency. Therefore, I could not s
-
Delta extaction from 'Z' R3 table to BW
Hello! I want to know if it´s possible to get data from an R/3 'Z' table to BW with delta extraction and the extraction option 'Table/View'. I have tried to do it but it doesn´t works. I can take the initial data but no delta data. In the RSA7 transa