RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

Hi Experts,
RSA1Source System (Context Menu) Check
I am getting the below error
<b>‘The BW IDoc type ZSBA011 is not the same as the source system  IDoc type ZSBD012 ‘              </b>                              
What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
Where should i check to correct the error
Thanks

Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322  Procedure after DB copy of BW source systems 
886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470      Activities after client copy in BW source systems
325525      Copying and renaming systems in a BW environment
184754      Procedure after BW database copy
184447      Building a BW-system landscape
184971      Notes on BW source system connections
140276      Error in source system assignment
524554      Storing destinations in the BW environment
538052  Maintenance of Myself destination in BW
Regards, Patrick Rieken
Message was edited by:
        Patrick Rieken - BI-Formance B.V.

Similar Messages

  • BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.

    Hi  Evrybody,
    I got an error when trying to initialize the delta load.
    Error Message :
    BI  IDOC type ZSBS042  is not the same as source system idoc type ZSBM023.
    Thanks for  the promt responses
    Regards,
    Zakir SM

    Hi ,
    I checked the IDOC with status 51.. I have this message
    " No status record was passed to ALE by the application ".
    what to do now...
    Rgds,
    Zakir

  • Enter a valid basic type - BW IDoc type RSSEND is not same as the SS IDOC

    Hi,
    I am connecting the ERP system to BW system, and am getting error:
    CHECK(context menu source system):
    @5C@     BW unknown in source system     RSAR     8     
    @5C@     The BW IDoc type RSSEND is not the same as the source system IDoc type     RSAR     371     
    RESTORE(context menu source system):
    Information: Enter a valid basic type
    Information help:
    Enter a valid basic type
        Message no. E0434
    Diagnosis
        An entry with the key /BD2CLNT100/LS//RSSEND//// is to be inserted in
        table
        EDP13.
        The value 'RSBEND' is not valid for field IDOCTYP.
    Procedure
        Check whether basic type RSBEND exists.
    help required

    Hi,
    Please find the below link may useful.
    http://wiki.ittoolbox.com/index.php/Re-Connect_R/3_and_BW
    Reg,
    Venkat

  • Issues in using the GLMAST01 idoc type

    Hi there,
               I am using the LSMW to upload the GL master records using the IDOC method. I am using the IDoc type as GLMAST01. I am passing the following data. I am not able to post the IDoc with following data. Please tell me, is there anything I am missing here or there is something else because of which I am getting the results?
             In E1SKA1M, I am passing the values for SAKNR, KTOPL, KTOKS, XBLIK, VBUND, BILKT.
             In E1SKATM, I am passing the values for SPRAS, TXT20 and  TXT50.
            In E1SKB1M, I am passing the values for BUKRS, WAERS, FSTAG.
            In some cases, I am creating the multiple segments for E1SKATM and E1SKB1M segments.
            This is kind of getting urgent and I could not find the answers for this in any other post on SDN. Please help.
    Thanks,
    Ganesh V Khumse

    Hi Vishnu,
    There is no solution for this, you cannot have GUI interactions(nor any statements that might invoke a implicit/explicit commit) in a V2 update. When you say this worked, did you have update debugging enabled, if so then it might have worked as the debugger session can access GUI...
    If the whole idea/need of this output is to download a file, use OPEN DATASET, TRANSFER and CLOSE DATASET.
    Even for the RSNAST00 execution, i am sure that in the actual business scenario(in production) this would be scheduled as a background job, where in again "GUI_DOWNLOAD" wouldn't work.
    Regards,
    Chen

  • Segment E1EDP36 not active in the DELFOR02 IDOC type.

    Hi All,
    I have been working with creating extensions for Idoc type DELFOR02  inn ECC 6.0. But for the basic idoc type DELFOR02 , the segment E1EDP36 is not active here.i.e., the idoc generated does not carry data for this particular segement.
    This segment depends on entries in a structure xisautoeklwes ( include LEINMF3S, line 130). The underlying table for this structure would be ISAUTOEKLWES(Last Deliveries for FLAB).
      Could anyone throw light on how this structure will be filled or how it has to be filled if I can make changes to the customer exit available there.
    Thanks,
    Savitha Patil

    Hi Gearge,
    To add custom segments, you should create an extension.
    the TCODE is we30.
    Refer this link:
    http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
    Regards,
    Ravi

  • Restructuring the basic IDoc type DELVRY03

    Hi experts,
    My rek  is to restructure the Basic Idoc type DELVRY03 for outbound delivery.
    I am using IDOC_OUTPUT_DELVRY.
    Is there any exit or badi for this.
    Thanks

    we31:
    Create your new segment.
    Save and remember release (edit-set release)
    we30:
    Create your new idoc type. Create like extension.
    In your linked idoc type fill your standard idoc type.
    Press create new sement button for add segments and put your Z segment created in we31 with min and max quantity.
    Save and release the idoc type
    Regards

  • IDoc type ZSDB003 could not be found.

    Hi,
    I have created source system for PCFILE. While checking I'm getting error message "<b>Basic type ZSDB003 does not exist</b>".
    Where can I make this entry? and where can i get list of valid idocs?
    I have search in the forums and found some threads but could not found relevant thread.
    Regards
    SSS

    Hi friend,
    Where you are getting this error ?
    If it is After creating the Source System....Delete it and Recreate.
    If it is after loading the Data....In the Monitor Screen....Details tab....Select the Idoc > Click on Manual Update ( After Right clicking ).
    In Transfer StructureIf u maintain IDoc as a Transfer Method ...make sure that you have selected ALE Inbox and Data Target option in the Processing Tab of the Info Package.
    Assign points if it is helpful.
    Regards,
    Ramkumar Ghattamaneni.

  • IDoc type ZSBC316 could not be found

    dear expert;
    when i connect bw and ecc ,an error occured,  it said   IDoc type ZSBC316 could not be found,could you give some advise?

    Hi,
    It is a customized idoc type, check if the IDoc type has been released. WE30, select EDIT and "Set Release ".
    Thanks
    Krithika

  • It is showing as error *Instance of object type PO could not be changed*

    HI Gurus,,
    i have requirement in PO Change IDOC , i have tested this IDOC .. but it is showing in Status record as error Document is does not exist
    and in Segmentheader for E1BPMEPOHEADER ..it is showing as error Instance of object type PO could not be changed
    SEGMENT NAME : E1BPMEPOHEADER
      PO_NUMBER
      COMP_CODE
      DOC_TYPE
      CREAT_DATE
      VENDOR
      PURCH_ORG
      PUR_GROUP ;;;
    we have entered related entries in it ...
    am uanble to find out where is porblem lies in it... plz help ASAP ...
    Thanks in advance..

    HI srinivas
    "It seems a data issue, Similar PO might be changed already and thus in SAP it is not allowing to change.
    So try changing the test data and post the IDOC again , it will change the PO . "
    yes we have entered the PO create and PO change .. where in PO change we have changed only QUANTITY and DATE .
    and showing this error" *It is showing as error Instance of object type PO could not be changed. "*
    Thanks in advance.

  • "the item you've requested is not currently available in the indian store"  error while trying to open App Store/iTunes on iPhone

    Hi All,
         Whenever i try to open the App Store/iTunes store on the iphone, i get the error  "the item you've requested is not currently available in the indian store".
    This happens whenever there is link for an App that i want to download and it happens for each and every app which is easily available on iTunes from PC. I dnt know what the problem is because of my friends who has an iPhone is able to access it, so its even more weird.The only difference is that she has an legally unlocked iPhone and i have the "other one". Please help...because it is very frustrating to everytime go on to the PC to download an App.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

    I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
    The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
    * You have used the proper case; requests ARE case-sensitive!
    * You have entered the URL correctly. (i.e. proper directory/filename)
    * You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
    * You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
    * The user/file still exists on this server.
    I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
    == URL of affected sites ==
    http://facebook.com; buscagoogle.com

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • The currency translation type 0MEANDAILY is not available in the system

    While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
    Any help?
    Thanks
    Arunava

    Dinesh,
       If I do a transfer Global setting from RSA1 on my CRM system  there are four to choose from
      1> Currency
      2> unit of measurement
      3> Fiscal year variant
      4> Factory calander
      Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
    Anurag,
      Can you please be a little more specific .. I am in the rsa1--> bc    Then what.. How do I search? I searched against the infoobjects and this is not available
    Thanks
    Aruava

  • Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

    Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll?  What do I need to do?

    Hi Hans - I'll do my best
    First I assume you are logged in as adminstrator on the computer you are using. You mention only seeing Mojo Pac in your Program Files, but there would be far more programs listed there. There are several ways you can find your Apple Application Support file folder.
    For Windows XP - How to Search for a File or Folder
    To search for a file or folder:
    Click Start, and then click Search.
    In the Search Companion dialog box, click All files and folders.
    Type part or all of the name of the file or folder, or type a word or phrase that is in the file.
    So in your case it would be Apple Application Support.
    If it doesn't show, you will need to make sure that you have enabled the search for hidden files or folders.
    To search for hidden or system files in Windows XP:
    Click Start, click Search, click All files and folders, and then click More advanced options.
    Click to select the Search system folders and Search hidden files and folders check boxes.
    Then search again for the Apple Application Support folder.
    I'm assuming that you will locate it. Once you have done so - click on it to open it in Windows Explorer.
    Then you should locate libxml2.dll - right click on it and select (left click) Copy
    On the left side of the window, under Apple Application Support folder, you should see Mobile Device Support - Right Click on it - Select (Left Click) on Paste.
    Start your iTunes programme.
    Good Luck and let me know how you get on.

  • I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

    Please help

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

    After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
    == This happened ==
    Every time Firefox opened
    == I installed a new version ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

    If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
    It is possible that some files got broken with the latest update.

Maybe you are looking for

  • WEP password from my iMac G4 flatscreen not support by Time Capsule

    Hello, I've just installed my new Time Capsule (dual band) today in combination with my new MacBook Pro. It all works fine, however I also have an 'old' iMac G4 17" flatscreen and here is the problem: although I use Mac OS X 10.4.11 I can't connect t

  • "Microsoft componenet......"Error message

    Though I have posted this b4 and I havent gotten any response; here is my sitiuation again, I have OS 9.2.2 and OS X 10.2.8 on my G4 which I have pagemaker 6.5 among other packages. The pagemaker 6.5 crashed and I saw this error message while trying

  • Reading content to insert into a database for file content searches

    I have a new challenge that has been brought to me. There is and existing application that has files being inserted into the database and the customer is having great difficulty in being able to have a search capability against those files. I was thi

  • Problem: after saving endtitle gets unreadable

    Hey there, I have a problem with the endtitle. It rolls from the right side to the left side. If I watch it in Premiere it looks very well, but after saving the movie as an mpeg-file the quality of the movie is great but the endtitle looks terrible..

  • FEP version SCCM 2012

    Hi, Please advise what version of FEP/SCEP is integrated in SCCM 2012. I don't find the official documentation but when we update definitions it is for 2010 although SCEP seems version 2012? Please advise. J. Jan Hoedt