(Rfc) error when called from bitztalk side

Hello,
I developed an RFC for payroll posting .RFC is working properly at R/3 end, But it is throwing an error "Control Framework: Fatal error - GUI cannot be reached" when it is called from Biztalk side.
Thanks in advance.
venu.

You could try to set the enviroment with something like:-
30 5 * * * su - oracle -c rman...........
HTH
PS. The .profile must be executable in a non-interactive mode as there is no terminal associated when called by CRON. Maybe the profile could check this using the stty command.

Similar Messages

Rman error when called from cron

i am using the command below submitted to crontab:
30 9 * * rman target "abc/pass@group1" rcvcat "xyz/pass@group2" cmdfile "/mydir/abc"
i get error rman-00569
lem-00031
lem-00033
when i just type the rman command without using crontab it runs...
i am at a loss please help
thanks

You could try to set the enviroment with something like:-
30 5 * * * su - oracle -c rman...........
HTH
PS. The .profile must be executable in a non-interactive mode as there is no terminal associated when called by CRON. Maybe the profile could check this using the stty command.

RFC Error during call from IBM WebSphere adapter to SAP R/3

We recently saw an issue arise on on one of our RFC interfaces. We dropped 15 messages onto the request queue of the BAPI adapter, 11 processed successfully, and 4 failed with the following statement:
[Thread: EAI.SAP_BAPIJmsThreadPool.thread5 (#1670071)] [Type: Error] [MsgID: 27064] [Mesg: Error: Function module Z_BAPI_ZPTRAC_UPDATE could not be found. Check the SAP system or the business object ASI.]
I replayed the 4 in question and they processed successfuly. I then dropped them on the request queue in our VAL environment and had 2 failures. I replayed the same 15 a second and third time and all 15 were successful in those cases.
Has anyone seen this before? We are configured to allow 1 concurrent connection and to log into the db server directly.
Thanks.

So we tested some things that are described in the SDN or by SAP with Connectors.
We tested JCO version 2.0.12, 2.1.18 and 3.0 in J2EE Projects in netweaver and in Eclipse (Standalone).
For version 2.0.12 there is a failure that this version is not compatible with the other things in netweaver.
This version is for standalone and integrated sytems.
For version 2.1.18 is only described as standalone and so failure happened in netweaver that other classes are coruppted or missed. The internal test in "content administrator" (Ping and Test) do not work and had the same error.
For version 3.0 (that displace the other two versions) there is many to do in settings and coding that we do not have tested yet because project is not that small to write it for JCO 3.0 only for testing. When we only displaced files in netweaver the server do not start any more.
So:
Is there a way to call R/3 from session bean and 1. create an JCO client or 2. add a client to the "standard" pool of netweaver to use it?
Any ideas? help? links?
Project have to be complete in september...
Our combi is SAP Netweaver 2004 SP21 on Windows XP SP2 / Server 2003 Standard SP1 with JVM 1.4.2_16... need of any more info?
thx

Xcelsius Error when Calling from 1 DB to another in BOE

I am trying to link two dashboards(parent and Child), and am getting the error "404 page cannot be displayed"
"documentDownload?iDocID=38732&sKind=Flash"
When I call the 2nd dashboard from 1st from BOE, the updated Link is:( this link gives me the error: "404 not found")
http://<BO Server>/Xcelsius/jsp/Flash_View/documentDownload?iDocID=38732&sKind=Flash
I manually modified the link and tried to open the SWF file it worked.
http://<BO Server>/Xcelsius/opendoc/documentDownload?iDocID=38732&sKind=Flash
Do I have to make any changes in the Server for this to work. Please Help.
PS: I used the opendoc link and it worked, but, when I migrate the Dashboard from Dev to QA/PROD. Opendoc link will point to the same server after the migration.

Try to use the following URL:
/OpenDocument/opendoc/openDocument.jsp?iDocID=38732&sKind=Flash
Just ommit the http://hostname part.
Regards,
Stratos
Edited by: Efstratios Karaivazoglou on Feb 10, 2011 7:42 PM

JCo error when calling from webmethods sap adapter to SAP BAPI

Hi,
I am getting an error "[SAP.102.9000] JCo error: (104) RFC_ERROR_SYSTEM_FAILURE - connection closed without message (CM_NO_DATA_RECEIVED)" when webmethods sap adapter is calling BAPI in SAP. The BAPI is working fine in SAP.
Can anyone suggest me a possible solution.
Thanks,
Sarath.

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
then Build{...} Dictionary (Output to Variable:requestHeaders)
then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
The RequestHeader is set to the requestHeaders variable though the web service call properties
then Log Variable:responseCode to the workflow history list
After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
Thank You for any insight

Hi,
According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
Please make sure you use the ‘Call HTTP Web Service’ correctly.
You can enter the URL into the brower to check whether it is correctly.
You need to
create the Request header requestHeaders
using a Dictionary:
Accept : application/json;odata=verbose
Content-Type : application/json;odata=verbose
To associate the
requestHeaders variable, select the Call action
property, set the RequestHeaders property to
requestHeaders.
Please refer to the following articles:
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
Calling the SharePoint 2013 Rest API from a SharePoint Designer
Workflow
In addtion, you need to make sure you install the workflow manager correctly.
More information:
Install and configure workflow for SharePoint Server 2013
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

ClassDefNotFound error when calling Java from C++

Hi all,
I have a problem with calling my java from C++ through JNI.
I have set my CLASSPATH environment varible that include path to every libary that I need. My source is as follows:
#include <jni.h>
#include <stdio.h>
int main()
     JNIEnv               *env;
     JavaVM               *jvm;
     JavaVMInitArgs     vm_args;
     jint               res;
     jclass               cls;
     jmethodID          mid;
IMPORTANT: specify vm_args version # if you use JDK 1.1.2 and beyond
     vm_args.version = JNI_VERSION_1_4;
     vm_args.ignoreUnrecognized = JNI_TRUE;
     JNI_GetDefaultJavaVMInitArgs(&vm_args);
     /* Create the Java VM */
     res = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
     if (res < 0) {
          printf("Can't create JVM\n");
          return 1;
     cls = (env)->FindClass ("dds/test/comm/listeners/NACKListenerFrame");
     if (cls == 0)     {
          printf("Can't find NACKListenerFrame Class\n");
          return 1;
mid = (env)->GetStaticMethodID(cls, "start", "()V");
     if (mid == 0)     {
          printf("Can't find NackListnerFrame.start \n");
          return 1;
     (env)->CallStaticVoidMethod((_jclass*)cls, (_jmethodID*)mid, NULL);
     jthrowable e = (env)->ExceptionOccurred();
     if (e)     {
          env->ExceptionDescribe();
          env->ExceptionClear();
     if ((jvm)->DestroyJavaVM() < 0)     {
          printf("Cannot destroy JVM./n");
     return 0;
I deliberately left out the codebelow because I want the JVM I created to load Classes from the system's CLASSPATH variable as I have set path to every classes that I need, in that CLASSPATH variable.
JavaVMOption     options[1];
options[0].optionString=
"-Djava.class.path=.;E:/DDSproject/DDSImplementation/classes";
vm_args.options = options;
vm_args.nOptions = 1;
But it seems like unless I specify CLASSPATH in my C++ source code the JVM could not find any classes.
I tried to put the "jvm.dll" path to the first one in the System's PATH variable. It does not work either...
Gurus Pls help!!!.. I don't know what to do... I don't wanna code my CLASSPATH in my c++ source code as above.
Thanks in advance,
chancellor

I was thinking JVM should the classpath when it is invoked. But obviously it is not and we need to assign the classpath ourselves when invoking from native side. Thanks for pointing that out. For other people's benefit the following is the code piece I for initializing JVM.
char* str1;
          char* str2;
          char* classpath;
          str1 = "-Djava.class.path=";
          str2 = std::getenv("CLASSPATH");
          classpath = (char*)malloc(strlen(str1) + strlen(str2) + 1);
          strcpy(classpath, str1);
          strcat(classpath, str2);
          if (str2 == NULL)     {
               printf("CLASSPATH environment variable is not defined.");
               exit(1);
          m_VmArgs.version = JNI_VERSION_1_4;
          m_options[0].optionString= classpath;
          m_VmArgs.options = m_options;
          m_VmArgs.nOptions = 1;
          m_VmArgs.ignoreUnrecognized = JNI_TRUE;
          JNI_GetDefaultJavaVMInitArgs(&m_VmArgs);
          /* Create the Java VM */
          m_Res = JNI_CreateJavaVM(&m_Jvm, (void**)&m_Env, &m_VmArgs);
          if (m_Res < 0) {
               printf("Can't create JVM\n");
               exit(1);
thanks,
chancellor

Error When Calling Up IGS (Error opening an RFC connection.)

hi experts,
i am getting error Error When Calling Up IGS (Error opening an RFC connection.)
when i excute in wad, i checked in forums regarding this issue ,it is suggested that in check in se38--> se38->GRAPHICS_IGS_ADMIN(execute)->then it opens one more window (IGS_RFC_DEST)execute(could not reach to IGS)
in RSRT if i execute IGS test button it is showing page cannot be displayed
can anybody give answer for this what to do
thanks
venu

Hi Venu,
I would suggest that you contact your basis team and ask them to check the entry for the IGS in SM59.

An error when calling DAQmx from TestStand

Hi,
I get very mystic error when calling DAQmx Create Channel (Digital input) and DAQmx Read (Digital Bool 1Line 1Point) vis. Difficulty is that it does not occur every time. It is random. Any ideas what might cause this error? I uninstalled Traditional DAQ drives because they are not in use but it does not help.
Please, see attachment.
BR,
Jick
Attachments:
daqerror.PNG ‏80 KB

Here is some additional information. See attachments.
I can not get that error using MAX or looping it only. There is something else outside which causes the error. It can not be Traditional DAQ because I uninstalled it. These vis are running in a loop during the test in the batchmodel.
BR,
Jick
Attachments:
daqerror2.PNG ‏33 KB
daqerror3.PNG ‏15 KB

JAX-WS client error when calling web method

My JAX-WS client is getting the following error when calling a web method:
Exception in thread "main" javax.xml.ws.WebServiceException:
No Content-type in the header!
I'm using Eclipse as my development environment. I use the CXF facet to generate a WSDL from Java code. I then use the New -> Web Service Client to generate client side code from the WSDL.
The following fully describes my environment:
Windows XP
JDK 1.6.0_22
Java EE 6
Eclipse Helios
Apache CXF 2.3.0 (runtime)
Tomcat 6.0
I have found several post on the net that describe this problem and a solution for JBoss, but I have been unable to find anything that addresses this error on Tomcat.
I can provide source code if needed. The app is a simple Hello World web service. I'm using it to try and get familiar with developing web services with all the components listed above.
Thanks

Hi Anders,
The resolution of the crossdomain problem is not to store an cross-domain-policy file at the [SAP] webservice side; but instead it needs to be done at the (every...) webservice client. In case the client is an IIS based webapplication (and thus the ultimate end-users are accessing it via their browser), this is not such an issue. It there is sufficient to put an crossdomain.xml policy file in the IIS main virtual root of your 'client' .net webapplication (c:\inetpub\wwwroot). It also can be required or at least helpful to put a clientaccesspolicy.xml file; both at the main virtual root and in the virtual root of the specific webapplication
In case of SharePoint application, the crossdomain.xml file must be stored in the WSS virtual root of that site; c:\inetpub\wwwroot\wss\virtualdirectories\<your SharePoint webapp>
Best regards, William.

IGS error (: Error When Calling Up IGS (ListenerRfc: unknown error))

Hi,
We have recently upgraded to NW04S.
Most of our BW reports( SAP delivered or custom, web template or not ) work fine with the IGS, while some reports don't, We receive a message from the Enterprise Portal ( Error When Calling Up IGS (ListenerRfc: unknown error)). No other details are available
We have checked and found out the related web templates are actually activates properly. From the same business content, we find some repports work and some don't, all however use web template.
Has anybody expoerienced the same? Please help.
   Thanks
Arunava

Hi AHP,
   1> BW_IGS_ADMIN when executed showed me some charts with some statictics and status etc. However as mentioned the other report BW_IGS_CHART_TEST just shows me a blank screen.
    2> SM59 connection test for the IGS RFC IGS_RFC_DEST is successful
    3> Ping on the Gateway Host( for the RFS dest) works fine as well.
    4> Also as I mentioned earlier, some of the reports using web teamplate works fine where some are not.
    5> when I do the RFC trace ( since I get an "Error When Calling Up IGS (ListenerRfc: unknown error) ) via ST01 for the query , in the BI sysatem, I get an error 'Prog:CL_IGS_CHART==================CPRow:'.
   Please let me know how do I proceed further.
Thanks
Arunava

Error when calling up IGS(listenerrfc: unknown error)

Hello,
We have integrated IGS 640.2 running on os windows 2003 64 bit(BW 3.5) .When i call the IGS chart from the EP portal i am getting the following error messge
Error when calling up IGS(listenerrfc: unknown error)
When i run the report GRAPHICS_IGS_ADMIN i am getting a blank screen.
This is in the case of production server.
I am getting the graph when i run report GRAPHICS_IGS_ADMIN in my BW quality server ( with same version IGS 640.2 os windows 2003 32 bit).
I have followed the below stpes for re-constructionin BW prod:
Followed the Snote 458731
1. Checked the Rfc destination 'GFW_ITS_RFC_DEST' amd 'IGS_RFC_DEST'
2. I can see the monitoring page when i run http://IGSHOST:LISTENERHTTPPORT
3. Program id and gateway is properly maintained
4. It is not generating any dumps when i set the dump status to "dump_on"
but in BW quality - dump file is getting generated
I can't switch on trace because it requires resatrt of teh server which is not possible in production.
I can see service called SAP IGS in BW qualitybut it is missing BW production.
Apart from that evrything looks similar in both quality and production server.
Can anyone advice me on how to fix this issue.
Appreciate your response.
Thanks in advance.
Vadi

Check the following Note : 454042
In rz20 you can find the IGS as the Internet Graphics Server in the monitor set SAP CCMS Monitors for Optional Components.
When you double-click on this entry a hierarchy with performance values should be displayed. If no hierarchy is displayed, even though the IGS is running, call transaction se38 and execute the program graphics_igs_admin. Choose Environment ® Switch on CCMS to activate the IGS display in rz20.

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

(Rfc) error when called from bitztalk side

Similar Messages

Maybe you are looking for