RFC Error when trying to approve an system in that ransport domain

Hello gurus
We are running SAP on WIN2K3 ,MAxdb ERP6 and we are facing a prooblem when configuring that transport system
We are setting up a 2 tier system .We have created the domain controller VGB(devhost)  but now the problem comes up when we try to approve BGH(prdhost) into the transport domain.It comes up with the following error in TMS alert viewer:
RFC communications error with system/destination
TMSADM at VGB.DOMAIN_VGB
File
devhost\sapmnt\trans\bin\TPPARAM could not be opened for reading (No such file or directory)-------i can connect from prdhost at  os level to the shared directory in devhost can read and write to usr\sap\trans
TMS_CI_CHANGE_CONFIGURATION 
TMS_PS_READ_PROFILE_FROM_DISK -
READ_PROFILE_FAILED 
We have done the following as we need to have a single transport directory on VBH
1.shared usr/sap/tarns on VBH (
2.gave access BGH  to VGB  host read/write access to usr/sap/trans
3.created a profie dir_trans
devhost\usr\sap\trans  on BGH(prdhost)
so is there  some where am getting it wrong? Any ideas are welcome

on  the prdhost the following errors came up:
Profile               Cannot read tp profile                   
Version               TMS profile management is not active 
DB Connect            Link to database failed                    
Offline Call              error in transportprofil (param missin..
on devhost( domain controller)  no errors

Similar Messages

  • HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

    I dunno, that doesn't make any sense to me.
    I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes.  There are only 3 that run in 32 bit only.  They are all 3rd party, and none of the prefpanes are non Intel.  Like I said, I have never owned a PPC machine.  Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well.  The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
    As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box.  All using the same hardware. but one at a time.  I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to.  (Which I don't)  I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact.  How could ML system preferences be trying to launch prefpanes from a totally different machine?

  • Runtime error when trying to use Thinkvantage system updater

    I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
    "Runtime error!
    Program:C:\Program Files\Lenovo\System Update\tvsu.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Can somebody please help me to get the Thinkvantage system updater working properly?
    Thanks-George
    This issue has since been resolved.Thanks-G

    I'm getting the same error.   I tried reinstalling system updater but it didn't help.

  • RFC error when trying to add transport request in queue in STMS..

    Hi,
    When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
    But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
    What may be the issue  ? I really need some light on this..
    Regards,
    Rajesh.

    Hi Rajesh,
    At times when u try to add the TR to a queue there would be 2 reasons.
    1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
    2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
    A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
    Hope it helps.
    Br,
    Sri
    Award points for helpful answers

  • Error when trying to remove logical systems using SALE

    Hello,
    We are trying to remove obsolete entries from the logical system name table using transaction SALE. When doing this, for some entries, I am getting a message:
    The logical system GB1MATDEV is still used in distribution model SUBSYSTEMS (client 010).
    Confirm that the logical system GB1MATDEV is really no longer used. Delete it first from distribution model SUBSYSTEMS (client 010), then delete it here.
    So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
    Action cannot be carried out on the nodes selected.
    It seems that I am stuck. Any ideas on how to resolve this?
    Regards,
    Michael Dube

    Dear Michael
    "So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
    Action cannot be carried out on the nodes selected."
    You need to delete the lowest possible node first, if you select the top node you get this type of error.
    You need to expand the node and then delete the smallest part of the node first and work your way up until you can delete the node itself.
    <removed_by_moderator>
    Kind regards
    Tom

  • Keychain error when trying to open MobileMe system panel

    I've had a lot of problems trying to get my iMac set up with MobileMe. My MacBook and iPod Touch are set up and working fine, but my iMac won't connect up (and never has). Following some advice on a forum here I did something in Keychain Assistant (can't remember what though!) and now I just get an error message when I try to open the system panel. -2147415734
    I really don't want to have to do a clean install.
    Any solutions?

    I just had the same error and found your posting with no reply, so I looked through the Apple Support pages and found the help I needed: http://support.apple.com/kb/HT1060. I worked my way down, with no luck, until the next to the last item, "Delete the MobileMe keychain entry." That worked for me, so I didn't need to completely reset my keychain.
    Hope this helps

  • Error when trying to approve a mitigation control in CUP

    Hi,
    I have created a Mitigation Control in RAR and set-up the necessary workflow. The request ends up in CUP and the approver is able to see the request when he/she logs in, however the approver cannot approve or reject the request.
    The following error messages appear:
    - Approve: Error processing your request, Request no: 2 in stage : MITIGATION
    - Reject: Error rejecting request no: 2
    I have check the workflow many times now and I have also checked the mitigation URL's.
    Any idea what the problem can be?
    Thanks.

    Thank you for your response. No the approver is not part of the DL. I just added the approver to the workflow (CAD).
    Please find log details below:
    2010-03-18 16:09:32,729 [SAPEngine_Application_Thread[impl:3]_8] ERROR Service call exception; nested exception is:
         com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://vgrdci.sap.client.co.za:51900/VirsaCCWFExitService5_2Service/Config1?style=document"
    java.rmi.RemoteException: Service call exception; nested exception is:
         com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://vgrdci.sap.client.co.za:51900/VirsaCCWFExitService5_2Service/Config1?style=document"
         at com.virsa.ae.request.ws.cc.Config1BindingStub.execWFExitService(Config1BindingStub.java:87)
         at com.virsa.ae.request.ws.cc.Config1BindingStub.execWFExitService(Config1BindingStub.java:96)
         at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callCCExitService(RequestExitServiceHelper.java:263)
         at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callExitServiceForApprovedRequest(RequestExitServiceHelper.java:51)
         at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:5335)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:5174)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:4967)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:928)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:103)
         at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:425)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://vgrdci.sap.client.co.za:51900/VirsaCCWFExitService5_2Service/Config1?style=document"
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:998)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1449)
         at com.virsa.ae.request.ws.cc.Config1BindingStub.execWFExitService(Config1BindingStub.java:80)
         ... 33 more

  • Error when trying to compound source system

    I am receiving the error message R7 405 "Inconsistent Compound with char x and Ref char x" when I try to compound 0SOURSYSTEM to some of my infoobjects. 
    Has anyone seen this issue and been able to resolve it?
    A simple scenario would be to try to compound source system with 0Division.  Division has a reference char of 0DIV_HEAD.   Both are collected in RSD1 via the free selection of infoobjects.   0Division is changed and both objects are selected and activated.  The resulting error R7 405 is then displayed by the system.    We are receiving this for multiple objects.   I was able to convert Material with all its dependencies.

    I get it.
    This is what I did. I added source system as compounding IO to reference object, say ZDIVISION in IO editor. I saved it (it was giving me activation error). I then opened the referencing char, say ZDIV_HEAD in IO editor and added source system compounding. It was again giving me activation error, so I just saved it.
    I went to RSD1, collected these two IOs and activated. I got an error because the reference IO was in a comm structure which had no source system. I deleted that infosource, and activated both the IOs again in RSD1. It activated just fine. Both IOs are active now.
    By the way, the IO editor does allow you to add compounding for a referencing IO (it gives activation error though).
    Not sure if this helps.

  • Error when trying to create a new object that begins with Z

    Hi forum,
    When I try to create a new BW object that begins with Z (infofuente, infoarea, component application), I skip the following error.
    Namespace''is not a valid namespace BI
    Message no. R7017
    Diagnosis
    Namespace''must be entered in both the BI RSNSPACE table and the basic table TRSNSPACE or the view V_TRNSPACE. You also have to enter the relevant generation namespace '& V2' in TRNSPACE table. This value is taken from table RSNSPACE.
    Both namespaces must be set to 'Changeable' - providing they are not empty.
    Response System
    You can not edit or create an object in this namespace.
    Procedure
    Use a different name.
    Or contacct your system administrator. He / she can switch to the namespaces' Changeable 'using SE06 transaction, or - if they do not already exist - enter them in the table above named using sm30 transaction.
    If the namespace '& V1' is empty, then the problem is with the generation namespace '/ BIC /'.
    Procedure for System Administration
    I've been following steps said to me, and yet I still persisted error. I am probably missing something ... that may be?
    A greeting,

    Hi,
    Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
    It is possible that you dont have development authorization.
    Also the issue could be that the system is not configured to create the objects begining with Z.
    Check this with basis as well.
    Thanks
    Ajeet

  • Error when trying to create/edit users in the tree domain from exchange

    The scenario is we have one forest and two different domains in tree domain architecture(Forest : expo.com)(tree : dept.com) with windows 2012R2
    We have deployed exchange 2013 in another server with windows 2012R2 based on expo.com.
    When I try to create new user for dept.com I am getting the below error. but the same is working for expo.com
    error
    Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521E1, problem 4003 (INSUFF_ACCESS_RIGHTS), data

    When I try to create mailbox for the existing user in the dept.com i am getting the below error. but the same is working for expo.com
    error
    Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BC1, problem
    4003 (INSUFF_ACCESS_RIGHTS), data 0 
    Please help on providing me the details of configuration to do for solving the issue.

    Hi araddy,
    Thank you for your question.
    For user account in dept.com, we should create it on DC in dept.com domain.
    By my understanding, we have install Exchange 2013 in expo.com domain, there are no Exchange that install in dept.com domain. If I misunderstanding, please be free to let me know.
    If that, If that, we should create link mailbox for user in dept.com domain. In the Exchange forest, for each user in the accounts forest that will have a mailbox in the Exchange
    forest, create a mailbox that is associated with an external account by the following link:
    https://technet.microsoft.com/en-us/library/jj673532(v=exchg.150).aspx
    The more details could be referred by the following link:
    https://technet.microsoft.com/en-us/library/aa998031%28v=exchg.150%29.aspx
    If there are any questions regarding this issue, please be free to let me know.
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • 'System Error' when trying to save Form Manager Registry Settings

    Hi,
    trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
    > System Error
    >
    The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
    Has anyone had this error as well?
    The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
    SpyJMSException.
    Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
    Regards,
    Steve

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

  • I have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    i have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    The first error comes when i open my laptop:
    APSDeamon.exe -  System Error
    The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
    when I try to open Itunes, it says:
    iTunes.exe
    iTunes was no installed correclty, please re-install itunes
    Thanks!
    Annabel

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Keep getting VncViewer.class not found error when trying to use Windows 7

    Greetings,
    I have no issue accessing the OVM Manager 2.2 with OEL 5.4 x86_64 with the latest Java release from ULN. But when I use a Windows 7 client ( x86) with the Sun Java 6 Update 18 I get the following error when trying to access the Console of a VM Guest:
    Java Plug-in 1.6.0_18
    Using JRE version 1.6.0_18-b07 Java HotSpot(TM) Client VM
    User home directory = C:\Users\deverej
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    load: class VncViewer.class not found.
    java.lang.ClassNotFoundException: VncViewer.class
         at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed:http://141.144.112.202:8888/OVS/faces/app/VncViewer/class.class
         at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
         at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 7 more
    Exception: java.lang.ClassNotFoundException: VncViewer.class
    I am curious fi I should use only a specifc Java Engine with IE 7 or the latest Firefox browers.

    Same issue to with Windows XP SP3 x86 with Java Runtime Enviornment 1.5.0_15
    J2SE Enviornment 5.0 Update 15
    Java 6 Update 17

Maybe you are looking for