RFC error while activating the Form

hi all,
i am trying to activate a new form or even while generating the pdf tab.this generates the pdf but with a popup 'no message though'.
i get a success message of bytes transmitted ,code page 0000.
but doesnot get activated.
but when i execute it..
i get an error message as below.
system_error,
message id : fprunx
message no :001
message : ADS : error when opening and RFC communication(110101)
is it a compatibility error. aor what?
i use windows o7,LDC 8.0,adobe reader 9.1 with flash player 10
can anybody suggest me whats the error and hw to go about it???

Use reports FP_TEST_00 a FPDESTINATION_CHECK (with destination checked true) to find out when your ADS connection will work. Your basis colleagues will use the same reports for their test.
Learn that FP_* reports can be very useful for you in future, for testing or as a demo programs.
Here are some basis links for you (or your colleagues) to read aout ADS and stuff:
ADS Installation and configuration:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Troubleshooting for ADS configuration:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
Landscape with ADS:
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
ADS tests
http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
regards Otto

Similar Messages

Error while activating the form

when i was activating the form iam getting an error
INVALID HTTP Connection ADS.
please give me a solution.
Thanks&Regards
Siva

Hi
Please check your ADS Conection for your system by Executing Test Report "FP_TEST_00 "
Procedure
   1. Log on to your SAP Net Weaver AS ABAP.
   2. Call transaction SA38 and enter the name FP_TEST_00.
   3. Choose Execute (F8). A dialog box is displayed.
   4. Enter FP_TEST_00 in the field Form.
       This is displayed as the default form name.
   5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have               specified another name, the one you are using in your system.
   6. In the dialog box, choose Output in Print Preview.
   7. Enter an appropriate device type in the field Output Device.
   8. Choose Print Preview.
On successful execution of the report, you find the Print Preview of the PDF form
Regards
Ashwini

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

SOAP Framework error while activating interactive form in SFP

hi everyone,
I am new to adobe forms, I got an error while activating interactive form
SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
Thanks in advance.
- Aditya

Its an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
Raja

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error while determining the form function module

Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
Sophie

Viktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Run Time error while activating the cube 0pp_c03

Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
Rohit

Hi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa.

Travel Display Form: Error while determining the form function module

Hi,
In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
"Error while determining the form function module"
Can anyone have idea on this?
Regards,
Boobalan

Hi,
This error was due to Not supported platforms of ADS (Adobe Document services)
It was not supported on itanium64 bit processors.
Please check where the ADS is supported in service.sap.com/pam
You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
Please refer the ADS Config Doc for details.
Hope you also solve this problem.
Regards,
Boobalan

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

RFC error while activating the Form

Similar Messages

Maybe you are looking for