RFC error while adding an remote monitoring entry to CEN
Hi,
I am trying to add an remote system to CEN by RZ21 i.e.
in RZ21 -> Technical Infrastructure -> Configure Central system -> Create Remote Monitoring Entry
But while testing RFC connections before saving, it giving following erros :
SC4_RZ20_COLLECT_195119Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Are these errors of any concern?
or shall i go ahead and save the entries?
Please suggest.
Hi,
ssue has been fixed after following
SAP Note 1453112 - CCMS agent and kernel: patches 2010
1:) Here we first performed kernel upgrade then re register agents as per note.
2:) While for mentioned error during remote monitoring entry we checked in path
Tcode-> sm59-> TCP/IP connectiones -> then in RFC destination SAPCCM4X.<SID>.<instance no> and found destination information was not correct so we corrected as
SAPCCM4X.<monitoring system id>.<instance no> then
then perform remote monitoring entrory steps via RZ21 and issue got resoulved
Similar Messages
-
RFC Error While Invoking A Remote Function Module.
I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can <b>ping </b>or <b>test your JCO connections</b>. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to <b>Visual Admin -> Server -> Services -> Deploy ->
</b>
Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas. -
We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
iled unexpectedly.\r
: error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
dentials in the SSO database are more recent.\r
error MSB4018: \r
error MSB4018: at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
ring applicationName, String identifier, IPropertyBag properties)\r
error MSB4
018: at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
me, String propName, String propValue)\r
error MSB4018: at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
askExecutionHost.Execute()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
sult)
Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010Hi,
This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
2. If this does not works, have a look at this
link
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question -
Remote monitoring entry in SOLMAN
Hi ,
I am trying to create Remote monitoring entry in SOLMAN but after I create and save , it says entry is saved in secure area but dos not reflect in system topology.
It give me the following message after save :
ECD_RZ20_COLLECT_072949Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Please advise
thanks
Regards
AditiHi Aditi,
Is your issue solved ?If so please let me know.. i am also facing the same issue .
Thanks in advance..
Srini -
I am getting the following error while adding record into the table CM_RECIPE_ITEM :
<h4> Error </h4>
ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
Error Unable to process row of table CM_RECIPE_ITEM.
Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
Thanking You,
Yogesh
<h4> CM_RECIPE_ITEM Table </h4>
CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
<h4>Global temporary table</h4>
DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
ROW_ID ROWID
ON COMMIT PRESERVE ROWS
NOCACHE;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
BEGIN
INSERT INTO interim VALUES (:new.rowid);
END;
<h4>Trigger to update data on CM_RECIPE table </h4>
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
BEGIN
FOR ds IN (SELECT row_id FROM interim) LOOP
UPDATE CM_RECIPE
SET CR_RMC = (
SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = CR_BOM_CODE
AND rowid = ds.row_id
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (
SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id
) + CR_RMC;
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN =
(SELECT CIFG_DP_RATE
FROM CM_ITEM_FG
WHERE CIFG_CODE = CR_CIFG_CODE
AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
END LOOP;
END;
/The scripts of the tables CM_ITEM_FG, CM_RECIPE, CM_RECIPE_ITEM are as follows :
<h4>CM_ITEM_FG</h4>
ALTER TABLE COSTMAN.CM_ITEM_FG
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_ITEM_FG CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_ITEM_FG
CIFG_CODE VARCHAR2(13 BYTE) NOT NULL,
CIFG_CCG_ID NUMBER NOT NULL,
CIFG_NAME VARCHAR2(50 BYTE) NOT NULL,
CIFG_PACKING NUMBER NOT NULL,
CIFG_OVERHEAD NUMBER NOT NULL,
CIFG_OTHERS NUMBER NOT NULL,
CIFG_DP_RATE NUMBER NOT NULL,
CIFG_CR_BY VARCHAR2(32 BYTE),
CIFG_CR_ON DATE,
CIFG_UPD_BY VARCHAR2(32 BYTE),
CIFG_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_PK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE, CIFG_CCG_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_UK_001 ON COSTMAN.CM_ITEM_FG
(CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_ITEM_FG_T1"
BEFORE UPDATE ON "CM_ITEM_FG"
FOR EACH ROW
BEGIN
BEGIN
UPDATE CM_RECIPE
SET CR_TOTAL_COST = (CR_RMC + :NEW.CIFG_PACKING + :NEW.CIFG_OVERHEAD + :NEW.CIFG_OTHERS);
END;
BEGIN
UPDATE CM_RECIPE
SET CR_GROSS_MARGIN = (:NEW.CIFG_DP_RATE - CR_TOTAL_COST) / CR_TOTAL_COST;
END;
END;
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_PK_001
PRIMARY KEY
(CIFG_CODE, CIFG_CCG_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_ITEM_FG_UK_001
UNIQUE (CIFG_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
CONSTRAINT CM_ITEM_FG_FK_001
FOREIGN KEY (CIFG_CCG_ID)
REFERENCES COSTMAN.CM_COST_GROUP (CCG_ID));
<h4>CM_RECIPE</H4>
ALTER TABLE COSTMAN.CM_RECIPE
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE
CR_ID NUMBER NOT NULL,
CR_CCG_ID NUMBER,
CR_EFF_FROM DATE,
CR_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CR_BOM_CODE VARCHAR2(50 BYTE),
CR_QUANTITY NUMBER,
CR_RMC NUMBER,
CR_TOTAL_COST NUMBER,
CR_GROSS_MARGIN NUMBER,
CR_CR_BY VARCHAR2(32 BYTE),
CR_CR_ON DATE,
CR_UPD_BY VARCHAR2(32 BYTE),
CR_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_PK_001 ON COSTMAN.CM_RECIPE
(CR_CCG_ID, CR_ID, CR_CIFG_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_001 ON COSTMAN.CM_RECIPE
(CR_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_002 ON COSTMAN.CM_RECIPE
(CR_BOM_CODE)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_T1"
BEFORE INSERT ON "CM_RECIPE"
FOR EACH ROW
DECLARE
L_ID NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CR_ID IS NULL THEN
--SELECT CM_RECIPE_SEQ.NEXTVAL INTO L_ID FROM DUAL;
:NEW.CR_ID := CM_RECIPE_SEQ.NEXTVAL; --L_ID;
END IF;
:NEW.CR_CR_ON := SYSDATE;
:NEW.CR_CR_BY := nvl(v('APP_USER'),USER);
END IF;
IF UPDATING THEN
:NEW.CR_UPD_ON := SYSDATE;
:NEW.CR_UPD_BY := nvl(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE ADD (
CHECK ("CR_EFF_FROM" IS NOT NULL) DISABLE,
CHECK ("CR_CCG_ID" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_PK_001
PRIMARY KEY
(CR_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
CONSTRAINT CM_RECIPE_UK_002
UNIQUE (CR_BOM_CODE)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
<h4>CM_RECIPE_ITEM</H4>
ALTER TABLE COSTMAN.CM_RECIPE_ITEM
DROP PRIMARY KEY CASCADE;
DROP TABLE COSTMAN.CM_RECIPE_ITEM CASCADE CONSTRAINTS;
CREATE TABLE COSTMAN.CM_RECIPE_ITEM
CRI_ID NUMBER NOT NULL,
CRI_CR_ID NUMBER NOT NULL,
CRI_BOM_CODE VARCHAR2(50 BYTE) NOT NULL,
CRI_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_CIRM_CODE VARCHAR2(10 BYTE) NOT NULL,
CRI_SEQ NUMBER,
CRI_QTY NUMBER,
CRI_RM_COST NUMBER,
CRI_CR_BY VARCHAR2(32 BYTE),
CRI_CR_ON DATE,
CRI_UPD_BY VARCHAR2(32 BYTE),
CRI_UPD_ON DATE
TABLESPACE COST_MANAGER
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_ITEM_PK_001 ON COSTMAN.CM_RECIPE_ITEM
(CRI_ID)
LOGGING
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T2"
BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM"
FOR EACH ROW
BEGIN
IF :NEW.CRI_CR_ID IS NULL THEN
SELECT CR_ID INTO :NEW.CRI_CR_ID
FROM CM_RECIPE
WHERE CR_BOM_CODE = :NEW.CRI_BOM_CODE;
END IF;
END;
CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T1" BEFORE
INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
DECLARE
L_ID NUMBER;
SEQ NUMBER;
BEGIN
IF INSERTING THEN
IF :NEW.CRI_ID IS NULL THEN
SELECT CM_RECIPE_ITEM_SEQ.NEXTVAL
INTO :NEW.CRI_ID
FROM dual;
END IF;
:NEW.CRI_CR_ON := SYSDATE;
:NEW.CRI_CR_BY := NVL(v('APP_USER'),USER);
SELECT (NVL(MAX(CRI_SEQ),0)+1)
INTO SEQ
FROM CM_RECIPE_ITEM
WHERE CRI_BOM_CODE = :NEW.CRI_BOM_CODE;
:NEW.CRI_SEQ := SEQ;
END IF;
IF UPDATING THEN
:NEW.CRI_UPD_ON := SYSDATE;
:NEW.CRI_UPD_BY := NVL(v('APP_USER'),USER);
END IF;
END;
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CHECK ("CRI_RM_COST" IS NOT NULL) DISABLE,
CHECK ("CRI_QTY" IS NOT NULL) DISABLE,
CHECK ("CRI_SEQ" IS NOT NULL) DISABLE,
CONSTRAINT CM_RECIPE_ITEM_PK_001
PRIMARY KEY
(CRI_ID)
USING INDEX
TABLESPACE COST_MANAGER
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
CONSTRAINT CM_RECIPE_FK_002
FOREIGN KEY (CRI_CIRM_CODE)
REFERENCES COSTMAN.CM_ITEM_RM (CIRM_CODE),
CONSTRAINT CM_RECIPE_ITEM_FK_001
FOREIGN KEY (CRI_CR_ID)
REFERENCES COSTMAN.CM_RECIPE (CR_ID));
Yogesh -
Error while adding attribute to 0material
hello, experts
I've got some errors while adding Z-attribute to 0material as a attribute.
here's a part of the log.
Activate table /BI0/PMATERIAL
Table is not yet classified
/BI0/PMATERIAL: Structure change at field level (DB is adjusted)
Adjust table in DB >>>
sql:
ALTER TABLE "/BI0/PMATERIAL"
ADD ("/BIC/ZMRPTYPE" VARCHAR2 (000002)
DEFAULT ' ' NOT NULL )
ORA-01562: failed to extend rollback segment number
DDL time(___1): .2,144,462 milliseconds
The SQL statement was not executed
Table /BI0/PMATERIAL (Error adjusting the database)
Table /BI0/PMATERIAL was not activated
How could I solve this problem?
Please help.
thx.Hi,
You can also to Tcode:RSRV
Tests in Tran RSRV
->All elementary Test
>Master Data
>Compare Charat Values in SID-,P- andQ- Tables.
Drag that in right panel.
Open that > in right panel and Entry 0MATERIAL.Transfer
Then Execute->Yes in pop-up.
If any problem..click on repair.
Hope this helps....
Regards,
San! -
Solution Manager Create remote monitoring entry
Hello,
I need some help or clarification please. We just upgraded our Solution Manager to EHP1 spk25 and I'm trying to setup Solman to support central system monitoring. I'm on the last step to enter the moitored ABAP system in CEN through RZ21 Techincal >Configure Central System>Create remote monitoring entry.
I can enter my own System ID but can't enter the RFC destination ? These default to *_RZ20_Collect and *_RZ20_Analyze. I want to use the RFC's already in place through Charm since these are already setup and working correctly. Can someone tell me how to change this or why we have to use the defaults.
Thanks in advance
StephaniePlease disregard.
Thanks -
Error while adding A/P Credit Memo!
Error while adding A/P Credit Memo..........
'G/L Accounts' (OACT) (ODBC-2028) Message - 131-183
Please advice me .....
Thanks...Hi
Check this thread this may help you.
[Re: AP Invoice - No Matching Account Error]
Regards
Balaji -
Error while adding a connector for SSL..help!!!
i'm getting this error when i added a connector for SSL and restarted tomcat
my connector tag is
<Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
<Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
</Connector>
LifecycleException: Protocol handler instantiation failed: java.lang.NullPointe
rException
at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
java:1368)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:609)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:2384)
at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET -
Error while adding a custom field with Input help via AET
Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
ShivaniThe question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET -
Error while adding a job to scheduler
Hello,
I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
Thanks.
[Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.Hi Rizwan Tahir ,
Delete the job server associated with the current batch job and recreate it.
Then try creating a new schedule using the new job server.
And take care that job server is created in QA environment.
Hope this should work.
Regards, -
Error while adding Image: ORA-00001: unique constraint
Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AMHi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators. -
Getting an error while adding the user in Sharepoint foundation 2010 environment.
Hi,
I am having full control access to SharePoint site. Then i tried add user for that site.
But i am getting following error while adding the user to the site.
An unexpected error has occurred.
Troubleshoot issues with microsoft SharePoint Foundation.
Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
Can you please help me anyone on this.
Thanks,
AshokThis could be any one of a number of things. You need to lookup the Correlation ID in the ULS logs on the SharePoint server. That should provide the additional information necessary to diagnose and solve the problem. Here's a blog post
on how to find the error.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
HELP --- Error while adding Portlets to the Page. (WWC-44012)
Hi all,
I have a pl/sql portlet. It compiles fine and shows up perfectly in portlet repository. But when i add this to the page, I get following error
Error while adding Portlets to the Page. (WWC-44012)
An unexpected error occurred: User-Defined Exception (WWC-43000)
An unexpected error occurred: User-Defined Exception (WWC-43000)
An unexpected error occurred: User-Defined Exception (WWC-51004)
(WWC-00000)
I checked the portlet specification file (.pks) and body file (.pkb) for any mistakes but they seems fine.
Does anyone know what can cause this error?
Any pointers in this regards will be highly appreciated.
Thanks!!!
RajeshRajesh,
Could you provide some more details about your code? I will try to look into possible causes of the error. One thing you may try is subscribing to the Knowledge Exchange on http://portalcenter.oracle.com. Then you could post your code in your community folder and everyone would be able to test it out.
Of course, this means you must be willing to share your code with everyone.
James -
Error: Internal error (WWC-00006)
An unexpected error has occurred in pages: ORA-06502: PL/SQL: numeric or value error: character to number conversion error (WWC-44847)
Couldn't save attribute Content_Owner. (WWV-03005)
Couldn't save attribute Content_Author. (WWV-03005)
Hi,
I am getting this error while adding portlets to my page group..any suggestions?
Thanks in advanceNo, This is happening with oracle defined portlets. But , I am also not able to add any navigation page as a portlet to any of my page. Is it any database back up issue? as I am testing something in UAT , in dev environment everything is fine.
Maybe you are looking for
-
Elgato Turbo.264?
So I am looking into expanding my mac mini for use of audio and video editing. I have used my mini for about a year now for doing professional audio editing in Logic Express and have found it just dandy, still do. But my 80GB internal harddrive was g
-
Photoshop Elements Version 6: Brush Dotting Issue
I'm having issues with my basic brushes. When I make a stroke with the mouse, the end product should be a smooth continuous stroke, but instead it's a dotted stroke. An example is below: As you can see, the stroke is dotted when it should be a smooth
-
Oracle Apps Roles and Responsibilities
hi, i need to know the people who should be supporting the Oracle Applications after its implementation. Are there documents that list the specific roles and responsibilities? Thanks! Gladys
-
Standard sap BACK, CANCEL icons affected by custom status - why?
Hello SDN Community, I was trying to clean up some items in the Function List display of my custom status and I had deleted a couple of items that I had created incorrectly. After that, I ran my transaction and clicked the standard sap EXIT icon. It
-
How can give permissions to the users in wiki?
Hi, in wiki how can give permissions to the users, i need to give one of the users full control for wiki only ( not the server ), so how can make this user wiki admin?.