RFC for HR_MAINTAIN_MASTERDATA
Hi
i looking to created a RFC call with function module HR_MAINTAIN_MASTERDATA, should i create a custom one or enchance the stardard one?
thanks
julian
Hi Julian
no need for creating the custom code
if your required code is to maintain HR master data in another system then very well raise a request for access key for this particular object then get that and change the normal function module attribute to RFC enabled.
cheers
S.Janagar
Similar Messages
-
ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS
Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeemHi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok -
BAPI/RFC for Service Complaints Creation in CRM 5.0
Hi,
We are working on the Complaints and Returns module in CRM 5.0. We have found the Transaction Code for the same. (CRMD_BUS2000120).
Not able to find the BAPI/RFC for the same.Let us know if any. Appreciate your comments on the same.
Thanks,
MoorthyHi,
Thanks for the response
I am not talking about Service Order. I have requirement to create a Service Complaint. For that the transaction is CRMD_BUS2000120. Now I need to find the function modules/RFC available for this requirement.
Hope it clarifies .
Even I have found function module called -CRM_COMPLAINT_API_CREATE but not sure right one
Thanks,
Moorthy -
BAPI OR RFC FOR CREATION OF MASTER DATA
Hi
I want BAPI or RFC for master data creation,(Vendor,Customer,material,Service master)
Vendor(MK01)
Customer(XD01)
Material(MM01)
Service Master(AC01)
Pls Help me on this
Regards
RajanHi ,
For material
BAPI_MATERIAL_SAVEDATA
For service
BAPI_SERVICE_CREATE -
"No valid RFC for the system VEP" in solman_setup in solman7.1
Hi Gurus,
I've installed Solman 7.1. Configured STMS as single domain alone. STMS was successfull and the RFC was created and that also successfull. But in solman_setup, in system preparation phase, check STMS, its throwing the error "No Valid RFC for the system VEP".
I tried deleting the RFC and recreating it, Deleting the STMS ans reconfiguring it, Tried 000, 001 and 100 client, Restarted the SAP server, Restarted the OS lvel also. But nothing works. I've searched but no solution works. Please suggest me what might be the solution for this.
And also I need to configure the MOPZ in solman 7.1. Please guide for that, since i've not doone in 7.1 and everything in this was new.
Thanks and Regards,
Santhosh Kumar.Issue resolved by activating single system landscape in STMS.
Regards,
Santhosh Kumar. -
How to start SAPGUI at entry point to RFC for debugging (using JCO)?
Hi,
I am calling an RFC using JCO and trying to have the SAPGUI pop up at the entry point to the RFC for debugging. But it is not working on Mac OS X.
I activate the debug via
JCO.Client client = JCO.createClient(..);
client.setAbapDebug(true);
client.setSapGui(1);
client.connect();
it gives error:
sh: line 1: /usr/sap/DV2/SYS/exe/run/sapgui: No such file or directory
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Start 'sapgui' failed.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
I then tried to set environment variable SAPGUI=/Applications/SAPGUI\ for\ Java\ 6.3r5.2/SAPGUI\ 6.30rev5.2.app/Contents/MacOS/SAPGUI
and it then starts up the SAPGUI for Java Logon Pad.
But, I want the SAPGUI to start up at the entry point to the RFC.
Is this possible in Mac OS X? It has worked before on Windows using the RFC SDK utilities or middleware tools such as IBM Crossworlds.
ThanksHi Robert,
Thanks for the reply, it was very helpful as I had given up hope on getting a solution. Unfortunately I am still getting an error.
1) I created a script as per your directions containing
"/Applications/SAPGUI for Java 6.3r5.2/SAPGUI 6.30rev5.2.app/Contents/MacOS/SAPGUI" -n -o $*
2) Now the SAPGUI application starts, but does not open a window and I get the error:
ERROR #############################
18.05. 11:58:42.943 ERROR: AgiWindowAdaptor::update: no menu
ERROR #############################
3) I switched on the tracekeys with -t CON,SES,EVT,C_AGI to get more detail:
18.05. 11:58:41.420 TRC: Active trace keys: CON,SES,EVT,C_AGI
18.05. 11:58:42.709 CON: new GuiConnection
18.05. 11:58:42.727 CON: GuiConnection.open(/H/<appserver>/S/3235&rfcid=02D5428B909E32190000,tmp)
18.05. 11:58:42.846 CON: new GuiNiNetConnection
18.05. 11:58:42.872 CON: GuiNiNetConnection.open(conn=/H/<appserver>/S/3235&cpg=1127&jenc=MacRoman&jloc=en&rfcid=02D5428B909E32190000)
18.05. 11:58:42.872 CON: GuiNiNetConnection.open: resolved hostSpec = /H/<appserver>/S/3235
18.05. 11:58:42.915 CON: -
18.05. 11:58:42.916 CON: GuiNiNetConnection: sending DIAG data to connection for modus 0
18.05. 11:58:42.918 CON: -
18.05. 11:58:42.919 CON: GuiNiNetConnection: sending DIAG data to connection for modus 0
18.05. 11:58:42.927 C_AGI: calling AgiSessionPool->ParseIt() for modus 0
18.05. 11:58:42.929 C_AGI: AgiLibAdaptor::onNewPrimary
18.05. 11:58:42.941 C_AGI: returned from AgiSessionPool->ParseIt() for modus 0
ERROR #############################
18.05. 11:58:42.943 ERROR: AgiWindowAdaptor::update: no menu
ERROR #############################
18.05. 11:58:42.950 SES: GuiAutomationProcessor: processing automation call list for modus id 0
18.05. 11:58:43.043 SES: new GuiSession
18.05. 11:58:50.557 CON: GuiNiNetConnection: sending CLOSE data to writer thread
18.05. 11:58:50.791 CON: -
18.05. 11:58:50.791 CON: GuiNiNetConnection: sending DIAG data to connection for modus -1
18.05. 11:58:50.793 C_AGI: AgiLibAdaptor::onDelContainer
18.05. 11:58:50.794 C_AGI: AgiLibAdaptor::onDelContainer
18.05. 11:58:50.794 C_AGI: AgiLibAdaptor::onDelPrimary
18.05. 11:58:50.795 CON: GuiConnection.destroyNetConnectionAndParser
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Start 'sapgui' failed.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1098)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:2983)
Any further ideas on what is wrong? There is a post on another forum http://listserv.sap.com/pipermail/linux.general/2002-June/002538.html with the same error, but no response..
Thanks,
Richard -
Regarding RFC for SD n MM related to RFID
hi all
Will anybody give RFC for delivry of goods in Retail m using RFID technology
Regards
Abhijeettry to make use of Tcode BAPI
or
search in SE37 with search terms delivery.
Regards
Prabhu -
hi all,
can any one help please..
i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
regards,
devi....hi all,
can any one help please..
i am searching for a bapi or RFC for t-code f-32..please help me if any one know about this.
regards,
devi.... -
Exact inbound Idoc or RFC for BP based on ROLE/Customer/Vendor ?
Hi ,
I need a inbound IDOC or RFC for Business partner in BP transaction posting based on Customer master or vendor master Role ...Hi Frederic,
I need to post data in to BP transaction(customer master data and vendor master) role using BODS via IDOC. Required IDOC's for posting. -
BAPI or RFC for replicate the transaction LX03
Hi experts,
anyone know any BAPI or RFC for replicate the transaction LX03?
ThanksThere are no alternate transaction for OBY6
-
Hi All,
Currently i'm working on ESS(Employement Self Service). I found all the infotypes needed for my project. But i found only 4 function modules to handle those infotypes. But i need to handle EDUCATION, QUALIFICATION and PREVIOUS EMPLOYEMENT infotypes. For that i need standard RFC's.
Is there any standard RFC's available to handle these infotypes???? If yes please help me by providing those RFC's.
Thanks in Advance
SM NizamudeenHi JC,
This is old RFC. But i need new RFC for particular country.
For example RFC's like "HRXSS_PER_READ_P0002_IN" are used to handle the employees personal data in india.
Like this i need RFC for education, previous employment and qualification....
Please revert back ASAP
Thanks in Advance
SM Nizamudeen -
How to create Rfc for EP system in Solution manager
Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving " NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhirajHello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY TAGGED
- WBO_REL_REQ_STRATEGY MANUAL
For quality and production Java system (target systems):
- CTC 1
- CTS_SYSTEM_TYPE JAVA (others for a MDM system)
- NON_ABAP_SYSTEM 1
- COMMUNICATION_SYSTEM: (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ -
Web services enabled RFC for SO creation in SAP 5.0 is not responding
Dear Members,
Third party application is not able to getting response from SAP R/3 web service enabled RFC.
We have created a RFC for creation of Sales order by passing mandatory values into SAP thorugh third party application from outside SAP. Accessing RFC in SAP through Web service is not sending response properly. However Sales Order is getting created in the SAP system perfactly, in return to third party application to out side SAP through web service throughing an Exception.
As standalone RFC in SAP, which is creating Sales order perfactly.
Here we have deleted web service of RFC many times and recreated also, still the problem is not get resolved.
Web services is got configured perfactly in the SAP, because other RFCs are working fine.
Please someone suggest how to resolve this issue in case of Sales Order creation through web service enabled.
SudheerHi ARC,
Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
Runtime Error UNCAUGHT_EXCEPTION
Except. CX_SOAP_CORE
Date and Time 07.05.2008 20:13:24
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
be terminated -
Can we copy and use existing RFC for portal XSS
We have a requirement to develop RFC for 0022, so that i can be called in the portal for employee educational details.
As you mentioned below, can i use the same logic on FM's for 0002(personal Data) to develope FM's for 0022( Educational Data)
It is urgent..Please reply ASAP
Please also let me know, the way to find RFC's used in particular webdynpro. We are using ECC6.0.
Thanx
Priya
Can i used the below fm by copying them as Z and editing the required data
HRXSS_PER_DELETE_P0002_IN Select the given record for edit
HRXSS_PER_EDIT_P0002_IN Select the given record for edit
HRXSS_PER_MODIFY_P0002_IN Modify selected record with given record
HRXSS_PER_NEW_P0002_IN Create new record of given infotype/subtype
HRXSS_PER_READ_P0002_IN read all records of an infotype relevant for ESS PersInfoHi,
We solved this issue by using custom API process, also we used ASO oracle packages.
Thanks,
LSP -
RFC For IDoc outbound processing
I am creating an RFC for BDC for call transaction we19
input as : idoc number
and output:-.. iDoc Outbound processing done
so:-
I go to we19> give iDoc Number (say, some number for ALEREQ01), and execute> click on Outbound processing-->click enter -->enter
in this way, I can process any iDoc from SAP system to outbound.
I want to create RFC for the same.
Problem:-
when i am executing that RFC, and when I check the iDoc status in we05, that iDoc shows status as Idoc ready to dispatch( its in yellow color).. Its not showing green color and not saying that IDoc passed OK
when I try manually ,I see the status green..OK..successfully
Any idea why I am getting this problem??
Is there any problem in my BDC recording?..but when I run that recording for Process, i dont see any problem,it executes successfully.. but when I copy the Code from BDC and make a RFC using that code, its giving problem as mentioned.Hi Ankit,
Theorotically it should work.... but I'll suggest not to use BDC here. What you can do is,
1. You have Idoc number..Right?
2. Read control record from EDIDC and data record from EDID4.
3. Then call Master_idoc_distribute.
4. This will again distribute the same IDoc with same control and data record as a new one. It will be same as WE19 , but without WE19.
Please check and confirm.
Regards,
Audy.
Maybe you are looking for
-
Please help! I have been in to settings for the printer on my Lap-top and can not find anywhere that will allow me to adjust to just printing in Black and White when I need it and not Colour all the time, which it is doing!
-
ITunes Library on Multiple iPods?
Can one iTunes library supply multiple iPods? If I have an iTunes library on my computer, and I have already put that music on my iPod, can I put that same library on a second iPod, without affecting the viability of the library ? If so, will I still
-
ITunes playlist not playing properly in slideshow
I have an iPhoto slideshow that I have set to play an iTunes playlist. Within iTunes I've cropped off some of the deadspace in the songs, so that when I watch the slideshow I don't have slides passing by without sound. My problem is that when I play
-
I am a cloud member and my cs6 encore lost its library of templates, how to i get them back
I am a cloud member and my cs6 encore lost its library of templates, how to i get them back
-
Unable to checkin Original in PLM Web UI
Hello Gurus, I am unable to checkin the originals PLM Web UI and also a duplicate content version gets created. Please see the attached screen shot. The below message stays for few seconds and then disappears automatically I checked the content vers