RFC from ECC 6.0 to SRM 3.0

Hi experts i'd like to know if is possible to make a RFC frome ECC 6.0 to SRM 3.0 in order to read the Purchasing Groups in the Plant Structure of SRM (ppoma_bbp)
thanks a lot
regards
andrea

Hi,
Use the FM mentioned in the previous reply.If you want to find all the p groups maintained under one single org unit/node,pass the org unit no of that node/org in the import parameter IV_ORGUNIT of the FM "BBP_OM_DETERMINE_RESP_PGRP".In the export parameter," ET_PURCH_DATA",you can see all the Pur groups maintained under that single node/Org unit.
Only change you will hae to do for calling this FM from ECC,is make a copy of this FM in SRM and make it REMOTE enabled so that you can call this FM via RFC from ECC.
BR,
Disha.
DO reward points for useful answers.

Similar Messages

RFC from ECC to GRC

Hi All,
We are facing one issue.
In GRC fire fighters,
1) FF logs not updating in Consolidated reporting
2) FF logs are updating in FF LOG REPORT, but the session details are empty
3) FF log updated in Reason code & activity report, it is fine
4) FF logs are not updating in Transaction log and session details report.
We observed one thing that the RFC from ECC to GRC is failed. Is this a reason ? if yes , how the FF log report and reason code report is updated with FF logs ? if no, please suggest the solution.
1) Verified all the notes not suited
2) Jobs are successful
3) Time Zones are in sync
and in ECC we are getting one dump (TIME_OUT) for the program /GRCPI/CL_GRIA_LOG============CP.
What kind of effect it shows on logs. Actually i navigated to ECC dump through GRC SLG1 logs (ID : LOG_SYNC/).
Please suggest.
Thanks,
Sankar.

Hi Sankar
Have you searched marketplace and what SP are you on?
Examples
1940822 - Log report is failing due to Time Out error
1928475 - Getting TIME_OUT errors from /GRCPI/CL_GRIA_LOG
I recommend you go to marketplace and work through messages under group GRC-SAC-EAM and also search for the program
Regards
Colleen

Replication of materials from ECC 6.0 to SRM

Hi ,
1 ) Please tell me the steps for replicating the Materials from ECC6.0 to SRM.
2) if we are trying to push the P.R from ECC 6.0 to SRM (PDP Scenario) whether the material should be
there in SRM already?
Regards
G.Ganesh Kumar

Hi Andrea,
I write to pull the master data from ECC as per the guide line given in the link. But there some problem. No master data is being transferred to SRM server from the ECC.
I am stuck in the process R3AS. When I am running the transaction and seeing the status in R3AM1, the indicator shows, the program is running.
But when I see the report through SMQ1, the staus is SYS Failure. on further drill down, The error is " The current application triggered a termination "
Can you help me in sorting out the problem and when I have gone wrong. If you have any documents for step by step procedure for the same, can you forward to my id, darpan2k6 in gmail.
Regards
Edited by: imdarpan on Mar 12, 2010 5:53 PM

Scheduling agreement from ECC 6.0 to SRM EBP 5.0

Hi experts
is there a way to send from ECC 6.0 to SRM EBP 5.0 all the kinds of scheduling agreements?
thanks
regards
andrea

Hi Andrea,
It is not possible to send Scheduling agreements from ECC to EBP.Same is the case with contracts.
You can only upload backend contracts to SRM. Using GOA you can create either a contract or a Scheduling agreement in R/3.
As informed by Usman, when you integrate R/3 (MM) with SUS it is possible to send S.As to vendors via SUS.
Hope this makes you more clear.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Import vendors from Ecc 6.0 to SRM 7.0

Hi experts
i'd like to know if there is a guide or a blog where it is illustred the way to import, for the first time, vendors from R3 to SRM-EBP
Is needed only BBPGETVD? and for the update?
regards.
andrea

Hi,
The initial load from ECC system to SRM system is done by the transaction BBPGETVD. Here after the changes for vendor data is replicated to SRM system by the transaction BBPUPDVD.
T-code BBPGETVD,
a)      Specify the RFC destination of the R/3 backend in the System field
b)      Specify the vendor number or range to be downloaded
c)      Enter the purchasing organization
d)      Enter the object ID - this is the object ID for the Vendor unit in the organizational structure as defined in PPOMA_BBP
e)      Select "Transfer Only R/3 Numbers"
f)      Click on Start Transfer
Transaction BBPUPDVD
In this transaction you will update vendor master data into SRM to replicate the changes, if any, from back-end ECC system.
a)      Specify the RFC destination of the R/3 backend in the System field
b)      Specify the vendor number or range to be updated for any changes done in the backend vendor master
c)      Enter the purchasing organization
d)      Enter the object ID - this is the object ID for the Vendor unit in the organizational structure as defined in PPOMA_BBP
e)      Select "Transfer Only R/3 Numbers"
f)      Click on Start Transfer
Regards,
Sheetal.

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

Replicated vendor email address from ECC 5.0 to SRM 5.0

Hi All
Currently, we are trying to replicate vendor email address from ECC to SRM. We use Vendor Master General Email (SMTP_ADDR) to store different email address
1. ) Case One
- Vendor email address for vendor account receivable
- Vendor email address for procurement
- Vendor email address for return invoice
Our system : SRM will only replicate defaulted vendor email address ( Standard Number )
Question : Is it possible to replicate all email address ( the above 3 email address).
2.) Case Two
When we only one email address for vendor account receivable, we dont want to replicate to SRM.
Question: Is possible to block this vendor email address and do not replicate to SRM ?
Thank You
Alex

>>Will XI 3.0 able to work with ECC 6.0 without any change or any change is required in the XI configuration level, please specify?
As far as I know, no change is required in XI configuration.
Regards,
Praveen Gujjeti.

Transferring Search Help values from ECC 6.0 to SRM 7.0

Hi SAP experts,
I have a requirement to display the search help values for a data element in ECC 6.0 into the custom data element that I created on SRM 7.0.
Is there a BAPI that I can use to retrieve the values for a search help element (for example SH_ANLKA) from the the ECC into SRM?
Your advise would be greatly appreciated!
Regards,
Andrew

Hi Andrew,
I have got a similar requirement to fetch the PO details from ECC search help to a new SRM search help. Please help me with the procedure you used for the above scenario.
Thanks,
Santosh.

Material Replication from ECC 6.0 to SRM 7.0 (PPS)

Hi,
I am working on SRM 7.0 (PPS) classic senerio and ECC 6.0.
I am trying for delta download regarding Product Masters but i m not able to get success.
ERROR "Exception condition "GUIDFOR_LOGSYS_CHANGED" rais"_
Please help.
Sumit.

Hi,
This is because the Log system entry in your ECC system has been changed after the first time it was setup.
Kindly refer note 765018 to resolve your error.
Regards,
Nikhil

Problem in Importing RFC from ECQ to XIQ

Hi.....
I have a problem in importing the RFC from ECC Quality Server to PI Quality Server.......
When I fill the fields like
Application Server......
System Number.....
UserName
Password.....
I am getting a screen Problem.....in which error information is given....
One of the error is UserName(XXXX) cannot have access to aii.sap......
Please help me.....
Thanks,
Sudheer

Hi Sudheer,
Kindly check the user having all authorizations which you are try to importing the RFC's from ECQ to XIQ, check with your basis team and try to provide the required authorizations for that particular user.
Then you can able to import RFC's and do the design by activating the objects.
Regards
Venkat Rao .G

RFC enabled FM to fetch partner details of vendor from ECC system

Hi All,
I am working on an enhancement in SRM system.the requirement is as follows.
1.In the current SRM application, the invoicing party partner function does not exist.Because of this, the invoicing party cannot be populated on any external purchasing documents such as RFQ, PO, RO, contracts.
2.This functionality exists in ECC. In ECC, the user can enter an invoicing party on a vendor master record.The invoicing party functionality will be deployed to SRM so that external purchasing documents are populated with the correct invoicing party.There is a standard vendor replication program for this...
To accomplish the above said functionality, I have planned to do like this in SRM system....
1.There is a BADI "BBP_DOC_CHANGE_BADI" with a method "BBP_PO_CHANGE ". This will get triggered when a PO is getting created or changed.
2.In that there is a table called IT_PARTNERS which will have all the partner details in it.
3.I will take the partner (vendor number i.e.,partner function is 0000019) and pass that value to an RFC enabled function module which will fetch the invoicing party from ECC system.
4.Later that Invoicing party number is appended to the IT_PARTNERS so that it will be populated on any external purchasing documents.
Here I want to know whether any standard RFC enabled function module which fetches the invoice party details from ECC system.
Awaiting your answers...
Thanks,
Ravee..

Hi. Just use function RFC_READ_TABLE and table WYT3.
Regards,
Dave.

Delivery address replication from ECC to SRM

Hello All
We are onboarding a punch-out vendor in SRM. The Vendor said that they won't read the delivery address sent by us in the PO output, but would rather pre-store all the delivery addresses and their codes.
The code would be auto read & this way they can ship immediately with just 1 day lead time.
We are using classic scenario and noticed that when the PO is created in the backend, it always creates a new address number each time , even for the same address.
We are mulling about a process where the Ship to address would be created in ECC and replicated to SRM , with the same number as ECC.
So my question is :
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Thanks
Kedar

Hi Kedar,
1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
Ans : You can create delivery address in SRM from ECC by creating a Report and Utilizing RFC function module to read address
data from ECC and creating the same in SRM through FM BBP_BUPA_ADDRESS_ADD [i hope the FM is correct as i do not have the system now].
I dont know of any standard interface though ....
2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
Ans : Does not look possible to be .. since there are amny type of addresses in the system all uses the same internal number range. You can utilize some of unused field in delivery address to store the address number of ECC system like Building code , Street_suppl 3 etc ...
However i suggest do not make things complex and keep it simple.
Cheers
Iftekhar Alam

SEND PR data from ECC to SRM using PI

Hi PI Guru's
Please advise if there is any documentation to send the PR's from ECC to SRM using PI.
If not PRs in general if need to exchange any documents from ECC6.0 to/from SRM using PI.
Can we use ABAP proxys or IDOCs.
Any help would be greatly appreciated.
Rgds
Nikki

decide proxy or IDOC or RFC based on the business requirement, first search any std IDOc or RFc available if not then go for proxies.
chirag

Debugging from ECC into SRM

Hi everyone,
I've been studying some programs in ECC that call functions in SRM (RFCs).
Do you know what I should do in order to start debugging in ECC and continue with the debugging in SRM?
I also need to do the opposite: debug a program in SRM and its RFCs in ECC.
I've read recommendations concerning web debugging, and it consisted of setting
GENERATEDYNPRO parameter equal to 1 in SICF transaction. Is there another parameter to be considered for the aforementioned situation?
Thanks in advance!
Henrique

If you want to do some debugging from one system to the other, set the RFC user that is used in the RFC connection which is used when the FM is called to DIALOG in SU01.
Set a break point just before the call to the backend. Now use F5 to jump to the other system. This works both ways.
For example take SRM to ECC with order replication in Extended Classic Scenario:
1. Set a session breakpoint in function module B46B_DPO_TRANSFER on line 290 (at least when using ECS scenario and SRM 5 with ECC 6 as backend) where the FM BBP_PO_INBOUND is called:
CALL FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination
The lv_destination is the SM59 RFC connection (the user defined in this connection must be dialog and have debugging rights, or you can change the destination here).
2. Find a GUID of an order and enter this GUID in FM BBP_PD_PO_TRANSFER_EXEC_V2 (or BBP_PD_PO_TRANSFER_EXEC)
3. When it stops at your breakpoint hit F5 for the next step (enter the FM) and you will continue to debug in the called system.

Debugging RFC function module from ECC to CRM

Hi All,
My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
I logged in to ECC report program and kept an external breakpoint just before the function module call.
I logged in to CRM system, opened the function module and kept an external breakpoint there.
In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
In CRM I activated the external break point in transaction SRDEBUG.
Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
Please let me know if I missed anything.
Thanks and Regards,
Naren

Hi,
Debug RFC calls
When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
Scenario 1: Calling a custom RFC FM
STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
Scenario 2: Calling a Standard RFC FM
When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
Note: User name configured in the RFC destination (transaction SM59)
Note: User type for the RFC User (transaction SU01D)
Hope this will be helpful..

RFC from ECC 6.0 to SRM 3.0

Similar Messages

Maybe you are looking for