RFC gateway setup in XI and R3

Hi All,
The sceanario is RFC calling target system through XI.
Do we need to create one RFC destination in XI and another one in R3 for achieving this. And what are the parameters (gatewayhost, service, program id ) need to be supplied. Much appreciated.
Thanks,
Deno

Hi,
<i>Created RFC dest in XI as registered server program with Gateway host and service as R3 smgw--> gateway host and service. Then in R3, what type of destination do i need to call this programid for connecting..Please correct me if anything is wrong here..</i>
1. Created RFC destination with PROGRAM ID.
2. Create sender RFC adapter and put the details and put the same program ID that you have given in RFC destination
3. Test the RFC destination and see if it's working.
4. Complete your IR and ID config
5. Run RFC from transaction SE37 with the RFC destination created in the step 1 and all input values.
Regards
Vijaya

Similar Messages

Diff... between ALE, IDOC, RFC, BAPI, BADI --- Not clear and clarify

Hi All
    I am learning XI and the difference between " ALE, IDOC, RFC, BAPI, BADI "
    Not clear and when to use what and how in point of XI ?
   Pl..clarify me
Adv..thanks and points
--- Rakesh Behera

Hi
This will expalin you every thing ...pl..go through
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
I hope this will help you to understand the difference bet..those
regards
--- prasad

How do setup multiple send and receive domain on single virtual ironport?

HI all
how do i setup multiple send and receive domain on single virtual ironport?
Daemien

Please use the admin guide to assist you for setup/configuration:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/user_guide/ESA_8-0-1_User_Guide.pdf
On the VESA - the Recipient Access Table (RAT) will control which domains your appliance accepts for.
AsyncOS uses a Recipient Access Table (RAT) for each public listener to manage accept and reject actions for recipient addresses. Recipent addresses include these:
•Domains
•Email addresses
•Groups of email addresses
This is covered in detail in the "Overview of Accepting or Rejecting Connections Based on the Recipient’s Address" section.
Please see the "Configuring the Gateway to Receive Email" section for configuration of appliance for domains.
Please see the "Defining Which Hosts Are Allowed to Connect Using the Host Access Table (HAT)" section for configuration of appliance for sending.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

Gateway Setup Assistant on a 10..x.y.z subnet

Hi,
I'm trying to use Gateway Setup Assistant on a 10..x.y.z subnet.....
BUT
the assistant tells me that it will siwtch everything to 192.168.0.x !!!! which i obviously do not want
Hence, how can i use that assistant without screwing up my current subnet setup OR how can i setup that gateway manually ?
Thks
Laurent

Hi,
>>can u pls explain what is this mounting?
Mounting is equivalent to creating a map drive in Windows.
To know more about mounting check this page http://www.techotopia.com/index.php/Sharing_Ubuntu_Linux_Folders_with_Remote_Linux_and_UNIX_Systems
>>If i use ftp..what do i use for port?
he standard port for FTP communication is port 21. Also you can check this link http://www.zephyrcorp.com/unix-ftp.htm
I will suggest you to do some google and find it out yourself. You will get lot more of information on these
Regards
suraj

I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

I am trying to setup iCloud account and when I login I see a popup. The Maximum number of free accounts have been activated on this iPhone. Pls, help me fix it. What other accounts? Thanks

Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

Mobile account setup stops syncing and acts like a network user

Mobile account setup stops syncing and acts like a network user system under ODM
Setup: Mobile laptop users authenticating against an ODM. Every user has a networked home directory on an Xserve. The whole setup is 10.4 (client and server). All systems run a standard image. Most effected systems have been re-imaged since the onset of the issue.
Issue: Some of the users are not syncing properly every time. It is as if the system forgets it is a mobile system and reverts to using the User's network home (instead of saving to /Users and syncing). If the user is effected, the system will not even accept cached credentials if they are off network. This forgetfulness does not seem to follow any pattern and does not effect all of our mobile users.
In mucking about trying to find a cause to this issue I ran across an oddity in all effected systems Netinfo database. The users are each listed twice. Each entry has the same username, short name and UID. Also, In each case one record looks wrong... this varies somewhat from user to user, but in each case there is marked difference in the record's contents. Deleting the incomplete record in Netinfo manager seems to solve the issue (seems, as we are very early in testing this).
Anyone have a clues as to where this double came from? The only lead so far is that it looks like the users having issues pre-date the use of mobile accounts. At some time they all had local accounts that authenticated against the ODM but never synced or had networked home directories. The pool of users who just got laptops (and thus never had a local account) seem unaffected so far.
Also, what is the best way to browse the ODM master to find these duplicates?

I have a similar issue with computers bound to Active Directory. Users occasionally have a problem logging into their computers even though their account is fine. Logging in as Admin and running netinfo manager always shows duplicate user accounts. Deleting the one that says disabled always clears up the issue. I'd like to find a startup script that would delete the disabled account, thus preventing the issue.

How to Setup Service Desk and CHARM in Solu Man 4.0

Hi Gurus
I am New to Solution Manager 4.0 and i want to setup Service Desk and Change Request Management for my client. Any one help me to guide where i can start and after configuring how the functionality of service desk and change request management.
Can anybody send the documents with screen shot how to configure and how it lokks after Configuration.
My client requirement is he wants to make Service desk as a ticketing tool and Charm as Change management tool
Please help me
Piont rewarded for solution
Rajesh

Hello
I have configured Ibase for Charm, i followed spro config info as follows:
Manually Create and Assign the Component Systems asiBase
In this IMG activity, you define the Installed Base (iBase) manually, that is for refreshing existing iBases after solutions have been changed.
An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
For the Value Added Reseller (VAR), it is not absolutely necessary to manually define the iBase at this point. We recommend, however, that you carry out this step so that you have a functioning test scenario.
Activities
1. In transaction Change Installed Base (IB52), choose iBase No. 1 (SOL_MAN_DATA_REP).
2. Create under the IBase Header (SOL_MAN_DATA_REP) an IBase component, for example the SAP component system (SAP WEB AS) or use an existing one.
3. To assign the systems as iBase components, go to the Text item tab.
Three components are included in the standard package.
4. Add all the satellite systems as text items to the table:
Column Short text: Description of the system
Column Identification: System ID, installation number, client
5. Save.
After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
Note:
Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
If the identification is not entered correctly, the system cannot correctly identify the component from the incoming Service Desk message.
Its really good and I have set up the config in that way only.
If useful reward the points.
Thanks
Regards
Sharmishtha

HT201441 Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

Hi Just bought ipad 2 off someone they showed it to me working and the removed it from icloud and reset. now have started to setup at home and it is asking for an apple id he or i do not know what should i do ?

Restore the Device as New. See Section 6 here... http://support.apple.com/kb/HT4137
Note:
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

Help Setup wireless trackpad and keyboard

I have a new straight out of the box Mac mini, wireless keyboard and wireless trackpad. How can I set these up? I can use the trackpad to move around on the screen, but I cannot seem to click. I can't figure out what the icons means.
All advise appreciated.

Welcome to Apple discussions. I am assuming you are new to Mac. Please accept my apologies if this is a patronising assumption.
You need to setup these devices using the Bluetooth Setup Assistant, keyboard and trackpad in System Preferences.
1. Open System Preferences either in the Dock or from the Applications folder in Finder
2. Select Bluetooth and ensure that it is switched on and discoverable.
3. Select 'Set Up New Device' and the Bluetooth Setup Assistant will open in a new dialogue window.
4. Follow the directions to connect to your trackpad. Repeat to connect to keyboard.
5. In System Preferences application select Trackpad or Keyboard to select your preferred settings.
You should be able to set the gestures to make full use of the trackpad. Good luck with your Mac Mini!

I have an Airport Extreme, it's only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again."

I have an Airport Extreme, the light is only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again." I've tried my iphone 4 with the same result. I've tried the utilty on my pc and same result. The airport is producing a great wireless signal and working to all devices. I really just want to get in and set the password.

eddiedaly wrote:
I have reset several times with no success.
When you did those resets, did you continue to hold in the reset button until the status light blinked several times? If you didn't, then you didn't do a full reset.
Here's what I do to reset an AirPort base station: I unplug it, press in the reset button, then, while continuing to hold in the reset button, I plug it in. (Yes, doing this can be easier for people with more than two hands!) I then watch the status light and wait until it flashes rapidly several times.
I have a Time Capsule that I couldn't configure at one point. To recover from that I had to unplug it for many hours. You might try unplugging your unit overnight.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your original message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1.

I did not install icloud when setup my ipad and now I cannot install icloud on ipad 3 with ios 8.1. Everything in Settings is complete and correct. I can log in from my PC with no trouble. If I go to icloud.com on Safari on the ipad, it takes me to a instruction page which only says to complete icloud in Settings.

That's happening because icloud.com is not designed to be viewed from the mobile version of Safari on your iPad, only from your computer browser.* You can still access it on your iPad if you're running iOS 8 by going to icloud.com, then tapping on the address bar where the url is displayed, tap the center of the screen and drag down, then tap "Request Desktop Site" under the address bar at the top. This will load the full desktop version of icloud.com. You'll find, however, that not all of the the features will respond to the touch screen.
* That's because all of your iCloud data is already on your iPad and can be accessed from within the apps that you are syncing with iCloud (contacts, calendars, notes, reminders, etc.) If you need to use Find My iPhone (iPad), you can download the free Find My iPhone app to do so.

HT4145 I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

I want to add airport express. I now have time capsule and I am confuse. Do I setup the express and then time capsule to the express?

Setup the Express to wirelessly extend the Time Capsule, or vice versa depending on which one is already set up. Or you could use bridge mode which involves using an Ethernet cable or Powerline plugs.

Can anyone tell me how to setup odbc driver and configure in the setup

Can anyone tell me how to setup odbc driver and configure in the setup

You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.

Creating Adaptive RFC model without logon name and pwd?

Hi All,
I have this requirement where when I log on to an application I need to get a mapped user name and pwd from EP and then connect to the R/3 system.
However, you cannot create a Adaptive RFC model without username and password. So i needed to know if this can be done in some other way.
Thanks,
Malita

hi
To my understading , you need user and pwd created for your portal and call the RFC or Bapi .
Hope this is possible .
Creating the users and pwd for the portal for your application is possible , but parallelly
calling the RFC with same user name and pwd i hope its not , as you have to deploy the application
which created the userid and pwd , then call the RFC ,
and for more you can provide more information what exactly is your requirement .

Urgent -Create RFC for update the database and delete from the database

Hi Guy's,
Please help me how to create the RFC for update to databse and delete from database(step-by-step) procedure.
Thanks and Regards,
Sai.

Hi,
Please go through the following link,
reward if helps.
[RFC Step By Step|https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728]
regards,
mahantesh

RFC gateway setup in XI and R3

Similar Messages

Maybe you are looking for