Rfc generation error

Hello all
I'm trying to connect my other systems to solution manager as satelitte systems. I am in transaction smsy where i have 2 options for genaration my rfc destination. To use the wizard or without it.
In every system and in solution manager i have created an user that contais the autorization object s_rfc and s_rfcacl.
If i use use the wizard for rfc destination generation i get the folowing error message.
No RFC destination assigned for read access for client 001
Message no. SMSY_EDIT_LANDSCAPE150
Diagnosis
You tried to assign RFC destinations for the system NTC for central system monitoring, but there is no RFC destination for read access for the current client (001).
System Response
The RFC destinations cannot be assigned to the system monitoring.
Procedure
1. Assign an RFC destination for read access to the client (001), or generate an RFC destination for read access for the client.
2. Assign the RFC destination for system monitoring again.
Alternatively, you can use transaction RZ21 to make this assignment
directly (choose Technical Infrastructure -> Display Topology).
If i don't use the wizard and i select exactly the same checks as in wizard everthing looks ok (is green).
In both cases when i test the rfc connection evertyng works, When i read system data again evertying is ok.
I can't figure if it is a problem with the wizard or i'm missing something when i use the manual configuration.

Hi Berbece Alexandru,
I am also geting exactly the same  error now.. In smsy when generate rfc with assistent out of 10 message txt  first 9 of them shows green. last one says
"No RFC destination assigned for read access for client 100"
I have attached the error message. Hope you have fixed the issue.
PLease help me to fix the issue.. ?..
================================
No RFC destination assigned for read access for client 100 Message no. SMSY_EDIT_LANDSCAPE150
Diagnosis
You tried to assign RFC destinations for the system NTC for central system monitoring, but there is no RFC destination for read access for the current client (001).
System Response
The RFC destinations cannot be assigned to the system monitoring.
Procedure
1. Assign an RFC destination for read access to the client (001), or generate an RFC destination for read access for the client.
2. Assign the RFC destination for system monitoring again.
Alternatively, you can use transaction RZ21 to make this assignment
directly (choose Technical Infrastructure -> Display Topology).
===============================================
How did you fix the issue ?.

Similar Messages

  • MDX Query consumption in NW Gateway model - RFC Connectivity error

    Hi Gurus,
    As per the blog( http://scn.sap.com/community/netweaver-gateway/blog/2012/12/08/transform-sap-bw-queries-into-odata-service-generation-and-activation ) I have created odata model in SEGW transaction. I am getting Rfc connection error -( 'SQL error 10760 when accessing tab) as described in the screenshot while generating runtime objects. Please help me.
    Ganesh.

    I am closing this question as the issue is resolved. The problem is with RFC Connection.

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • RFC connection Error in SLDCheck

    Hi All,
    I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
    the error in register server program
    Error Details     ERROR: program LCRSAPRFC_XID not registered
    now wht i have to do for troubleshooting
    Regards

    Thanx  for reply
    when I test connection to  Connection Test SLD_UC     error
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program SLD_UC not registered
    Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
    Error Details     DETAIL: TP SLD_UC not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 62
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1778
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 701
    Error Details     TIME: Fri Jan  8 11:05:42 2010
    Error Details     VERSION: 2
    RFC SLD_UC is connection T 
    Gateway Host  sapdevpi
    Gateway server  sapgw00
    same error with
    Connection Test SLD_NUC
    Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
    Connection Test SAPJ2EE
    In Connection Test LCRSAPRFC error  program id LCRSAPRFC_DPI
    Logon     Cancel
    Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
    Error Details     ERROR: max no of 100 conversations exceeded
    Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
    Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
    Error Details     COUNTER: 82
    Error Details     MODULE: r3cpic_mt.c
    Error Details     LINE: 10791
    Error Details     RETURN CODE: 466
    Error Details     SUBRC: 0
    Error Details     RELEASE: 701
    Error Details     TIME: Fri Jan  8 11:12:56 2010
    Error Details     VERSION: 3
    Regards
    shahid

  • RFC connection Error

    Dear All,
        when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur  in particular instance .(Other instance working fine in BI system)
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: timeout during allocate
    Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
    Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 162003
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1973
    Error Details     RETURN CODE: 242
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Mon Apr 27 14:29:33 2009
    Error Details     VERSION: 2
    Any one please suggest.
    Thanks,
    Thirumoorthy.

    mostly your gateway servicve is not working check smgw tcode on that instance
    you can do this goto sm59->select the instace execute tcode smgw
    easy way is restart the instance
    it will start working
    Samrat

  • RFC Connection error in SM59 for SAP J2EE

    Hi All,
    i am getting the following error description while testing the connection for
    SAP J2EE ...
    Connection Test SAPJ2EE  
    Connection Type TCP/IP Connection  
    Logon              Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program sapfallback not registered
    Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
    Error Details     DETAIL: TP sapfallback not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 1483
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1694
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Tue Mar 31 02:44:35 2009
    Error Details     VERSION: 2
    Help me resolve this
    Regards,
    Mahesh.

    Hi,
    Please follow this steps:
    Creating RFC Destinations in the ABAP and Java Environment
    You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
    u2022 AI_RUNTIME_JCOSERVER
    u2022 AI_DIRECTORY_JCOSERVER
    u2022 LCRSAPRFC
    u2022 SAPSLDAPI
    Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
    Maintaining the RFC Connections (Transaction SM59)
    1. Log on to your SAP Exchange Infrastructure central instance host.
    2. Call transaction SM59.
    3. Choose Create.
    4. Enter at least the following:
    RFC destination: AI_RUNTIME_JCOSERVER
    Connection type: T
    Description: <your description>
    5. Choose ENTER
    6. Choose the tab Technical settings and do the following:
    a. Select Registered Server Program
    b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
    c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
    a. On the Integration Server host, call transaction SMGW
    b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
    7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
    8. Save your settings.
    9. Repeat the steps 3 u2013 8 for the remaining destinations:
    Destination
    Values
    AI_DIRECTORY_JCOSERVER
    Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
    LCRSAPRFC
    Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
    SAPSLDAPI
    Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
    10. Leave the transaction SM59 open for later tests.
    J2EE Configuration for the Destinations (Visual Administrator)
    1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
    2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
    3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
    4. In the section Repository, do the following:
    a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
    b. For User and Password maintain the login parameters for the user SAPJSF.
    c. Select the flag Unicode.
    6. Choose Set.
    7. Repeat the steps 3 u2013 6 for the remaining destinations:
    Destination
    Values
    AI_DIRECTORY_JCOSERVER
    u2022 Corresponding values from SM59
    u2022 Number of processes: 10
    LCRSAPRFC
    u2022 Corresponding values from SM59
    u2022 Number of processes: 3
    SAPSLDAPI
    u2022 Corresponding values from SM59
    u2022 Number of processes: 3
    Testing the RFC Destination
    After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
    1. Call transaction SM59 again.
    2. Open your RFC destination.
    3. Choose Test Connection. No error should be displayed.
    This will solve your problem.
    Thanks
    Laxmi Bhushan

  • RFC connection error (VPN-access)

    Hi!
    I have the following error for the RFC connection:
    The RFC connection is setup as follows.
    /H/10.101.7.1/S/3299/H/10.151.6.194
    10.101.7.1 = IP of our SAP Router
    10.151.6.194 = IP of customer system
    The RFC connection is established:
    SAP Router (intern) --> Target systems
    The error is:
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: partner not reached (host 10.151.6.194, service sapgw20)
    Error Details     LOCATION: SAP-Gateway on host bksapp01 / sapgw20
    Error Details     DETAIL: NiPConnect2
    Error Details     CALL: SiPeekPendConn
    Error Details     COMPONENT: NI (network interface)
    Error Details     COUNTER: 592
    Error Details     ERROR NUMBER: 10060
    Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
    Error Details     MODULE: nixxi.cpp
    Error Details     LINE: 8777
    Error Details     RETURN CODE: -10
    Error Details     SUBRC: 0
    Error Details     RELEASE: 640
    Error Details     TIME: Thu Jun 19 10:42:42 2008
    Error Details     VERSION: 37
    Can some one help to solve the problem?
    Thank you very much
    Thom

    Hi
    Change the saprouter string to
    /H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
    and try !!!

  • RFC connection error when registering PROGRAM ID.

    Hi,
    I created a RFC connection of type T.
    I gave the following parameters ->
    gateway host: hostname and then ip-address
    gateway service: sapgwxx
    Registered program id: xxx
    It is giving me the following error:
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program sapgwxx not registered
    Error Details     LOCATION: SAP-Gateway on host <hostname> / sapgwxx
    Error Details     DETAIL: TP sapgwxx not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 2696
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1777
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Can anyone help me in troubleshooting the issue.
    Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
    Points to be rewarded for any kind of small help.

    Thanks Ramesh.
    I followed the blog. Here are the steps that I did.
    RFC destination:
    1. To create the RFC go to TCODE: SM59  <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
    3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
    4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
    5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
    But still I face the same problem. It get the following error:
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program <SID name> not registered
    Error Details     LOCATION: SAP-Gateway on host xxxxx / sapgwxx
    Error Details     DETAIL: TP <SID Name> not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 2719
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1777
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Thu Nov  1 10:39:43 2007
    Error Details     VERSION: 2
    Kindly help me out.

  • RFC Connection Error during Web AS ABAP Database Instance

    I keep getting RFC Connection error installing the database instance.  The following are the pertinent logs:
    INFO 2007-05-09 20:10:04
    Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
    INFO 2007-05-09 20:10:04
    Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
    INFO 2007-05-09 20:10:22
    Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
    INFO 2007-05-09 20:12:23
    RFC parameter CLIENT set to value 000.
    INFO 2007-05-09 20:12:23
    RFC parameter USER set to value DDIC.
    INFO 2007-05-09 20:12:23
    RFC parameter LCHECK set to value 1.
    INFO 2007-05-09 20:12:23
    RFC parameter PCS set to value 1.
    INFO 2007-05-09 20:12:23
    RFC parameter LANG set to value EN.
    INFO 2007-05-09 20:12:23
    RFC parameter ASHOST set to value cix22.
    INFO 2007-05-09 20:12:23
    RFC parameter SYSNR set to value 00.
    INFO 2007-05-09 20:12:23
    RFC connection information checked successfully.
    ERROR 2007-05-09 20:12:24
    FRF-00007  Unable to open RFC connection.
    I tried the following fixes spread across different threads in this Expert Forums:
    1. Someone said network problem.  I rebooted, restarted the install and even redo it. 
    2.  Another suggestion was to use caps on the password.  Didnt work.
    3.  One suggestion was to update the keydb.xml file.  However, I could find such property name:
    search for the table t_SAPComponent_SAPSystemLogon_SHARED
    then look for <fld name="pPW">, <properties>,
    <property name ="GUIENG_USER_INPUT" and set the value
    "GUINEG_TRUE" to "GUIENG_FALSE".
    4. I even used the ddic password 19920706 which is supposed to be the default.
    5. Restarted the instance and applied all the fixes above.
    Does anyone know what is going on base on the logs above?  Thanks.

    try moving all your install disk onto local file system then rerun the install. That might work....

  • Report Painter GR214 generation error - Short dump 4.6C

    While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to  "MESSAGE_TYPE_X"                                          
    "%_T01JR0 " or "########################################" 
    "INSERT_ROW_FORMULA_NEW"                                  
    Any leads to fix this?
    The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

    Hi,
    The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
    In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
    When there are more than 30 variables in a report, please have a look at the note 332091.
    Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
    definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
    regards
    Waman

  • Smartform report generation error

    Hi,
    I have a problem with a report calling a smartform. The report works perfectly on the 1 system but on the other system there is a generation error. I found that the problem lies with the following declaration:
    data: otf_info type SSFCRESCL. 
    I compared the structures on the different systems and they are identical. The only difference is the Support Package levels. The error occurs on the system with the higher support package - SAPKB64015 (basis and aba) whereas the other system is still at level 12 (SAPKB64012).
    Any ideas what is causing the generation error and what could be done to fix it?
    Regards
    Liza-Marie

    Hi ,
    I think there may be some errors in function group errors.
    Try the following :
    T/Code : SMARTFORMSEnter the name of the form> Test--> This will leads to function module --> Utilities(Menubar)-=-> Repair function group --> Repair.
    After repairing the function group --> Save and Activate.
    Then transport the Smartform to other system .
    Regards,
    Lanka

  • (Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitestwar,
    Try these notes as well
    1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
    1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
    1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
    You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
    Or try to set logs on the server and check what is happening.
    Thanks,
    Vivek

  • SID generation error

    Hi All,
    I am loading data for Sales Item for this i have enhanced the DataSource. Now while i am loading the data to DSO it is giving error while activating the DSO--SID generation error as it found some hex. values.
    To overcome this i tried with TOUPPER formula for that field but still it is giving error. So i have removed unchecked the check box 'SID generation upon activation' as i am not going to use this DSO for reporting.
    But i am transferring data to InfoCube where again it is giving the same error.
    Kindly help me out to overcome this error.

    Hi
    Always Load Master Data before Transaction data to get rid of SID Generation Error.
    And Hex Values FM -- CHAR_HEX_CONVERSION.
    http://help.sap.com/saphelp_nw70/helpdata/EN/48/b4e431c0ca11d2a97100a0c9449261/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/25/73725c700511d3aa40006094b92fad/frameset.htm
    Re: How-to convert a character to its hex value?
    Hope it helps

  • Getting a sid's generation error while activating  DSO

    Dear All,
    We are created a standard dso on top of generic data source. This data source is created on top CDHDR and CDPOS tables through function module.
    While acting the DSO , We are getting a sid generation error.
    Please let me know the process to resolve the issue or tell me any other alternative solution is available to overcome this situation.
    Thanks
    Regards,
    Sai.K

    Dear All,
    Thanks for your prompt response and please find the below attachment.Here , the info object fetches some hexa decimal values due to that it got failed.
    Please let me know solution to overcome the this error.
    Thanks
    Regards,
    Sai.k

  • Generation Error - when trying to publish a Java web service

    Hi All,
    I keep getting the following Generation Error -- java.util.NoSuchElementException_ when I'm trying to create a Java Web Service using the jdeveloper wizard.
    I have 2 entities and 2 stateless session beans acting as their facades. One entity has a One-One(FK) relationship with the other entity. I test out the entities and session beans using the test client and the OC4J embedded container and everything seems to work. When I try to generate a Java WebService from one of the entities I keep getting the "Generation Error". Could someone please provide me with some insight into why I'm facing this problem, because it seemed fine when I published J2EE web services previously and now this happens and I cant seem to publish web services anymore. Everytime I keep getting the same GenerationError. Thanks in advance.

    Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Maybe you are looking for