Rfc Jco communication channel error in BPM integration process

Hi,
when we are processing the records some records are processed succussfully some records does not in integration process view. when we restart the workflow we can able to process the error messages succussfully.
but here not understanding how to reprocesse automatically error messages in the BPM integration process level.
thanks and regads,
krushi.

Hi
re-submission of messages after corrections that were failed
Reconciliation of Messages in BPM
Reconciliation of Messages in BPM Contd. - Restart Workflow

Similar Messages

XI Communication Channel Error Explanation

Hi All,
Does anyone happen to know :-
1) Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
2) Are these messages stored in a table I can check
The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display. Since the process runs early hours of the morning we never get to see these messages.
Any help appreciated.
Thanks
Craig

Hi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM

JDBC to JDBC Scenario - Communications Channel Error

I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed Culnane

Hi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini

Intermittent problems with a RFC receiver communication channel.

Hello.
I want to know how to get the total channel history for a RFC receiver communication channel (in RWB only last 5 calls are available).
We use this communication channel in a java mapping to run a RFC of the abap engine of XI. Sometimes the rfc doesn't work and mapping throws a mapping transformation exception. Then, without a modification, we reprocess the message in SXMB_MONI and it is processed without errors. We think that it could be caused by a huge message volume.
How can I get the maximum number of rfc calls that the rfc communication channel can admit simultaneously. Which parameters have influence in these calls?
Thank you very much.
Alberto.

1. Increase the maximum connections
from help.sap.com
Additional Parameters
Parameter ~~~~ Entry
Maximum Connections ~~ Maximum possible number of initial connections required between adapter and sender system. This value is limited internally to a maximum of 50.
2. /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue

Getting end-of-file on communication channel error on this query

Hi guys,
I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;

Hi Daniel,
Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks!

Sender Soap Adapter communication channel error

Dear Experts,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
"Processing Errors in the Last 50 Minutes"
Thanx in advance

Aamir,
My other interface is working fine by giving the following url:
http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
I am not using the propsed url.
Moreover when i try to give this url in the browser . It is asking of user id and password.
I am giving user as : PIAPPLUSER.It gives message servelet is ok.
In my communication channel monitoring the corresponsing communication channel:
RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
Error meesage in Webclient:
java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

ORA-03113: end-of-file on communication channel ERROR

After applying Database patch 3095277 to my 9.2.0.1.0 installation
in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
I've even tried creating a new test database but the result is the same.
The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
ERROR at line 1:
ORA-03114: not connected to ORACLE
I would be grateful of any pointers as to how to resolve this problem.
Regards
Gary.

Chris, Thanks for the suggestion,
I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
This is only a test database so there's no great loss if
I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
Regards
Gary.
Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
Wed Sep 17 16:25:14 2003
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Instance name: test01
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 2556, image: ORACLE.EXE
*** 2003-09-17 16:25:14.046
*** SESSION ID:(7.17) 2003-09-17 16:25:14.031
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** 2003-09-17 16:25:14.281
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
Current SQL statement for this session:
select 1
from resource_view
where any_path = '/xdbconfig.xml'
----- PL/SQL Call Stack -----
object line object
handle number name
6A4FA348 6 package body XDB.DBMS_REGXDB
6A504D88 1 anonymous block
6A576AB8 639 package body SYS.DBMS_REGISTRY
6A1DBB6C 1 anonymous block

AS2 Reciver Communication Channel error

Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
Thanks

Hi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant

End of communication channel error

While working with our application developed in VB, In some times when I use describe command in sql * plus, giving "end of communication channel error" and getting disconnected from the database. Select and other DML commands are working well.
Any suggestions please...
Thanks in advance....
UMAMAHESWARA REDDY

Check the alert log and with your network people for any errors.

Communication Channel Errors to be monitored in CCMS

Hi,
We have set up CCMS Monitoring templates for PI monitoring. We have a business requirment to send communication channel errors to the IT team via CCMS
We have configured ALERTCATEGORIES and defined alert rules. The communication channel errors result in alerts. These alert categories are visible under the CCMS PI monitoring template.
What is not getting transmitted is the alert long and short text in CCMS.
is there any way to achieve this?
Please point to how to guide or blogs for the same.
Thanks
Abhishek

Hi Amit...
Check the error i got when communication channel is red...
till now it was working fine.......i tested with a file which has unproper mapping ..and sent it....it gave an error...with mapping exception..(Please do remember..before i sent unproper XML....commmunication channel was green)
it often happen when i use unproper XML......
here is the messages it says
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '/102' too long (>1 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'
Edited by: Harsha reddy on Jun 20, 2008 10:01 PM

Communication channels error during update

Hello,
All the Communication channels of the XI QA system are showing a status "Error during Update" Checked status of components in Runtime Workbench --> Component Monitoring. Red Alert on Adapter Engine The details of the Communication channel error below is:
com.sap.aii.af.service.administration.api.AdminException: Unable to
retrieve channel runtime status: EventException:
com.sap.engine.frame.cluster.message.PartialResponseException: One or
more of the destinations did not return a response. Response status:
[303228750-RTOE,303228751-RTOE,303981451-OK].
Has anyone encountered this before? Do you have any suggestions on where to look at to investigate on the cause of the problem?
Thanks in advance.
Regina

Hi Regina,
ask your basis guys to see the startup log of XI QA...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
Thanks,
Rajeev Gupta

End-of-communication channel error from client

In my server oracle(oracle9i enterprices edition) is working fine but from client side i'm getting the following error
*end-of-communication channel error
But my network is working fine
anyone can you give me the solution for this problem....?
Message was edited by:
user497084

checkout TNSPING <service name> from cmd prompt
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\NJi>tnsping issl
TNS Ping Utility for 32-bit Windows: Version 2.3.2.1.0 - Production on 25-OCT-06
14:36:06
Copyright , 1996(c) Oracle Corporation 1995. All rights reserved.
Attempting to contact (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=198.1.2.
15)(Port=1521))
OK (100 msec)

End of communication channel error on second execution

a select view over a database link will return results once but on second execution returns end of communication channel error.
i have lots of other views working fine this way. the problem view did work but has started failing. .
running the view on the database which is running the htmldb application in a sqlplus session (which is the same schema which htmldb is using for the application) works fine. it is only htmldb which is showing the problem both from within the application and the sql workshop

Hi,
For a 'serious' error like that you will probably want to work with Oracle support who will be able to work with you to resolve the problem.

Encounter "ORA-03113 : end-of-file on communication channel error "

Hi experts :
I schedule a job of MS SSIS(SQL 2005) to do data transfer from Oracle to MS sql server every morning. Few days ago, SQL server report an error as bellow
錯誤: 2010-05-26 06:04:27.87
代碼: 0xC0202009
來源: Package 連接管理員 "pro.twacelifeapp"
描述: 發生 OLE DB 錯誤。錯誤碼: 0x80004005。
有 OLE DB 記錄可用。來源: "OraOLEDB" Hresult: 0x80004005 描述: "ORA-03113 : end-of-file on communication channel error"。
錯誤結束
"ORA-03113 : end-of-file on communication channel error " happened.
many times It makes SSIS interupt. And the wierd thing is, as I restart SSIS again. Then the process done successfully.
I check Oracle alert.log at the event time, it report "inbound connection timed out (ORA-3136)".
sqlnet.log also list "TNS-12535: TNS:operation timed out".
from the day on, MS SQL server reported this error msg everyday.
I'm really confused and can't find the result of cause.
dose any helps ,thanks~
SQL server version : SQL server 2005
Oracle : Oracle 10g r2

ORA-03113: end-of-file on communication channel
Cause: The connection between Client and Server process was broken.
Action: There was a communication error that requires further investigation. First, check for network problems and review the SQL*Net setup. Also, look in the alert.log file for any errors. Finally, test to see whether the server process is dead and whether a trace file was generated at failure time.
Regarda
Asif Kabir

Oracle ORA-03113: end-of-file on communication channel error

Hi,
I am new to oracle. I need your help.
I got oracle error on client site while running SQL.
Oracle ORA-03113: end-of-file on communication channel error
Process ID: 18805
Session ID : 1610 Serial number: 15367I looked alert.log which is given below
Fri Apr 02 14:36:27 2010
Thread 1 advanced to log sequence 34069
Current log# 1 seq# 34069 mem# 0: +DATA/store/onlinelog/group_1.272.648383369
Fri Apr 02 15:10:11 2010
Trace dumping is performing id=[cdmp_20100402151011]
Fri Apr 02 15:10:41 2010
Reconfiguration started (old inc 40, new inc 42)
List of nodes:
0
Global Resource Directory frozen
* dead instance detected - domain 0 invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Fri Apr 02 15:10:41 2010
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Fri Apr 02 15:10:41 2010
LMS 1: 2 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
LMS 1: 13458 GCS shadows traversed, 0 replayed
LMS 0: 13700 GCS shadows traversed, 0 replayed
Submitted all GCS remote-cache requests
Fix write in gcs resources
Fri Apr 02 15:10:42 2010
Instance recovery: looking for dead threads
Beginning instance recovery of 1 threads
Reconfiguration complete
parallel recovery started with 3 processes
Started redo scan
Completed redo scan
1148 redo blocks read, 100 data blocks need recovery
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc:
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc:
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc:
Started redo application at
Thread 2: logseq 16481, block 37508
Recovery of Online Redo Log: Thread 2 Group 3 Seq 16481 Reading mem 0
Mem# 0: +DATA/store/onlinelog/group_3.280.648386385
Completed redo application
Completed instance recovery at
Thread 2: logseq 16481, block 38656, scn 44063421381
87 data blocks read, 101 data blocks written, 1148 redo blocks read
Switch log for thread 2 to sequence 16482
Fri Apr 02 15:10:50 2010
ARC3: Archiving disabled thread 2 sequence 16482
Fri Apr 02 15:13:50 2010
Reconfiguration started (old inc 42, new inc 44)
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Fri Apr 02 15:13:50 2010
Fri Apr 02 15:13:50 2010
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
LMS 0: 7881 GCS shadows traversed, 4001 replayed
LMS 1: 8015 GCS shadows traversed, 4001 replayed
LMS 1: 5437 GCS shadows traversed, 2737 replayed
LMS 0: 5797 GCS shadows traversed, 2941 replayed
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration completeHere is trace files
cat *STORE1_p001_31604.trc*
Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /opt/oracle/product/11.1/db_1
System name:    Linux
Node name:      datastore1.bakcell.com
Release:        2.6.18-53.el5PAE
Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
Machine:        i686
Instance name: STORE1
Redo thread mounted by this instance: 1
Oracle process number: 83
Unix process pid: 31604, image: [email protected] (P001)
*** 2010-04-02 15:10:43.094
*** SESSION ID:(1576.36581) 2010-04-02 15:10:43.094
*** CLIENT ID:() 2010-04-02 15:10:43.094
*** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.094
*** MODULE NAME:() 2010-04-02 15:10:43.094
*** ACTION NAME:() 2010-04-02 15:10:43.094
2010-04-02 15:10:43.093954 : Start recovery for domain=0, valid=0, flags=0x1
*** 2010-04-02 15:10:44.868
KCRP: blocks claimed = 34, eliminated = 6
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 40/40 = 1.0
Max compares per lookup = 0
Avg compares per lookup = 0/40 = 0.0
*** 2010-04-02 15:10:50.249
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 40/40 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 604/604 = 1.0
cat *STORE1_p000_31602.trc*
Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /opt/oracle/product/11.1/db_1
System name:    Linux
Node name:      datastore1.bakcell.com
Release:        2.6.18-53.el5PAE
Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
Machine:        i686
Instance name: STORE1
Redo thread mounted by this instance: 1
Oracle process number: 71
Unix process pid: 31602, image: [email protected] (P000)
*** 2010-04-02 15:10:43.094
*** SESSION ID:(1565.49022) 2010-04-02 15:10:43.094
*** CLIENT ID:() 2010-04-02 15:10:43.094
*** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.094
*** MODULE NAME:() 2010-04-02 15:10:43.094
*** ACTION NAME:() 2010-04-02 15:10:43.094
2010-04-02 15:10:43.093855 : Start recovery for domain=0, valid=0, flags=0x1
*** 2010-04-02 15:10:44.433
KCRP: blocks claimed = 30, eliminated = 4
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 34/34 = 1.0
Max compares per lookup = 0
Avg compares per lookup = 0/34 = 0.0
*** 2010-04-02 15:10:50.246
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 34/34 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 666/666 = 1.0
cat *STORE1_p002_31619.trc*
Trace file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /opt/oracle/product/11.1/db_1
System name:    Linux
Node name:      datastore1.bakcell.com
Release:        2.6.18-53.el5PAE
Version:        #1 SMP Sat Nov 10 18:33:42 EST 2007
Machine:        i686
Instance name: STORE1
Redo thread mounted by this instance: 1
Oracle process number: 84
Unix process pid: 31619, image: [email protected] (P002)
*** 2010-04-02 15:10:43.095
*** SESSION ID:(1578.22258) 2010-04-02 15:10:43.095
*** CLIENT ID:() 2010-04-02 15:10:43.095
*** SERVICE NAME:(SYS$BACKGROUND) 2010-04-02 15:10:43.095
*** MODULE NAME:() 2010-04-02 15:10:43.095
*** ACTION NAME:() 2010-04-02 15:10:43.095
2010-04-02 15:10:43.095010 : Start recovery for domain=0, valid=0, flags=0x1
*** 2010-04-02 15:10:44.551
KCRP: blocks claimed = 25, eliminated = 1
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 26/26 = 1.0
Max compares per lookup = 0
Avg compares per lookup = 0/26 = 0.0
*** 2010-04-02 15:10:50.250
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 26/26 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 246/246 = 1.0
----------------------------------------------I don't understand what does it mean which is written in alert.log.
Yhanks in advance.

please check below files:
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p001_31604.trc:
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p000_31602.trc:
Fri Apr 02 15:10:43 2010
Errors in file /opt/oracle/diag/rdbms/store/STORE1/trace/STORE1_p002_31619.trc:
Edited by: Prathmesh on Apr 2, 2010 5:01 PM

Rfc Jco communication channel error in BPM integration process

Similar Messages

Maybe you are looking for