Rfc log on failed user SAPSYS
Hi,
We are getting below alerts
RFC/CPIC logon failed Reason=24 Type=R
client:000
user:SAPSYS
Also
RFC/CPIC logon failed Reason=1 Type=S
client:000
user:SAPSYS
what is the diff between these two alerts and what is the reason for getting this.
Regards,
ARNS.
Thank you too much Rob,
But I am not able to find the answer for my case.
What I understod from the post is:
for using LDAP authentication for ciscopca, we will have to import users
from LDAP integration.
For me I do not care ( I just need to login, whether I used CUCM passwords , AD or Local I jsut need to login in any method )
but the actual scenrio is both CUCM nad CUC are integrated with LDAP and I IMPORT USERS FROM LDAP. I belive that I have problem with authintication throw LDAP ( I am not sure)
Is there any way to login using Local Passwords I do not need LDAP.
and what I should tupe to login shall I add the domain to username or no? In unity there is a feiled to enter the domain, what about Connection??
Similar Messages
-
Failed to activate authorization check for user SAPSYS
Hi Experts
I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
i am getting a error Failed to activate authorization check for user SAPSYS.
Please help me to solve this issue.
Regards
VenkatHi, Mr. Joe Bo.
Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
Basis Patch - 15, Kernel 159
I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
Thanks & Regards
Venkatesan J -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
the log on. User profile can not be loaded."
I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
The
"Do not logon users with temporary profiles" Group Policy setting is not configured.
And I have tried force replication too.
I have exhausted all my knowledge.
Please help
Regards
PhilIt might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
MSI file installation fails on computers with logged-in restricted users
I'm trying to package Flash Player 8b for silent distribution
via Microsoft SMS. My package works correctly on computers where a
logged in user is either a local Administrator or Power user, but
fails with an error on computers where the logged in user has no
such rights. The SMS package is set to install with administrative
rights. The computers are Windows 2000 SP4 and Windows XP SP2
workstations. I only have the problem with Windows XP SP2, but
those computers are the only ones without priviledged users. I've
confirmed that computers with logged-in administrative users work
properly, like my own Windows XP machine.
The installer I'm using is
"install_flash_player_active_x.msi" and the version is "8,0,24,0".
The digital signature is dated "Friday, March 31, 2006 12:45:10
PM". I am led by other posts to believe that this is the most
current version and that I shouldn't be having these problems with
it.
The error that is reported in the log files is:
1: ISMsiServerStartup Failure, Failed to Initialize script
support, Error = 0x80070006
I'm using a Visual Basic script in my SMS package. It
attempts to run the "uninstall_flash_player.exe" uninstaller to
remove old versions, then tries to run the installer. It uses the
following command line:
install_flash_player_active_x.msi /log
%systemroot%\temp\flash_msi.log /qn allusers=2
reboot=reallysuppress
Originally I did not include the "allusers=2
reboot=reallysuppress", but I was having another error and various
Macrovision and InstallShield support sites suggested that addition
as a fix. That error was "Internal error 2103. 26".
Any ideas? Should this really be so hard to package and
distribute?I did find a solution to this odd problem. It does seem to be
a dcom priveledges issue. I suspect the reason it isn't seen on
pre-sp2 is because Microsoft made some changes to post xp-sp2 to
tighten security. So ISSCript is called via dcom. Installsheilds
default runas is "Interactive User" somewhere between SMS client
running as user with admin rights causes this to break. I found
that if you remove the runas string it will execute in whatever
security context the program that called is running in. Since the
SMS client has full control of the machine it works. I've attached
a script that basically makes an array of dcom appid using wmi,
removes the ones that don't have the column "InstallShield
InstallDriver" in them - store those in a an array then remove the
runas line from each. I actually found this script on the
InstallShield site - I left the credits intact
- however I've already thought of a few ways to
improve on this script.
The other problem is that Flash Player 8 installs the
InstallSheild Driver version 10 on launch - which effectively
restores the runas string. So I found there's a custom action
called "EngineStartup.4F635B62_07BF_4779_B74E_D80C29D508E3" - to
disable this I simply made a transform and removed this row in the
InstallExecuteSequence table. Then it all works
Keep in mind - if your target machines do not have Install
Shield Driver 10 on them you'll need to install that in your script
before installing Flash Player 10. To do this make a transform for
isscript10.msi and remove the Registry601 row - so it does not
create the runas key on install.
Or... You could just do the install as system
- and forget this whole thing ever happened. -
After Upgrading from SCCM 2012 Sp1 to SCCM 2012 R2 we are getting following error:
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteraopServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
An error has occurred during report processing.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteropServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)HI,
Check the SQL Reporting services account that is used, the one that you supplied when setting up the SQL Reporting Services point in the Configuration Manager 2012 console, it seems to be locked out.
I believe it has been asked once before on the forums as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
EWA Configuration... DUMPS... user SAPSYS
Hi,
I have setup the EWA report to my sandbox. Report is generating fine. I did all the setup from my own user which has S_RFC, S_RFCACL, & S_TCODE Objects. I have SAP_ALL Authorization. Everything is working fine. sandbox is generating early watch reports fine. But the problem is I am getting DUMPS in my Sandbox everyhour in 33 mins... and its dumping sooo many times. I had 147 dumps yesterday. Here is the Dump Log (ST22)
User "SAPSYS" has no RFC authorization for function group "SCUST_SYS_INFO ".
What happened?
The user "SAPSYS" attempted to execute a function module from
the function group "SCUST_SYS_INFO ", but does not have the appropriate
RFC authorization.
Error in ABAP application program.
The current ABAP program "SAPLSCUST_SYS_INFO" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The user "SAPSYS" has no RFC authorization for the function group
"SCUST_SYS_INFO ". Please contact your system administrator to give you
the RFC authorization for the required function groups (e.g. "SCUST_SYS_INFO
The RFC authorization object is S_RFC.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
Now i dont understand that from where this user came up SAPSYS in client 000... and we dont use client 000. strickly not allowed. I didnt use this user when generating RFS's.... Everything I did using my own user.
Please help ASAP. it is very critical...
Thanks,
Points will be posted for sure!!!Hi,
Those are the following RFC's I am using;
In Solman: SM_XXXCLNTXXX_READ- user: Blank
SM_XXXCLNTXXX_TMW - user: Blank
SM_XXXCLNTXXX_TRUSTED - user: RFC-it has all the other rfc permissions as well as the you've provided me.
In CRM: SM_XXXCLNTXXX_BACK - user: SOLMANXXX
SM_XXXCLNTXXX_TRUSTED- user: checked on Current user
Please currect me if I am wrong. I think In solution manager, the user for xxxREAD should be SOLMANSMP001 which is standard under my other system when I go to sm59..
and for XXX_TMW, I should have user: SOLTMWSMP001...
Please correct me If I am wrong.
Thanks, I really appreciate your help -
Hi,
we are trying to upgrade our CRM 7.0 to the EhP1 and the EhP1 installer is blocked with the error:
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: RFC call to SUBST_START_REPORT_IN_BATCH failed with key RFC_ERROR_SYSTEM_FAILURE (SYSTEM_FAILURE): connection closed without message (CM_NO_DATA_RECEIVED)
Log files report the following errors:
(altntfi.sav)
#---- MASKING file ALTNTFI.LOG from G:\usr\sap\CR7\EHPI\abap\log
#---- TIME: 20111125115607 PHASE: ALTNTAB_FILL
1 ETQ201 Entering upgrade-phase "ALTNTAB_FILL" ("20111125111509")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPSR4
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/ALTNTAB_FILL'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = '30'
2 ETQ399 Arg[1] = 'ALTNTFI.ELG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '07', GwService = 'sapgw07'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ010 Date & Time: 20111125111509
4 ETQ265 Starting report "RDDNT2MT" with variant "SAP_INIT" in batch
4 ETQ359 RFC Login to: System="CR7", Nr="07", GwHost="SYSKCRMDEV1", GwService="sapgw07"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
2EETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
2EETQ361 code/exception : SYSTEM_FAILURE
2EETQ362 key : RFC_ERROR_SYSTEM_FAILURE
2EETQ364 message :
2EETQ399 connection closed without message (CM_NO_DATA_RECEIVED)
4 ETQ359 RFC Login to: System="CR7", Nr="07", GwHost="SYSKCRMDEV1", GwService="sapgw07"
4 ETQ232 RFC Login succeeded
2EETG894 Exception "SYSTEM_FAILURE" raised, write variant failed with error code -1
2EETG890 Exception "SYSTEM_FAILURE" raised, job scheduling failed with error code -1
2EETQ261 Start of batchjob "RDDNT2MT" failed
4 ETQ010 Date & Time: 20111125111548
We have logged through GUI to the shadow instance but we can't test the function module SUBST_START_REPORT_IN_BATCH: the shadow instance continuously dumps (in SE37, ST22, ST11, SU01... with dumps LOAD_PROGRAM_CLASS_MISMATCH, GETWA_WRONG_LENGTH, LOAD_TYPE_VERSION_MISMATCH...). When I don't have a dump (i.e. I try to activate the function module in SE37 without opening it), the GUI closes with the error: "Work process restarted, session terminated " and in the logfile dev_disp shows me:
Fri Nov 25 11:15:30 2011
*** ERROR => DpHdlDeadWp: W5 (pid 17996) died (severity=0, status=0) [dpxxwp.c 1522]
Any help would be greatly appreciated.
Thanks,
DavideHi Davide,
Please try out below mentioned steps
Set the USER Environment Variable u2018auth_shadow_upgradeu2019 to u20181u2019 for the <SID>adm user (set the variable while logged in as that user)
Change the Shadow Instance service to run with the <SID>adm account
Stop the Shadow Instance (you can leave the Central and SCS Instances running)
Start the Shadow Instance
Continue the EHPI process from where it left off
Hope this helps.
Regards,
Deepak Kori -
RFC_NO_AUTHORITY error for user SAPSYS in client 000
Hi
I have a lot of abap dumps in ST22 RFC_NO_AUTHORITY error for user SAPSYS in client 000 for today which I'm not sure what they mean. I don't have a SAPSYS user in client 000.
The reason that I'm concerend is we had an incident with the SAP server last night where it became unresponsive about 2.30 am and had to be manually rebooted this morning. The R3 jobs all ran OK but the BW loads failed and had to be re-run this morning. There were no unusual jobs or programs running last night and the Server Event Log does not contain any further information as to the probable cause of the problem.
I'm not sure if this error is related to the BW jobs running and was wondering did anyone come accross it and what it means.
Thanks
SiobhanCheck notes 944615 and 93254.
Rich -
Error: RFC of "Spda_conflict_check" failed during configuration roadmap
We are facing problem during implementation of EHP4 on IDES ERP 6.0/NW7.0 on oracle 10.2 during the configuration roadmap.
We are using the SAPEHPi with SP level 20.
The pahse PREP_EXTENSION/CONFLICT_CHECK terminates with the error
Error : RFC of "Spda_conflict_check" failed
key : RFC_ERROR_SYSTEM_FAILURE
MESSAGE: Time Limit Exceeded.
After checking the RFC trace we have made changes in the RFC
destination "SERVER_EXEC"(Starts Program 'RFCEXEC' on Application
Server) and made the necessary changes by giving the path to the
program "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec" and
providing the hostname where EHP4 installation is going on and test
connection was ok.
Another RFC Destination "EPS_CLIENT" (Electronic Parcel Service: R/3 <-
> EPS Client Communication) is not able to connect. we have provided
the target host and doesnot made any changes to program entry
i,e "/bas/BIN/gen/dbg/hp/epc".RFC conncetion is getting failed.
What is this program does in system "/bas/BIN/gen/dbg/hp/epc".?
log file of dev_rfc1
Trace file opened at 20090706 134701 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: RANGUPTA (Client: 800)
Destination: SERVER_EXEC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =SERVER_EXEC
HOST =iwdfim01
PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
Trace file opened at 20090706 135428 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: RANGUPTA (Client: 800)
Destination: EPS_CLIENT (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =EPS_CLIENT
HOST =q4de3gsy207
PROG =/bas/BIN/gen/dbg/hp/epc
GWHOST =hs0305
GWSERV =sapgw95
Trace file opened at 20090707 104841 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLCRFC (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 3, 58623496, {EAD26ADE-05F0-F12A-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
Trace file opened at 20090707 105909 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 2, 59247771, {5DD46ADE-47D5-F1FE-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
Trace file opened at 20090707 110453 W. Europe Daylight Time, SAP-REL 700,0,144 RFC-VER U 3 957098 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: RANGUPTA (Client: 001)
Destination: EPS_CLIENT (handle: 2, 59602149, {2CD56ADE-0BA0-F100-89D5-005056955BE2})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817Hi,
No i am not running SAPEHPI from remote host. it is a local installation. ERP6.0(IE1) is an IDES system with EHP3.
During the Conflict_check phase installer programme accesses RFC Destination "SERVER_EXEC" and "EPS_CLIENT".
SERVER_EXEC had some wierd entry.
Destination: SERVER_EXEC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =SERVER_EXEC
HOST =iwdfim01
PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec
SERVER_EXEC had different path of the program rfcexec "PROG =/usr/sap/T3A/SYS/exe/run/rfcsdk/bin/rfcexec" and i changed it to "/usr/sap/IE1/SYS/exe/uc/NTAMD64/rfcsdk/bin/rfcexec". after this RFC was working fine but the conflict _check again failed with the same error.
This time RFC EPS_CLIENT had errors:
Destination: EPS_CLIENT (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=19 thRc=497
Unable to determine host address: NiHostToAddr failed
DEST =EPS_CLIENT
HOST =q4de3gsy207
PROG =/bas/BIN/gen/dbg/hp/epc
GWHOST =hs0305
GWSERV =sapgw95
so i changed the GWHOST to q4de3gsy207 and GWSERVER: sapgw00.
what this program does =/bas/BIN/gen/dbg/hp/epc
the test connection fails
but the problem persists.
i dont know from where it is accessing the hostname :iwdfim01
Edited by: Ranjeet Gupta on Jul 7, 2009 5:21 PM -
Abt RFC & FTP---- RFC to SAPFTP failed (urgent)
Hi all,
my program is working fine when i execute it in SAP GUI.
in this program i need to send some local file to FTP server from presentation server.
actually we have a scanner through which we can scan the barcode data from barcode label.this scanner is connected to sap test server through web console.
so ,i can see the sap screen on the screen of scanner for this perticular transaction.
after scanning a barcode,the barcode data comes to scanner.when i execute this report on the scanner, it is showing the error---- RFC to SAPFTP failed.
where as this same report is working very fine on the SAP server.it can send my file from presentation server to FTP server located at some other place.
web console is installed so i can connect scanner to SAP for this perticular transaction through web.i think, to execute on scanner is same as execute on sap server.
This error comes while executing a Function module FTP_CONNECT which is present in my program.
can u please tell where is the problem?it is very urgent as they need in 1 day of time.
code is as follows.
FORM ftp_send using printer dir.
data: user(64) type c value 'man',
pwd(64) type c value 'post',
host(64) type c value '172.160.122.30',
cmd1(80) type c ,
cmd2(150) type c ,
cmd3(80) type c ,
dest like rfcdes-rfcdest value 'SAPFTP',
compress type c value 'N'.
data: hdl type i,
key type i value 26101957,
dstlen type i.
data: begin of result occurs 0,
line(100) type c,
end of result.
data:begin of tab_oline occurs 0,
oline(200) type c,
end of tab_oline.
describe field pwd length dstlen.
LOOP AT bt.
CLEAR tab_oline.
CONCATENATE
bt-userid
bt-zdate
bt-seq
bt-charg
bt-batch
bt-matnr
bt-menge
bt-lgpla
bt-lifnr
bt-lot_code
bt-date_code
bt-lead_nolead
INTO tab_oline-oline SEPARATED BY ','.
append tab_oline.
endloop.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = 'c:\pabi29.txt '
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = tab_oline.
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear tab_oline.
refresh tab_oline.
call 'AB_RFC_X_SCRAMBLE_STRING'
id 'SOURCE' field pwd id 'KEY' field key
id 'SCR' field 'X' id 'DESTINATION' field pwd
id 'DSTLEN' field dstlen.
**Set FTP File Paths
call function 'FTP_CONNECT'
exporting
user = user
password = pwd
host = host
rfc_destination = dest
importing
handle = hdl.
if sy-subrc ne 0.
message e020 with 'RFC connection failed'.
endif.
DATA: zfilename(150) TYPE c,
zfilename2(150) TYPE c.
printer(5) TYPE c." value 'P0001'.
CONSTANTS: dir(50) TYPE c VALUE '\SAPuser\SAPfolder\'.
DATA: dir(50) type c.
select single pfolder from zkt014 into dir where printer = printer.
TEXT file name
CONCATENATE dir printer bt-userid bt-zdate sy-uzeit bt-seq '.txt'
INTO zfilename.
CONDENSE zfilename no-gaps.
Done filename
CONCATENATE dir printer bt-userid bt-zdate sy-uzeit bt-seq '.done'
INTO zfilename2.
CONDENSE zfilename2 no-gaps.
clear bt.
refresh bt.
concatenate 'put' '\pabi29.txt' zfilename
into cmd1 separated by space.
if cmd1 ne ' '.
call function 'FTP_COMMAND'
exporting
handle = hdl
command = cmd1
compress = compress
tables
data = result
exceptions
command_error = 1
tcpip_error = 2.
IF SY-SUBRC NE 0.
message e021 with 'bar tender is not submited due to error in RFC'.
endif.
loop at result.
write:/ result.
endloop.
ENDIF.
refresh result.
endif.
concatenate 'rename' zfilename zfilename2 into cmd2 separated by
space.
if cmd2 ne ' '.
call function 'FTP_COMMAND'
exporting
handle = hdl
command = cmd2
tables
data = result
exceptions
command_error = 1
tcpip_error = 2.
if sy-subrc eq 0.
MESSAGE w044(zv).
ELSE.
message e019 with 'RFC ftp_command problem'.
endif.
loop at result.
write:/ result.
endloop.
refresh result.
endif.
if cmd3 ne ' '.
call function 'FTP_COMMAND'
exporting
handle = hdl
command = cmd3
tables
data = result
exceptions
command_error = 1
tcpip_error = 2.
loop at result.
write:/ result.
endloop.
refresh result.
endif.
call function 'FTP_DISCONNECT'
exporting
handle = hdl.
thanks in advance.
Regards
pabitraWell may be the reason is that you are running report from SAP console.
SAPFTP is just an RFC destination which is actually pointing to an exe file on your frontend. filename is 'sapftp' and it is installed with your GUI frontend installation. May be while running through web console it is having problems accessing this file.
As a solution, why don't you use the rfc destination for the application server. It is called SAPFTPA. So instead of ws_download, you can save the file on application server through OPEN dataset ... ABAP commands. Than from application server ftp it using the same logic as it is in existing program. Just be sure to use the rfc destination SAPFTPA.
Hope this helps.
Cheers. -
How to read Update log/RFC Log IN SMSY programatically ?
Hi all,
In SMSY we have option to look at <b>update log/RFC Log</b> which shows the connection status for each RFC connection. there are cases where the connection has failed and we get logs as shown below
Start of automatic data capture with source 'RFC_CALL'
Start of data capture for system 'A1D'
Get clients for system 'A1D'
Clients for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Get software components for system 'A1D'
Software components for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Determine the installed Support Packs for the system 'A1D'
Support Packs for system 'A1D' determined by RFC destination 'SM_A1DCLNT010_READ'
Get clients for system 'A1D'
Clients for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Get server and instances for system 'A1D'
Server for system 'A1D' found in RFC destination 'SM_A1DCLNT010_READ'
Start of data capture for system 'AAE'
Get clients for system 'AAE'
Clients for system 'AAE' found in RFC destination 'SM_AAECLNT010_READ'
Get software components for system 'AAE'
Software components for system 'AAE' found in RFC destination 'SM_AAECLNT010_READ'
Determine the installed Support Packs for the system 'AAE'
Support Packs for system 'AAE' determined by RFC destination 'SM_AAECLNT010_READ'
my question is:
1) what does these logs signify
2) how to read these logs in program and based on what selection
need ur inputs on this....
Best regards,
SubbaFOUND...
-
Hi,
My redo log backup failed and I've no clue on the errors. Below is the job log. Please advise. TIA !
Job started
Step 001 started (program RSDBAJOB, variant &0000000000064, user ID BACKUP_USER)
No application server found on database host - rsh/gateway will be used
Execute logical command BRARCHIVE On host bering
Parameters:-u / -jid LOG__20090313130000 -c force -p initprd.sap -cds
SXPG_COMMAND_EXECUTE(LONG)
COMMANDNAME = BRARCHIVE
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = bering
DESTINATION = SAPXPG_DBDEST_BERING
BR0002I BRARCHIVE 7.00 (32)
BR0181E Option '-cds' not supported for 'disk'
BR0007I End of offline redo log processing: aeactnyg.log 2009-03-13 13.00.19
BR0280I BRARCHIVE time stamp: 2009-03-13 13.00.21
BR0005I BRARCHIVE terminated with errors
External program terminated with exit code 3
BRARCHIVE returned error status E
Job finished
DLHi,
You tried to backup redo log on disk.
Option -cds (create second copy, delete and the first copy serial) is not supported when you do a redolog backup using disk as backup device type.
Try to change the option to -sd (save first copy and delete)
rgds,
fendhy. -
Dear expert,
I read some message about user sapsys. However, i still could not understand the concept or running mechanism.
please give me a clear explanation. where can i find this user ? why was there such user sapsys in sm50?.
thank you very much.HI,
Sapsys is used for internal purpose in SAP server and is not harmful. But if it increases it can be logged off as well. But in many cases sapsys is used for OS jobs, CCMS monitoring hence it may impact if not handled carefully
SAPSYS is a group. It's used for DEV - QA - PRD to share files (especially /usr/sap/trans), for <SID>adm and ora<SID> to talk to each other and share files also.
SAPSYS is a user group name in sap os .SAPSYS is an internal communication user, which access the tables from the dictionary and give access to the users.
Check in SM21 and ST02,
Thanks
Ramakrishna.
Maybe you are looking for
-
I have two iPads, one is my son's machine. Previously he had an IPad 1 and mine was an ipad2. The iPad 1 died so I bought myself a new ipad4. I have only one appleID for both machines but created two Game centre accounts as there is a couple of games
-
MacBook Pro Connection Problem
I just purchased a new MacBook Pro and when i took my laptop to my college to do some homework it said i could not connect to the internet because it was not secure. I know the school has secure wifi, what can i do or what does that mean?M
-
Hello Is it possible to create detailed balance sheet at Profit Centre level.Though in GL reports(SLR) it gives all data except results after assesment,and in PCA reports it only gives expenses details,no B?s account are there. I try to transfer A/R+
-
Why does the same collection keep doing soft pulls on my credit
I have 2 soft pulls from the same collection. I don't want to call them and they are located in florida. I am located in CT. most of my previous collections were either from NY or CT. why don't they just call or mail me the bill to my house. I am als
-
Specified Folder is Not Writable
Since installing the 1.1 upgrade I get an error when trying to export to my My Pictures folder. (Specified Folder is Not Writable). I've seen a comment on the web stating that 1.1 has a problem writing to folders with a custom icon. I haven't changed