RFC Look Up APIs for a IDOC Receiver Communication Channel

Hi,
Can we use RFC Look Up APIs in UDF for a IDOC Receiver Communication Channel. (File to IDOC Scenario). Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Best Regards,
Madan Agrawal

As the name suggests, RFC lookup uses RFC receiver channel only. In mapping of your File to Idoc scenario, you may perform this lookup.
Requirement is to send a notificaiton when IDOC got posted with IDOC number.
Configure ALEAudit for this requirement. How were you planning to use RFC lookup for such a requirement?
Regards,
Prateek

Similar Messages

Problems in IDOC receiver communication channel

Hi,
I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
Please assist.
Rgds
Kishore

OK in that case, we are getting the following error in the Message monitoring:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
<SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
<SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
Please check and assist.
Rgds
Kishore

RFC , IDoc , XI and JDBC receiver communication channel--- Good Design

Hi Experts,
We have developed around 60+ interfaces on PI7.1 EHP1, in that 20 interfaces sending data to Data Base using JDBC receiver communication channel, 15 interfaces ABAP inbound proxy using XI adapter,10 Scenarios using IDoc receiver channel and 15 scenarios using RFC receiver channel.
But I have created only one IDoc, XI , JDBC and RFC channel.
Is it right idea/design or do I need to create more channels to handle multiple request.
Please share your thoughts on this.
Regards,
JAM

Hi,
For XI,RFC and Idoc when it's pointing to one SAP system you don't need any further comm channels.
For JDBC , if you are pointing to only one database you can use the same channel, if the target/databse changes you need more comm channels.
Your Design is as per the standards.
Regards,
Sainath Chutke

Dynamic user credentials for XI receiver communication channel

Hi Experts,
I am working on File(XML ) to ABAP proxy scenario. I want to know if I get the user-id and password information to login to R/3 system as part of the XML payload, can I use this information to connect to R/3 system in my XI Receiver communication channel?
Using a generic user credentials either in RFC destination or specifying it in communication channel configuration will not work. This is because the requirement is that the objects that will be created in inbound ABAP proxy (for ex Material Master) should be created with the user information that is coming from payload rather than a generic user.
Any pointers how to acheive this?
Thanks and regards,
Prasad
Edited by: Prasad MLN on Nov 16, 2009 4:00 PM

Hi,
You might want to learn more about Principal Propagation in sap XI:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID2039785750DB21057082877817322485End?blog=/pub/wlg/7068%3Fpage%3Dlast%26x-order%3Ddate
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/0f16bef65c7249e10000000a155369/content.htm
Regards,
Ravi Kanth Talagana

Intermittent problems with a RFC receiver communication channel.

Hello.
I want to know how to get the total channel history for a RFC receiver communication channel (in RWB only last 5 calls are available).
We use this communication channel in a java mapping to run a RFC of the abap engine of XI. Sometimes the rfc doesn't work and mapping throws a mapping transformation exception. Then, without a modification, we reprocess the message in SXMB_MONI and it is processed without errors. We think that it could be caused by a huge message volume.
How can I get the maximum number of rfc calls that the rfc communication channel can admit simultaneously. Which parameters have influence in these calls?
Thank you very much.
Alberto.

1. Increase the maximum connections
from help.sap.com
Additional Parameters
Parameter ~~~~ Entry
Maximum Connections ~~ Maximum possible number of initial connections required between adapter and sender system. This value is limited internally to a maximum of 50.
2. /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

Recordset structure in receiver communication channel

Hi gurus!
I have a problem with my receiver communication channel it says "Unknown structure 'Headers' found in document', probably configuration error in file adapter (XML parser error)'"
It's for sure that the problem is in the configuration of the adapter.
My scenario is from iDoc to File and i need to write only one header and many Lines, i made the data type like:
Headers
---Header
Lines
---Line
And the problem is in the configurarion of the recordset structure and the lines below.
If you know another way better to make the data type to acommplish what i've to do, just tell me I just made it that way because i thought it could work.
If something is not clear just let me know, what i more need is the config. of the receiver adapter.
Thanx in advance.
Juan

Hi Juan
If i understand correctly .. you are doing FCC on your receiver communication channel...and the following is your Target Data type
Headers
---Header
Lines
---Line
and FCC parameters you created are as below
Recordset structure: Headers,Header,Lines,Line
Header.fieldSeparator \r\n
Header.endSeparator \r\n
Line.fieldSeparator \r\n
Line.endSeparator \r\n
If the above data is correct, then I would like you try out the FCC parameters in my previous post. Because in the FCC parameters, you used only substructures(Header and Line) and you did not mention the lists ( Headers and Lines). That's why i think it is errored out.
If my interpretation is wrong, please let me know where i went wrong, i will try to look at again.

Error in JDBC receiver Communication Channel

Hi,
I am facing a problem at receiver communication channel of JDBC adapter. I am gettting the error as,
"com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency(5,000 concurrent Messages) and no free resourse found within 5,000 milliseconds; Increase the maximum Concurrency Level."
I am having the configuration on 4 different nodes. but suddenly only 1 out of 4 is working fine but remaining 3 are throwing this exception. It says to increase Maximum Concurrency level but i want to send only one message through one channel.
Is there a way to rectify this error. I am in deep trouble.
can anyone help me out in solving this issue, Its very greatfull if you do the needy.
Thanks,
Soorya,

Hello Aarthi,
I have gone through the link which you have provided for me in this regard. But i am not clear why those values,
AFW.Call.maxConsumers 10
AFW.Recv.maxConsumers 5
AFW.Rqst.maxConsumers 10
AFW.Send.maxConsumers 5
JDBC_http://sap.com/xi/XI/System.Call.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Recv.maxConsumers 10
JDBC_http://sap.com/xi/XI/System.Rqst.maxConsumers 20
JDBC_http://sap.com/xi/XI/System.Send.maxConsumers 10
These are concerned to MS only but not at JDBC adpater.
We have to look at JDBC prospective but not at the MS prospective.
So can you please look into the issue as JDBC adapter perspective.
Its like this that, there are 5000 messages are waiting for the free resource with in the next 5secs and as it is reached maximum concurrency of 1.
So my question here is,
Is there only one option to increase this value to 2 or more?
Or else do we have any other option to overcome this problem.
Please reply to this ASAP.
Thanks,
Soorya.

REG: Receiver Communication channel

Hi All,
What are different receiver communication channels used to send data to a SAP system?
Thanks in advance,
Siva.

Hi,
in XI3.0/PI7.0 the available adapters from XI to R/3 are IDOC, RFC and XI for proxy communication.......
in PI7.1 all of the above and WS for Web Service Reliable Messaging is also available.........
Regards,
Rajeev Gupta

Error in Receiver Communication Channel in FCC

I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
   <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
   <xsd:complexType name="DT_RecordIB">
      <xsd:sequence>
         <xsd:element name="Records" type="xsd:string" />
      </xsd:sequence>
   </xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure                                  Records
Records.fieldSeparator             'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj Singh

Hey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh

Regarding the JDBC Receiver Communication Channel error

Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.

Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not

Error in HTTP_AAE receiver communication channel, PI 7.4 dual stack

Dear Experts,
I am facing the below certificate error in HTTP_AAE receiver communication channel while using the third party (bank) private key. Third party bank server is HTTPS enabled, moreover they have generated the public and private keys on their server, and they shared the corresponding private keys in .p12 format to us. Our scenario in SAP PI is synchronous ABAP Proxy to HTTP_AAE, when I see the message in SXMB_MONI after testing, we get he below certificate error, though we have provided the correct path from keystorage view and keystorage entry in HTTP_AAE receiver communication channel
“com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SENDING_HTTP_REQUEST, sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target”
We have imported the private key provided by bank in Netweaver admin key storage, by following the below steps.
NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12 Key Pair->select the .p12 file->import.
Please see the attached doc for related screenshots.
Please experts help me experts as this is on high priority from client, also suggest me if I am doing anything wrong here.
Thanks,
Farhan

Hi Farhaan,
do you have only one certificate or multiple certificate? HTTPS can have 2 or 3 certificates (Root, Intermediate [optional, if any 3rd party person is there in the middle then we can get this certificate] and system certificates).
The issue is with the certificate and it can be because All the certificate is not present or path is not correct.
Please refer the below wiki in which solution is given for this peroblem.
Troubleshooting 7.1 - End-User Experience Monitoring - SCN Wiki
The similar issue is resolved by applying SP level patch, please refer the below discussion
SAP PI 7. 3 HTTP_AAE Receiver with SSL
Please check the below blog -
Configure the HTTP_AAE receiver communication channel with SSL
please also check the below discussion
Where to Import Clients SSL certificate for HTTP_AAE
regards,
Harish

SMTP Receiver Communication Channel error: connection refused

Dear all.
When migrating processes from XI 3.0 to PI 7.1 we run into the problem that we can't get the SMTP Receiver Communication Channel working on PI. We get the following error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect
(The NetWeaver Administrator log shows the following:
unable to call the mailer: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.net.ConnectException: Connection refused: connect)
- We copied all configuration settings 1-on-1 from XI to PI, and double-checked we made no mistakes.
- We confirmed the PI system can in fact reach the mailserver by successfully sending Email from the ABAP stack of the PI system (transactions SOST and SCOT)
- When deliberately mistyping the mailserver URL, we get the error: java.net.UnknownHostException. This makes me believe that the 'connection refused' error we get (after re-entering the correct mailserver URL) is indeed coming from the mailserver. But why would it refuse the connection if it allows the connection from the ABAP stack of the same server? And why didn't we run into any such problems on XI?
Any help is much appreciated!
Kind regards,
Eddy Driessen.

Hi All,
We have upgraded our XI3.0 system to PI7.1 and currently performing testing for different adapters. We are also facing similar problem for a scenario File to Mail
19.11.2010 11:31:56     Error     Mail: error occured: java.net.UnknownHostException: [url]
19.11.2010 11:31:56     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
19.11.2010 11:31:56     Error     Adapter Framework caught exception: Failed to call the endpoint
19.11.2010 11:31:56     Error     Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to:                     com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null " null"];                     nested exception caused by: java.net.UnknownHostException: [url].
19.11.2010 11:31:56     Information     The message status was set to WAIT.
*[url] = Mail server
Can anyone suggest the steps to solve this error
Thanks
Varun

Regarding Receiver Communication Channel (Concurrency problem)

Hi Masters ,
In Receiver Communication Channel which is connected to oracle data base ..while updating records Status from N to C . i am getting following errors :
**Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has reached maximum concurrency (5,000 concurrent messages) and no free resource found within 5,000 milliseconds; increase the maximum concurrency level**
Actually we are updating 10000 records status from N to C....... earlier it was updating in 30min now its hanging and giving above error ...... after 3 hrs its automatically displays updated succesfully message .
Can you help me to understand wht exactly happening and at wht level i have to do settings in communication channel so tht it should work properly..
Thanks in Advance.............
Jagannath.

Hi Jagannath
you can specify the maximum concurrency for receiver adapters. This defines the number of messages an adapter can process in parallel on a cluster node.
Enter the number of messages to be processed in parallel by the receiver channel. For example, if you enter the value 2, then two messages are processed in parallel. Default value is 1 and this means only one message can be processed at a time by the receiver channel.
http://help.sap.com/saphelp_nw70/helpdata/EN/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
increase this parameter from 1000 to a higher value you required and you would not be facing such problem
Regards
sandeep
If helpful kindly reward points

FCC in Receiver Communication Channel

Hi Frnds,
i did FCC for below message , but its not working can any one help me onthis
I want to implement File Content Conversion in receiver communication channel.
DataString is 1:Unbounded
<Records>
<DataString>1234567892222222222222222222222</DataString>
<DataString>4567899998728379023479565222222</DataString>
<DataString>5678903562634730632758579738458</DataString>
</Records>
Flat file format looks like this
234567892222222222222222222222
4567899998728379023479565222222
5678903562634730632758579738458
regards,
Raj

if it is the multiple occurence of the DataString that you want to take care off then refer this blog which deals with a similar approach:
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
regards,
Abhishek.

RFC Look Up APIs for a IDOC Receiver Communication Channel

Similar Messages

Maybe you are looking for